Home

WWWop ilipSocom/support

Contents

1. Network update You can update the software by connecting the unit to the internet 1 2 Follow steps 1 to 2 in Connection test on page 30 Press MENU on the remote control and then use 4 w 4 gt to select Setup gt Software gt Software update gt Network Use lt gt to select Yes then press OK This unit will then start checking for the latest firmware Version Confirmation message will appear Use lt b to select Yes then press OK The unit will start downloading the latest firmware version The unit will start updating the firmware version It may take a while to
2. Automatic 4 3 Wide screen Automatic Other than DTV and HDMI connected devices enlarges the picture to best fit the screen DTV and HDMI connected devices display the picture at its original size The subtitles may remain visible 4 3 Display a 16 9 picture at a 4 3 size the picture is shortened horizontally Sidebars appear on both edges of the screen Wide screen Display a 16 9 picture that is stretched horizontally and vertically For 16 9 1080i 1080p video signal Automatic 4 3 i K Unscaled Wide screen Automatic Other than DTV and HDMI connected devices enlarges the picture to best fit the screen DTV and HDMI connected devices display the picture at its original size The subtitles may remain visible 4 3 Display a 16 9 picture at a 4 3 size the picture is shortened horizontally Sidebars appear on both edges of the screen Wide screen Display a 16 9 picture that is stretched horizontally and vertically Unscaled Display a 16 9 picture at its original size For 4 3 video signal Automatic Super zoom 4 3
3. CITA 1 Category List of category menus Recommendations List of recommendation stations Favorites List of your favorite video stations Genre List of stations categorized by genre Most Popular Podcasts List of popular podcasts 2 Station list Displays station list 3 Operation guide Displays color buttons red green yellow blue guide 1 Press NET TV on the remote control and then use 4 w 4 b to select vTuner Video 2 Use lt gt to select the desired category then press OK 3 In the player screen use 4 w 4 b to select the desired station or genre then press OK Guide to the playback screen NEWS NEWS 11 24 10 6 NEWS NEWS 11 23 10 NEWS NEWS 11 22 10 NEWS NEWS 11 21 1 Station icon 2 Station name 3 Station information 4 Episode list 5 Color buttons red green yellow blue guide 6 Current episode information 4 Inthe playback screen use 4 w to select the desired episode then press OK After loading playback of the selected episode will start e Tostop playback press W e Episode list can be displayed 5 episodes at one time To s
4. Movie expand 14 9 sere n Movie expand 16 9 Automatic Other than DTV and HDMI connected devices enlarges the picture to best fit the screen DTV and HDMI connected devices display the picture at its original size The subtitles may remain visible Super zoom Display a 4 3 picture at a 16 9 size the picture is stretched horizontally and vertically and its left and right edges are enlarged This crops out the top and bottom of the picture 4 3 Display a 4 3 picture at its original size Sidebars appear on both edges of the screen Movie expand 14 9 Display a 4 3 picture at a 14 9 size the picture is stretched horizontally and vertically This crops out the top and bottom of the picture Sidebars appear on both edges of the screen Movie expand 16 9 Display a 4 3 picture at a 16 9 size the picture is stretched horizontally and vertically This crops out the top and bottom of the picture Wide screen Display a picture that is stretched out of proportion to fill the screen For PC input signal 4 3 Wide screen Unscaled 43 Display a proportionately stretched picture Sidebars appear on both edges of the screen Wide screen Display a picture that is stretched out of proportion to fill the screen Unscaled Displa
5. Ifyou select Wireless use a w to select a setting and then press OK Select this setting if your router has a Wi Fi Protected Setup WPS button Start scanning for wireless networks on the TV after pressing the WPS button on your router If connection test fails refer to the router s manual for more details Easy connect Search for wireless networks automatically and select the wireless network name SSID from the list see Wireless network setting Auto on page 30 Scan If you select Wired use a v to select a setting and then press OK Connection test will start automatically See Connection test on page 30 Press a v to select the desired mode for energy saving then press OK Home is recommended for normal home use In the Retail Store mode all settings are fixed Retail store Select Retail store if you want backlight to be brighter Select Home to reduce power consumption You must set Home Otherwise personalized picture and sound settings will not be memorized after the unit goes to standby mode Select Retail store the unit will be set up with predefined setting for retail displays Select Home the unit will be set to maximize energy efficiency Picture and sound settings can be adjusted and saved as per your personal preferences Press 4 to select Start then press OK to begin Settings assistant
6. 5 SOURCE Selects connected devices 6 VOLUME Increases or decreases volume Remote control AUTO OPTIONS d GD e mne rav PHILIPS TELEVISION SIS E Sr O 5 standby On Switches the TV on or puts it in standby mode The TV is not powered off completely unless it is physically unplugged FAV Displays a list of all channels marked as favorite Includes subchannels SLEEP Sets a delay after which the TV switches to standby Color buttons red green yellow blue Selects tasks or options SOURCE Selects connected devices NET TV Displays the Net TV menu OK Activates a selection or accesses the menu AY 4 navigation buttons Navigates through the menus INFO Displays information about the TV channel or accessory device The quality and accuracy of the information depends on the broadcaster You might see a difference in broadcast time if the broadcast is from a different time zon
7. Lf Ii OUT Da cable m 000 y lt Y set top box RF IN ar Do not place your recorder too close to the screen because some recorders can be susceptible to signals E Only the left loudspeaker reproduces sound for mono equipment Use a mono to stereo adapter not supplied for sound reproduction via all internal loudspeakers When you connect cables match the cable colors to the connectors on the TV Connecting a set top box via a composite connector and analog audio audio UR video i I cable an OUT Uist J E RF IN 3r set top box E Only the left loudspeaker reproduces sound for mono equipment Use a mono to stereo adapter not supplied for sound reproduction via all internal loudspeakers When you connect cables match the cable colors to the connectors on the TV Connecting the TV to the internet using an Ethernet cable hub or broadband router Ethernet cable internet amp telecommunications equipment modem etc Ethernet cable B Note Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment After connecting an Ethernet cable set up necessary network settings For the network setup refer to Network on page 30 Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
8. Specifications are subject to change without notice Trademarks are the P amp F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained P amp F USA warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied P amp F USA cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to P amp F USA will be adapted and published on the P amp F USA support website as soon as possible Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty o components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Service Centers and official repair shops Failure to do so shall void any warranty stated
9. Wide Screen Unscaled PC input via VGA HDMI Photo slide show Yes jpeg files only MP3 playback Yes mp3 files only Video playback Yes MPEG1 2 Connections Component video 1 input with audio L R Supporting video signals 480i p 720p 1080 60Hz 1080p 24 30 60Hz Composite video input 1 with audio L R HDMI 4 Supporting video signals 480i p 720p 10801 60Hz 1080p 24 30 60Hz PC input up to 1920x1080 60Hz HDMI ARC HDMI 1 only 3 5mm stereo miniplug shared use for HDMI 4 and PC input PC input up to 1920x1080 60Hz Digita audio output Supporting Dolby Digital and PCM USB Wireless LAN Supporting wireless standards IEEE 802 11 b g n 2 4GHz Ethernet port 1 44 EN 12 Warranty LIMITED WARRANTY ONE 1 YEAR WARRANTY COVERAGE This warranty obligation is limited to the terms as set forth below WHO IS COVERED This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period At its option the
10. gt Network gt Network setting assistant gt Wired 2 Use a v to select a setting and then press OK Connection test will start automatically See Connection test on page 30 3 Press MENU to exit 30 EN Network selection 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Installation gt Network gt Manual network settings gt Network selection 2 Use a v to select a setting and then press OK Description Select to use a wireless LAN to connect to Wireless the internet by wireless connection Select to use an Ethernet cable to connect to ned the internet by wired connection 3 Press MENU to exit Connection test Perform the following steps to test your internet connection after you have connected an Ethernet cable or entered network settings such as IP address DNS settings etc manually 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Installation gt Network gt Connection test Connection test will start automatically and the test result will appear right after the connection test finishes Testing The test is in progress e Pass Connection test is successfully completed Fail Connection test failed Check the connection settings Press OK to go to the list of network status confirmation screen 2 Press MENU to exit Ifthe c
11. 2 Set up the necessary network connection settings See Network on page 30 Logging in to Net TV 1 Press NET TV on the remote control NetTV screen will appear For the first time only Philips Terms of Use Internet Enabled product screen will appear After confirming the content use lt gt to select Agree then press OK Guide to Net TV menu screen Net TV start screen Video Musie Same News Lifestyle 4 3 1 Sorting items Categorizes genre of each services 2 Network Service icons Displays service icons 3 Country 4 Terms of Use Selects what country you live Displays a clause of net service Information on Network Services For detailed information on 3rd party Internet services please visit the service providers website Netflix http www netflix com HowltWorks Film Fresh http filmfresh roxionow com Blockbuster http www blockbuster com VUDU http www vudu com product_overview html Cloud TV http www activevideo com Enjoying vTuner With this unit you can enjoy video and internet radio with v Tuner via the internet In order to watching video and listen to internet radio you must connect this unit to the internet Video playback After you set up the network connection follow the following procedure to watch the video Guide to the player screen e g Recommendations 4
12. 3 a license of Recipi ent s choosing containing terms different from this License provided that the license terms include this Section 3 and Sections 4 6 7 10 12 and 13 which terms may not be modified or superseded by any other terms of such license If Recipient elects to use any license other than this License Recipient must make it absolutely clear that any of its terms which differ from this License are offered by Recipient alone and not by SGI lt is emphasized that this License is a limited license and regardless of the license form employed by Recipient in accordance with this Section 3 2 Recipient may relicense only such rights in Original Code and Modifications by SGI as it has actually been granted by SGI in this License Indemnity Recipient hereby agrees to indemnify SGI for any liability incurred by SGI as a result of any such alternative license terms Recipient offers Termination This License and the rights granted hereunder will terminate automatically if Recipient breaches any term herein and fails to cure such breach within 30 days thereof Any sublicense to the Covered Code that is properly granted shall survive any termination of this License absent termination by the terms of such sublicense Provisions that by their nature must remain in effect beyond the termination of this License shall survive No Trademark Or Other Rights This License does not grant any rights to i any software apart from the Covered Co
13. 7 p 5 8 y On with Adjusts backlight for the best picture quality by Light dynamically adjusting the backlight intensity in 3 5 Active control Sensor accordance with lighting condition in the room Changing picture settings Eme od Adjusts backlight for best picture quality based add on the incoming video signal i Automatic Super zoom 4 3 Movie j Pi expand 14 9 Refer to Summary of picture formats on icture format T TA 1 Press MENU on the remote control Movie page 23 2 Use a W 4 gt to select Setup gt Picture expand 16 9 Wide Start now Ed Unscaled HITIT L IHN PC Turns off image enhancement features which makes the TV to act purely as a monitor Mode selection erma HDTV Enables image enhancement features to Color improve picture quality O The horizontal vertical position clock and Tint tra Auto adjustment phase of the PC screen are automatically oo adjusted Sharpness A P a gt Clock Setting to stabilize the PC screen Color temperature Cool Phase Setting to improve the clarity of the PC screen Dynamic contrast off Horizontal shift ene positon gtthe picture f F Adjusts the vertical position of the picture for 3 Use a w 4 p to select one of the picture settings and press OK Vertical shift elem i E to enter the setting 4 Adjust the picture quality 5 Press MENU to exit The following picture settings can be configured Depending on Note the format of the picture source some picture set
14. POSSIBILITY OF SUCH DAMAGE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR The licence and distribution terms for any publically available version or derivative of this OTHER DEALINGS IN THE SOFTWARE code cannot be changed ie this code cannot simply be copied and put under another distribution licence including the GNU Public Licence Free Type Portions of this software are copyright c 2006 2007 2008 2009 The Free Type Project www JSON_Parser freetype org All rights reserved Copyright c 2005 JSON org Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions LibiPEG This software is based in part on the work of the Independent JPEG Group he above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software Open SSL The Software shall be used for Good not Evil LICENSE ISSUES de M T HE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS arra OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY The OpenSSL to
15. damaging the unit If your telecommunications equipment modem etc does not have broadband router functions connect a broadband router If your telecommunications equipment modem etc has broadband router functions but there is no vacant port use a hub For a broadband router use a router which supports 10BASE T 100BASE TX Do not connect your PC directly to the Ethernet port of this unit Connecting the TV to the internet using a wireless LAN Wireless LAN Access Point AP A E e g wireless router 1 WAN internet network equipment modem etc After you made the wireless connection set up necessary network settings For the network setup refer to Network on page 30 Use a Wireless LAN Access Point AP e g wireless router which supports IEEE 802 11 b g n n is recommended for stable operation of the wireless network This unit does not support Ad hoc made Other radio devices or obstacles may cause interference to the wireless network connection Connecting a digital home theater amplifier using a digital audio coaxial cable digital home theater amplifier E Due to Copyright restrictions the broadcaster may choose to mute PCM audio over Digital Audio Output for certain channels shows or segments during the broadcast EN 41 English Connecting a PC
16. plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or d
17. CC 3 or T 1 and T 3 are not available There are 3 display modes according to programs Paint on mode Displays input characters on the TV screen immediately Pop on mode Once characters are stored in memory they are displayed all at once Roll up mode Displays the characters continuously by scrolling max 4 lines Sleeptimer You can always put your TV in standby mode earlier or reset the sleeptimer during the countdown 1 Press SLEEP to set the sleeptimen Also you can set the sleeptimer in Features menu 2 Use SLEEP or lt gt repeatedly to change the amount of time in increments of 30 minutes up to 180 minutes e Each press of SLEEP or b will increase the time by 5 minutes Each press of will decrease the time by 5 minutes After setup the sleep timer display can be called up for checking by pressing SLEEP 26 EN Tip To Cancel the Sleep Timer Press SLEEP or lt gt repeatedly until 0 is displayed on the TV screen Child and rating locks You can prevent your children from watching certain programs or certain channels by locking the TV controls and by using ratings Setting your PIN 1 Press MENU on the remote control and then use 4 w 4 b to select Setup gt Features gt Child lock 2 Entera 4 digit PIN on the Number buttons of the remote control Ifyou have not set up your PIN enter 0 0 0 0 Changing your PIN 1 Press MENU on the rem
18. If you connect a PC with aVGA connector at the back i pa E VGA 5 If you connect a PC with a HDMI DVI connector PC If you connect a PC with an HDMI or Display Port HDMI Display Port conversion cable connector 42 EN Add devices After connecting devices assign the device attached to each connector This allows you to easily identify devices connected to your TV Press MENU on the remote control and then use amp w lt b to select Add new devices Use lt gt to select Start then press OK Use a v to select the connector your device is connected to and 1 2 3 Use a v to select a device and press OK 4 press OK 5 If there is video and audio output press OK Repeat the procedure until all devices are correctly assigned to connectors Remove devices Ifa device is no longer connected to the TV remove it from the home 1 Press MENU on the remote control 2 Use a w 4 to select a device to remove 3 Press OPTIONS 4 Use a v to select Remove device then press OK 5 Use lt gt to select OK then press OK HDMI DisplayPort Audio Specifics To hear your PC audio from the TV speakers make sure the default playback device is the HDMI Audio Device and not your computer speakers soundcard The HDMI Audi
19. License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following he terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNE
20. NEGLIGENCE OR OTHERWISE rr ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE pe Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved POSSIBILITY OF SUCH DAMAGE This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the MIT RCA RSA Ihash DES etc code not just the SSL code The SSL documentation included with Pe REE RSE cl eel CS Ae Eee this distribution is covered by the same copyright terms except that the holder is Tim Hudson expat tih eryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed f this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form mus
21. Patents to make have made use sell offer for sale import and or otherwise transfer the Original Code and or any Modifications provided by SGI No License For Hardware implementations The licenses granted in Section 2 1 and 2 2 are not applicable to implementation in Hardware of the algorithms embodied in the Original Code or any Modifications provided by SGI Redistributions Retention of Notice Copy of License The Notice set forth in Exhibit A below must be conspicuously retained or included in any and all redistributions of Covered Code For distributions of the Covered Code in source code form the Notice must appear in every file that can include a text comments field in executable form the Notice and a copy of this License must appear in related documentation or collateral where the Recipient s rights relating to Covered Code are described Any Additional Notice Provisions which actually appears in the Original Code must also be retained or included in any and all redistributions of Covered Code Alternative License Provided that Recipient is in compliance with the terms of this License Recipient may so long as without derogation of any of SGI s rights in and to the Original Code distribute the source code and or executable version s of Covered Code under 1 this License 2 a license identical to this License but for only such changes as are necessary in order to clarify Recipient s role as licensor of Modifications and or
