OAP-54 Wireless ,Ai 8.5x
Contents
1. Minimum transmission power Transmission power reduction in software in 1 dB steps to min 0 5 dBm Reception sensitivity 2 4 GHz 802 11b 87 dBm 11 Mbps 94 dBm 1 Mbps Reception sensitivity 5 GHz 802 11a h 67 dBm 54 Mbps 87 dBm 6 Mbps Radio channels 2 4 GHz Up to 13 channels max 3 non overlapping 2 4 GHz band Radio channels 5 GHz Up to 26 non overlapping channels available channels and further obligations such as automatic DFS dynamic channel selection depending on national regulation Roaming Seamless handover between radio cells IAPP support with optional restriction to an ARF context IEEE 802 11d support WPA2 fast roaming Pre authentication and PMK caching for fast roaming Fast client roaming With background scanning moving LANCOM client mode access points pre authenticate to alternative access points which offer a better signal before Roaming fails VLAN VLAN ID definable per interface WLAN SSID point to point connection and routing context 4094 IDs IEEE 802 1q Dynamic VLAN assignment Dynamic VLAN assignment for target user groups based on MAC addresses BSSID or SSID by means of external RADIUS server Q in Q tagging Support of layered 802 1q VLANs double tagging Multi SSID Simultaneous use of up to 8 independent WLAN networks per WLAN interface IGMP snooping Support for Internet Group Management Protocol IGMP in the WLA2. m from the nearest power supply thanks to Power over Ethernet More flexibility With two integrated 108 Mbps wireless modules that comply with the WLAN standards IEEE 802 11a b g h the LANCOM OAP 54 Wireless can be operated in parallel in the 2 4 GHz and 5 GHz frequency bands This makes this access point ideal as a relay to extend point to point wireless connections or as a wireless connection end point that provides WLAN coverage to public spaces With one LAN and one WAN connector each and the integrated DSL router LANCOM OAP 54 also serves as a central firewall and Internet gateway and optionally as a VPN gateway for secured site coupling More Security LANCOM sets the standards in WLAN security A comprehensive range of security technologies is supported in wireless LAN including IEEE 802 11i 802 1x WPA WPA2 WEP64 128 152 access control lists or LEPS LANCOM Enhanced Passphrase Security which enables the configuration of an optimized solution whatever the individual requirements For example Multi SSID allows the definition of up to 8 user groups each with its own level of security The integrated firewall with the latest security functions such as stateful inspection intrusion prevention and denial of service protection will screen your network safely and reliably from external attack LANCOM routers and access points support VRRP Virtual Router Redundancy Protocol to assure high availability in case of hardware failure Ou
3. 61367 LANCOM WLC 4006 UK LANCOM WLAN Controller for central management of 6 or 12 LANCOM access points and WLAN routers item no 61368 for UK LANCOM WLC 4025 LANCOM WLAN Controller for central management of 25 opt up to 100 LANCOM access points and WLAN routers item no 61378 LANCOM OAP 54 Wireless Scope of features as of LCOS version 8 5x Accessories LANCOM WLC 4025 UK LANCOM WLAN Controller for central management of 25 opt up to 100 LANCOM access points and WLAN routers item no 61379 for UK LANCOM WLC 4100 LANCOM WLAN Controller for central management of 100 opt up to 1000 LANCOM access points and WLAN routers item no 61369 LANCOM WLC 4100 UK LANCOM WLAN Controller for central management of 100 opt up to 1000 LANCOM access points and WLAN routers item no 377 for UK Adapter rLancer Adapter NP NP 25 cm connector for external LANCOM outdoor antennas LANCOM item no 61346 External antenna rLancer Extender O 70 2 4 GHz outdoor antenna item no 60469 External antenna rLancer Extender O 9a 5 GHz outdoor antenna item no 61220 External antenna rLancer Extender O D80g 2 4 GHz dual linear polarisation diversity outdoor sector antenna item no 61221 External antenna rLancer Extender O D60a 5 GHz dual linear polarisation diversity outdoor sector antenna item no 61222 External antenna Antenna cable rLanc
