Washing Machine - Fisher & Paykel
Contents
1. Temperature Wash Rinse 1 Press this button to select your WASH and RINSE water temperature Selection may vary or change as per the program selected Select 2 Press this button to select the cycles you require This will also indicate the cycle progress and status of your wash program Program select 3 Turn the dial control knob to select the program you which to use Heavy Duty Use this program for durable full load Suitable for towels sports gear children clothes workwear Normal Use this program for normally soiled cottons and mixed fabric loads Whites Use this program for whites and light similar colored clothing Colors Use this program for light soiled dark or highly dyed natural fabrics such as cotton that may be susceptible to dye loss Bulky Use this program to wash large items such as comforters sleeping bags or blankets Delicate Use this program to wash lightly soiled garments and delicate items which require gentle washing Suitable items are embroidered items lingerie lace trimmed Also recommended to place inside a laundry wash bag Quick Use this program to wash small lightly soiled loads that are needed in a hurry Load Size Water Level 4 Load Size Water levels may be set at the beginning of the wash or in pause mode During Pre wash Wash or Rinse press this button to manually replenish water Release for the water to stop Function automat2. Accessories Supplied Quantity I Hot amp Cold inlet hoses 2 2 Drain Hose Hook 3 Pipe Clip brace 4 Outer Drain Hose Unpacking Your Washer Remove all packing materials This includes the foam base and all adhesive tape holding the washer accessories inside and outside Open the top lid to remove the drum brace Pull to remove NOTE Save drum brace Reinstall when moving the washer Inspect and remove any remains of packing tape or printed materials before using the washer WARNING To avoid danger of suffocation keep plastic bag and other packing material away from babies and children Do not use this bag in cribs carriages and playpens The plastic bag could block nose and mouth and prevent breathing This bag is not a toy Leveling Your Washer Your washer has 4 leveling legs which are located on the four bottom corners After properly placing your washer in its final position you can level your washer Leveling legs can be adjusted by turning them counterclockwise to raise your washer or turning them clockwise to lower your washer Adjustable foot High Low WARNING Leveling of washer is very important to prevent vibration during spin 11 Steps for Installation Select a suitable location for the washer a hard even surface away from direct sunlight or heat source e g radiators baseboard heaters cooking appliances etc Any floor unevenness should be corrected w
3. Note Carefully inspect around the machine for any leaks and tighten any loose connections Caution If after completing these steps you are unsure that unit is properly installed contact a qualified installer To ensure that your washer is properly installed it is recommended that it be installed by a certified installer 13 ELECTRICAL REQUIREMENTS Earthing Instructions This appliance must be grounded In the event of an electrical short circuit grounding reduces the risk of electric shock by providing an escape wire for the electric current This appliance is equipped with a grounding wire with a grounded plug The plug must be inserted into an outlet that is properly installed and grounded Improper use of the plug can result in a risk of electric A shock Consult a qualified electrician or service person if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded Wiring Requirements The washer must be plugged into at least OAMP 220 240 VOLT 50 HZ GROUNDED OUTLET If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Note If a standard two prong outlet is encountered it is the AS 0 E personal responsibility and obligation of the consumer to have it replaced with a properly grounded XS three prong outlet Extension Cords
4. We do not recommend that you use an extension cord CAUTION If this appliance is supplied from a cord extension set or electrical portable outlet device the cord extension set or electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture Power Interruptions Occasionally there may be power interruptions due to thunderstorms or other causes Remove the power cord from AC outlet when a power outage occurs When power has been restored re plug power cord toAC outlet If outage is fora prolonged period clean washer before using it again 14 SPECIFICATIONS Rated voltage frequency 220 240V 50Hz Rated washing spinning capacity 9 5kg 9 5kg Spin speed max 800rpm Inlet pressure 0 03 1 Net weight 73kg Dimensions mm 686 Depth x 686 Width x 1105 Height Note Default settings when you choose this program after power on Wash Estimated Process Time Min Wash Warm Cold Rinse 64 Hot Cold Spin Cold Cold Soak Warm Cold Wash Hot Cold Rinse Cold Cold Spin Wash Warm Cold Rinse Hot Cold Spin Cold Cold Soak Cold Cold heavily soiled durable Wash Warm Cold colorfast fabrics Rinse Hot Cold Spin Wash Warm Cold Rinse Hot Cold Spin Cold Cold Wash Warm Cold Rinse Hot Cold Spin Cold Cold Wash Warm Cold Delicate Cottons Linens and Rinse Hot Cold mixed garments Spin Cold Cold Fabric Type Temp Cottons Linens and mi
