HURRICANE DEEP BLUE
Contents
1. All the Data optionally used The values in this option should be 5 on the upper bar and 4 on the lower bar After the above adjustments you should carefully examine the object in the graph You should pay attention to some significant features of the metal objects and gaps in the graph during the analysis To do this you may use the Image Quality Interpolate button in the program When you click this button you tf should select 3 as average value or you can do 3 or 4 times with the 1 option With the Image Quality Interpolate option you can understand if the object in the graph is metal or mineral and confirm the gap data If you use this option and conduct the analysis accurately you will be mistaken less After these settings examine the graph in the light of the following information It may be hard to discriminate between the metal and mineral at first sight In some measures you may get the minerals in reddish However there are some differences between metal and mineral and this analysis reveals these differences Some of these differences are as follows If the graph represents a certain shape it is the metal data such as square rectangle and circle If there is orange and yellow toning surrounding the object in the graph this is probably the mineral data If the depth of the object is 10 cm or 30 cm in the measures it is more likely to be mineral In the control measures conducted again you should2. observed that the metal data creates a TOP and DOWN structure The feature should be regarded in the metal and gap data The mineral does not include this feature The metal and gap take up space as a mass in the graph TORA TORA www toratorashop net toratora1 libero it 00390438842829 Page 7 You can confirm the data by using the Image Quality Interpolate button in the program When you click this button you should select 3 as average value or you can do 3 or 4 times with the 1 option With the Image Quality Interpolate option you can understand if the object in the graph is metal or mineral and confirm the gap data If you use this option and conduct the analysis accurately you will be mistaken less The object maintains its position before using the image quality scale and after using the image quality scale in the metal and gap data The object not only loses its previous position but also scatters the graph in the mineral data The position of the graph should be same after using the image quality scale the graph should not be scattered and the structure should not be ruined In the following graph the before and after images are shown The Graph before the use of The Image Quality The Graph after the use of The Image Quality Scale Interpolate Scale interpolate When you consider all the features mentioned above you can understand if the object is real or not In brief to understand if the object i
3. obtain and confirm the same data Metal and mineral images are exemplified in the following graph TORA TORA www toratorashop net toratoral libero it 00390438842829 Page 5 The differences among metal gap and mineral are explained in the following table The features in the table are exemplified in the graph Please examine meticulously METAL CAVITY MINERAL A certain shape A certain shape No certain shape scattered in the graph Top down structure in graph Top down structure in graph No top down structure in graph Red in graph Dark Blue in graph Orange in graph The graph continues apparently The graph continues apparently The graph is usually superficial no downwards levels at the bottom downwards levels at the bottom levels Blue reflection in graph Green reflection in graph No reflection in graph Metal data Mineral data METAL GRAPH The following sample graph is precious metal data inside the gap which is created for testing by the user The information about the analysis of the metals in a square metal box is given The real metal objects represent a certain shape The shapes are the most significant features that separate the metal from the mineral In the side graph the metal in a gap is so displayed and it is square There is a yellow layer of metalaround The thin yellow layer surrounding the red yellow layer should square and this should be in all the m p eu metal data The yellow layer sh
4. there is a THIN LIGHT BLUE layer similar to the BLUE lines like the thin yellow layer in the metal Besides the north south magnetic pole of the gap has GREEN reflection There is a room view in the side graph As explained above there is a LIGHT BLUE line specifying the lines of the gap It creates a TOP and DOWN structure The graph continues downwards cavitation In this graph there is also a room view It is seen in the green lines the reflection of the gap in the left part TORA TORA www toratorashop net toratoral libero it 00390438842829 Page 9 The gap data is similar to the data of the metal objects They have the same features While there is a thin yellow layer surrounding the metal object there is a thin light blue layer surrounding the gap data While the reflection of the metal is blue the reflection of the gap data is green The gap can be defined with the depth width and height in the gap data such as tomb room and tunnel It is not necessary to explain in detail because the metal data is explained in detail and the gap data has the same features Please contact our experts for the subjects you require more information THE DEPTH MEASURE IN GRAPH In order to measure the depth in the graph the data of the object you scan should be at the center of the graph If there is data at the sides you should conduct control scan after centering these In the depth measures there is error margin at the least