22. Select Picture A or Picture B by pressing that is the most pleasing to you then press OK You see 5 different pictures to be completed Which side of the picture do you prefer cancel Picture 8 Press 4 to select Store then press OK Store your preferences Cancel Press OK to finish Settings assistant The TV has learned your preferences Press 4 b to select Finish then press OK Finish the Setup Ifyou are not receiving a signal from your cable service contact the CATV provider Ifyou press during autoprogram an installation will be canceled except the language selection The initial autoprogram function can be executed for either Antenna or Cable only once When you change the connection Antenna Cable set autoprogram again Refer to page 35 EN 11 English 5 Use your TV This section helps you perform basic TV operations Switching on your TV and putting it in standby mode To switch on Press 1 POWER at the side of the TV or press standby On on the remote control To switch to standby Press 1 POWER at the side of the TV or press standby On on the remote control again Note Energy consumption contributes to air and water pollution When the AC power cord is plugged in your TV consumes energy Your TV has very low standby power consumption 12 EN Switching cha
23. a story 18 Programming intended for viewers ages 18 and over ay contain strong violence language and sexual activity Summary of Canada French ratings lock Rating Description All All items in the ratings list are locked NR ot rated G ovies with a mild content suitable for all ages PG ovies for which parental guidance is recommended They may contain a few racy or violent scenes or maybe some bad language PG 13 ovies for which parental guidance may be recommended if under age 13 R Restricted The movies usually contain offensive sex or bad language and may be unsuitable for children under he age of 17 Parental guidance or permission needed NC 17 Even with parental permission forbidden under age 17 ore offensive sex violence or bad language x ovies which generally focus on sex violence and or bad language Also known as pornography 28 EN Rating Description All All items in the ratings list are locked E Exempt program G Appropriate for all ages with little or no violence and little to no sexual content 8ans Appropriate for children 8 and up which may contain little violence some foul language and or little to no sexual content 13ans Appropriate for children 13 and up with moderate violence language and some sexual situations Persons under 13 should be accompanied by an adult 16ans Appropriate for children 16 and u
24. also fall under Section 6 whether or not they are linked directly with the Library itself As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License Ifthe work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not
25. an extension cord between the USB flash memory and the unit Always insert the USB flash memory to this unit directly Different types of connectors may be used to connect a device to your TV depending on availability and your needs Selecting your connection quality HDMI Highest quality Supports high definition signals and gives highest picture and sound quality Video and audio signals are combined in one cable You must use HDMI for full high definition video and to enable Philips EasyLink Philips HDMI supports HDCP High bandwidth Digital Contents Protection HDCP is a form of Digital Rights Management that protects high definition content in DVD or Blu ray Discs The HDMIARC connector on the TV features HDMI ARC functionality This allows output of TV audio to an HDMI ARC compliant device Component Y Pb Pr High quality Component video cable red green blue and audio L R cable red white Supports high definition signals but gives lower picture quality than HDMI Component cables combine a red green blue video cable with a red white audio L R cable Match the cable colors when you connect to the TV Composite Basic quality Composite video audio cable yellow red white For analog connections Composite cables usually combine a yellow video cable with a red white audio L R cable Match the audio cable colors when you connect to the TV Connecting your devices This sectio
26. be avoided FCC Radiation Exposure Statement This equipment is compliance with SAR for general population uncontrolled exposure limits in ANSI IEEE C95 1 1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C This equipment should be installed and operated with minimum distance 2 5cm between the radiator amp your body This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Copyright All other registered and unregistered trademarks are the property of their respective owners SiS TruSurround HD SRS TruSurround HD creates an immersive feature rich surround sound experience from two speakers complete with rich bass high frequency detail and clear dialog SISO is a trademark of SRS Labs Inc TruSurround HD technology is TruSurround ND incorporated under license from SRS Labs Inc HDMI the HDMI Logo and High Definition Hamr Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries De DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol DIGITAL PLUS are trademarks of Dolby La
27. by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all de
28. episode list or the episode is being played back 3 Press OK 4 Press MENU to exit Remove from Favorites 1 Follow step 1 in Video playback on page 17 2 Use lt gt to select Favorites in the category tab then press OK 3 Use a W lt gt to select the station you want to remove from Favorites then press Color buttons yellow Confirmation message will appear 4 Use lt gt to select Yes then press OK The selected station is removed from Favorites 5 Press MENU to exit Internet radio playback After you set up the network connection follow the following procedure to listen to internet radio 1 Press NET TV on the remote control and then use 4 w 4 to select vTuner Radio Category list will appear 2 Inthe category list use a w to select the desired category then press OK Station folder list of selected category will appear For Location and Genre use a v to select the desired location or genre after selecting the category then press OK Recently Played List of stations which are recently played Favorites List of your favorite radio stations My Added Stations List of stations which are added on vTuner website This category will appear only after you add stations on vluner website Location List of stations categorized by location Genre List of stations categorized by genre 18 E New Stations List of new stations Mo
29. file e Press CH to play the current file at the beginning L gt Press CH twice within 5 seconds to play the previous file Press OPTIONS to display the optional menu then use a to select the desired item TV speakers The sound will not be output from the unit s Off speakers On The sound will be output from the unit s speakers Speaker You can control audio output from your EasyLink connected EasyLink Compliant Devices with VOL by using this unit s remote control e The resume information will be lf you play another file while the previously viewed file is being resumed the resume information of the previously viewed file will be deleted ept even when the unit is turned off Net TV Net TV offers Internet services for your TV Use the TV remote control to browse the Net TV Internet pages You can play movies listen to music and much more all from your TV screen Because Net TV is an online system it can be modified over time to better serve its purpose Some Net TV services can be added changed or stopped after some time You cannot download and save files or install plug ins Before Logging in to Net TV Follow the procedure below before logging in to Net TV T Connect this unit to the internet See Connecting the TV to the internet using an Ethernet cable or Connecting the TV to the internet using a wireless LAN on page 41
30. goes to standby mode Network Set up network connection settings in order to use Net TV or network update function Network setting assistant Before you proceed to Connection test or other settings in Network section set this selection to suit your preference Wireless setting Select to use a wireless LAN to connect to the internet by wireless connection 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Installation gt Network gt Network setting assistant gt Wireless 2 Use a v to selecta setting and then press OK Select this setting if your router has a Wi Fi Protected Setup WPS button Start scanning for wireless networks on the TV after pressing the WPS button on your router If connection test fails refer to the router s manual for more details Easy connect Search for wireless networks automatically and select the wireless network name SSID from the list see Wireless network setting Auto on page 30 Set up the connection to the Wireless LA Access Point AP e g wireless router manually by entering the wireless network name SSID see Wireless network setting Manually enter your SSIDYon page 31 Manual entry 3 Press MENU to exit Wired setting Select to use an Ethernet cable to connect to the internet by wired connection 1 Press MENU on the remote control and then use a W lt gt to select Setup gt Installation
31. language 35 Autoprogram 39 Weak channel installation 35 Installation mode 35 Uninstall channels 35 Return your settings to default values 35 8 Update your TV software 36 Checking your current software version 36 Preparing for the software update by USB 36 Updating software 36 9 Connect devices 38 Connection overview 38 Selecting your connection quality 39 Connecting your devices 39 Add devices 42 Remove devices 42 10 Troubleshooting 43 Downloading an electronic copy 43 Contact us 43 11 Specifications 44 12 Warranty 45 13 Index 46 License end of book Note Individual menu items in the TV are dynamic and will change based on type of input media options enabled disabled and some other factors such as the version of the software installed on the TV EN fi English Return your Product Registration Card or register online at www philips com support today to get the very most from your purchase Registering your model with Philibs makes you eligible for all of the valuable benefits listed below so don t miss out Complete and return your Product Registration Card at once or register online at www philips com support to ensure Product Safety Notification By registering your product you ll receive notification directly from the manufacturer in the rare case of Additional Benefits Registering your product guarantees that you ll receive all of the privileges to which you re a product
32. of the menus for movie ratings lock In the USA select Movie ratings lock In Canada select Canada English ratings lock or Canada French ratings lock The following screen shows the ratings in Movie ratings lock aption se gs O afte C Al 4 Use a v and then press OK repeatedly to switch between locked and not locked Each rating has a box graphic in front of it to indicate whether it is locked A box with x indicates that all tems in the rating are locked An empty box indicates that no items in the rating are not locked When you select AII all items in the ratings list are locked 5 Press MENU to exit Summary of Movie ratings lock Summary of Canada English ratings lock Rating Description All All items in the ratings list are locked E Exempt program al Programming suitable for children under the age of 8 years No profanity or sexual content of any level allowed Minimal comedic violence C8 Suitable for children ages 8 and over Low intensity violence and fantasy horror allowed G ovies with a mild content suitable for all ages PG ovies for which parental guidance is recommended They may contain a few racy or violent scenes or maybe some bad language 14 Programming intended for children ages 14 and over ay contain intense scenes of violence strong profanity and depictions of sexual activity within the context of
33. or situations and some strong language TV 14 Programs contain elements that may not be suitable for children under 14 years of age Language These programs include one or more of the Sex following intense violence intense sexual san Bor Viol situations suggestive dialog and strong language lyiolen e TV MA Programs are designed to be viewed by adults Language and may be unsuitable for children under Sex the age of 17 These programs may contain graphical violence explicit sexual activity and or crude or indecent language The Chip can block non rated programs as per CEA 608 E sec L3 Ifthe option to block None NR E or E programs is used in TV ratings lock Movie ratings lock Canada English ratings lock or Canada French ratings lock accordingly unusual results may occur and the unit may not receive emergency bulletins or other types of programming Emergency Bulletins Such as EAS messages weather warnings and others Locally originated programming News Political Public Service Announcements Religious Sports Weather Violence EN 27 English Using the movie ratings lock You can control viewing of movies based on their MPAA Motion Picture Association of merica rating 1 Press MENU on the remote control and then use a w 4 to select Setup gt Features gt Child lock 2 Enter your PIN See Setting your PIN on page 26 3 Select one
34. purpose of the polarized or grounding type plug 17 18 19 20 21 22 C The appliance has been exposed to rain or D The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design Do not compromise these design standards by applying excessive pull force to the front or top of the cabinet which could ultimately overtum the product Also do not endanger yourself or children by placing electronic equipment toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mats and supporting structure grounding of the lead in wire to an antenna discharge unit siz
35. recall or safety defect Know these sa fety symbols RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL entitled including special money saving offers A This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond PHILIPS rld Wide Web Site at http www philips com support CHILD SAFETY It Makes A Difference How and Where You Use Your Flat Panel Display THE ISSUE The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases However flat panel displays are not always suppor
36. screen and frame with a soft cloth Never use substances such as alcohol chemicals or household cleaners on the TV screen Risk of damage to the TV screen Never touch push rub or strike the screen with any object To avoid deformations and color fading wipe off water drops as soon as possible Environmental care OY ae The packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging For product recycling information please visit www recycle philips com End of life directives E This LED TV contains a lamp with Mercury please dispose of according to all local state and federal laws Philips pays a lot of attention to produce environment friendly products in green focal areas Your new TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old TV according to local regulations Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations Regulatory notices oN Warning To reduce the risk of fire or electric shock
37. speakers You can control audio output from your connected EasyLink Compliant Devices with VOL by using this unit s remote control Speakers EasyLink e TV Speakers will be displayed only when Master EasyLink is set to On See EasyLink on page 29 34 EN Watch your Video on a USB storage device 1 Inthe USB content browser use a to select Video 2 Press a v to select a file or a folder on the USB storage device D o ____ Video avi 3 Press OK or PI to play the selected files e Press OK or bil to pause press OK or gt H again to resume Press bb to fast forward search Press 4e to fast backward search e Press W to stop playback tL Press gt I to resume from the point at which playback was stopped Press OK to play from the beginning of the file at which playback was stopped e Press OPTIONS to display the optional menu then use 4 w to select the desired item Setting items Description 7 Not TE a available Displays if no subtitle is available Subtitle Subtitle Off Set subtitle to off Select the desired subtitle if the Video file Subtitle 1 8 5 contains them Not The unit displays if no audio language is available available Audio language A i Select the desired audio language if the Video Audio 1 8 ES file contains them Of The sound will not be output from the unit s speakers The sound will be output from the u
38. the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Ine 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show e should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c i they could even be mouse clicks or menu items whatever suits your
39. then press OK 2 Select enable or disable RC key forwarding if this Use a v to select On HDMI1 to HDMI4 unit connected through HDMI to HDMI to your EasyLink devices Note MERC HDMI ARC e Select Off to disable this function Philips does not guarantee 100 interoperability with all HDMI CEC devices Use a vw to select the desired option then press OK The EasyLink compliant device must be switched on and selected as the source Disable HDMI ARC You can output TV audio through the HDMI cable solely provided both the TV and device are HDMI ARC compliant Master EasyLink must be activated in the Preferences menu to make the TV Speakers menu available in the Sound menu Device List This function lets you see the product name of connected devices Use a y to select the desired HDMI device listed on the TV screen then press OK 4 Press MENU to exit EN 29 English Set your location to home You can set the location of your TV to Home or Retail store Choosing Home gives you full flexibility to change predefined settings for picture and sound 1 Press MENU on the remote control and then use a w 4 p to select Setup gt Installation gt Preferences gt Location 2 Select Home and then press OK to confirm your choice 3 Press MENU to exit You must set Home Otherwise personalized picture and sound settings will not be memorized after the unit
40. this apparatus should not be exposed to rain or moisture Objects filled with liquids such as vases should not be placed on this apparatus t Caution To prevent electric shock match the wide blade of the plug to the wide slot fully inserted Do not place the unit on the furniture that is capable of being titted by a child and an adult leaning pulling standing or climbing on it A falling unit can cause serious injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 4 inches 10cm or more around this apparatus EN 5 English 3 Your TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com support Side controls and indicators 4 Ambient light sensor Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when Active control is set to On with Light Sensor Please ensure the room lighting is stable and the light sensor is not blocked 2 Standby indicator Remote control sensor 3 O POWER Switches the TV on or puts it in standby mode The TV is not powered off completely unless it is physically unplugged 4 CHANNEL Switches to the next or previous channel
41. to exit Pandora operations With this unit You can instantly listen to personalized radio stations streamed over the Internet from Pandora To learn more about Pandora please visit www pandora com Activating Pandora In order to listen to Internet radio streamed from Pandora via the Internet you must create a Pandora account and activate this unit 1 Press NET TV on the remote control and then use 4 w 4 p to select PANDORA gt Create new account Use a v to select No am new to Pandora then press OK Note the activation code and website address displayed on the TV screen On your PC visit the website address noted at step 3 Follow directions on the website to create your account oO Un e WW N On this unit select Continue and press OK to complete activation Adding Pandora User Accounts You can add multiple Pandora user accounts on this unit Follow steps 1 to 2 in Activating Pandora on page 19 Use a v to select Yes have a Pandora account then press OK Enter your e mail address then press OK while OK is selected Enter a password then press OK while OK is selected UN Ww N ea Use a v to select Sign In then press OK Your account is added to the user list and player screen appears on the TV screen Note Pandora is available only in the United States You can add up to 5 accounts After creating 5 accounts Create new account is not displayed Cr