5. wool rayon or drip dry clothes Bleach dispenser is located on the front corner under the lid Fill the dispenser with the manufacturer s recommended dosage during the first water fill Be careful not to spill undiluted bleach onto the washer cabinet or your clothes Note Use only liquid bleach in dispenser CARE AND CLEANING GUIDE Warning Always unplug your washer to avoid electric shock before cleaning Ignoring this warning may resultin injury Before using cleaning products always read and follow manufacturer warnings to avoid personal Injury or product damage Cleaning and Maintenance Use only a damp or sudsy cloth for cleaning the control panel To avoid any kind of damage to cabinet finish wipe washer cabinet as needed If you spill liquid powdered softener bleach or detergent on the cabinet wipe cabinet immediately Do not use any abrasive harsh chemicals ammonia chlorine bleach concentrated detergent solvents or metal scouring pads These chemicals may dissolve damage and or discolor your washer Leave lid open after washing to allow inside of washer to dry and assist in preventing unwelcomed bad odours 7 Moving amp Vacationing Turn off water supply at the faucet and disconnect hoses Drain water from all hoses Disconnect electrical plug Dry inner wash tub If moving washer disconnect drain hose Turn the leveling legs clockwise all the way in Move and store your wash
6. Reduce detergent dosage or pre dissolve detergent before adding to wash Spots or stains on your clothes this is due to incorrect use of fabric softener Refer to manufacturers instructions onthe container and follow directions Clothes are grayed or yellowed this may be due to not using sufficient detergent for large loads Add more detergent to the load Clothes are ripped 8 holes excessive wear amp tear this may be due to sharp objects left in washing Remove all small loose sharp objects fasten belts zippers metal snaps etc Check if you are using undiluted bleach Never add undiluted bleach to wash LED Display Notes Trouble Codes Reasons Rinse and spin indicators flash Unit does not drain or the speed of draining is too slow The washer is out of balance Please open the lid All process indicators flash P and rebalance the load All water level indicators flash The water inlet time exceeds the preset time Medium and Small load size 27 Water overflow protection water level indicators flash Super 4 Large load size water level indicators flash The water level sensor fault Call service Beeps Top lid not close properly INSTALLATION INSTRUCTIONS Tools and Materials Required You will need to have following tools to help you with the installation of your washer Pliers Wrench Tape Measure Gloves Level 10
7. Haier Washing Machine USE amp CARE GUIDE MODEL HWMP95TLU TABLE OF CONTENTS PAGE IMPORTANT SAFETY INSTRUCTIONS 2 3 65 4 Parts and Featuresz iere diee iud 4 Operating instructions 5 CARE AND CLEANING 7 Cleaning and Maintenance cesses 7 Moving amp Vacationing 002102 8 TROUBLE 5 8 INSTALLATION 1 5 10 Tools and Materials 10 442 0 4 40 Steps for Installation 12 ELECTRICAL 6 14 Power Interruptions o espe ter Fee dete edo e eo Re Se ed aee ro akud 14 5 Back Cover IMPORTANT SAFETY INSTRUCTIONS Warning To reduce the risk of fire electric shock or injury when using your appliance follow basic precautions including the following Read all instructions before using the appliance 2 This appliance
8. er in upright position only To prevent mold or mildew leave lid open so moisture inside machine can evaporate Insert transporting bolts if you are relocating the washer Ensure removal prior to usage TROUBLE SHOOTING If washer does not operate Check the unit is plugged in The plug may have come loose Check if the electrical wall receptacle is of proper voltage Check if the circuit breaker needs to be reset or if the fuse needs replacing Check if the washer is overloaded load may need to be re arranged or redistributed evenly Check if the lid is open You may have to close the lid properly The washer pauses in some cycles This is normal in delicate or hand wash cycles which has short period of time You will not hear washer operation for a short period of time When the soak time is over it will start automatically Problems with water Not enough water coming out Water faucet may need to be completely turned on Hoses may be tangled or kinked Straighten out hoses Check water level selection it may need to be readjusted Water temperature is incorrect Check your water heater temperature Hot water needs to be at a temperature of at least 120 F 140 49 C 60 C Check to make sure the inlet hoses are properly connected E g Hot to hot amp cold to cold Water leaks This may be due to incorrectiy installed drain hose or fill hoses Your home drain may be clogged You may need to tig
9. hes which are stained spotted or washed in gasoline dry cleaning solvents or any other explosive or flammable substances that could ignite and explode Do not add or mix any flammable or explosive substances to the wash Do not try to remove clothes while the washer is in motion Wait until it comes to a complete stop The lid must be closed when the machine is in operation Do not use this appliance for commercial applications Do not operate this appliance unless all panels are properly intact The appliance is not to be used by children without adult supervision This appliance must be connected to an approved electrical outlet with 220 240V 50Hz power source Do not repair or replace any part of the appliance this can only be done by an authorised technician To reduce the risk of electric shock or fire do not use extension cords or adapters to connect the unit to electrical power source Ensure washer is kept free from obstacles Use the hoses provided OPERATING INSTRUCTIONS Parts and Features Top lid 7 Balance ring 13 HotWater Inlet Valve 2 Control panel Inner tub 4 Access Panel 3 Levelling feet 9 Pulsator D Door switch O Drain hose joint 5 Bleach injection inlet a Power Cord 220Volt 50Hz 6 Outer tub cover 3 Cold Water Inlet Value Operating Instructions Program Select Cycle Progress Pre wash 4 Wash Normal Sia Rinse p Cold Cold Spin Light e