4. PAC or PNS and plain Ethernet with or without DHCP RIP 1 RIP 2 VLAN IP 10 100 Mbps auto node hub PoE with supplied PoE Injector only WAN 10 100 Mbps auto node hub External antenna connectors Three reverse N connectors and three RP N to N adapter cables for external LANCOM AirLancer Extender antennas or for antennas from other vendors Please respect the restrictions which apply in your country when setting up an antenna system For information about calculating the correct antenna setup please refer to www lancom systems com LANCOM OAP 54 Wireless LCMS LANCOM Management System LANconfig Scope of features as of LCOS version 8 5x Configuration program for Microsoft Windows incl convenient Setup Wizards Optional group configuration simultaneous remote configuration and management of multiple devices over IP connection HTTPS HTTP TFTP A tree view of the setting pages like in WEBconfig provides quick access to all settings in the configuration window Password fields which optionally display the password in plain text and can generate complex passwords Configuration program properties per project or user Automatic storage of the current configuration before firmware updates Exchange of configuration files between similar devices e g for migrating existing configurations to new LANCOM products Detection and display of the LANCOM managed switches Extensive application help for LANconfig and
5. mail SNMP Traps and SYSLOG Authentication mechanisms EAP TLS EAP TTLS PEAP MS CHAP MS CHAPv2 as EAP authentication mechanisms PAP CHAP MS CHAP and MS CHAPv2 as PPP authentication mechanisms WLAN protocol filters Limitation of the allowed transfer protocols source and target addresses on the WLAN interface IP redirect High availability redundancy Fixed redirection of any packet received over the WLAN interface to a dedicated target address VRRP VRRP Virtual Router Redundancy Protocol for backup in case of failure of a device or remote station Enables passive standby groups or reciprocal backup between multiple active devices including load balancing and user definable backup priorities FirmSafe For completely safe software upgrades thanks to two stored firmware versions incl test mode for firmware updates Line monitoring Line monitoring with LCP echo monitoring dead peer detection and up to 4 addresses for end to end monitoring with ICMP polling LANCOM OAP 54 Wireless VPN IPSec optional Scope of features as of LCOS version 8 5x IPSec data encryption in combination with a LANCOM VPN Option only IPSec over HTTPS Enables IPsec VPN based on TCP at port 443 like HTTPS which can go through firewalls in networks where e g port 500 for IKE is blocked Suitable for client to site connections with LANCOM Advanced VPN Client 2 22 or later and site to site connections LANCOM
6. parameter help for device configuration LANCOM QuickFinder as search filter within LANconfig and device configurations that reduces the view to devices with matching properties LANmonitor Monitoring application for Microsoft Windows for remote surveillance and logging of the status of LANCOM devices and connections incl PING diagnosis and TRACE with filters and save to file Search function within TRACE tasks Wizards for standard diagnostics Export of diagnostic files for support purposes including bootlog sysinfo and device configuration without passwords Graphic display of key values marked with an icon in LANmonitor view over time as well as table for minimum maximum and average in a separate window e g for Rx Tx CPU load free memory Monitoring of the LANCOM managed switches Flick easily through different search results by LANCOM QuickFinder WLANmonitor Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations incl Rogue AP and Rogue Client visualization LANCOM QuickFinder as search filter that reduces the view to devices with matching properties Firwall GUI Graphical user interface for configuring the object oriented firewall in LANconfig Tabular presentation with symbols for rapid understanding of objects choice of symbols for objects objects for actions Quality of Service remote sites services default objects for common scenarios individual object def
7. 93 version 1 5 1 EN 302 502 BFWA Notifications Package content Certifications notified in Germany Belgium Netherlands Luxembourg Austria Switzerland UK Italy Spain France Portugal Czech Republic Denmark Manual Printed User Manual DE EN and Installation Guide DE EN FR ES IT PT NL CD DVD Data medium with firmware management software LANconfig LANmonitor WLANmonitor and documentation Cable Water resistant UV resistant Ethernet PoE cable with water resistant screw connector 15m Antennas Two 3 dBi dipole dualband antennas Power supply unit Via Power over Ethernet 1 x PoE Injector supplied Note Warranty Operates with the supplied PoE adapter only 3 years Support via Hotline and Internet KnowledgeBase Software updates VPN Regular free updates LCOS operating system and LANCOM Management System via Internet LANCOM VPN 25 Option 25 channels incl activated VPN hardware accelerator item no 60083 Advance Replacement LANCOM Next Business Day Service Extension OAP item no 61412 Warranty Extension LANCOM 2 Year Warranty Extension OAP item no 61415 Public Spot Accessories LANCOM WLC 4006 LANCOM Public Spot Option authentication and accounting software for hotspots incl Voucher printing through Standard PC printer Item no 60642 LANCOM WLAN Controller for central management of 6 or 12 LANCOM access points and WLAN routers item no