42. you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the library s name and a brief idea of what it does gt Copyright C lt year gt lt name of author gt his library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a copy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you
43. Code or out of any representation or warranty Sers The Covered Code is a commercial computer so tware as suc commercial item consisting of terms are defined in title 48 of the Code of Federal Regulations and all U S Government End Users acquire only the rights set forth in this License and are subject to the terms of this License Miscellaneous This License represents he complete agreement concerning the its subject matter If any provision of this License is held to be unenforceable such provision shall be reformed so as to achieve as nearly as original provision and the remainder of possible the same legal and economic effect as the this License will remain in effect This License shall be governed by and construed in accordance with the laws of the United States and the State of California as applied to agreements California between California residents Any litigation relating to entered into and to be performed entirely within his License shall be subject to the exclusive jurisdiction of the Federal Courts of the Northern District of California on absent subject matter jurisdiction in such courts the courts of the State of California with venue lying exclusively in Santa Clara County California with the losing party responsible for costs including without limitation court costs and reasonable attorneys fees and expenses The application of the United of Goods is expressly exc
44. ERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE libcurl COPYRIGHT AND PERMISSIO NOTICE Copyright c 1996 2009 Daniel Stenberg lt daniel haxxse gt All rights reserved Permission to use copy modify and distribute this software for any purpose with or without fee is hereby granted provided that the above copyright notice and this permission notice appear in all copies THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE ORTHE USE OR OTHER DEALINGS INTHE SOFTWARE Except as contained in this notice the name of a copyright holder shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior written authorization of the copyright holder Open GL Notice License Applicability Except to the extent portions of this file are made subject to an alternative license as permitted in the SGI Free Software License B Version 1 0 the License the contents O h D C TI el A ju 1 this
45. OK to You can use the remote control from the connected device to adjust select the setting the volume 3 Adjust the following items Remote control RC key forwarding Master EasyLink RC key forwarding allows you to control EasyLink compliant devices Set the EasyLink On or Off iing your TV emisora The following additional settings will disappear when you set to Off Use a vw to select the desired option then press OK Audio Return Channel ARC Disable all EasyLink HDMI ARC allows you to use Philips EasyLink to output TV audio Select if you have connected an external device that directly to a connected audio device without the need for an additional E is compatible with the EasyLink function digital audio cable HDMI ARC supports more digital audio formats than S PDIF Be sure that the device is HDMI CEC and ARC compliant and Auto TV On that the TV is connected to the device using an HDMI cable attached to HDMI ARC connectors Use a v to select the desired option then press OK This unit remains in standby mode even if you turn on your connected EasyLink device This unit turns on automatically when you turn on On A your connected EasyLink device 1 Press MENU on the remote control and then use 4 w 4 to RC Key forwarding select Setup gt Installation gt Preferences gt EasyLink gt Master EasyLink Activate Master EasyLink Use a v to select the desired option
46. PC using PC input jack An audio cable is not connected Connect an audio cable to the PC HDMI 4 AUDIO IN on the TV Press SOURCE on the remote control and select the PC source No picture or sound is detected from the PC using HDMI 4 input jack TV does not respond to the remote control The picture is distorted stretched out or has black bars on the side or top The picture is mostly red and green or the picture misses red when connected to an accessory device via component cables No picture or sound No sound on the TV loudspeaker An incorrect HDMI input jack is connected or an audio cable is not connected Connect a HDMI DVI cable to the HDMI 4 input jack on the TV Connect an audio cable to the PC HDMI 4 AUDIO IN on the TV Press SOURCE on the remote control and select the HDMI 4 source Batteries are installed incorrectly or low battery power Ensure that you are using the TV remote control Ensure that the batteries are inserted correctly and do not need to be replaced Remove the AC power cord from the power socket outlet wait 60 seconds and reconnect the AC power cord Broadcast video format Press FORMAT on the remote control to select the best picture format For some accessory devices the picture format must be set in the accessory device Insecure incorrect connection Ensure all the connections are made according to the color code n the component cables all the way into the YP
47. PIN to start a slideshow of the files Press OK or bill to pause the slide show L gt The Hf icon appears Press 44 or bb to move between images Press BACK or m to stop the slide show e Press OPTIONS to display the optional menu then use a to select the desired item Slide time 1 Transitions 1 You can set Slide time and Transitions when images are in Slide show 2 You can set Rotate and Zoom when Slide show is in pause mode EN 33 English Listen to music on a USB storage device 1 Inthe USB content browser use A w to select Music 2 Press a v to select a file or a folder on the USB storage device Picture Track1 mp3 l Track2 mp3 Title Artist Album Duration 00 03 41 Year 3 Press OK or PI to play the selected files Press OK or HH to pause press OK or gt I again to resume Press b to skip up the next file Press 4d to skip down the previous file Press M to stop playback Press OPTIONS to display the optional menu then use a to select the desired item Off Sets repeat playback to off Repeat O Sets repeat playback for all MP3 files in the n current folder Sets shuffle playback to off Shuffle O Sets shuffle playback for all MP3 files in the n current folder The sound will not be output from the unit s speakers The sound will be output from the unit s On TV speakers
48. Philips EasyLink Other brands might not work with Philips EasyLink Folder or files stored on DLNA home media server are not displayed in the file list or cannot be played back Check the setting on your home media server Refer to the user manual of the home media server Check the network connection and settings Cannot use Netflix feature Netflix is available only in the United States Check if the network connection is properly made Visit www netflix com Philips on your PC and become a Netflix rember Cannot add movies or TV episodes to the Instant Queue Visit www netflix com on your PC Cannot use VUDU feature VUDU is available only in the United States Check if the network connection is properly made Cannot rent or buy movies TV episodes on VUDU You need to activate the VUDU account Refer to page 17 Log into your account at http my vudu com and check your payment information The picture quality of streaming movie Netflix Film Fresh Blockbuster or VUDU is poor Check the speed of your internet connection You need speeds of at least 8 Mbps to this player for high quality uninterrupted playback Streaming movie Netflix Film Fresh Blockbuster orVUDU often stops or starts buffering during playback Contact your internet service provider to troubleshoot your internet connection for speed and line quality Consistent line quality and speed are very import
49. Press MENU to exit ae Setting the time manually 1 Press MENU on the remote control and then use a w 4 b to select Setup gt Installation gt Clock gt Auto clock model Select Manual and then press OK to confirm your choice Use a y to select Time and then press OK to set the time Use the format HH MM Select AM PM for morning or afternoon Press BACK to confirm your choice Use a w and then press OK to enter the menu for Day Use a y to select the day Press OK to confirm your choice Press MENU to exit ONDUA Why Closed caption Closed captioning is an assistive technology that allows persons with hearing disabilities to access television programming Closed captioning displays the audio portion of programming as text superimposed over the video Note Closed captioning service may not be controlled by this unit s menu options if you are watching television through an external cable or satellite set top box In which case you will need to use the menu options on the external set top box to control Closed Captioning The captions do not always use correct spelling and grammar Not all TV programs and product commercials include closed caption information Refer to your area TV program listings for the TV channels and times of closed caption shows The captioned programs are usually noted in the TV listings with service marks such as CC Display captions 1 Pre
50. Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 10 NO WARRANTY M You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange on c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains
51. Register your product and get support at philips com support 55PFL5706 46PFL5706 40PFL5706 EN For further assistance call the customer support service in your country E To obtain assistance in the U S A Canada Puerto Rico or the US Virgin Islands contact Philips EN User Manual Customer Care Center at 1 866 309 0841 a To obtain assistance in Mexico contact Philips Customer Care Center at 01 800 504 62 00 FR Manuel d Utilisation Enter below the model and serial numbers located on the back and right side of the TV cabinet FR Pour obtenir de l aide suppl mentaire communiquez avec le centre de service la client le de gt ere pays ES Manual del Usuario Pour obtenir de l aide aux Etats Unis au Canada Puerto Rico ou aux les Vierges am ricaines communiquez avec le centre de service la client le Philips au 1 866 309 0841 Pour obtenir l aide au Mexique entrez en contact avec le centre de soin de client de Philips 01 800 504 62 00 Entrer ci dessous le mod le et le num ro de s rie situ s d rri re droite sur le dos du t l viseur ES Para obtener m s informaci n llame al servicio de soporte al cliente de su pafs Para obtener asistencia en los Estados Unidos en Canad Puerto Rico o en las Islas V rgenes de los Estados Unidos comun quese con Centro de atenci n al cliente de Philips al 1 866 309 0841 R Solo para Mexico CENTRO DE ATENCION A CLIENTES LADA 01 800 504 62 00 Solo Para M xi
52. SS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILLANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUC HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCI DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give
53. Video input for analog devices such as DVD camcorder game console etc To be used with audio input Digital audio output jack Digital audio output to home theaters and other digital audio systems Antenna input jack Signal input from an antenna cable or satellite HDMI 1 input jack First HDMI in connector Digital audio and video input from high definition digital devices such as Blu ray players In addition to normal HDMI functionality outputs TV audio to an HDMI ARC compliant device such as a home theater system HDMI 1 only HDMI 2 input jack Second HDMI in connector HDMI 3 input jack Third HDMI in connector 0 0 16 38 EN 9 USB terminal Data input from USB storage devices only Do not connect any device to this terminal such as digital camera keyboard mouse etc Audio input jack for HDMI 4 and PC 11 HDMI 4 input jack Fourth HDMI in connector 12 PC input jack VGA cable connection for PC Wireless LAN internal Please make sure that there are no obstacles between the TV and the wireless router Other devices and wireless routers using the 2 4GHz spectrum might cause interference and dropouts in connection Refer to the user manual of your wireless router to select the best transmission channel in your usage settings service only For use by service personnel only Caution Disconnect the AC power cord before connecting devices Do not use
54. a number larger than 65535 it will be regarded as 65535 For proxy port the selected ports may be blocked and not be able to use depending on your network environment Ifthe proxy address is entered with blank only proxy server setting will be set to Do Not Use Setting status You can check the status of network settings 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Installation gt Network gt Setting status Network setting list will be displayed MAC address of this unit will be displayed in the list 2 Press MENU to exit Reset network settings You can reset the status of network settings 1 Press MENU on the remote control and then use a W lt gt to select Setup gt Installation gt Network gt Reset network settings gt Start now 2 Press OK to reset the network settings 3 Press MENU to exit Netflix deactivation Displays the deactivation setting for Netflix 1 Press MENU on the remote control and then use A w 4 b to select Setup gt Software gt Netflix deactivation 2 Use a v to select the desired option then press OK Setting items Description Yes Deactivate the connection to Netflix No Activate the connection to Netflix 3 Press MENU to exit 32 EN Netflix ESN Displays the ESN information 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Sof
55. able 9 OUT RF cable If you connect to an antenna Any DTV programs that are broadcast in your area can be received for free through an antenna connection Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area Broadcasters are transitioning from analog to digital TV This means that a given broadcaster can have channels available either in analog or in digital or both analog and digital at the same time The TV produces stereo sound only if a stereo signal is broadcast If you connect to a cable When your TV is connected to the cable socket you might receive free digital and high definition programs depending on your cable provider The channel number for digital and high definition channels includes a dot For example 11 1 46 30 108 201 Contact your cable provider for more information If you connect to a DBS Direct Broadcast Satellite There are two main DBS systems DirecTV and DishNetwork These systems require a separate proprietary set top box to decode signals and send them to the TV The set top box contains a digital TV tuner for receiving off air digital broadcasts Contact your local DBS provider for more information about the connections and the TV channels If you connect to a set top box A cable box or satellite set top box can be connected to the TV through the following connection
56. am when you have locked channels a message appears asking to enter your PIN Enter your PIN in order to complete the installation If you have forgotten your PIN reset it as described in Changing your PIN on page 26 e When autoprogramming is complete the lowest memorized channel will be displayed 3 Follow the on screen instructions to complete the installation Weak channel installation This function lets you add the channels that were not added by the autoprogram due to the receptible condition at the initial setup 1 Press MENU on the remote control and then use a w lt b to select Setup gt Installation gt Channels gt Weak channel installation Use lt gt to select channel input box then use 4 w to select a channel you want to memorize Use lt gt to select Search then press OK is found then press OK 2 3 4 Display will be changed to Store from Search when the channel 5 Press MENU to exit In most cases digital channels are not broadcast on the RF channel on which they appear on your TV To add digital channels you need to know the RF channel on which the digital channel is being broadcast E g If there is a digital channel 9 1 which is being broadcast on RF channel 25 you need to enter 25 while performing a weak channel installation To find out the RF channel on which a particular digital channel is being broadcast please contact your local service provider Installi
57. and the downside display 2 timelines 2 List View Phily and Maggy Right as rain That was a sense of humor Perseverance prevails fllbe there textbook in handi Tinner Lobeno lees an minute Greetings am looking for 2 smali tiny stove in which to heat once a day Propatanga less than 7 minute Would you like the straightforward reasons that people believe in it 4 When you press Color buttons blue in 1 or 2 list view the timeline will increase 5 lines 5 List View Phily and Maggy Right as rain That was a sense of humor es than mirate Would you fike the straightforward reasons that people believe in it Viewing Trends on Twitter Trends show topics trending in your area 1 Follow steps 1 to 2 in Viewing tweets on the TV on page 21 2 Use a v to select Trends then press OK e Press Color buttons green to switch between the Area and Trends e Ifyou display Area the topside will be displayed some countries and the downside will be displayed some cities EN 3 21 English Changing picture and sound settings Description Color Off Sets Color enhancement to off You must set Home in Location Refer to page 30 enhancement On Makes colors more vivid bright colors nos nat lee picture and ia ci will not be OF Ai lio OTT memorized after the unit goes to stan mode
58. ant for internet video playback Even though the speed of the internet connection improves during playback the picture quality of Netflix streaming movie does not improve The picture quality does not change during playback The picture quality differs depending on the speed of internet connection at the time of loading Cannot use Film Fresh Blockbuster feature Film Fresh Blockbuster is available only in the United States Check if the network connection is properly made Visit hetp filmfresh roxionow com Film Fresh or http www blockbuster com Blockbuster on your PC and create an account Cannot use Pandora feature Check if the network connection is properly made Pandora is available only in the United States You must create a Pandora account and activate this unit Refer to Activating Pandora on page 19 The audio of internet radio station interrupted viuner server station or the internet connection is busy The bit rate of the station is high Cannot connect to the network Check if the Ethernet cable connection is properly made Turn on the modem or broadband router Check the network settings Check if the broadband router and or modem is correctly connected Cannot connect to the network while my PC is connected to the network Check the content of your internet service contract to see if your internet Service Provider prevents multiple terminals connecting a
59. appear at the left and the timeline will appear at the bottom of the TV screen User name and password are case sensitive User name will not accept your e mail account Use only your user name registered on the Twitter server Ifyou select Start with no user name the unit logs in as Public In this case you can display Public timeline and Trends only For questions regarding Twitter please visit www twitter com 20 EN Guide to Twitter menu screen Twitter Home Screen Twitter Home Screen consolidates browsing of tweets and some functional menus for Twitter To call up the screen press NET TV on the remote control and then use a w 4 b to select Twitter Single View BPhily and Maggy I ight as rain That was a sense of humor 1 Menu 2 Viewing channel List of functional menus Displays currently watching channel 3 Timeline Displays currently tweeting on Twitter 4 Operation guide Displays Color buttons red green yellow blue guide Full View Single view switches to Full view when you select timeline then press OK Phily and Maggy Right as rain That was a sense of humor Perseverance prevail Ml be there textbook in hand Peters rack star It s not so rich a country as your country Viewing tweets on the TV After logging in to Twitter your TV will download the latest 20 tweets to display 1 Press NET TV on the remote control and then use 4 w 4