5. HURRICANE DEEP BLUE 3D GROUND MONITORING USER S MANUAL AND GRAPH ANALYSIS TORA TORA www toratorashop net toratoral libero it 00390438842829 Page 1 Dear customer thank you for preferring the Hurricane EM products We request you to carefully read this user s manual prepared for the detailed use and analysis of the 3D Ground Monitoring and used for the analysis of the data obtained with Hurricane EM Systems 3D Ground Monitoring program is used in integration with the Conrad EM system products It enables the transformation of the numeric data obtained from the EM system products into graphs and 2D and 3D analysis Fic O Z Oig w 4 1 System Requirements The minimum system requirements for the 3D Ground Monitoring software to be installed in your computer are specified in the following table Operating System Memory RAM Graphics Card Disk Space 00 Data Transfer Interfa a e Windows Xp Windows 7 Windows amp ve teseeseeseeseees Min 64 MB OpenGL Compatible 0 Min 100 MB CO EEEE E ek way Seneca etn HO A IZ 2 Menu and the Buttons The Splash Screen of the program is as follows The definitions of the menu part and the buttons in the program are explained below a1 3D Ground Monitoring Dosya 8 amp Bwu 12 e e e g F amp O P Natir Yap 100 v Fs Fe F7 8t gt T 4 Open Save Save s Export as BMP Int
6. can for big objects tomb room and big objects you can increase the signal beat range 50 cm between each signal If you scan for small objects you should maintain the signal beat range closer such as 20 cm 30 cm Measures in north and south axis enable you to obtain more reliable data You should consider this as far as possible The shape of the object you scan for for example square metal box must be the same in the graph The longer a buried object lies underground the more the magnetic field it creates and the easier it is detected You should check by scanning in the same way at least twice The extra measures enable you to eliminate the minerals and the errors if any In the measures the object or the gap data should be in the middle of the graph If the metal or gap data is near the edge in the graph you should re measure by centering this data During the scan you should check the battery and charge of your product You should scan with fully charged product Low battery level is one of the factors affecting your measures You should conduct the graph analysis in the light of this information In the following information metal mineral distinction and the analysis of metal and gap data are exemplified TORA TORA www toratorashop net toratoral libero it 00390438842829 Page 4 4 1 INITIAL EVALUATION OF THE MEASURES CARRY OUT THE FOLLOWING STEPS TO BEGIN THE ANALYSIS OF THE MEASURES The M
7. eaning of the Colors in the Graph Red Metal Blue Cavity Green Soil Orange and Yellow Mineral Carry out the following steps in turn for the analysis of the measures The explanations in the examples will provide information about the analysis of the graph First of all you should use the button FS F F7 F in order to make the lines of the metal and gap data apparent in the graph Make the lines of the metal data apparent by clicking the F7 button once in turn Then make the lines of the gap data apparent by clicking the F6 button once When you click once the graph colors should be apparently the blue or the red You should not use this buttons more than once or twice otherwise the mineral data also becomes red and is mistaken for the metal The F8 button enables you to undo the changes in the metal data and the F5 button enables you to undo the changes in the gap data If you shake the device or there are any factors causing magnetic field pollution such as base station energy lines and if you think you have made a mistake you should use the signal correction button If pF there are no factors affecting your work in the field of scan it should be Correct only the Data Under the Determination Line to confirm the accuracy of your graph If there are no changes in the graph it means that there are no mistakes in the data obtained If there are any factors affecting the work in the field of scan you should use the Correct
