www.Jameco.com 1-800-831-4242 Jameco Part Number 211668
Contents
1. Distributed by AM ECO www Jameco com 1 800 831 4242 The content and copyrights of the attached ELECTRONICS material are the property of its owner Jameco Part Number 211668 User s Manual EXTECH User Guide INSTRUMENTS Resistance Decade Box Model 380400 Introduction 2M 200K 20K 2K 200 E E Congratulations on your purchase of the Extech 380400 Resistance Decade Box This device offers 7 decades of resistance ranges from 1 to over 11MQ in 1Q steps Slide switches allow easy addition and subtraction of resistance values Binding posts 3 offer simple and secure connections Careful use of Bee gE this decade box will provide years of reliable service Specifications P 700K 40k d i 70 Resistance ranges 1 to 11 111 110Q in 19 steps Sa ah a aches ap OUT Ohms Internal Resistance 0 30 Resistance Decade Box Power 0 3W Resistors Connection Three 3 binding posts Accuracy 1 Operating conditions Temperature 32 to 122 F 0 to 50 C Humidity lt 80 RH Dimensions Weight 5 79 x 4 61 x 1 3 14 7 x 11 7 x 3 3cm Approx 0 69 Ibs 312g Operation Binding Post Connections The binding posts can be used for connections in several ways 1 A banana plug can be inserted directly into the posts 2 Bare wire can be threaded through the post after it has been unscrewed Once the bare wire is threaded tighten the posts as necessary 3 Alligator clip2. s can be used but use caution not to strip the post threads or plastic post housing The resistance output is available on the RED and the BLACK binding posts The WHITE post is case ground and is typically not used Connect the positive lead of the device under test to the RED post Connect the negative lead to the BLACK post Use the WHITE grounding post only if the device under test will be grounded to the 380400 case Range Selection The 28 front panel switches are used to select the resistance that will be available on the RED and BLACK terminals When a switch is set to the IN position the value printed above the switch is added to the total resistance available at the posts When the switch is set to OUT it is excluded from the total resistance If all of the switches are set to OUT the total output resistance is zero 0 3Q internal resistance approx For example if the desired output value is 10 5KQ set the following switches to the IN position 10K 400Q and 100Q Testing This device can be used to verify the calibration integrity of MultiMeters LCR meters Calibrators etc Connect as described above in the Binding Post Connection section Set the resistance switches to output the desired resistance Ensure that the voltage supplied by the device under test does not overload the 0 3W internal resistor power rating The device under test should read the value of resistance selected on the tester If it does not the device under te
3. st may need calibration adjustment or repair Calibration and Repair Services Extech offers complete repair and calibration services for all of the products we sell For periodic calibration NIST certification on most products or repair of any Extech product call customer service for details on services available Extech recommends that calibration be performed on an annual basis to ensure calibration integrity Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment a six month limited warranty applies on sensors and cables If it should become necessary to return the instrument for service during or beyond the warranty period contact the Customer Service Department at 781 890 7440 ext 210 for authorization or visit our website at www extech com click on Contact Extech and go to Service Department to request an RA number A Return Authorization RA number must be issued before any product is returned to Extech The sender is responsible for shipping charges freight insurance and proper packaging to prevent damage in transit This warranty does not apply to defects resulting from action of the user such as misuse improper wiring operation outside of specification improper maintenance or repair or unauthorized modification Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and
4. will not be liable for any direct indirect incidental or consequential damages Extech s total liability is limited to repair or replacement of the product The warranty set forth above is inclusive and no other warranty whether written or oral is expressed or implied Copyright 2002 Extech Instruments Corporation All rights reserved including the right of reproduction in whole or in part in any form Model 380400 Version 1 1 August 2002
Download Pdf Manuals
Related Search