8. Background scanning Detection of rogue AP s and the channel information for all WLAN channels during normal AP operation The Background Scan Time Interval defines the time slots in which an AP or Router searches for a foreign WLAN network in its vicinity The time interval can be specified in either milliseconds seconds minutes hours or days Client detection Rogue WLAN client detection based on probe requests 802 1x supplicant Authentication of an access point in WLAN client mode at another access point via 802 1x EAP TLS EAP TTLS and PEAP Note The effective distances and transmission rates that can be achieved are depending of the site RF conditions LANCOM OAP 54 Wireless WLAN operating modes Scope of features as of LCOS version 8 5x WLAN access point Infrastructure mode autonomous operation or managed by LANCOM WLAN Controller WLAN bridge Point to multipoint connection of up to 7 Ethernet LANs mixed operation optional broken link detection blind mode supports VLAN When configuring Pt to Pt links pre configured names can be used as an alternative to MAC Adresses for creating a link Rapid spanning tree protocol to support redundant routes in Ethernet networks WLAN router Use of the LAN connector for simultaneous DSL over LAN IP router NAT Reverse NAT IP masquerading DHCP server DHCP client DHCP relay server DNS server PPPoE client incl Multi PPPoE PPTP client
9. LOG and firewall events monitor mode for Ethernet ports LANCOM WLAN Controller Supported by all LANCOM WLAN Controller separate optional hardware equipment for installation optimization operating and monitoring of WLAN networks except for P2P connections SYSINFO SYSINFO provides additional information Hash value for the current configuration time stamp of the last configuration change a persistent counter of the number of configuration changes and the output of the value CONFIG_STATUS Hardware Power supply Statistics Extensive Ethernet IP and DNS statistics SYSLOG error counter Accounting Connection time online time transfer volumes per station Snapshot function for regular read out of values at the end of a billing period Timed CRON command to reset all counters at once Export Accounting information exportable via LANmonitor and SYSLOG Via Power over Ethernet max distance between access point and injector 60 m 1 x PoE Injector supplied Environment 30 C to 65 C at 95 max humidity non condensing Housing 235 mm x 210 mm x 80 mm W x H x D 3 4 kg robust metal housing IP 66 protection rating ready for wall and pole mounting 6 LEDs for status display Power consumption max ca 25 Watt Note Declarations of conformity Operates with the supplied PoE adapter only CE EN 301 489 1 EN 301 489 17 EN 60950 2 4 GHz WLAN ETS 300 328 5 GHz WLAN EN 301 8
10. N bridge for WLAN SSIDs and LAN interfaces for specific switching of multicast packets devices with integrated WLAN only Automated detection of multicast groups Configurable action for multicast packets without registration Configuration of static multicast group members per VLAN ID Configuration of query simulation for multicast membership per VLAN ID Security IEEE 802 111 WPA2 with passphrase or 802 1x and hardware accelerated AES closed network WEP64 WEP128 WEP152 user authentication 802 1x EAP LEPS WPA1 TKIP RADIUS server Integrated RADIUS server for MAC address list management EAP server Integrated EAP server for authentication of 802 1x clients via EAP TLS EAP TTLS PEAP MSCHAP or MSCHAPv2 Quality of Service Prioritization according to Wireless Multimedia Extensions WME subset of IEEE 802 11e U APSD WMM Power Save Extension of power saving according to IEEE 802 11e by Unscheduled Automatic Power Save Delivery equivalent to WMM Power Save U APSD supports the automatic switch of clients to a doze mode Increasmed battery lifetime for telephone calls over VoWLAN Voice over WLAN Bandwidth limitation Maximum transmit and receive rates and an individual VLAN ID can be assigned to each WLAN client MAC address Broken link detection If the link of a chosen LAN interface breaks down a WLAN module can be deactivated to let the associated clients search for a new base station
