20151114 ~ FORBO-EUROCOL-NL ~ 543-eurosafe
Contents
1. eurocol 043 EUROSAFE DECO High quality adhesive for the installation of PVC strips and tiles Product Typification Basis Acrylic dispersion Colour Light blue Consistency liquid e Non flammable Roller castor chair resistant e Favourable spreading capacity e No grin through of adhesive trowel marks e Easy and safe to apply High final bond strength Performances Specific weight 1 04 kg l Consumption 100 150 g m on levelled subfloors Application For the installation of PVC strips and tiles on levelled subfloors Working Process Storage Store cool and free from frost Protect against high temperatures Tools Lambswool roller or brush Latency None Drying time 24 hours Shelf Life 12 months in unopened packaging Cleaner Water the strong connection eurocol The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances subfloor compositions and layer thickness Substrate e 543 Eurosafe Deco is suitable for any type of subfloor that has good tensile and compression strength The subfloor should also be even clean permanently dry and free from grease and dirt according to the requirements of BS 8203 or DIN 18 365 e Anhydrite floors should be sandpapered Thereafter make the floor dust free and prime with 044 Europrimer Multi This layer has to dry sufficiently Euroco2. l is part of the Forbo Group rodbo eurocol e Foran optimal final result apply a 2 mm levelling compound layer on the subfloor In advance always seek our technical data sheets In doubt about the application ask for technical advice the strong connection User manual Working conditions Required surrounding temperature 18 23 C Temperature for material and subfloor min 15 max 20 C Relative humidity 40 80 Directions for use It is very important to acclimatize the PVC material for at least 48 hours in the room where it will be installed Apply 543 Eurosafe Deco equally well covered in the recommended quantity with a lambswool roller or brush on the subfloor The strips or tiles can be placed directly into the wet semi moist or dry adhesive Drying time is depending on temperature relative humidity and the porosity of the subfloor After applying carefully roll and firmly rub the strips or tiles in to the adhesive line Drying time minimal 24 hours Remove fresh adhesive spots immediately with a clean damp cloth Underfloor heating systems 543 Eurosafe Deco can be applied on underfloor heating systems The startprotocol of the floorheating needs to be completly executed in accordance with the directives of the supplier Turn off the heater 24 hours before fixation Do not heat again until at least 24 hours after fixation in steps of maximum 5 C water temperature per day If there is the po
3. ssibility that he PVC strips or tiles can be warmer than 30 C also by sunlight you have to choose for a polyurethane bonding Environment and health Hazard Class None Safety and environment Safety data sheets of Forbo Eurocol products according to EEG guideline 91 155 MSDS Available on request Articles Article Definition Packaging EAN code 543 Eurosafe Deco 10 kg bucket 8 710345 543002 Eurocol is part of the Forbo Group RADO
Download Pdf Manuals
Related Search