KVM-9000
Contents
1. 10 3 4 Daisy Chain Connection Diagram 11 E EM edulis m oco 12 3 6 On Screen Display Operation 13 Appendix A Trouble Shooting 17 Safety Instructions Before getting started read the following important cautions The KVM 9000 does not come equipped with an operating system An operating system must be loaded first before installing any software into the computer Be sure to ground yourself to prevent static charge when installing the internal components Use a grounding wrist strap and place all electronic components in any static shielded devices Most electronic components are sensitive to static electrical charge Disconnect the power core from the KVM 9000 before making any installation Be sure both the system and the external devices are turned OFF Sudden surge of power could ruin sensitive components Make sure the KVM 9000 is properly grounded The brightness of the flat panel display decreases with usage However hours of use vary depending on the application environment The flat panel display is not susceptible to shock or vibration When assembling the KVM 9000 make sure it is securely installed Do not open the system s back cover If opening the cover for maintenance is a must only a trained technician is allowed to do so Integrated circuits on computer boards are sensitive to static2. Now the PC connections can be made with the monitor VGA connections first Connect a VGA cable 15 pin HDDB male male with the male side to both of the PC and the rear panel of the KVM switch to the connector labeled VGA Repeat this for all PCs Connect the first computer s mouse cable to the KVM 9000 If using a PS 2 cable connect one end to the PS 2 mouse port on the computer while the other end is connected to the PC1 PS 2 mouse port on the back of KVM 9000 4 Connect the first computer s keyboard cable to the KVM switch When another PS 2 cable is used connect one end to PS 2 keyboard port on the computer while the other end is connected to the PC1 keyboard port on the back of KVM 9000 If your computer has an AT type keyboard port you will need a PS 2 to AT keyboard adapter 5 Double check all of the connections You can check the color of the keyboard and mouse connectors to make sure the keyboard and mouse cables go to the correct ports 6 Repeat step2 to 5 for the remainder of the computers Attach the power supply to the KVM 9000 unit and plug the other end into an electrical receptacle Now you will see the LED for Port 1 light up and you will hear a beep 3 3 Usage 3 3 1 Power Supply When you power on the KVM 9000 it will ask you for the password the default password is eight zero 00000000 Please key in eight zeros and enter the same value in the retyped field NOTE f you are not fa
3. Keyboard Emulation PS 2 Mouse Emulation PS 2 VGA Resolution 1024 x 768 Bandwidth 200MHz VVVVV VY VY VY V NN WV v Daisy Chain MAX Level 8 levels MAX PC Connection 120 Housing Metal Power 110 220 AC Operation Temperature 0 40 C Storage Temperature 20 60 C Humidity 0 90 non condensing Size 19 1U high rackmount Dimensions cm 44 24 x 4 4 x 55 0 1 3 System Requirements E Specifications Console Built in VGA monitor Built in PS 2 keyboard Built in PS 2 touchpad To Computers 15 pin HDB male to male VGA cables x 8 PS 2 cables male to male for keyboard x 8 PS 2 cables male to male for mouse x 8 This page intentionally left blank Chapter 2 Unpacking 2 1 Opening the Delivery Package The KVM 9000 is packed in an anti static bag The board has components that are easily damaged by static electricity Do not remove the anti static wrapping until proper precautions have been taken Safety Instructions in front of this manual describe anti static precautions and procedures 2 2 Inspection After unpacking the board place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment Ground the board and exercise extreme care to prevent damage to the board from static electricity Integrated circuits will sometimes come out of their sockets during shipment Examine all integrated circuits particularly the BIOS processor memory modules ROM Dis