11. PS Server Option to choose if an uploaded certificate or the default certificate is used by the HTTPS server Security Access rights read write over WAN or W LAN can be set up separately Telnet SSL SSH SNMP HTTPS HTTP access control list Scripting Scripting function for batch programming of all command line parameters and for transferring partial configurations irrespective of software versions and device types incl test mode for parameter changes Utilization of timed control CRON or connection establishment and termination to run scripts for automation Scripts can send e mails with various command line outputs as attachments LANCOM OAP 54 Wireless Management Scope of features as of LCOS version 8 5x Load commands LoadFirmware LoadConfig and LoadScript can be executed conditionally in case certain requirements are met For example the command LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new version is available In addition LoadFile allows the upload of files including certificates and secured PKCS 12 containers SNMP SNMP management via SNMPv2 private MIB exportable by WEBconfig MIB II Timed control Scheduled control of parameters and actions with CRON service Diagnosis Extensive LOG and TRACE options PING and TRACEROUTE for checking connections LANmonitor status display internal logging buffer for SYS
12. Power LAN WLAN1 WLAN2 WAN Message 0000o LANCOM OAP 54 Wireless Dual band outdoor access point for bridging large distances campus coverage or for establishing hotspots Outdoor dualband access point for 2 4 and 5 GHz operation Two integrated 54 108 Mbps wireless modules for simultaneous operations with IEEE 802 11a b g h Up to 4000 mW EIRP permitted transmission power in the 5 GHz band IP 66 housing with heating and cooling for 30 to 65 No problems installation even away from power supply points with Power over Ethernet Optional connection of external antennas Secure wireless LAN through IEEE 802 11i IEEE 802 1x EAP LEPS with AES encryption in hardware Secure Internet access via the integrated DSL router with stateful inspection firewall with intrusion detection denial of service protection Separation of user groups by Multi SSID and VLAN Optional VPN site coupling Hotspot support LANCOM Systems The outdoor access point LANCOM OAP 54 Wireless has an IP 66 housing which is resistant to strong water jets features integrated heating and cooling and can be sturdily mounted on walls or poles all of which makes it ideally suited for locations where the demands on stability and robustness are highest Be it in mountainous terrain or from roof to roof in the city the LANCOM OAP 54 Wireless can support stable high performance long serving WLANs in any environment It can be mounted easily flexibly and up to 60
13. S X 10 5 Intel only 10 6 or higher 10 licenses item no 61607 Note LANCOM OAP 54 Wireless The Polarization Diversity antennas require 2 cables and surge arrestors 61507 www lancom eu LANCOM Systems GmbH Adenauerstr 20 B2 52146 Wuerselen Deutschland E Mail info lancom eu Internet www lancom eu LANCOM Systems LANCOM LANCOM Systems and LCOS are registered trademarks All other names or descriptions used may be trademarks or registered trademarks of their owners Subject to change without notice No liability for technical errors and or omissions 05 11
14. VPN gateways or routers with LCOS 8 0 or later IPSec over HTTPS is based on the NCP VPN Path Finder technology Hardware accelerator optional Activated 3DES AES hardware encryption with the VPN 25 Option 1 Click VPN Client assistant One click function in LANconfig to create VPN client connections incl automatic profile creation for the LANCOM Advanced VPN Client 1 Click VPN Site to Site Creation of VPN connections between LANCOM routers via drag and drop in LANconfig IKE IPSec key exchange with Preshared Key or certificate Certificates X 509 digital multi level certificate support compatible with Microsoft Server Enterprise Server and OpenSSL upload of PKCS 12 files via HTTPS interface and LANconfig Simultaneous support of multiple certification authorities with the management of up to nine parallel certificate hierarchies as containers VPN 1 to VPN 9 Simplified addressing of individual certificates by the hierarchy s container name VPN 1 to VPN 9 Wildcards for certificate checks of parts of the identity in the subject Secure Key Storage protects a private key PKCS 12 from theft XAUTH XAUTH client for registering LANCOM routers and access points at XAUTH servers incl IKE config mode XAUTH server enables clients to register via XAUTH at LANCOM routers Connection of the XAUTH server to RADIUS servers provides the central authentication of VPN access with user name and password Authentication o