10. hten hoses check the plumbing or call a plumber for assistance Water will not drain This may be due to not installing your drain hose correctly Check the position of the drain hose In order to drain properly make sure that top of drain outlet is less than 5 ft 1 5 m above the floor Washer is making noise Washer may need to be reinstalled Check washer installation section Washer load may need to be re balanced as the load may be uneven Coins loose change buttons or other heavy objects could create noise related sounds Squealing sound Due to overloaded wash tub Vibration Noise may be caused by not leveling washer properly on the floor or uneven distribution of clothes in the tub Normal Operating Sounds The following sounds are normally heard during the operation of the washer Tumbling sounds This is normal as the heavy wet clothes in the washer are continuously being lossed around Air rushing noise This happens when the washer tub spins at very high speeds Wash and Rinse cycles going on and off will also make clicking sounds Problems with clothes Clothes become excessively creased this is due to improper sorting overloading or washing in excessively hot water repeatedly Avoid overloading and resort your load Wash in cooler water Soap residue detergent may not be dissolved in water Check water temperature add detergent as wash tub is being filled with water
11. ically is inactive when water reaches the overflow protection level Soil Level 5 Press this option to select the soil level of your laundry There are 3 levels to choose from Normal Low and Light Normal Normally soiled clothes Low Low soiled clothes Light Lightly soiled clothes Each dirtier wash level will increase or decrease the wash time by 2 minutes Energy Label Program Temp Hot Cold Program Select Normal Load Size Super Soli Level Normal Loading the Washer When loading the clothes into your washing machine there are a few points to remember Separate the white from the colored items Separate heavily soiled items from light or delicate items Carefully check all pockets and cuffs for small items Remove pins and other sharp objects from clothing to avoid damages to the interior parts Pre treat all stains and heavily soiled areas for better result Load each item loosely For better results load smaller items in first followed by larger items Do not overload the washer When loading wet items keep water level high enough so items can float easily in the water Close the lid after loading the laundry With the lid open the washer will not start Note Please only use low sudsing or high efficiency type detergent Bleach use and dispenser Bleaching of clothes can help remove stains heavy soiling and kill bacteria Bleach should not be used on silk
12. is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 3 Use this appliance only for its intended purpose as described in this user and care guide 4 Use only detergents or softeners recommended for use in this appliance and keep them out of the reach of children 5 This appliance must be properly installed in accordance with the installation instructions before it is used 6 Never unplug your appliance by pulling on the power cord Always grasp the plug firmly and pull straight out from the outlet 7 Replace worn power cords loose plugs and power outlets immediately 8 Unplug your appliance before cleaning or before making any repairs Repairs should only be done by authorised technician 9 Do not operate your appliance when parts are missing or broken 10 Do not tamper with controls 11 not operate your appliance in the presence of explosive fumes or toxic flammable vapours 12 not use hot water that exceeds 60 C in temperature This refers to hot water entering the machine If temperature cannot be controlled use WARM wash only 2 13 20 21 22 23 24 Do notusethis appliance to wash clot
13. ith the leveling legs located on the bottom corners of the washer The washer must be placed at room temperature You must not place washer where the temperature is at below freezing For this machine having ventilation openings in the base make sure the openings must not be obstructed by a carpet Installing Your Washer Read installation instructions carefully before installation 1 not use water inlet hoses without a flat washer on each end The washer inthe coupling has to be placed firmly Flat water inlet hose washers are preinstalled in each end of the water inlet hoses New hose sets supplied with the appliance are to be used and that old hose sets should not be reused NOTE You may have to use pliers to tighten the coupling Do not over tighten because you may cause damage to the valve Cold water inlet hose Hot water inlet hose 2 Connect the hot and cold water inlet hoses to the hot and cold water faucet 12 3 Install the drain hose to the back of the washer using the drain hose clamp provided The drain hose must be placed into a drain pipe or sink at least 3 5cm in diameter Use the goose neck to fix the hose in place To avoid possible flush back of water the drain hose must be fixed at a minimum height of 1000mm and a maximum height of 1500mm Water Inlet Goose Neck Water Supply Hose Drain Hose 4 Plug the washer into a regular 220 24 0Volt 50Hz OAmp outlet
14. xed garments Heavy Duty White garments Dark and color dyed fabrics Whites Lingerie sheer fabrics with lace trim Cottons Linens and mixed garments These times are for reference only and may not match your model exactly Default settings 15
Download Pdf Manuals
Related Search