60. appears as asterisks on the confirmation screen The wireless LAN supports following specifications Wireless standards IEEE 802 11 b g n Frequency spectrum 2 4GHz Security protocol WEP WPA WPA2 Wireless network setting Manually enter your SSID Set up the connection to the Wireless LAN Access Point AP e g wireless router manually by entering the wireless network name SSID 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Installation gt Network gt Manual network settings gt Wireless network setting gt Manually enter your SSID Wireless LAN Access Point AP e g wireless router Name SSID entry screen will appear Enter the wireless network name SSID using 4 w 4 b then press OK Clear Clear the entered number or word All clear Clear all the entered numbers or words a A Switch between abc ABC and Cancel Shows the cancellation display OK Set the entered number or word 2 Use a y to select the authentication setting of the selected wireless network For a wireless network with authentication setting select the authentication setting according to the security type of the wireless network Fora wireless network without authentication setting select None None Set the authentication setting to None WEP Set the authentication setting to WEP WPA PSK Set the
61. authentication setting to WPA PSK WPA2 PSK Set the authentication setting to WPA2 PSK Ifyou select WEP WPA PSK or WPA2 PSK WEP WPA Key entry screen will appear Enter the WEP WPA key of the selected wireless network using 4 w 4 p then press OK Clear Clear the entered number or word All clear Clear all the entered numbers or words a A Switch between abc ABC and Cancel Shows the cancellation display OK Set the entered number or word Confirmation message will appear Select Yes to complete the settings 3 Press MENU to exit IP configuration In following cases select IP configuration to set each setting as necessary When connection test failed with the setting of Connection test When instructed by your internet service provider to make specific settings in accordance with your network environment 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Installation gt Network gt Manual network settings gt IP configuration 2 Use a v to select a setting and then press OK Setting items f Auto IP setting mode Manual IP address 1 3 Description 7 Sets the IP setting automatically Sets the IP setting manually A set of numbers which are assigned to devices participating in a computer network A mask which is used to determine what 1 3 Subnet rask subnet an IP address belongs to IP address of the netw
62. bPr sockets on the o picture or sound ensure you have selected the correct channel Incomplete channel installation f the TV receives channels via an AV connection set the TV to the correct source input f the TV is connected directly to the wall via a coaxial connection perform the autoprogram again Volume level is set to zero increase the volume Sound is muted press MUTE on the remote control Audio cable is not connected for AV connection ensure that the Audio UR cable is connected as described in Connecting your devices See Connecting your devices on page 39 If you use a component cable ensure that you have not crossed the red audio cable with the red video cable Audio output setting for the accessory device is incorrect For HDMI connections some accessory devices have an HDMI audio output setting that must be turned on for HDMI to HDMI connections Check if Sound gt TV Speakers gt Off is set to On No sound will be output when TV Speakers is set to Off Bad picture quality with a coaxial connection Standard definition channels are not as clear as high definition channels connect the devices via component or HDMI cables Cannot control your TV and connected devices with one remote control Confirm that the connected devices are EasyLink compliant and are connected to your TV via an HDMI cable Not all brands of devices such as Blu ray Disc players use the same system as
63. boratories HIGH DEFINITION MULTIMEDIA INTERFACE DLNA the DLNA Logo and DLNA 3 d na CERTIFIEDO are trademarks service marks or CERTIFIED certification marks of the Digital Living Network Alliance N E T f Netflix and the Netflix logo are trademarks or registered trademarks of Netflix Inc FILM FRESH fae ae Fresh Inc BLOCKBUSTER BLOCKBUSTER name design and related marks are trademarks of Blockbuster Inc VUDU is a trademark of VUDU Inc CloudTV CloudTV by ActiveVideo technology provided under license from Cloud TV ActiveVideo Networks Inc U S and Foreign Patents apply CloudT V and the Cloud TV TM logo are proprietary trademarks of ActiveVideo Networks Inc PANDORA the PANDORA logo and the Pandora trade dress are trademarks or registered trademarks of Pandora Media Inc Used with permission Twitter is a trademark of Twitter Inc v luner is a trademark of Nothing Else Matters Software Ltd O Kensington and Micro Saver are registered a US trademarks of ACCO World corporation I lt with issued registrations and pending o applications in other countries throughout the world Media connect Portions of this software are copyright O The FreeType Project wwwfreetype org The American Academy of Pediatrics discourages television viewing for children younger than two years of age 2 Important Registering your model with Philips ma
64. by an independent laboratory such as UL CSA ETL e Follow all instructions supplied by the display and wall mount manufacturers e If you have any doubts about your ability to safely install your flat panel display contact your retailer about professional installation Make sure that the wall where you are mounting the display is appropriate Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction If you are unsure contact a professional installer A minimum of wo people are required for installation Flat panel displays con be heavy CEA lectronics Association www CE org safety e SOS a IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions eep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Prot
65. by electronic and paper mail ill You should also get your employer if you work as a programmer or your school if any to sign a Redistribution and use in source and binary forms with or without modification are permit copyright disclaimer for the library if necessary Here is a sample alter the names ted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of condi ions and the following disclaimer in the documentation and or other materials provided Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker lt signature of Ty Coon gt 1 April 1990 Ty Coon President of Vice with the distribution That s all there is to it ga ome gt j a 3 All advertising materials mentioning features or use of this software must display the follow If you are interested in obtaining LGPL source code used in this product please contact ing acknowledgment This product includes software developed by the OpenSSL Project PEF USA Inc PO Box 430 Daleville IN 47334 0430 U S A for use in the OpenSSL Toolkit http Awww openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products deri
66. ce Guide to the playback screen e g Location 0 Jazz FM76 2FM Jazz jAzz jazz jazz Schonan Beach FM 78 9 1 Current hierarchy total number of items 2 Current station information Information will be changed when INFO is pressed 3 Color buttons red green yellow blue guide 4 Station list 5 Playback status 6 Station icon Add to favorite list You can add your favorite stations to Favorites in the category list To add your favorite stations follow the following procedure 1 Follow steps 1 to 3 in Internet radio playback on page 18 2 Use a v to select the station you want to add to Favorites then y press Color buttons yellow The selected station is added to Favorites folder Confirmation message will appear If you select a folder use 4 W to select the desired station in the next hierarchy then press Color buttons yellow Press OK 3 4 Press MENU to exit You can also add your favorite stations to Favorites on your PC To add your favorite stations on your PC visit http go2service vtuner com ph and create a vTuner account with the access code which you can check from the category list See Internet radio playback on page 18 You can change folder names or order of lists in your vTuner page on the internet e My_Favorite folder will appear after you add a station to Favorites on this unit Your favorite station will also be added to My_Favorite folde
67. cense However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of his License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties with this License If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simu
68. channel is added to or removed from the list of favorite channels 6 Press MENU to exit Switch to one of the channels on a list 1 Press OK on the remote control to display the last list that you selected 2 Use a v to highlight a channel 3 Press OK to select the channel t gt The TV switches to that channel Press CH to select channels in a list or press the numeric keys to select channels that are not in a list Setting the clock You can set the time on your TV Setting the time automatically Some digital channels transmit the time For these channels you can set the time automatically and choose which channel to read the time from 1 Press MENU on the remote control and then use a w 4 b to select Setup gt Installation gt Clock gt Auto clock mode 2 Select Automatic and then press OK to confirm your choice 3 Select the channel from which the TV reads the time Use a w and then press OK to enter the menu for Auto clock channel Use a to highlight a channel Press OK to confirm your choice 4 Optional Select the time zone Use a w and then press OK to enter the menu for Time zone Use a to highlight the time zone Press OK to confirm your choice 5 Optional Set daylight saving Use a and then press OK to enter the menu for Daylight saving Use a to high ight Automatic or Off ress OK to confirm your choice 6
69. cket outlet before all the connections are made Large screen TVs are heavy 2 people are required to carry and handle a large screen TV Before you move the TV disconnect attached cables to prevent damage to connectors In addition to reading and understanding safety instructions consider the following before positioning your TV Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power Ifthe TV is mounted on a swivel base ensure that no strain is placed on the AC power cord when the TV is swiveled Strain on the AC power cord can loosen connections The ideal viewing distance for watching TV is three times its screen size Position the TV where light does not fall on the screen Connect your devices before you position the TV Using a Kensington lock There is a Kensington security slot on the back of the TV Prevent theft by looping a Kensington lock between the slot and a permanent object such as a heavy table 55 46 1 Slide the battery cover off the back of the remote control 2 Insert the 2 supplied batteries AAA 1 5V Be sure the and ends of the batteries line up with the markings inside the case 3 Slide the cover back into position Note Remove the batteries if not using the remote control for an extended period of time Connecting the antenna or cable a c
70. co Escriba a continuaci n el modelo y n mero de serie que estan localizados en lado derecho y parte posterior de el gabinete de el televisor Lea esta manual antes de usar el producto MODEL NUMBER SERIAL NUMBER Contents 1 Notice 4 2 Important 5 Product information 3 Screen care 3 Environmental care 5 Regulatory notices 5 3 YourTV 6 Side controls and indicators 6 Remote contro 6 4 Get started 8 Supplied accessories 8 Mounting stand onto TV 8 Positioning the TV 8 Installing the remote contro batteries 8 Connecting the antenna or cable 7 Managing cables 0 Connecting the AC power cord 0 Switching on and initial setup 1 5 Use your TV 2 Switching on your TV and putting it in standby mode 2 Switching channels 2 Adjusting volume 3 Watching channels from a set top box 3 Watching connected devices 3 Watching a Blu ray disc 3 6 Use more of your TV 4 Access TV menus 4 Philips Wireless MediaConnect 5 View photos play music and watch videos using DLNA 3 Net TV 7 Enjoying vTuner 7 Pandora operations 9 Using Twitter 20 Changing picture and sound settings 22 Create and use lists of favorite channels 24 Setting the clock 25 Closed caption 25 Sleeptimer 26 Child and rating locks 26 Use Philips EasyLink 29 EasyLink 29 Set your location to home 30 etwork 30 View photos play music and watch videos on a USB storage device 33 7 Install channels 35 Selecting your menu
71. company will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory or 3 refund the original purchase price of the product Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes company property When a refund is given your product becomes company property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMI TATIONS This Limited Warranty applies only to new company manufac tured products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any hardware product or any software even if packaged or sold with the product as manufacturers suppliers or pub
72. complete the updating When the software update is complete press POWER at the side ofthe TV to make sure the unit goes to standby mode Switch on the TV L The TV starts up with the new software In order to update software via the internet you must connect the unit to the internet and set up necessary settings For the network connection refer to Connecting the TV to the internet using an Ethernet cable or Connecting the TV to the internet using a wireless LAN on page 41 For the network setup refer to Network on page 30 Please do not unplug the AC power cord or Ethernet cable while executing the Network update All settings will remain the same even if you update the software version The version of Netflix will also be updated if newer version of Netflix is available when updating the firmware EN 37 English 9 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Guide Connection overview SERVICE ONLY ooo COMPONENT coa Ome 0 0 O Pb Y S 4 Ethernet port For internet connection using an Ethernet cable with a RJ 45 connector O Component video and audio input jack Video input from analog devices such as DVD receiver game console etc This connector is used with audio input Composite video and audio input jack
73. contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use ft too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do these things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can
74. cs N V A17R8UD A17Q8UD A17P5UH OO
75. d and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively whe
76. de nor shall any other rights or licenses not expressly granted hereunder arise by implication estoppel or otherwise with respect to the Covered Code ii any trade name trademark or service mark whatsoever including without limitation any related right for purposes of endorsement or promotion of products derived from the Covered Code without prior written permission of SGI or iii any title to or ownership of the Original Code which shall at all times remains with SGL AI rights in the Original Code not expressly granted under this License are reserved Compliance with Laws Non Infringement There are various worldwide laws regulations and executive orders applicable to dispositions of Covered Code including without limitation export re export and import control laws regulations and executive orders of the US government and other countries and Recipient is reminded it is obliged to obey such laws regulations and executive orders Recipient may not distribute Covered Code that i in any way infringes directly or contributorily any intellectual property rights of any kind of any other person or entity or ii breaches any representation or warranty express implied or statutory to which under any applicable law it might be deemed to have been subject Claims of Infringement If Recipient learns of any third party claim that any disposition of Covered Code and or functionality wholly or partially infringes the t
77. e EasyLink buttons 4 backward Searches backward bb forward Searches forward 11 play pause Starts pauses or resumes playback e record Starts or stops video recording m stop Stops playback CH Switches to the next or previous channel Number buttons Select a channel page setting or input characters e Dot Press the dot for digital channels PREV CH Returns to the previously viewed channel FORMAT Selects a picture format See Changing picture format on page 23 VOL Increases or decreases volume MUTE Mutes or unmutes audio BACK Returns to a previous screen MENU EXIT Toggles the home menu on or off 17 AUTO MODE Cycles through preset picture and sound settings See Using auto mode on page 24 OPTIONS Displays a list of menu items applicable to the highlighted object or screen EN y English 4 Get started Supplied accessories Remote Control e 2xAAA 1 5V Batteries e M5 x 20 double sems screw x 4 AC Power cord Cable management tie User Manual Quick Start Guide Box inserts Mounting stand onto TV Applicable to TVs without mounted stands To wall mount the TV refer to the Quick Start Guide Ifyou lose the stand mounting screws please purchase 4 Phillips head screws M5x20 at your local store Positioning the TV Warning Do not insert the AC power cord into the power so
78. e Preferences menu to make the TV Speakers menu available when you select On or Speakers EasyLink Using auto mode 1 Press AUTO MODE to set your TV to a predefined picture and sound setting 2 Use a v to select one of the following settings Personal The customized settings you defined by using the Picture menu Sports Vivid picture settings and clear sound for high action Standard For normal TV viewing Movie Brilliant picture settings for a cinematic experience Game Optimized for PCs games consoles and playstations e Internet Video Optimized for low bitrate internet video Power Saver Eco TV settings for lower power consumption Create and use lists of favorite channels You can create lists of your preferred TV channels so that you can find those channels easily Select a list of favorite channels 1 Press FAV on the remote control AUTO OPTIONS T L gt Your lists of favorite channels are displayed 2 Use a v to highlight a list and then press OK to select the list Create or edit a list of favorite channels 1 Press FAV on the remote control to display your lists of favorite channels Use a to highlight a list and then press OK to select the list Press OPTIONS to enter edit mode t gt A list of channels is shown Use a w to highlight a channel Ur A W hn Press OK to select or deselect the highlighted channel tL The
79. e of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings a Warning To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus Battery Usage CAUTION To prevent battery leakage that may result in bodily injury property damage or damage to the unit e Install all batteries correctly with and alignment as marked on the unit Do not mix batteries old and new or carbon and alkaline etc Remove batteries when the unit is not used for a long time GROUND CLAMP ELECTRIC SERVICE EQUIPMENT ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H Note to the CATV system installer this reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical EN English 1 Notice
80. e selected files e Press OK or gt H to pause press OK or gt I again to resume Press bb to skip up the next file e Press e to skip down the previous file e Press to stop playback Press OPTIONS to display the optional menu then use a to select the desired item Setting items Off Sets repeat playback to off Repeat O Sets repeat playback for all MP3 files in the n current folder Off Sets shuffle playback to off Shuffle Sets shuffle playback for all MP3 files in the On current folder Of The sound will not be output from the unit s speakers On The sound will be output from the unit s TV speakers speakers Speakers You can control audio output from your pea connected EasyLink Compliant Devices with EasyLink VOL by using this unit s remote control Master EasyLink must be activated in the Preferences menu to make the TV Speakers menu available when you select On or Speakers EasyLink Watch videos using DLNA 1 Press a v to select a file or a folder 2 Press OK or bm to play the selected files e Press OK or bil to pause press OK or Pb HE again to resume e Press bb to fast forward search e Press lt to fast backward search Press W to stop playback L gt Press bl to resume from the point at which playback was stopped Press OK to play from the beginning of the file at which playback was stopped Press CH to play the next