4. electricity To avoid damaging chips from electrostatic discharge observe the following precautions Before handling a board or integrated circuit touch an unpainted portion of the system unit chassis for a few seconds This will help to discharge any static electricity on your body When handling boards and components wear a wrist grounding strap available from most electronic component stores Safety Approvals CE Marking CE Compliance This equipment is in compliance with the requirements of the following regulations EN 55 022 CLASS B FCC FCC Compliance This equipment has been tested and found to comply with Part 15 of the FCC Rules Operation is subject to the following conditions 1 This device may not cause harmful interface 2 This device must accept any interference received including interference that may cause undesired operation Chapter 1 General Description ar SP TM TC TT PC a vn X11 L7 7 71 Controlling multiple PCs from one keyboard mouse and VGA monitor the KVM 9000 is loaded with such features as 19 rackmount size daisy chain up to eight units On Screen Display menu password security PC server name search hot key control front panel push button and auto scan control It has a complete keyboard and mouse emulation for simultaneous PC boot up process 1 1 Features The KVM 9000 comes with the following hardware features gt Slimmest 19 1U high full size rackmo
5. of Intel Corporation Award is a registered trademark of Award Software Inc AMI is a registered trademark of American Megatrends Inc All other trademarks products and or product names mentioned herein are mentioned for identification purposes only and may be trademarks and or registered trademarks of their respective companies or owners Copyright 2004 BOSER Technology Co lid All Rights Reserved Edition 10 April 13 2004 Table of Contents Chapter 1 General Description 1 UNES RET 2 1 4 OTN SOI saeeeedeeaetoierobirobiezsaerbtblareisldreakkeeiglddioldili 2 1 3 System Requirements eese 3 Chapter 2 Unpacking eseseseseseseseseseseseoes D 2 1 Opening the Delivery Package 5 Z4 MS DOCUO sass2xsiniosschiogiiplfoie930 6120sua0ssvtisistgttideuaOtsikivsawsveie 5 Chapter 3 Hardware Installation 7 3 1 Connector Diagrams eeeeeeee e eeee enne 7 3 2 Hardware Installation 8 Gor SSH B aontasevzcasdierkaixcsatisUasus unice Dutic Dualletstce peau Dems iva ee bct an usce Uu cuE 9 3 4 1 Power SU III V 9 3 3 2 7 segment LED Intlicafi0ni e 9 3 3 3 Keyboard Hot Key Commands
6. KVM 9000 19 1U High Full size Rackmount Chassis 19 1U Height Full size Rackmount Chassis 8 port KVM Switch e LCD Keyboard Touchpad Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing BOSER Technology Co Ltd the manufacturer and publisher is not liable for any infringements of patents or other rights resulting from its use The manufacturer will not be responsible for any direct indirect special incidental or consequential damages arising from the use of this product or documentation even if advised of the possibility of such damage s This manual is copyrighted and BOSER Technology Co Ltd reserves all documentation rights Unauthorized reproduction transmission translation and storage of any form and means 1 e electronic mechanical photocopying recording of this document in whole or partly is prohibited unless granted permission by BOSER Technology Co Ltd BOSER Technology Co Ltd reserves the right to change or improve the contents of this document without due notice BOSER Technology Co Ltd assumes no responsibility for any errors or omissions that may appear in this manual nor does it make any commitment to update the information contained herein Trademarks BOSER is a registered trademark of BOSER Technology Co Ltd ISB is a registered trademark of BOSER Technology Co Ltd Intel is a registered trademark
7. e same PC name Note5 E E On Screen Display Menu Example A To access a computer attached to Port 6 of the fifth Bank you can press the hot keys as below Scroll lock Scroll lock 5 0 6 To access a computer attached from Bank 3 to Bank 4 you can press the hot keys as below Scroll lock Scroll lock Page Down NOTE1 You also could press up arrow key or down arrow key for a period of time to speed up selecting the destination port NOTE2 The default Beeper function is ON and beeper control is only available for Scan Mode NOTES 7o get out of Auto Scan Mode press any key or SPACE bar NOTE4 Password not included NOTES Search for PC name starting from 1 PC port NOTES Bank no and Port no selection must be made using the numeric keys on the keyboard Numeric keys on the keypad are not available as a hot key command 3 4 Daisy Chain Connection Diagram Please use the attached 3 foot 3 in one daisy chain cable kit for the KVM 9000 A Connect keyboard mouse and monitor to the console port white color block of bank 1 KVM 9000 B Useone end of 3 in one cable kit to connect the daisy chain port of bank 1 while the other end for the console port white color block of bank2 KVM 9000 C Please repeat item B to daisy chain more banks as you want But the maximum daisy chain bank is eight D Before chaining the slave bank up to six banks you need a VGA extender betw