15. and server NetBIOS proxy DynDNS client NTP port mapping policy based routing based on routing tags tagging based on firewall rules dynamic routing with RIPv2 VRRP WLAN client Stateful inspection firewall Transparent WLAN client mode for wireless Ethernet extensions e g connecting PCs or printers by Ethernet up to 64 MAC addresses Automatic selection of a WLAN profile max 8 with individual access parameters depending on signal strength or priority Incoming Outgoing Traffic inspection based on connection information Trigger for firewall rules depending on backup status e g simplified rule sets for low bandwidth backup lines Limitation of the number of sessions per remote site ID Packet filter Check based on the header information of an IP packet IP or MAC source destination addresses source destination ports DiffServ attribute remote site dependant direction dependant bandwidth dependant Extended port forwarding Network Address Translation NAT based on protocol and WAN address i e to make internal webservers accessible from WAN N N IP address mapping N N IP address mapping for translation of IP addresses or entire networks Quality of Service Traffic shaping Tagging The firewall marks packets with routing tags e g for policy based routing Actions Forward drop reject block sender address close destination port disconnect Notification Via e mail SYSLOG or SNMP trap Dynam
16. ction Cluster of several LANCOM DHCP servers per context ARF network enables caching of all DNS assignments at each router DHCP forwarding to multiple redundant DHCP servers NetBIOS NetBIOS IP proxy NTP NTP client and SNTP server automatic adjustment for daylight saving time Policy based routing Policy based routing based on routing tags Based on firewall rules certain data types are marked for specific routing e g to particular remote sites or lines Dynamic routing Layer 2 functions ARP lookup LAN protocols IP Dynamic routing with RIPv2 Learning and propagating routes separate settings for LAN and WAN Extended RIPv2 including HopCount Poisoned Reverse Triggered Update for LAN acc to RFC 2453 and WAN acc to RFC 2091 as well as filter options for propagation of routes Definition of RIP sources with wildcards Packets sent in response to LCOS service requests e g for Telnet SSH SNTP SMTP HTTP S SNMP etc via Ethernet can be routed directly to the requesting station default or to a target determined by ARP lookup ARP proxy ARP BOOTP DHCP DNS HTTP HTTPS IP ICMP NTP SNTP NetBIOS PPPoE server RADIUS RIP 1 RIP 2 RTP SIP SNMP TCP TFTP UDP VRRP VLAN Rapid Spanning Tree WAN protocols Ethernet Interfaces LAN 802 1d Spanning Tree and 802 1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connections PPPoE Multi PPPoE ML PPP PPTP
17. er cable NJ NP 3m antenna cable extension for connection with LANCOM outdoor antennas item no 61230 Antenna cable rLancer cable NJ NP 6m antenna cable extension for connection with LANCOM outdoor antennas item no 61231 Antenna cable rLancer cable NJ NP 9m antenna cable extension for connection with LANCOM outdoor antennas item no 61232 Surge arrestor antenna cable rLancer Extender SA 5L surge arrestor 2 4 and 5 GHz to be integrated between Access Point and antenna item no 61553 Surge arrestor LAN cable 6 Ai Ai Ai Ai Ai AirLancer Extender 0 360ag dualband omnidirectional outdoor antenna item no 61223 Ai Ai Ai Ai Ai rLancer Extender SA LAN surge arrestor LAN cable item no 61213 Documentation LANCOM LCOS Reference Manual DE item no 61700 LAN cable outdoor LANCOM OAP 54 Ethernet cable 15m item no 61508 VPN Client Software LANCOM Advanced VPN Client for Windows XP Windows Vista Windows 7 single license item no 61600 VPN Client Software LANCOM Advanced VPN Client for Windows XP Windows Vista Windows 7 10 licenses item no 61601 VPN Client Software LANCOM Advanced VPN Client for Windows XP Windows Vista Windows 7 25 licenses item no 61602 VPN Client Software LANCOM Advanced VPN Client for Mac OS X 10 5 Intel only 10 6 or higher single license item no 61606 VPN Client Software LANCOM Advanced VPN Client for Mac O