81. eating a New Station By entering your favorite artists or songs Pandora selects music and creates a new station for you on the basis of the entered information 1 Onthe player screen press Color buttons blue to display station list Press Color buttons yellow to call up the Tool Menu Use a w to select Create a new station then press OK A Ww N Enter a name of your favorite artist or song then press OK while OK is selected Search result will appear on the right side of the TV screen e Ifthe selection screen of result type appears Use 4 w to select the desired type then press OK 5 Use a v to select the desired station then press OK to start the playback Resume the playback Pause the playback E Stop the playback and the station list will appear b gt E On the Tool Menu you can delete or rename the currently selected station Skips to the next song EN 19 English Guide to the Player Screen Using Twitter On the player screen you can set various options to the currently playing song You can view your Twitter feeds and more using the Twitter application on this unit For more details about Twitter please visit www twitter com 1 23 4 Logging in to Twitter After you set up the network connection you must log in with your Twitter account Make sure the unit is not in network service or Browse USB mode 1 Press NET TV on the remote contr
82. ect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer O Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 This product may contain lead or mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org 16 Damage Requiring Service The appliance should be serviced by qualified service personne when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the appliance or EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE NEC Do not defeat the safety
83. ector at the back of the TV The location of 3 the power connector varies according to TV model 2 Insert the AC power cord fully into the power connector 3 Connect the AC power cord plug to the power outlet Ensure that the cord is tightly secured at both ends 55 46 SO NS 2 Pass cables through the cable management tie to avoid tangles 55 46 40 Disconnect the TV from the power outlet Caution Pull the AC power cord by the plug do not pull on the AC power cord Unplug the AC power cord from the power outlet M m Unplug the AC power cord from the power connector at the back of the TV 10 EN Switching on and initial setup Before you switch on the TV check that the AC power cord is properly connected Press 1 POWER at the right side of the TV or press standby On on the remote control The TV normally takes 25 30 seconds to start up and the following screen appears the first time you turn on the TV After you read a welcome screen follow the on screen instructions to select your language and complete your TV setup Installation takes approximately 20 minutes English p DO D O O pD OK D 0 O P 0 Network setup screen will appear Use a w lt b to select Next gt Wireless Wired then press OK
84. eral Public License We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library We call this license the Lesser General Public License because it does Less to protect the users freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve this non free programs must be allowed to use the library A more frequent case is that a free library does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permissi
85. ess MENU on the remote control and then use a w lt P to select Setup gt Features gt Child lock 2 Enter your PIN See Setting your PIN on page 26 3 Use a v to select Channel Lock then press OK Channel Lock Select Caption settings Sleeptimer TV ratings lock Select Movie ratings lock Select Canada English ratings 1 Select Canada French ratings Select 4 Use a w and then press OK repeatedly to switch between locked and not locked Each rating has a box graphic in front of it to indicate whether it is locked A box with x indicates that the channel or input source is locked An empty box indicates that the channel or input source is not locked 5 Press MENU to exit Using the TV ratings lock Your TV is equipped with aV chip that allows you to control access to individual programs based on their age rating and content rating The program content advisory data are sent by the broadcaster or by the program provider If you receive channels through a set top box or cable box connected by HDMI you cannot use the TV ratings lock Your set top box or cable box must be connected through RF or AV connectors 1 Press MENU on the remote control and then use a w lt p to select Setup gt Features gt Child lock Enter your PIN See Setting your PIN on page 26 Use a w to select TV ratings lock then press OK D wN Use a w 4 b and then press OK repeatedly to swi
86. etting IP address setting will be set to Auto The manually entered number will be saved When IP address setting is set to Manual the setting of DNS setting will automatically be Manual and when P address setting is set to Auto you can set either Auto or Manual for DNS setting EN 31 English Proxy configuration 1 Press MENU on the remote control and then use a W lt gt to select Setup gt Installation gt Network gt Manual network settings gt Proxy configuration 2 Use a v to selecta setting and then press OK For default settings select Do Not Use If you need to change the proxy setting as instructed by your internet service provider to set the designated proxy address and port select Use Setting items Proxy setting Description DonotUse Not use the proxy server se Uses the proxy server Selects the number or word by using A v 4 then press OK Clear Clear the entered number or word All clear Clear all the entered numbers or words a A Switch between abc ABC and Cancel Shows the cancellation display OK Set the entered number or word Use a v or the Number buttons to input numbers Proxy address Proxy port Items can be selected only when Proxy port is set to Use 3 Press MENU to exit The range of input numbers for the port number is between 0 and 65535 if you enter
87. f the files Press OK or bl to pause the slide show tL The Il icon appears Press e or bb to move between images Press BACK or mM to stop the slide show Press OPTIONS to display the optional menu then use 4 w to select the desired item Set e Description Short Switches to the next image in 5 seconds Slide time Medium Switches to the next image in 10 seconds Long Switches to the next image in 15 seconds None No effect when switching images Dissolve Overlaps a next image on a current image Wipe right Pushes a current image out from left af Wipe left Pushes a current image out from right Transitions 1 s Wipe up Pushes a current image out from bottom Wipe down Pushes a current image out from top Box in A next image comes into the center from out Box out A next image goes to the out from center 0 Displays an image at its original direction 90 Rotates an image clockwise by 90 degrees Rotate 2 180 Rotates an image clockwise 180 degrees 270 Rotates an image clockwise 270 degrees 1x Displays an image at its original size Zoom 2 2x Magnifies a current image as twice 4x Magnifies a current image as fourfold You can set Slide time and Transitions when images are in Slide show 2 You can set Rotate and Zoom when Slide show is in pause mode 16 EN Listen to music using DLNA 1 Press a v to select a file or a folder 2 Press OK or PII to play th
88. file are subject only to the provisions of the License You may not use this file except in compliance with the License You may obtain a copy of the License at Silicon Graphics Inc attn egal Services 1600 Amphitheatre Parkway lountain View CA 94043 1351 or at tp oss sgi com projects FreeB ote that as provided in the License the Software is distributed on an AS IS basis with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS ISCLAIMED INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES AND ONDITIONS OF MERCHANTABILITY SATISFACTORY QUALITY FITNESS FOR A PAR CULAR PURPOSE AND NON INFRINGEMENT Original Code The Original Code is OpenGL Sample Implementation Version 1 2 1 released January 26 2000 developed by Silicon Graphics Inc The Original Code is Copyright c 1991 2000 Silicon Graphics Inc Copyright in any portions created by third parties is as indicated sewhere herein All Rights Reserved ditional Notice Provisions The application programming interfaces established by SGI in con netion with the Original Code are The OpenGL R Graphics System A Specification Version 2 1 released April 1 1999 The OpenGL R Graphics System Utility Library Version 1 3 released November 4 1998 and OpenGL R Graphics with the XWindow System R Version 1 3 released October 19 1998 This software was created using the OpenGL R version 1 2 1 Sample Implementation published by SGI but has not bee
89. g 2 3 Press OPTIONS on the remote control 4 Use a v to select Enable RC key forwarding or Disable RC key forwarding then press OK If RC key forwarding is set to off Enable RC key forwarding will be displayed If RC key forwarding is set to on Disable RC key forwarding will be displayed m When you set RC key forwarding on iid will be displayed at the top left of the device icons This function is available only when your devices are connected to this unit through HDMI cables and assigned to an HDMI port HDMI to HDMI4 with Add new devices in the home menu Philips Wireless MediaConnect You can enjoy your TV as a PC monitor wirelessly using your home network Make sure you download the Philips Wireless MediaConnect software and install it on your PC before you perform the steps below Install Philips Wireless MediaConnect 1 Press MENU on the remote control and then use aA v 4 to select Setup gt Software gt MediaConnect code e Write down the 12 digit code displayed on the screen You will need this to download MediaConnect software 2 Start your internet browser on your PC and open the Philips Wireless MediaConnect download page at www wifimediaconnect philips com On the website you can check the necessary PC system requirements Enter the 12 digit code you wrote at step 1 J us Click the Download now button to download the free Philips Wireless MediaConnect sof
90. g the movie on TV when the disc is playing on a PC The TV shows PC media files with a small delay Philips Wireless MediaConnect is only available for PC PC requirements Windows XP Windows Vista Windows 7 PC only Minimum PC requirements Intel Core 2 Duo 1 8GHz 512MB RAM EEE 802 11 Recommended PC requirements Intel Core 2 Duo 2 1GHz 1GB RAM View photos play music and watch videos using DLNA On your TV you can play video music and photo files stored on DLNA certified home media servers connected to your home network In order to use this feature you must connect this unit to the Internet It is recommended that files to be played back in this unit are recorded under the following specifications lt MP3 gt Sampling frequency Constant bit rate lt JPEG gt Upper limit lt MPEG gt e Playable codec e Maximum size of a video Audio type A maximum of 1 023 folders or files can be recognized For the home server list maximum of 16 servers can be displayed The 10th and deeper hierarchies cannot be displayed Unplayable files in the home server will not be displayed in the file list For some files playback is not available even if displayed in the file list In order to play back the contents in home servers the player and the servers must be connected to the same access point Compatibility and available playback function may differ depending on the home server Video file
91. get the source code If you link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you vis license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty for the free ibrary Also if the library is modified by someone else and passed on the recipients should know that what they have is not the original version so that the original authors reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license Most GNU software including some libraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary Gen
92. h the executable runs unless that component itself accompanies the executable lt may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or 10 11 12 13 14 NO WARRANTY 15 16 distribute the Library is void and will automatically terminate your rights under this Li
93. he connected device L gt The picture from your connected device might appear automatically on the TV screen 2 Use the remote control of the device to select channels If the picture does not appear 1 Press SOURCE repeatedly to select the connected device and walt a few seconds for the picture to appear 2 Use the remote control of the device to select channels Automatic Power Shut Off If there is no input signal and no operation for 15 minutes the unit will turn off automatically Watching a Blu ray disc To watch a Blu ray Disc 1 Inserta Blu ray Disc into your player 2 Press play on the remote control of the Blu ray Disc player tL The Blu ray Disc might automatically play on the TV If the picture does not appear 1 Press SOURCE repeatedly to select the Blu ray Disc player and wait a few seconds for the picture to appear 2 Use the remote control of the Blu ray Disc player to play the disc EN 13 English 6 Use more of your TV Access TV menus Menus help you to install channels change picture and sound settings then access other features Access the home menu The home menu gives you easy access to connected devices picture and sound settings as well as other useful features EXIT amp 1 Press MENU on the remote control NETTV 2 Use a w 4 to select and navigate through one of the following menus Watch TV Switc
94. hes back to the antenna source if another source is selected Browse USB Accesses USB menus Browse PC Accesses DLNA menus Net TV Accesses Net TV menus Add new devices Adds new devices to the home menu Setup Accesses menus that allow you to change picture sound and other TV settings Press OK to confirm your choice Press MENU to exit 3 4 After selecting Add new devices follow the on screen instructions to select the correct device and connector 14 EN Lock or unlock your device from the home menu This section describes how to lock or unlock specified device Press MENU on the remote control Use a w b to select a device to lock or unlock Press OPTIONS on the remote control Use a v to select Device lock or Device unlock then press OK WN If device lock is unlocked Device lock will be displayed f device lock is locked Device unlock will be displayed When device lock is locked will be displayed at the top right of the device icons 5 Enter your PIN See Setting your PIN on page 26 Once you have set PIN PIN input menu does not appear after the unit is turned on Enable or disable RC key forwarding from the home menu This section describes how to enable or disable RC key forwarding for a particular device 1 Press MENU on the remote control Use a w lt p to select a device to enable or disable RC key forwardin
95. hilips EasyLink Easy Link Your TV supports Philips EasyLink which enables one touch play and This function allows you to operate the linked functions between our one touch standby between EasyLink compliant devices Compliant brand devices with EasyLink capabilities and this unit connected via a devices must be connected via an HDMI connector HDMI cable One touch play 1 Press MENU on the remote control and then use a W lt gt to When you connect your TV to devices that support one touch play select Setup gt Installation gt Preferences gt EasyLink you can control your TV and the devices with one remote control For example when you press B play on your DVD remote control your Location Master EasyLink TV automatically switches to the correct channel to show the DVD E i content o v One touch standby RC Key forwarding Select When you connect your TV to devices that support standby you can HDMI ARC On use your TV remote control to put your TV and all connected HDMI devices in standby mode You can perform one touch standby using the Device List Select remote control from any of the connected HDMI devices System audio control When you connect your TV to HDMI CEC compliant devices your TV can switch automatically to play audio from the connected device To use one touch audio you must map the audio input from the connected device to your TV 2 Use a v to highlight the desired setting and then press
96. hird party s intellectual property rights Recipient will promptly notify SGI of such claim Versions of the License SGI may publish revised and or new versions of the License from ime to time each with a distinguishing version number Once Covered Code has been published under a particular version of the License Recipient may for the duration of the icense continue to use it under the terms of that version or choose to use such Covered Code under the terms of any subsequent version published by SGI Subject to the provisions of Sections 3 and 4 of this License only SGI may modify the terms applicable to Covered Code created under this License DISCLAIMER OF WARRANTY COVERED CODE IS PROVIDED AS IS ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY SATISFACTORY QUALITY FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT SGI ASSUMES NO RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE SHOULD THE SOFTWARE PROVE DEFECTIVE N ANY RESPECT SGI ASSUMES NO COST OR LIABILITY FOR SERVICING REPAIR OR CORRECTION THIS DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS LICENSE NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT SUBJECT TO THIS DISCLAIMER 10 LIMITATION OF LIABILITY UNDER NO CIRCUMSTAI WHETHER TORT INCLUDING WITHOUT LIMITATIO 11 12 43 Exhibit A License Applicabili
97. how the previous next episodes press Color buttons red green To enlarge playback screen press Color buttons blue EN 17 English 5 Press MENU to exit Ll Note Video service may not be fully available with narrowband internet connection e g 56k modem When watching video use broadband internet connection For details contact your internet service provider Depending on the bit rate of a station or the network environment it may take a while to complete loading the station or playback may not be available The streaming video may be interrupted during playback when the vTuner server is busy Some stations cannot be displayed in the list depending on the network environment If the loading time of a station exceeds 3 minutes the loading will be canceled The order of station episode in the list depends on the information from vTuner server and may change without notice Add to Favorites You can add your favorite stations to Favorites in the category tab To add your favorite stations follow the following procedure 1 Follow steps 1 to 2 in Video playback on page 17 2 Use a W lt 4 gt to select the station you want to add to Favorites then press Color buttons yellow The selected station is added to the station list in Favorites Confirmation message will appear Press Color buttons yellow to add your favorite station in Favorites while the desired episode is selected in the
98. image details for A V sync You will not experience A V sync issues for anything other than Cool More blue tones gaming or HTPC applications since the TV has internal A V sync functionality Eh Normal Standard tones Warm More orange tones Dynamic Off Sets Dynamic contrast to off contrasg On Automatically enhances contrast in an image Off Sets Digital Natural Motion to off Reduces judder in video using low intensity judder by digital filter oara Datura Minimum frame interpolation to make the video smooth Maximin Reduces judder in video using high intensity frame interpolation to make the video smooth oise Off Sets Noise reduction to off reduction On Reduces noise in an image Off Sets MPEG artifact reduction to off MPEG artifact reducci n On Reduces a blockiness and a blurriness and 22 EN Changing picture format 1 Press FORMAT on the remote control I S 5 c an VOL 2 Use a v to select a picture format and press OK to confirm your choice Summary of picture formats Display modes can be selected when the broadcasting station is sending 16 9 or 4 3 video signal And 3 types of display modes can be selected for PC input signal For 16 9 480i 480p 720p video signal
99. ing compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law f such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object ile is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work
100. ions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an ap
101. istributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is he
102. kHz 32kbps 320kbps 16Mpixel MPEG1 MPEG2 1920x1080 AC3 MPEG1 audio layer 3 MP3 MPEG1 audio layer 2 LPCM Note A maximum of 1 023 folders or files can be recognized Philips can not be held responsible if your USB storage device is not supported nor will Philips accept any liability for damage or loss of stored data The USB storage device is not supplied with the TV Do not use an extension cord and USB Hub to connect devices to this unit Always insert the USB flash memory in to this unit directly Connect a USB storage device 1 Turn on the TV 2 Connect the USB storage device to the USB port on the side of your TV 3 Use a lt gt to select Browse USB Press OPTIONS to display the optional menu then press OK to switch between List and Thumbnails 2009 09 08 2009 09 09 2009 09 10 2009 09 11 Picture Picture001 j Picture002 jpg Disconnect a USB storage device Caution To avoid damaging the USB storage device always exit the on screen menu and wait 5 seconds before you remove the USB storage device 1 Press MENU to exit the on screen menu 2 Wait 5 seconds then remove the USB storage device View your picture on a USB storage device 1 Inthe USB content browser use a to select Picture 2 Press a v to select a file or a folder on the USB storage device a o _ Picture001 jpg 3 Press OK or
103. kes you eligible for all of the valuable benefits listed below so don t miss out Complete and return your Product Registration Card at once or register online at www philips com support to ensure Product Safety Notification By registering your product you receive notification directly from the manufacturer in the rare case of a product recall or safety defect Additional Benefits of Product Ownership Registering your product guarantees that you receive all of the privileges to which you re entitled including special money saving offers For further assistance For further assistance call the customer support service in your country To obtain assistance in the U S A Canada Puerto Rico or the U S Virgin Islands contact Philips Customer Care Center at 1 866 309 0841 Product information This TV consumes minimal energy in standby mode to minimize environmental impact The active power consumption is given on the type plate at the back of the TV The model and serial numbers of your TV can be found on the back and right side of the TV as well as on the packaging Screen care e Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning Clean the TV
104. ld invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that systern itis up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so at distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License The Free Software Foundation may publish revised and or new versions of the General Public
105. lishers may provide a separate warranty for their own products pack aged with the bundled product The company is not liable for any damage to or loss of any pro grams data or other information stored on any media contained within the product or other additional product or part not cov ered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non supplied product b to damage caused by service performed by anyone other than company approved Authorized Service Location c to a product or a part that has been modified without written company per mission or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective product Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from vie
106. ltaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License If the distribution and or use of the Library is restricted in certain countries either
107. luded be construed again contract shal the ex ations Convention on Contrac Any law or regulation that provides that the language of a st the drafter shall not apply to this License ent portions of oftware License B Version 1 1 file are subject only to the provisions of the License You may not use this file except in ve License You may Legal Services 1600 Amphitheatre Parl http oss sgi com projects FreeB ote that as provided in the License tl PLIED WARRANT TATION ANY obtain a copy o way Mountain View CA 94043 1351 or at re Software is ES AND CO PUED WARRANTIES AND CONDITIONS OF s for the International Sale his file are made subject to an alternative he License the contents the License at Silicon Graphics Inc attn distributed on an AS IS basis with ALL DITIONS DISCLAIMED INCLUDING ERCHANTABILITY SATISFACTORY QUALITY FITNESS FOR A PARTICULAR PURPOSE AND ON INFRINGEMENT riginal Code The Original Code is name of software version number and release date developed by Silicon Graphics Inc The Original Code is Copyright c dates of first publication as appearing in the Notice in the Original Code Silicon Graphics Inc Copyright in any portions created Additio O Mv riginal by third parties is as indicated elsewhere herein All Rights Reserved nal Notice Provisions such add Code under the heading Additio
108. n describes how to connect a selection of devices with different connectors Different types of connectors can be used to connect a device to yourTV The following sections describe examples only other configurations are possible Connecting a set top box Blu ray Disc player and HD game console via HDMI OUT HDMI A e 000 set top box HDMI OUT a p a4 Blu ray Disc player HD game console HDMI Connecting a DVD player recorder via HDMI DVI and analog audio AUDIO IN E as l HDMI 4 IN only AUDIO o OUT Cl q DVI OUT DVD player recorder EN 39 English Connecting a digital home theater amplifer using HDMIARC HDMI 1 IN only i oe HDMI ARC digital home theater ampli HDMI The HDMI 1 connector is HDMI Audio Return Channel ARC compliant Use it to output digital audio to an HDMI Home Theater System Connecting a set top box DVD player recorder via component video connectors YPbPr and analog audio Vest 200 set top box or z DVD player recorder audio L R When you connect cables match the cable colors to the connectors on the TV 40 EN Connecting a set top box DVD recorder via composite connectors and analog audio IN
109. n independently verified as being compliant with the OpenGL R version 1 2 1 Specification SGI FREE SOFTWARE LICENSE B Version 1 1 02 22 2000 Definitions 1 Additional Notice Provisions means such additional provisions as appear in the Notice in Original Code under the heading Additional Notice Provisions 2 Covered Code means the Original Code or Modifications or any combination thereof 3 Hardware means any physical device that accepts input processes input stores the results of processing and or provides output 4 Larger Work means a work that combines Covered Code or portions thereof with code nat governed by the terms of this License 5 Licensable means having the right to grant to the maximum extent possible whether at the time of the initial grant or subsequently acquired any and all of the rights conveyed herein 6 License means this document 7 Licensed Patents means patent claims Licensable by SGI that are infringed by the use or sale of Original Code or any Modifications provided by SGI or any combination thereof 8 Modifications means any addition to or deletion from the substance or structure of the Original Code or any previous Modifications When Covered Code is released as a series of files a Modification is A Any addition to the contents of a file containing Original Code and or addition to or deletion from the contents of a file containing previous Modifications B A
110. n run you must cause it when started running for such interactive use in the most ordinary way to prin or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally prin such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole if identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the
111. nal Notice Provisions itional provisions if any as appear in the Notice in the PHILIPS P amp F USA Inc PO Box 430 Daleville IN 47334 0430 P amp F Mexicana S A de C V Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Edo de M xico C P 52787 TELEVISOR A COLOR DE CRISTAL LIQUIDO LCD MODELO IMAGEN VISIBLE ENERGIA SSPFL5706 F7 55 139 70cm 138 78cm 120V 60Hz 297W 46PFL5706 F7 46 116 84cm 120V 60Hz 235W Comercializado por P amp F MEXICANA S A DE C V IMPORTADOR SOJITZ MEXICANA S A DE C V Av Paseo de las Palmas No 239 302 Col Lomas de Chapultepec C P 11000 M xico D F Tel 52 55 5202 7222 EXPORTADOR FUNAI ELECTRIC CO LTD ENSAMBLADO EN MEXICO a 0 GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO onan NYCE LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO TELEVISOR A COLOR DE CRISTAL LIQUIDO LCD MODELO LCD IMAGEN VISIBLE ENERGIA 40PFL5706 F7 40 101 60cm 101 60cm 120V 60Hz 210W Comercializado por P amp F MEXICANA S A DE C V IMPORTADOR SOJITZ MEXICANA S A DE C V Av Paseo de las Palmas No 239 302 Col Lomas de Chapultepec C R 11000 M xico DF Tel 52 55 5202 7222 EXPORTADOR FUNAI ELECTRIC CO LTD PAIS DE ORIGEN CHINA GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO Philips and Philips Shield are used under license of Koninklijke Philips Electroni
112. necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking with the Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have already sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as a special exception the materials to be distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on whic
113. ng digital channels using Weak channel installation might not work for direct cable connections and if the digital signal is too weak for the TV to process Installation mode 1 Press MENU on the remote control and then use a v a to select Setup gt Installation gt Channels gt Installation mode 2 Use a v to select then press OK 3 Press MENU to exit Uninstall channels Those channels can still be selected with the Number buttons 1 Press MENU on the remote control and then use a W lt gt to select Setup gt Installation gt Channels gt Uninstall channels 2 Use a v to select the channel you want to remove then press OK You will not be able to select the channel again using CH e To reactivate a removed channel use 4 w and then press OK 3 Press MENU to exit Return your settings to default values When you return picture and sound settings to their default values the channel installation settings are not affected 1 Press MENU on the remote control and then use AlY lt 4 gt to select Setup gt Installation gt Reset AV settings gt Start now 2 Press OK to reset the picture and sound settings 3 Press MENU to exit EN 35 English 8 Update your TV software Philips continuously tries to improve tts products and we strongly recommend that you update the TV software when updates are available New software can be downloaded from our website at www philips com sup
114. nit s On TV speakers speakers You can control audio output from your connected EasyLink Compliant Devices with VOL by using this unit s remote control Speakers EasyLink The resume information will be kept even when the unit is turned off If you play another file while the previously viewed file is being resumed the resume information of the previously viewed file will be deleted The file or the folder in resume stop mode will be highlighted in gray on List or Thumbnails 7 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if available This chapter provides instructions on how to reinstall and fine tune channels Selecting your menu language 1 Press MENU on the remote control and then use a w 4 b to select Setup gt Installation gt Language Frangais Channels Preferences Espanol Software 2 Select a language and then press OK to confirm your choice 3 Press MENU to exit Autoprogram If you switch wires e g between antenna and CATV or if you move the unit to a different area after the initial setting you will need to perform autoprogram 1 Press MENU on the remote control and then use a W gt to select Setup gt Installation gt Channels gt Autoprogram gt Start now 2 Press OK to start the installation If you run Autoprogr
115. nnels __ CHANNEL HO E oo D Nn C EC Press CHANNEL on the side of the TV Press CH or enter a number on the remote control For digital channels press a number 1 to 999 followed by a dot te and then the corresponding sub channel number 1 to 999 e g 108 30 Press PREV CH to return to the previously viewed channel Adjusting volume VOLUME N GA MUTE E f gt A VOL wa To increase or decrease volume Press VOL on the remote control or press VOLUME on the side of the TV To mute or unmute sound Press MUTE on the remote control to mute the sound Press MUTE again or VOL to recover the original sound Watching channels from a set top box To watch channels from a set top box 1 Switch on the set top box tL The picture from your set top box might appear automatically on the TV screen 2 Use the remote contro of your set top box to select channels If the picture does not appear 0 SOURCE AUTO OPTIONS jajaj gt EXIT menu 3 1 Press SOURCE repeatedly to select the set top box and wait a few seconds for the picture to appear 2 Use the remote control of your set top box to select channels Watching connected devices To watch connected devices 1 Switch on t
116. nt its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND 0 ODIFICATION This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Prograrn means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without vlimitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricte
117. ntellectual property claims for the duration of intellectual property protections inherent in the Criginal Cade SG hereby grants Recipient a worldwide royalty free non exclusive license to do the following i under copyrights Licensable by SGI to reproduce distribute create derivative works from and to the extent applicable display and perform the Original Code and or any Modifications provided by SGI alone and or as part of a Larger Work and ii under any Licensable Patents to make have made use sell offer for sale import and or otherwise transfer the Original Code and or any Modifications provided by SGI Recipient accepts the terms and conditions of this License by undertaking any of the aforementioned actions The patent license shall apply to the Covered Code if at the time any related Modification is added such addition of the Modification causes such combination to be covered by the Licensed Patents The patent license in Section 2 1 ii shall not apply to any other combinations that include the Modification No patent license is provided under SGI Patents for infringements of SGI Patents by Modifications not provided by SG or combinations of Original Code and Modifications not provided by SGI Recipient License Grant Subject to the terms of this License and any third party intellectual property claims Recipient hereby grants SG and any other Recipients a worldwide royalty free non exclusive license under any Recipient
118. ny new file that contains any part of the Original Code or previous Modifications 1 9 Notice means any notice in Original Code or Covered Code as required by and in compliance with this License 1 10 Original Code means source code of computer software code that is described in the source code Notice required by Exhibit A as Original Code and updates and error corrections specifically thereto 1 11 Recipient means an individual or a legal entity exercising rights under and complying with all of the terms of this License or a future version of this License issued under Section 8 For Taz TISE 1 14 2 24 22 23 3 2 3 3 legal entities Recipient includes any entity that controls is controlled by or is under common control with Recipient For purposes of this definition control of an entity means a the power direct or indirect to direct or manage such entity or b ownership of fifty percent 50 or more of the outstanding shares or beneficial ownership of such entity Recipient Patents means patent claims Licensable by a Recipient that are infringed by the use or sale of Original Code or any Modifications provided by SGI or any combination thereof SGI means Silicon Graphics Inc SGI Patents means patent claims Licensable by SG other than the Licensed Patents License Grant and Restrictions SGI License Grant Subject to the terms of this License and any third party i
119. o and then use 4 w b to select Twitter Login screen will appear 2 Use a y to select Username then press OK Software keyboard will appear 1 Give thumbs up to the currently playing song Pandora will play songs similar to the song 2 Give thumbs down to the currently playing song Characters Select each one of characters from the list Pandora will skip and will not play the song Clear Delete the last character in the entry field 3 Bookmarks the currently playing song All clear Delete all characters in the entry field You can view your bookmarked songs list by A A O Switch case and symbols accessing Pandora website and log into your T i Cancelthe account ance ancel the input 4 Tells Pandora that you do not like the currently OK Determine the input Username and or Password playing song Pandora will not play the song for about a month 3 Use a W 4 gt to input your Username and Password into the entry fields Select OK after you have filled in all the necessary items in the entry field then press OK e Password can be skipped next time onwards once you have selected Remember me when registering the user name Software keyboard will disappear 4 Use a w 4 gt to select Start then press OK The unit will now establish a connection with the Twitter server and perform authentication 5 When the unit is logged in successfully Twitter Home menu will
120. o device is a child device on your graphics card which means your graphics card video amp HDMI audio drivers need to be up to date and bug free we have seen many cases where having a bad video driver resulted in no HDMI audio Make the TV the only output device Sometimes if you extend your desktop to the TV or duplicate the desktop with another monitor or your laptop screen Windows does not make the HDMI audio devices as the default audio playback device 10 Troubleshooting Problem Possible cause and solution No power or indicator light The TV is not connected to the power ress POWER at the side of the TV or on the remote control Ensure that the AC power cord is connected tightly to the TV power connector and to the power socket outlet Remove the AC power cord from the power socket outlet wait 60 seconds and reconnect the AC power cord Connect the TV to a different power socket outlet No picture or sound is detected from the device using HDMI 1 4 input jack HDCP authentication fail Ensure that your HDMI cable is certified ress SOURCE on the remote control to switch to another source and then switch back to the HDMI source Reset the accessory device and the TV Turn on the TV Select the HDMI channel Turn on the accessory device While the TV and the accessory device are powered on unplug either end of the HDMI cable and then reinsert the cable No sound is detected from the
121. o language multiple languages are broadcast Lists available audio languages Available for analog channels only when a main Main and second audio program SAP is broadcast Alternate audio Select the main audio program b Available for analog channels only when a main SAP and second audio program SAP is broadcast Select the second audio program Mono Outputs mono audio Mono Stereo i Stereo Outputs stereo audio 24 EN Description Sets SRS TruSurround HD to off Selects available modes for surround sound SRS Off TruSurround HD On Off Sets AVL to off AVL Auto Volume Leveling On Reduces sudden changes in volume for example during commercials or when switching channels Of The sound will not be output from the unit s speakers On The sound will be output from the unit s TV speakers speakers Speakers You can control audio output from your ESsy Link connected EasyLink Compliant Devices with VOL by using this unit s remote control avigate to that channel or input device and Too set a negative detta Loud volume level as per your K a channa ersonal preferences Delta volume or input device is avigate to that channel or input device and Too Soft set a positive delta volume level as per your ersonal preferences 4 Press MENU to exit Master EasyLink must be activated in th