8. een the fifth bank and the sixth bank to enhance the VGA signal 11 iE llli 11111111 cess iiiiiiii 11111111 M i la am L ca E 3 5 Hot Plug The KVM 9000 supports Hot Plug function for easy addition or removal of PCs The user can arrange or maintain PCs as follows a APC can be disconnected and reconnected to the same or different port of the KVM 9000 unit without having to power it off as long as it is not the Daisy chain port or does not pass through port b You may unplug the mouse or the keyboard from the console port and plug it back in at any time NOTE Some O S Operation Systems like SCO Unix are unable to support Hot Plug function If you apply Hot Plug to this kind of O S it will cause unpredictable behavior or shut down the PC Before attempting to use Hot Plug please make sure your O S and software driver supports the Hot Plug function 12 3 6 On Screen Display Operation When you pop up the OSD menu window going through the hot key is popped up you will see the following small windows on your monitor a The 1 line bar is Bank no b The 2 block is your PC system name list You will find the system number list from 01 to 8 You can define your PC name in a maximum of 8 characters The factory default names for all ports are SYSTEM 01 to SYSTEM 08 Besides the sun symbol near the PC name represents the PC system that is powered on To use up arro
9. elect CONSOLE ON it means that any user can use the console If you select CONSOLE OFF OFF state by default it means that any user will not be allowed to use the console unless you enter the password E When you finish the setting up of PC name and exiting the OSD setting mode you will find the PC name is showed on the top left corner of the monitor Now you can use ESC key to clear the message right away if you don t need it F If you want OSD to return back to factory default value you can execute SCROLL LOCK R keys in this order The seven segment LEDs on the front panel will flash during the refresh process ROM REFLASH When the OSD value is back to default setting the seven segment LEDs on the front panel will stop flashing 15 16 This page intentionally left blank Appendix A Trouble Shooting Make sure that all cables are well seated Label all of cables with the number for each respective computer to avoid confusion The recommended VGA and PS 2 cable distance is 5 meters maximum without ghosting and degradation Normally the cable length is based on driver capacity of your VGA card and PS 2 port If you need longer VGA or PS 2 cable please use VGA and PS 2 extender to accomplish your applications Don t press any keys on the keyboard while the selected computer is booting up otherwise it might cause the keyboard to err or not to be detected by PC The booting of comput
10. er is fine but keyboard doesn t work meaning that you have to Make sure the keyboard port works on the computer Try an independent keyboard with the computer If the mouse is not detected during the booting up of the PC it means that you have to Make sure the mouse port works on the computer Try an independent mouse with the computer Avoid moving the mouse or press the mouse button when switching ports Avoid switching ports during shutting down the PC Switch one PC port to another by setting the scan time at 5 sec or more Normally it takes a few seconds for the VGA monitor to change from one resolution mode to another If forgetting the password you typed please contact your supplier 17 18 This page intentionally left blank
11. k and keyboard controller chip to ensure that they are firmly seated The KVM 9000 delivery package contains the following items KVM 9000 x 1 AC to DC Power adapter x 1 Daisy Chain cable x 1 Rackmount Kit x 2 User s Manual The KVM 9000 system along with its accessories is packed in several bags and boxes all packed in one carton Before you start carefully read the safety instructions in front of this User s Manual It is recommended that you keep all the parts of the delivery package intact and store them in a safe dry place for any unforeseen event requiring the return shipment of the product In case you discover any missing and or damaged items from the list of items please contact your dealer immediately This page intentionally left blank Chapter 3 Hardware Installation Before installation please make sure all of peripherals and computers have been turned off Connector EN PS 2 Keyboard Cable Male to Male PS 2 Mouse Cable Male to Male Male to Male AT to PS 2 KB adapter optional ud 5 pin Male to 6 pin Female bo PS 2 to DB9 adapter optional fr pw 6 pin Female to 9 pin Female VD 3 2 Hardware Installation 1 Find a convenient place to put your KVM 9000 When mounting to a rack attach the included brackets to the sides of the KVM 9000 Take note of the length of your cables so that your computers keyboard mouse and monitor are distanced properly