18. f VPN client access via XAUTH and RADIUS connection additionally by OTP token Algorithms 3DES 168 bit AES 128 192 or 256 bit Blowfish 128 bit RSA 128 or 448 bit and CAST 128 bit OpenSSL implementation with FIPS 140 certified algorithms MD 5 or SHA 1 hashes NAT Traversal NAT Traversal NAT T support for VPN over routes without VPN passthrough IPCOMP VPN data compression based on LZS or Deflate compression for higher IPSec throughput Dynamic DNS Enables the registration of IP addresses with a Dynamic DNS provider in the case that fixed IP addresses are not used for the VPN connection Specific DNS forwarding Routing functions Router DNS forwarding according to DNS domain e g internal names are translated by proprietary DNS servers in the VPN External names are translated by Internet DNS servers IP and NetBIOS IP multi protocol router Advanced Routing and Forwarding Separate processing of 8 contexts due to virtualization of the routers Mapping to VLANs and complete independent management and configuration of IP networks in the device i e individual settings for DHCP DNS Firewalling QoS VLAN Routing etc Automatic learning of routing tags for ARF contexts from the routing table HTTP HTTP and HTTPS server for configuration by web interface DNS DNS client DNS server DNS relay DNS proxy and dynamic DNS client DHCP DHCP client DHCP relay and DHCP server with autodete
19. hts Individual access and function rights for up to 16 administrators Alternative access control on a per parameter basis with TACACS User administration RADIUS user administration for dial in access PPP PPTP Support for RADSEC Secure RADIUS providing secure communication with RADIUS servers Remote maintenance Remote configuration with Telnet SSL SSH with password or public key browser HTTP HTTPS TFTP or SNMP firmware upload via HTTP HTTPS or TFTP TACACS Support of TACACS protocol for authentication authorization and accounting AAA with reliable connections and encrypted payload Authentication and authorization are separated completely LANCOM access rights are converted to TACACS levels With TACACS access can be granted per parameter path command or functionality for LANconfig WEBconfig or Telnet SSH Each access and all changes of configuration are logged Access verification and logging of SNMP Get and Set requests WEBconfig supports the access rights of TACACS and choice of TACACS server at login LANconfig provides a device login with the TACACS request conveyed by the addressed device Authorization to execute scripts and each command within them by checking the TACACS server s database CRON action table and script processing can be diverted to avoid TACACS to relieve TACACS servers Redundancy by setting several alternative TACACS servers Configurable option to fall back to local user accoun
20. ic bandwidth management with IP traffic shaping Bandwidth reservation Dynamic reservation of minimum and maximum bandwidths totally or connection based separate settings for send and receive directions Setting relative bandwidth limits for QoS in percent DiffServ TOS Priority queuing of packets based on DiffServ TOS fields Packet size control Automatic packet size control by fragmentation or Path Maximum Transmission Unit PMTU adjustment Layer 2 Layer 3 tagging Security Intrusion Prevention Automatic or fixed translation of layer 2 priority information 802 11p marked Ethernet frames to layer 3 DiffServ attributes in routing mode Translation from layer 3 to layer 2 with automatic recognition of 802 1p support in the destination device Monitoring and blocking of login attempts and port scans IP spoofing Source IP address check on all interfaces only IP addresses belonging to the defined IP networks are allowed Access control lists Filtering of IP or MAC addresses and preset protocols for configuration access Denial of Service protection Protection from fragmentation errors and SYN flooding General Detailed settings for handling reassembly PING stealth mode and AUTH port URL blocker Filtering of unwanted URLs based on DNS hitlists and wildcard filters Password protection Password protected configuration access can be set for each interface Alerts Alerts via e
21. inition e g for user groups Automatic software update WEBconfig Voluntary automatic updates for LCMS Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server myLANCOM account mandatory Updates can be applied directly after the download or at a later time Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP Similar to LANconfig with a system overview syslog and events display symbols in the menu tree quick access with side tabs WEBconfig also features Wizards for basic configuration security Internet access LAN LAN coupling Online help for parameters in LCOS menu tree Alternative boot configuration During rollout devices can be preset with project or customer specific settings Up to two boot and reset persistent memory spaces can store customized configurations for customer specific standard settings memory space 1 or as a rollout configuration memory space 2 A further option is the storage of a persistent standard certificate for the authentication of connections during rollouts Device Syslog Syslog buffer in the RAM size depending on device memory to store events for diagnosis Default set of rules for the event protocol in Syslog The rules can be modified by the administrator Display and saving of internal Syslog buffer events from LANCOM devices with LANmonitor display only with WEBconfig Access rig
