Checklist Headset - innovaphone-wiki
Contents
1. Checklist Headset 1 Product Vendor Source Name Description Order ID device Name Order ID USB adaptor Name Order ID 1P200 adaptor 2 Description innovaphone AG Boblinger Str 76 71065 Sindelfingen GN Netcom GN Netcom GN 9120 Midi Boom NF Mic w e RHL DECT Mono over the ear style DECT wireless Headset with base station and charging unit For use business desk telephones 9120 48 11 none Not needed The GN9120 is a DECT based wireless mono over the ear style headset with docking station The docking station both works as a charger and adapter to the desk telephone Being DECT based it features a siginificant larger reachout than comparable Bluetooth or Infrared solutions Also battery capacity lasts longer due to the power saving mechanisms built in to the DECT system 2 1 Functions Criteria Headset Detection works Basic function hearing ok Basic function speaking ok Perceived volume similar to handset Perceived volume at remote end ok Comprehensibility of remote end Comprehensibility at remote end No background noise no distortion Comprehensibility also with strong background noises in the area No echo in both directions Sits firmly at the head GN 9120 vom 11 08 05 gedruckt am 15 08 05 1P200 1P200A IP100 No No n a Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes See Yes See Yes remarks remarks Ok Ok Ok Ok Ok Ok See remarks Not tested Yes Yes Yes Yes Yes Ye2. gs 3 2 2 Used with the GN1000 lifting device In that scenario the GN9210 is to be tied in to the handset cord as described in the manual We achieved best results when setting the sector switch to A or G The microphone volume dial is a bit critical because it is used for the handset and headset at the same time If the mircophone gain is to high a comfortably speaking with the handset isn t possible the sidegain is too high You have to adjust the microphone gain for the handset and use those values also with the headset With the standard values it is a bit to low You have to disable the headset manually in the IP200A s settings 3 3 1P100 3 3 1 Connected directly to the I P100 The IP100 does not feature a headset port so the GN9210 will be tied in to the handset cord as described in the manual We achieved best results when setting the selector switch to A or G and the volume match dial to approx 50 You have to switch off headset mode in the IP100 s user settings 3 3 2 Used with the GN1000 lifting device The GN9210 is connected to the IP100 as in 3 3 1 3 4 SoftwarePhone The GN9210 could not be used with the SoftwarePhone There is no Adapter available and it seems not be useful too Maybe a DECT Dongle can be used 4 Sales Channel TLK NT Plus In Germany contact innovaphone AG GN 9120 Seite 3 von 4 Compatibility Report GN 9120 Hans Werner Bormann Fon 040 30982542 Fax 040 30982543 hwbormann gnne
3. he headset detection does not work with the GN9210 so you have to enable the headset manually in the IP200 s settings Used with the GN1000 lifting device In that scenario the GN9210 is to be tied in to the handset cord as described in the manual We achieved best results when setting the selector switch to G The microphone volume dial is a bit critical because it is used for the handset and headset at the same time If the mircophone gain is to high a comfortably speaking with the handset isn t possible the sidegan is too high You have to adjust the microphone gain for the handset and use those values also with the headset innovaphone AG GN 9120 Seite 2 von 4 Compatibility Report GN 9120 You have to disable the headset manually in the IP200 s settings 3 2 IP200A 3 2 1 Connected directly to the I P200A The GN9210 can be connected to the headset port of the IP200A despite what the user manual recommends When using standard IP200A settings that is no tweaking of the analogue front end we achieved best results when setting the selector switch to F Be sure to have the headset always connected 0 Symbol at the charger station has to be on or to connect it before making any call When you put the headset into the charger it will automaticly disconnect and connect again when pulled off The headset detection does not work with the GN9210 so you have to enable the headset manually in the IP200A s settin
4. s erstellt am 28 06 05 von Christoph K nkel in G SOURCESAFETESTLAB ZERTIFIZIERUNGEN_GN NETCOMGN9210 DOC zuletzt ge ndert von Karsten Brauner am 11 08 2005 Compatibility Report GN 9120 Sits conveniently at the head even for longer use Acceptable Acceptable Acceptable 2 2 Features Criteria Remarks Mono single sided available Yes Duo double sided available No Micro flexible boom available Yes Micro fixed boom available Yes Over the head style available Yes Over the ear available Yes Around the ear available No Miscellaneous Incl Docking station 2 3 Restrictions The GN9210 features a remote hook switch that is you can accept and disconnect calls directly on the headset when not near to the telephone However this functions does not work with the IP200 To work around you may use the GN1000 mechanical lifting device see separate report 3 Configuration 3 1 1P200 3 1 1 3 1 2 Connected directly to the I P200 The GN9210 can be connected to the headset port of the 1P200 despite what the user manual recommends When using standard IP200 settings that is no tweaking of the analogue front end we achieved best results when setting the selector switch to F Be sure to have the headset always connected 0 Symbol at the charger station has to be on or to connect it before making any call When you put the headset into the charger it will automaticly disconnect and connect again when pulled off T
5. tcom de for details 5 Remarks The GN9210 can be worn comfortably over a long period of time The docking station provides for a convenient way of charging the headset while not in use The voice quality is very good for the remote end that is the party you are talking to while it is somewhat compromised at the local end There is no echo but it is a little bit noisy Especially when you connect the GN9210 directly to the headset port and you need the always on functionality it is really noisy and no more comfortable We recommend to use establish the DECT connection only when needed It is still fine for office use but rather not sufficient for hard core use such as in a call centre or the like Although the DECT functionality is packed in a very small housing it is still quiet heavy and you need to get used to it The coverage certainly depends not really on the characteristics of the area because it s DECT In our tests in a quite standard office environment we found that t works seamlessly within 25m innovaphone AG GN 9120 Seite 4 von 4
Download Pdf Manuals
Related Search