122. olkit stays under a dual license ie both the conditions of the OpenSSL License FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL and the original SSLeay license apply to the toolkit See below for the actual license texts Actually THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR both licenses are BSD style Open Source licenses in case of any license issues related to OpenSSL OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE please contact openssi core openssl org ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE ORTHE USE OR OpenSSL License OTHER DEALINGS INTHE SOFTWARE g50AP gSOAP Public License Part of the software embedded in this product is gSOAP software Portions created by SOAP are Copyright C 2001 2009 Robert A van Engelen Genivia inc All Rights Reserved THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT NCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT OT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY ORTORT INCLUDING EGLIGENCE OR OTH
123. on software is covered by the GNU Library General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For the example if you distribute copies of such a program whether gratis or for a fee you must give recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we wa
124. on to use a particular library in non free programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those funct
125. onnection test passes you are ready to use Net TV or network update function using the internet without making any additional settings If the connection test fails check if the Ethernet cable is connected to this TV properly or if you have entered all the required details for the wireless LAN connection properly Wireless network This menu is displayed only when you set Wireless in Network selection In order to use a wireless network you must set up a connection to the Wireless LAN Access Point AP e g wireless router Wireless network setting Auto Search for wireless networks automatically and select the wireless network name SSID from the list 1 Press MENU on the remote control and then use 4 w 4 to select Setup gt Installation gt Network gt Manual network settings gt Wireless network setting gt Auto This unrt will start searching for wireless networks automatically 2 The list of wireless networks will be displayed Use a w to select the appropriate wireless network name SSID then press OK e Ifyou select the wireless network name SSID with A WEP WPA Key entry screen will appear Enter the WEP WPA key of the selected wireless network using amp w lt 4 p then press OK Clear Clear the entered number or word All clear Clear all the entered numbers or words a A Switch between abc ABC and Cancel Shows the cancellation display OK Set the entered n
126. or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These imits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Declaration of Conformity Trade Name PHILIPS Responsible Party P amp F USA Inc Model 55PFL5706 46PFL5706 40PFL5 706 Address PO B
127. ork device such as Default gateway 1 3 ROA 8 y router which provides internet access DNS setting Auto mode Manual Primary DNS 2 3 Sets the DNS setting automatically Sets the DNS setting manually A server which handles the name and IP address over the internet A server which handles the name and IP 2 3 ANS address over the internet An address which recognizes the devices connecting to the network It is also called Hardware Address MAC address 1 Items can be selected only when IP setting mode is set to Manual 2 Items can be selected only when DNS setting mode is set to Manual 3 Use a w or the Number buttons to input numbers When you press 4 to input numbers then press OK or input the triple digits by using the Number buttons the cursor moves to the next entry field When you press 4 w to input numbers then press OK or input the triple digits by using the Number buttons at the rightmost entry field numbers will be stored and go back to the previous menu 3 Press MENU to exit The range of input numbers is between 0 and 255 if you enter a number larger than 255 the number will automatically be 255 The manually entered number will be saved even if you change the setting to Auto if you want to enter 1 or 2 digit number in one cell press OK to move on to the next cell gt ifthe entered IP address or the default gateway or primary DNS number is same as the default s
128. ote control and then use a4 w b to select Setup gt Features gt Change PIN 2 Entera 4 digit PIN on the Number buttons of the remote control Ifyou have a PIN enter your current PIN Ifyou do not have a PIN enter 0 0 0 0 Ifyou have forgotten your PIN enter 0 7 1 1 3 Enter your new PIN 4 Enter your PIN again to confirm 5 Press MENU to exit Lock the TV This section describes how to lock all channels on the TV At the specified time screen is blanked out and the audio is muted Ensure that the clock is set with the current time See Setting the clock on page 25 Press MENU on the remote contro and then use a w 4 b to select Setup gt Features gt Child lock Enter your PIN See Setting your PIN on page 26 Use a v to select Lock after then press OK Press OK to select Timer Use a w to select On and activate the Lock after feature Select Off to deactivate the feature Press OK to confirm your choice ON AmBwW N Use a w to select Time and then press OK to set the time Use the format HH MM and select AM PM for morning or afternoon 9 Press BACK to confirm the time 1 0 Press MENU to exit 11 Turn the TV off and on again Locking a channel or input source This section describes how to lock input sources or specified channels The channels can be selected but the screen is blanked out and the audio is muted 1 Pr
129. ow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc P e IN 47334 0430 061708 EN 45 English 13 Index A Antenna connect 9 Audio 24 Audio setting 24 Auto mode 24 Auto TV on 29 Auto volume leveling 24 B Blockbuster 17 C Cables component 39 composite 39 connection quality 39 HDMI 39 manage cables 10 YPbPr 39 Channels install 35 lock 27 Child lock channel lock 27 PIN 26 ratings lock 26 27 28 Clock 25 Closed caption 25 26 Cloud TV 17 Connections 9 38 39 Controls 6 Customer support service 5 D Device List 29 Device lock 14 E EasyLink 29 Environmental care 5 Equalizer 24 F FAV 24 25 Film Fresh 17 Home mode 11 30 Initial setup 11 Location Retail store or Home 11 30 M Master EasyLink 29 Mounting stand onto TY 8 46 EN N Netflix 17 Network 30 P Pandora 19 20 PC 22 Philips Wireless MediaConnect 15 Picture format 23 Picture settings 22 R Ratings 26 27 28 RC key forwarding 14 29 Remote control insert batteries 8 overview 6 7 Retail store mode 11 30 S Settings assistant 11 22 Signal quality 39 Sleeptimer 26 Software Update 36 version 36 Speakers EasyLink 24 34 Specifications 44 Standby 6 12 T Troubleshooting 43 TV a
130. ownloading an electronic copy To obtain an electronic copy of this manual Ui WN Point your browser to www philips com support Choose your country of location Enter the model number or a keyword in the Find your product field Alternatively you can browse the catalog Click the description or model Under Product support click User manuals Contact us If you cannot resolve your problem refer to the FAQ for this TV at www philips com support If the problem remains unresolved contact the Customer Support Center in your country Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to yourTV or void your warranty Note Please have available your TV model and serial number before contacting us These numbers are available on the back and side of your TV as well as on the packaging EN 43 English 11 Specifications Note Specifications are subject to change without prior notice Power Power requirements 120V AC 10 60Hz 0 5 Picture enhancement Type 1080p 120Hz Aspect ratio 16 9 Viewing angles 178 V by 178 H Built in digital tuner ATSC Sound enhancement Mono Stereo Mono Stereo SRS TruSurround HD Power output 20 W RMS watts Equalizer 5 band Ease of use Video modes Automatic 4 3 Movie Expand 14 9 Movie Expand 16 9 Super Zoom
131. ox 430 Daleville IN 47334 0430 U S A Telephone Number 1 866 309 0841 Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Philips Consumer Electronics may void the user s authority to operate the equipment Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice Standard Television Receiving Apparatus Canada BETS 7 NTMR 7 This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations 4 EN property of Koninklijke Philips Electronics N V or their respective owners FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Country Code Statement For product available in the USA market only channel 1 11 can be operated Selection of other channels is not possible To maintain compliance with FCC RF exposure requirements use only belt clips holsters or similar accessories that do not contain metallic components in its assembly The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should
132. p with strong violence strong language and strong sexual content 18ans Only to be viewed by adults and contains extreme violence and graphic sexual content pornography TheV Chip can block non rated programs as per CEA 608 E sec L3 Ifthe option to block None NR E or E programs is used in TV ratings lock Movie ratings lock Canada English ratings lock or Canada French ratings lock accordingly unusual results may occur and the unit may not receive emergency bulletins or other types of programming Emergency Bulletins Such as EAS messages weather warnings and others Locally originated programming News Political Public Service Announcements Religious Sports Weather Use the region ratings lock You can control access to digital programs based on downloaded region ratings Before you download a ratings table ensure that regional ratings are broadcast 1 A Ww N Press MENU on the remote contro and then use 4 w 4 b to select Setup gt Features gt Child lock Enter your PIN See Setting your PIN on page 26 Use a v to select Region ratings lock then press OK Use a w and then press OK repeatedly to switch between locked and not locked Each rating has a box graphic in front of it to indicate whether it is locked e A box with x indicates that the rating locked An empty box indicates that the rating is not locked Press MENU to exit Use P
133. plication Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you m
134. port using the model number of your TV e g 55PFL5706 to find information Checking your current software version 1 Press MENU on the remote control and then use a W lt gt to select Setup gt Software gt Software information gt Select L The version and a description of the current software is displayed D Software information e are upaate 2 Press MENU to exit Preparing for the software update by USB You require the following equipment A PC with web browsing capability e An archive utility that supports the ZIP format e g WinZip for Windows or Stufflt for Mac OS e An empty clean formatted USB stick Note Only FAT DOS formatted portable memory is supported New software can be downloaded from www philips com support Use only software updates that can be found on the Philips web site IN Warning When the software update is running don t press any buttons Do not remove the USB storage device during the software update Ifan error occurs during the update retry the procedure or contact your dealer Downloading the software 1 On your PC open a web browser and go to www philips com support Find information and software related to your TV and download the latest software update file to your PC 2 3 Decompress the ZIP file 4 Copy the update file to the root directory of the USB storage device 36 EN Updating software USB
135. program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License f you are interested in obtaining GPL source code used in this product please contact PEF USA Inc PO Box 430 Daleville IN 47334 0430 U S A LGPL GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright C 1991 1999 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing tt is not allowed This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License version 2 hence the version number 2 1 Preamble The licenses for most software are designed to take away your freedom to share and change it By
136. propriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the ap
137. r Remove from favorite list 1 Folow steps 1 to 2 in Internet radio playback on page 18 2 Use a v to select Favorites then press OK 3 Use a v to select the station you want to remove from Favorites then press Color buttons yellow Confirmation message will appear 4 Use lt gt to select Yes then press OK The selected station is removed from Favorites folder 5 Press MENU to exit Add stations on the vTuner website You can add stations which are not in the vTuner station list 1 Follow steps 1 to 2 in Internet radio playback on page 18 2 Use a v to select Get access code then press OK The latest vluner website address and access code for this unit will be displayed Please take a note of the access code This access code will be required when creating a vTuner account 3 On your PC visit the website and create your vTuner account e Follow the instructions given on the PC screen 4 Add stations by following the instructions given on the PC screen The stations will be added to My Added Stations Reset the station list You can remove all stations folders in Recently Played Favorites and My Added Stations 1 Follow steps 1 to 2 in Internet radio playback on page 18 2 Use a v to select Reset then press OK 3 Use a to select Yes then press OK All stations folders in Recently Played Favorites and My Added Stations are removed 4 Press MENU
138. rivatives of our free software and of promoting the sharing and reuse of software generally BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FORTHE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITINESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF ALL ECESSARY SERVICING REPAIR OR CORRECTION IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU ORTHIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES END OFTERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and
139. s ANT AN Composite Video and Audio YPbPr Component Video Input HDMI For information about how to connect a set top box see the Quick Start Guide provided If you connect a set top box through RF IN OUT If the TV is connected to a cable box or satellite set top box via a coaxial connection set the TV to channel 3 or 4 or to the channel specified by the service provider If you connect a set top box through HDMI If the TV is connected to a cable box or satellite set top box via HDMI make sure you select the correct HDMI source by using SOURCE on this unit s remote control If you connect a set top box through component video input If the TV is connected to a cable box or satellite set top box via component video input make sure you select the correct component video source by using SOURCE on this unit s remote control RF cable set top box audio UR EN 9 English Managing cables Connecting the AC power cord Route your antenna cable and all other cables through the cable management tie at the back of the TV The holder helps keep your cables tidy and easily manageable Warning Verify that your power voltage corresponds with the voltage printed at the back of the TV Do not insert the AC power cord if the voltage is different 1 Attach the cable management tie as illustrated below 55 46 1 Locate the power conn
140. s PC monitor 23 24 42 connections 9 38 39 controls 6 menu 14 position 8 remote control 6 7 8 screen care 5 software 36 switch channels 12 switch on 11 12 TV Speakers 24 Twitter 20 U USB 33 34 V Volume adjust 13 auto volume leveling 24 mute 13 vTuner 17 VUDU 17 W Warranty 45 Wireless LAN 30 41 Y YPbPr 39 License This section describes software license used for this product This product uses some open source software GPL software linux gec binutils busybox dheped LGPL software directfb glibc Qt LITE BSD WPA Supplicant GPL T expat lua lua xmlreader lua sincrypto libxml2 c ares Free Type LibJPEG Open SSL JSON_Parser gSOAP libcurl Open GL The GNU General Public License GPL Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02 11 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is Preamble not allowed The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundati
141. s with unsupported audio format will be skipped The quality of the playback picture or audio differs depending on your network condition 32kHz or 44 1kHz or 48kHz 32kbps 320kbps 16Mpixel MPEG1 MPEG2 1920x1080 AC3 MPEG1 audio layer 3 MP3 MPEG audio layer 2 LPCM Before using DLNA Follow the following procedure before using DLNA 1 Connect this unit to the internet See Connecting the TV to the internet using an Ethernet cable or Connecting the TV to the internet using a wireless LAN on page 41 Broadband internet connection of 8Mbps or faster is required 2 Set up the necessary network connection settings See Network on page 30 Using DLNA 1 Start DLNA home media servers in your home network For details refer to the user manual of the DLNA certified device 2 Press MENU on the remote control 3 Use 4 v 4 to select Browse PC This unit will start loading the home server list 4 After loading home server list will appear Select a home server 2 PP you want to access then press OK EN 15 English Guide to DLNA Title Album Duration 00 03 41 Year Home server list Folder media icon Group folder file list Image U A w N Current file info View your pictures using DLNA 1 Press amp W to select a file or a folder 2 Press OK or PI to start a slideshow o
142. sclaimer in the documentation and or other materials provided with the distribution 3 Neither the name s of the above listed copyright holder s nor the names of its contributors SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS IN may be used to endorse or promote products derived from this software without specific TERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN prior written permission CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ARISING IN ANY WAY OUT OFTHE USE OFTHIS SOFTWARE EVEN IF ADVISED OF THE AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED POSSIBILITY OF SUCH DAMAGE TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR a ENE a O O PE PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR his product inc aludes cryptographic software written by Eric Young eay cryptsoft com CONTRIBUTORS BE LIABLE FORANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY This product includes software written by Tim Hudson tih cryptsoft com OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER Original SSLeay License IN CONTRACT STRICT LIABILITY OR TORT INCLUDING
143. ss MENU on the remote control and then use a W lt gt to select Setup gt Features gt Caption settings gt Closed captions 2 Press a v to select On Off or On during mute and press OK to confirm your choice 3 Press MENU to exit av Selecting DTV caption services 1 Selecta caption service for digital channels Press MENU on the remote control and then use a w 4 b to select Setup gt Features gt Caption settings gt Digital caption service Use a v to select one of the listed caption services and then press OK to confirm your choice Select one of these before changing any other item in Caption settings menu Choose CS 1 under normal circumstances 2 Press MENU to exit CS 1 to CS 6 Selecting how captions are displayed You can choose the size font color background and other characteristics of the caption text 1 Press MENU on the remote control and then use 4 w 4 p to select Setup gt Features gt Caption settings gt Digital caption options Use a to highlight an option for digital captions and press OK to select the option 2 3 Use a v to highlight a setting for the option and press OK to confirm your choice 4 Press MENU to exit EN 25 English Difficulties viewing closed captions on DTV programming IF you have difficulties viewing closed captions on DTV programming including HDTV received from your subscription tele
144. st Popular Stations List of popular station Get access code Displays the access code which will be required when creating a v Tuner account on your PC Reset Removes all stations folders in Recently Played Favorites and My Added Stations 3 In the station folder list use 4 w to select the desired station then press OK After loading playback of the selected station will start Ifyou select a folder use a to select the desired station in the next hierarchy then press OK e To stop playback press W To go back to the previous or next hierarchy press b 4 Press MENU to exit This unit cannot play back stations with audio format other than MP3 and WMA Internet radio service may not be fully available with narrowband internet connection e g 56k modem When listening to internet radio use broadband internet connection For details contact your internet service provider Depending on the bit rate of a station or the network environment it may take a while to complete loading the station or playback may not be available The streaming audio may be interrupted during playback when the vTuner server is busy Some stations cannot be displayed in the list depending on the network environment If the loading time of a station exceeds 3 minutes the loading will be canceled The order of station folder in the list depends on the information from vTuner server and may change without noti