22. nd 5150 5825 MHz depending on country specific restrictions Data rates 802 11b g 54 Mbps to IEEE 802 11g fallback to 48 36 24 18 12 9 6 Mbps Automatic Rate Selection compatible to IEEE 802 11b 11 5 5 2 1 Mbps Automatic Rate Selection 802 11 b g compatibility mode or pure g or pure b Super A G with Turbo Mode 108 Mbps bursting compression Data rates 802 11a h 54 Mbps to IEEE 802 11a h fallback to 48 36 24 18 12 9 6 Mbps Automatic Rate Selection Super A G with Turbo Mode 108 Mbps bursting compression fully compatible with TPC adjustable power output and DFS automatic channel selection radar detection according to ETSI EN 301 893 V 1 5 1 Range outdoor P2P More than 20 km in 5 GHz See our LANCOM Antenna Distance Calculator under www lancom de Output power at radio module 2 4 GHz 802 11b 19 dBm 1 and 2 Mbps 19 dBm 5 5 and 11 Mbps 802 119 19 dBm 6 Mbps 14 dBm 54 Mbps Output power at radio module 5 GHz 802 1 1a h 18 dBm 6 Mbps 12 dBm 54 Mbps with transmission power control TPC and manual power settings Max radiated power EIRP 2 4 GHz band 802 11b g Up to 20 dBm 100 mW EIRP transmission power control according to TPC Max radiated power EIRP 5 GHz band 802 1 1a h Up to 30 dBm 1000 mW or up to 36 dBm 4000 mW EIRP depending on national regulation on channel usage and subject to further obligations such as TPC and DFS
23. ts in case of connection drops to the TACACS servers Compatibility mode to support several free TACACS implementations Remote maintenance of 3rd party devices A remote configuration for devices behind der LANCOM can be accomplished after authentication via tunneling of arbitrary TCP based protocols e g for HTTP S remote maintenance of VoIP phones or printers of the LAN Additionally SSH and Telnet client allow to access other devices from a LANCOM device with an interface to the target subnet if the LANCOM device can be reached at its command line interface TFTP amp HTTP S client For downloading firmware and configuration files from a TFTP HTTP or HTTPS server with variable file names wildcards for name MAC IP address serial number e g for roll out management Commands for live Telnet session scripts or CRON jobs HTTPS Client authentication possible by username and password or by certificate SSH amp Telnet client SSH client function compatible to Open SSH under Linux and Unix operating systems for accessing third party components from a LANCOM router Also usable when working with SSH to login to the LANCOM device Support for certificate and password based authentication Generates its own key with sshkeygen SSH client functions are restricted to administrators with appropriate rights Telnet client function to login administer third party devices or other LANCOM devices from command line interface HTT
24. tstandingly flexible backup solutions can be realized simply by adding in alternative devices which can be from any vendor as the technology is non proprietary Professional management LANCOM s WLAN management tools offer real benefits to network administrators for the installation control and monitoring of access points Supplied with the product LANmonitor helps to optimize the alignment of point to point links aids diagnosis and offers network monitoring LANCOM WLANmonitor gives you a complete overview of all WLAN networks and clients within range LANconfig has convenient functions for the remote configuration of APs individually or in groups and it has functions for managing large scale projects More Reliability for the Future From the very start LANCOM products are designed for a product life of several years They are equipped with hardware dimensioned for the future Even reaching back to older product generations updates to the LANCOM Operating System LCOS are available several times a year free of charge and offering major features LANCOM offers unbeatable protection of your investment What s more To complete the WLAN portfolio LANCOM also offers suitable AirLancer client adapters and a large selection of high end antennas for professional indoor and outdoor applications LANCOM OAP 54 Wireless Scope of features as of LCOS version 8 5x WLAN Frequency band 2 4 GHz and 5 GHz 2400 2483 5 MHz ISM a
Download Pdf Manuals
Related Search