Sofia - Quick Guide
Contents
1. FOSS Infratec Sofia User Defined Fields User Defined Fields allow additional information to be attached to a sample to be analysed 1 If available a list of UDFs are displayed 2 Use arrow keys to highlight the correct UDF and press Select Use arrow keys to highlight the correct value or sample description Press Select 4 Repeat steps 2 3 to attach additional information to the sample Press the key to continue analyzing the sample or Press Back to return to the Analyze view Press Clear All to remove all selected UDF s and values for the sample to be analysed Previously selected UDFs will remain as default values for new analyses until changed or cleared Quick Guide 6002 5351 Rev 3 Infratec Sofia 6002 5351 Rev 3 Please read safety precautions and warranty statement in the User Manual prior to use Before operating the instrument ensure that the instrument and all external equipment are installed and connected according to the User Manual Note that your installation may differ from the one described Copyright 2008 All rights reserved FOSS Analytical AB Box 70 SE 263 21 Hoganas Sweden Tel Int 46 42 361500 Fax 46 42 340349 E mail info foss dk FOSS Touch Screen Display Caution The embedded software is presented on a colour touch screen display Do not move the sample handling wheel SHW under any A circumstances when the power supply is connected to the FOSS instrume2. nt This will damage the motor connected to the SHW When the instrument is ready for analysis the Analyze view will be automatically displayed The check cell is the default product Analyse the check cell only when prompted Analysis Procedure Select the correct grain product Press Grain Use arrow keys to select the grain product Press Select Pour the sample up to 0 4 1 into the hopper 3 Press the key Register additional information to the sample with User Defined Fields UDFs optional See next page Press the key again It takes approximately 3 minutes to complete Fig 1 1 Keypad an analysis F1 F2 F3 F4 When the analysis is completed the sample is automatically emptied from the SHW into the drawer and the result is displayed l Automatically adjusts display settings according to ambient 1 Ambient light sensor lighting conditions 2 On Off LED Indicates if power source connected to instrument 3 Analysis LED Indicates if analysis sequence has been initiated Repeat steps 2 6 to analyse additional samples of the same grain type 5 Cancel key Cancels an analysis or function action 6 Arrow keys Scroll up and down the contents of a list Soft keys F1 F2 F3 and F4 Function indicated on instrument screen Quick Guide 6002 5351 Rev 3 Quick Guide 6002 5351 Rev 3 4 Analyse key Initiates an analysis
Download Pdf Manuals
Related Search