145. t reproduce the above copyright notice this list of condi tions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the fol lowing acknowledgement This product includes cryptographic software written by Eric Copyright 1998 1999 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright 2001 2002 2003 2004 2005 2006 Expat maintainers lua Copyright 1994 2010 Lua org PUC Rio lua xmireader Copyright 2008 A S Bradbury lua sinerypto Copyright 2005 Malete Partner Berlin partnen malete org libxmi2 Copyright 1998 2003 Daniel Veillard All Rights Reserved eK KK KK HK KH KK KR KH KR HK KR HK HH HR OH cares Young eay cryptsoft com The word cryptographic can be left out if the rouines from Copyright 1998 by the Massachusetts Institute of Technology the library being used are not cryptographic related Fee ee tee ene ears rs Set nce SRE 4 If you include any Windows specific code or a derivative thereof from the apps directory Permission is hereby granted free of charge to any person obtaining a copy of this software application code you must include an acknowledgement This product includes software and associated documentation files the Software to deal in the Software without res
146. t the same time Cannot play back internet radio The quality of the internet radio audio is poor or noise occurs during playback of internet station Cannot use the wireless connection Cannot get into the PC s screen even the Philips Wireless MediaConnect is launched I have a 1 8GHz CPU but MediaConnect does not work on my PC Check if the network connection is properly made Check the firewall setting of the modem or router For some stations playback is not available on this unit The bit rate of the station is low Check if the Wireless LAN Access Point AP e g wireless router is oriented properly or not placed too close between them Once you have activated the wireless connection please wait 30 seconds for the connection to be established after turning on the unit before trying to access network features such as Net TV The start up screen PHILIPS logo with spinning circle keep displaying until the unit found the PC that is running Philips Wireless ediaConnect ake sure if the network connection is connected properly Check if your PC runs Philips Wireless MediaConnect ake sure your TV and PC are connected on the same network For smooth operation of your PC while Philips MediaConnect is running you need a mainstream dual core processor from Intel or AMD intel Core2Duo or Core 13 5 7 1 8GHz or higher AMD Athlon H X2 Turion 1 Dual Core or Phenom X2 2GHz or higher D
147. tch between locked and not locked Each rating has a box graphic in front of it to indicate whether it is locked A box with x indicates that all items in the content ratings list are locked An empty box indicates that no items in the content ratings list are locked A box with indicates that some items in the content ratings are already locked and some items remain not locked Channel Lock _ None atinas Movie ratings lock 1TV Y7 LLTV G LITV PG _ITV 14 Canada Fren LITV MA When you select AII all items in the ratings list are locked When you select None programs with no rating and programs with a rating of none are locked When you lock a rating all ratings in the younger age categories are automatically locked 5 Press MENU to exit Summary of TV ratings Age rating Content rating All None None None TV Y Appropriate for children of all ages with themes None and elements suitable for children aged 2 6 TV Y7 Programs designed for children age 7 and older Fantasy Violence TV G Programs suitable for all ages These programs None contain little or no violence no strong language and little or no sexual dialog or situations TV PG Programs contain elements that some parents may find unsuitable for younger children and Language which may need parental guidance The program Sex may contain moderate violence sexual dialog Violence and
148. ted on the proper stands or installed according to the manufacturer s recommendations e Flat panel displays that are inappropriately situated on dressers bookcases shelves desks speakers chests or carts may fall over and cause injury THIS MANUFACTURER CARES The consumer electronics industry is committed to making home entertainment enjoyable and safe EN Congratulations on your purchase As you enjoy your new product please keep these safety tips in mind TUNE INTO SAFETY One size does NOT fit all Follow the manufacturer s recommendations for the safe installation and use of your flot panel display Carefully read and understand all enclosed instructions for proper use of this product Don t allow children to climb on or play with furniture and television sets Don t place flat panel displays on furniture that can easily be used as steps such as a chest of drawers Remember that children can become excited while watching a program especially on a larger than life flat panel display Care should be taken to place or install the display where it cannot be pushed pulled over or knocked down Care should be token fo route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children WALL MOUNTING IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY ALWAYS e Use a mount that has been recommended by the display manufacturer and or listed
149. tings are not available Mode selection will not be displayed when incoming signals are other than 720x480p 60Hz 1280x720p 60Hz and 1920x 1080p 24 30 60Hz Setting items Description Digital Natural Motion if the input video contains adjacent video frames with z a inherent motion blur captured by the video camera Digital Natural Motion will Settings assistant Use Settings assistant to guide you through interpolate blur and cause streaking artifacts in high motion scenes If the content the best picture settings you are watching causes a lot of Interpolation Induced Blur Amplification it is best to turn off Digital Natural Motion temporarily Contrast ee the Hasler PSP Digital Natural Motion uses frame interpolation to make the video appear a eN smooth which causes a video lag of about 200 milliseconds If you are using the TV Brightness Adjusts the intensity and details of dark areas for gaming or as a PC monitor DNM will introduce lag If your gaming system has a F F lag adjustment feature for your game controller use it to negate the lag or else turn Color Adjusts color intensity off DNM for any application where lag is an issue If your prefer to use DNM while Tint Adjusts the color balance in an image watching movies on your Home Theater PC HTPC and are using an external Audio Receiver for sound output set a 200 millisecond delay on your audio output Sharpness Adjusts the level of sharpness in
150. to select Twitter 2 Use a 4 gt to select the desired user name then press OK If you have not stored the password the user name 3 will appear beside 3 When the unit is logged in successfully Twitter Home menu will appear at the left and the timeline will appear at the bottom of the TV screen Note oe 4 user names accounts can be stored in this unit Viewing Favorites on Twitter Your TV displays the logged in user s favorites on Twitter 1 Follow steps 1 to 2 in Viewing tweets on the TV on page 21 2 Use a v to select Favorite then press OK If you have no favorites TV was not able to acquire the Tweet will appear Displaying Mentions on Twitter Your TV displays replies for the logged in user 1 Folow steps 1 to 2 in Viewing tweets on the TV on page 21 2 Use a v to select Mentions then press OK e Ifyou have no replies TV was not able to acquire the Tweet will appear Viewing Lists on Twitter The list shows timeline categories such as friends family colleagues or sports teams created by yourself on your account 1 Follow steps 1 to 2 in Viewing tweets on the TV on page 21 2 Use a v to select List then press OK e Ifyou have no lists Cannot get the list information will appear 3 When you press Color buttons yellow in 1 or 5 list view the timeline will be separated at top and bottom The upside displays timelines
151. triction written by Tim Hudson tjh cryptsoft com including without limitation the rights to use copy modify merge publish distribute sublicense and THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS 15 AND ANY EXPRESS OR or sell copies of the Software and to permit persons to whom the Software is furnished to do so IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRAN subject to the following conditions TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS The above copyright notice and this permission notice shall be included in all copies or substantial CLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR Origine Bes hice ES p ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL p i DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE THE SOFTWARE S PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUP OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY TION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CON FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL TRACT STRICT LIABILITY ORTORT INCLUDING NEGLIGENCE OR OTHERWISE ARIS THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR ING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE
152. tware 5 Once downloaded start the file Philips Wireless MediaConnect_ setup exe Follow the instructions on the screen to complete software installation Using Philips Wireless MediaConnect T Launch Philips Wireless MediaConnect on your PC first Select Start projecting with right click on the i system tray The start up screen for Philips Wireless MediaConnect will be displayed and the unit searches for an available PC that is running Philips Wireless MediaConnect software Once connected the Philips Wireless MediaConnect software will encode and stream the screen of your PC as a video along with audio Depending on your computer and network configuration there will be a delay between your PC screen and the TV but the audio video will always be in sync Philips Wireless MediaConnect Help To read the Philips Wireless MediaConnect Help right click the program icon in the notification tray of the PC and select Help Specifics You can project high definition HD or standard definition SD video depending on the processing power of your PC For smooth playback of HD video please use a hardware accelerated video player on your computer A hardware accelerated video player uses the graphics adapter of your PC to render HD video rather than the processor This frees up the processor for Philips Wireless MediaConnect video encoding The content protection on most DVD or Blu ray Disc movies might restrict watchin
153. tware gt Netflix ESN Displays the ESN Electronic Serial Number to get any services from Netflix 2 Press MENU to exit VUDU deactivation Displays the deactivation setting for VUDU 1 Press MENU on the remote control and then use a w 4 b to select Setup gt Software gt VUDU deactivation 2 Use a v to select the desired option then press OK Deactivate the connection to VUDU No Activate the connection to VUDU 3 Press MENU to exit View photos play music and watch videos on a USB storage device Caution This unit accepts USB flash memory only Other storage devices such as external HDD by USB bus power will not work Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Your TV is fitted with a USB connection that enables you to view photos or listen to music stored on a USB storage device Supported formats Not supported formats MP3 File name exceeding 256 characters JPEG Progressive JPEG files FAT DOS formatted memory File names containing a dot character devices It is recommended that files to be played back in this unit are recorded under the following specifications lt MP3 gt Sampling frequency Constant bit rate lt JPEG gt Upper limit lt MPEG gt Playable codec Maximum size of a video Audio type 32kHz or 44 1kHz or 48
154. ty Except to icense as permitted in the SGI Free S O of this compliance with tl EXPRESS AND WITHOUT UM LIABILITY CO DAMAGES OF FOR EVEN IF SUCH DEATH OR PERSONAL APPLICABLE LAW PRO TRACT OR OTHERWISE SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT INDIRECT SPECIAL INCIDE ANY CHARACTER INCLUDING WITHOU LOSS OF GOODWILL WORK STOPPAGE LOSS OF OR MALFUNCTION ORANY AND ALL OTHER CO PARTY SHALL HAVE BEEN INFORMED OF TI DAMAGES THIS LIMITATION OF LIABILITY SHALL NJURY RESULTING FRO HIBITS SUCH LIMITATION SOME JURISDICTIONS ALLOW THE EXCLUSION OR LIMITATION OF DAMAGES SO THAT EXCLUSION AND LIMITATION MAY Indemnity Recipient shall be solely responsible for damages arising directly or indirect ICES NOR LEGAL THEORY NEGLIGENCE OR STRICT TAL OR CONSEQUENTIAL LIMITATION DAMAGES DATA COMPUTER FAILURE MERCIAL DAMAGES OR LOSSES OF SUCH OT APPLY TO LIABILITY SGI s NEGLIGENCETO THE EXTENT E DO INCIDENTAL OR CONSEQU OT APPLY TO RECIPIENT y out of its utilization of rights under this License Recipient will defend indemnify and hold harmless Silicon Graphics Inc from made by Recipient US Government End U and against any loss liabili the payment of reasonable attorneys fees arising out reproduction and distributi y damages costs or expenses including of Recipient s use modification ion of the Covered
155. umber or word e Ifyou select the wireless network name SSID has Wi Fi protected Setup WPS WPS setting screen will appearUse 4 4 to select a setting and then press OK Setting items Description Select this setting if your router has a Wi Fi Protected Setup WPS button Start scanning for wireless networks on the TV after pressing the WPS button on your router f connection test fails refer to the router s manual for more details Easy connect Select this setting if your router has Wi Fi Protected Setup WPS but does not have a WPS button Enter the 8 digit WPS PIN code shown on your TV in the router settings menu via PC before Connect is selected WPS code If your wireless network with authentication setting WERWPA PSK or WPA2 PSK WEP WPA Key entry screen will appear Enter the WEP WPA key of the selected wireless network using 4 w 4 then press OK Manual Clear Clear the entered number or word All clear Clear all the entered numbers or words a A Switch between abc ABC and Cancel Shows the cancellation display OK Set the entered number or word Confirmation message will appear Select Yes to complete the settings 3 Press MENU to exit m Note For a wireless network with authentication setting key icon appears to the right hand of the wireless network name SSID Signal icon shows the strength of the signal WEP WPA key
156. update You can update the software by using USB storage device 1 Ifthe TV is on press POWER at the side of the TV onnect your storage device with the update file to the 2 c your USB storage device with the update file to the USB port on the side of your TV Switch on the TV Press MENU on the remote control and then use 4 w 4 b to select Setup gt Software gt Software update gt USB Use a w to select the desired Update file Use a v to select Yes then press OK NO UT Aw Read the on screen instructions and confirm that you want to continue with the installation Software update is in progress Please wait Do not remove the USB storage device or turn the TV off while upgrade is in progress Update your TV with new software casa 8 When the software update is complete remove the USB storage device 9 Unplug the AC power cord for a few seconds from AC outlet and plug it again 10 switch on the TV L gt TheTV starts up with the new software The following messages are displayed without starting software update when it doesn t fulfill the update conditions Select a file No valid software file on the USB Che
157. ust alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the object code A program that contains no derivative of any portion of the Library but is designed to work with the Library by be
158. ved from this software without prior written permission For written BSD permission please contact openss core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL ap Copyright c 2003 2010 Jouni Malinen lt j w1 fi gt and contributors All Rights Reserved pear in their names without prior written permission of the OpenSSL Project Redistrib d 0 di for sth or with dificati ited 6 Redistributions of any form whatsoever must retain the following acknowledgment This distribution and use in source an PINA OT INS with or without modification are permitte product includes software developed by the OpenSSL Project for use in the OpenSSL provided that the following conditions are met Toolkit Http www openssl org 1 Redistributions of source code must retain the above copyright notice this list of conditions THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EX and the following disclaimer PRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBU TORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following di
159. vision provider you should consult any consumer information and manuals guides on closed captions for DTV programming provided by your subscription television provider ensure that the captioning function on your set top box if applicable is turned on and ensure that the captioning function on your DTV is turned on lf you are still unable to view closed captions on DTV programming you should contact your subscription television provider for assistance vf Selecting caption services T Select a caption service for analog channels Press MENU on the remote control and then use 4 w 4 b to select Setup gt Features gt Caption settings gt Caption service Use a v to select one of the listed caption services and press OK to confirm your choice 2 Press MENU to exit Note Not all caption services are used by a TV channel during the transmission of a closed caption program Summary of caption services Service Description CC 1 and T 1 are the primary caption and text services The captioning or text is displayed in the same language as the program s dialogue up to 4 lines of script on the TV screen where it does not obstruct relevant parts of the picture CC 3 and T 3 serve as the preferred data channels The captioning or text is often a secondary language CC 2 CC 4 T 2 are rarely available and broadcasters use them only in and T 4 special conditions such as when CC 1 and
160. wing fixed stationary con tent for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes e Product lost in shipment and no signature verification receipt can be provided e Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE Contact the Customer Care Center at 1 866 309 0841 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MER CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or consequential damages or all
161. y a picture in its original size Even if you select either Automatic or Wide screen in 16 9 video signal sidebars appear when the broadcasting station is transmitting up converted 4 3 analog video signal to be visible by digital broadcasting EN 23 English Using your TV as a PC monitor Use aVGA connector to connect a PC to your TV For sound add an audio cable with a stereo mini jack Caution Before you connect your PC set the PC monitor refresh rate to 60Hz Supported screen resolutions The following screen resolutions are supported in PC mode Resolution Refresh rate 640x480 60Hz 800x600 60Hz 024x768 60Hz 280x768 60Hz 360x768 60Hz 440x900 60Hz 280x1024 60Hz 400x1050 60Hz 680x1050 60Hz 920x1080 60Hz Changing sound settings 1 Press MENU on the remote contro and then use 4 w 4 b to select Setup gt Sound _Equalizer 2 Use a w 4 to highlight a sound setting and then press OK to select the setting 3 Adjust the following items The following sound settings can be configured Depending on the sound source some sound settings are not available Setting items Description Equalizer Adjust tone quality for each frequency Adjusts the balance of the right and left Balance ag N F speakers to best suit your listening position Available for digital channels only when Digital audi

Download Pdf Manuals

Related Search

Related Contents

SKF Maintenance and Lubrication Products  2627NB - Dehco  Buildings User Guide - Government of Ontario  ZyXEL PLA470 Series User's Manual  PFC/RR-91-3 SOLDESIGN USER`S MANUAL  

Copyright © All rights reserved. Failed to retrieve file