12. miliar with the operation of OSD menu please don t change the password i e keep default at eight zero 00000000 value otherwise if you have set the password and unfortunately forget the password you need send it back to your distributor for maintaining the password 3 3 2 7 segment LED Indication 8 When you select one of the eight PC ports and this PC is shut down or this PC port is disconnected to the PC the selected port LED will flash When you select one of the eight PC ports and this PC is powered on the selected port LED is lit am tt 3 3 3 Keyboard Hot Key Commands You can also conveniently command the KVM 9000 by switching ports through simple key sequences To send commands to the KVM 9000 the SCROLL LOCK key must be pressed twice within 2 seconds You will hear a beep for confirmation and the keyboard is in hot key mode If you have not pressed any key in hot key mode within 2 seconds the keyboard will go back to normal Operation System control state Below are the different hot key commands within 2 seconds Scroll Lock t ODE EMEN Scroll S Lock EE P Scroll Lock t IEEE rr Scroll Lock t ODE EMEN Scrol Lock EE EMEN Scroll Lock t Seroll E Scro Previous Channel Next Channel Note1 Previous Bank Next Bank P BI No Beeper Note2 Auto Scan Note3 OSD default value Note4 ROM REFLASH ae S E E Search for th
13. unt 8 port KVM switch with LCD keyboard touchpad design Supports MS Intellimouse Intellimouse Explorer Logitech Net Mouse or the other fully compatible MS mouse Provides Console PS 2 to PC serial mouse conversion Supports DOS Win3 X Win95 98 98SE 2K ME XP WinNT Netware SCO UNIX HP UNIX Linux Hot plug add PCs or remove connected PCs for maintenance without powering down the KVM switch or PCs Very high video quality up to 1024 x 768 bandwidth 200MHz No software required easy PC selection via On Screen Display manual push buttons and hot keys Supports eight characters password protection and search for PC server name Auto scan mode for monitoring PCs and flexible scan time is 5 99 Sec Keyboard status restored when switching PCs LED display for easy status monitoring Buzzer sound for switching port confirmation Using standard VGA keyboard and mouse cable One extra built in daisy chain port and without wasting any PC port No DIP switch setting needed and auto detect daisy chain bank 1 2 Specifications PC Port 8 Console Port 1 PC Port Connector All Female Type PS 2 6 pin Mini DIN keyboard PS 2 6 pin Mini DIN mouse 15 pin HDDB VGA Daisy Chain Port Connector All Female Type PS 2 6 pin Mini DIN keyboard PS 2 6 pin Mini DIN mouse 15 pin HDDB VGA PC Selection On Screen Display menu Hot Key Push Button 7 Segment LED One bank LED two PC port LEDs On Screen Display Control Yes Scan Intervals 5 99 sec
14. w key 4 or down arrow key to select port for destinated PC name After you have selected the PC port already you can press the ENTER Key to switch the PC port you want immediately To use PgUp key or PgDn key for selecting previous or next Bank no or Box No After editing a PC name by pressing the INS key please press Enter key for saving the information 13 To use Tab key to select items like Bank OSD SCAN CHANGE PASSWORD CONSOLE ON OFF etc A The OSD 10 SEC means that the OSD windows displays or PC system name exists for 10 sec on your monitor You can modify it from 05 sec to 99 sec The factory default value is 10 sec B The SCAN TIME means that scan interval from one PC port to next PC port The default SCAN time is 10 sec and the maximum scan time is 99 sec C The CHANGE PASSWORD is for user to avoid all PC systems to be intruded by the other person The default password is 8 digits 00000000 CAITER DACCIAINEBN N I CT m PosoV V mu An ENTER PASSWORD window will show when you select this item and then press the Enter Eight digits is the maximum for the password After keying in the password press the Enter key Another window for confirming your typed password will show You need to retype the password to check whether it is confirmed to be right or not 14 D The CONSOLE ON OFF means to manage the KVM 9000 If you s
Download Pdf Manuals
Related Search
KVM 9000 kv9000 km9000 wireless keyboard km9000 wireless keyboard manual kvm1000 kv9004a kv900-1000 kv90022