8. erpolate Strg l Signal Correction Strg C Characteristics F9 Preferences F10 Exit Figure 3 Program Main Screen Figure 4 Folder Menu and Settings TORA TORA www toratorashop net toratora1 libero it 00390438842829 Page 2 h New Project Button enables you to create a new project Open Folder button enables you to open the stored folders Oo Save button enables you to save the new project e eolo It enables you to separately analyze the Gap Soil and Metal data It is used to calculate the Graph size Each frame is equal to 30 cm Er It enables the bird s eye view of the graph It enables the up and down movement of the depth line gt Image Quality Button enables you to increase the graphic quality and confirm the graph values Signal Edit button enables the edit of the faulty signals O Zoom buttons enabling the adjustment of the graph size Neutral a Menu of the soil type selection Fs Fe F7 F The inquiry buttons used for the inquiry of the metal and gap data aa aa The direction buttons enabling you to move the graph on the screen f Paralel Say se 1 Sinyal Say s 1 Derinlik 0 00 m The bottom bar displaying the number scan line order and depth of signals TORA TORA www toratorashop net toratora1 libero it 00390438842829 Page 3 With the new project button it enables you to create a new study You can create a new project by specifying the co
9. ine in the graph the depth line will move downwards The exact Derinlik cizgisini gag METET is displayed numerically in the bar Depth showing oo the depth at the bottom in the program When you come derinlik l m alabilirsiniz to the edge of the object the point where the color red starts you will reach the top of the buried object When you move the depth line to the bottom of the object you will learn the total measures of the object In order to understand the position of the object you should use the NET VIEW button in the program When you click the button the graph will be displayed as small squares You can move with the right left up down direction buttons on the keyboard on the squares in the net view You must count each square while moving to the center of the object with the direction buttons The direction line moving at the right enables you to learn row and the direction line moving at the bottom enables you to learn the signal number in order Examining the graph with net view You can learn the row and number in order of the object in the net view LIVE SCAN The Live Scan option is optionally presented in a few models If your product has live scan feature you can use this feature in the software For the live scan in the software you should select Menu New Project Device Ultrasound scan and the scan type should be live scan Horizontal exploration You cannot record the Live Scan i
10. like 0 50 cm In order to minimize the errors you have to know the type of the soil that you measure You have to select the type of the soil in the soil option menu in the software z Soil Type Option Menu If you do not know the soil type of the field of scan exactly you should conduct depth calculation before saving the graph data you obtained in the program Stop the incoming data inflow in your device and conduct the necessary analysis such as metal confirmation by using the F6 and F7 inquires and Image Quality Scale Interpolate Select the bird s eye view after the analysis With the left right up down direction button on your keyboard center the depth measure lines to the object on the screen You can see the depth in the depth bar indicator at the bottom As is seen in the side graph when you center the direction lines to the object the depth measure is displayed in the bar depth at the bottom You can obtain the depth with the measure in the unknown soils Derinlik 0 00 m 3 30 m 255 TORA TORA www toratorashop net toratoral libero it 00390438842829 Page 10 The Detailed Depth Measure of the Object To get the detailed depth measure of the object in the graph use the down button for the depth line in the program with the side view of the graph By using the up down depth button you can get the total measure between the top down structures of the object 4 When you use the down button for the depth l
11. mage The graph constantly flows on the screen and is renewed The color red represents metal the color blue represents gap and the color green represents soil in the Live Scan Conduct a detailed graph analysis in the Ground Scan Normal Ground Scan with the pre graph information you obtain here TORA TORA www toratorashop net toratora1 libero it 00390438842829 Page 11 ie eve Ov aeeeSesi te a Live Scan Simultaneous live scan feature is optionally presented in some models The side graph displays the Live Scan Paralel Say s 0 00 m Sinyal Say s 0 00 m Derinlik 0 00 m 0 01 m All rights reserved to Tora Tora Company The unauthorized distribution copy and amendment are forbidden Please contact our authorized personnel for the detailed information about the analysis and graph interpretations TORA TORA www toratorashop net toratora1 libero it 00390438842829 Page 12
12. mpatible model port Measure equipment EP ili transfer type signal beat number and mode of operation for your device eens cous z and evaluate You can find the information about the data transfer in the Transfer Method Bluetooth use r s manua I O f your device Number of Impulses 10 ka Operating Mode Ground Scan OK Cancel The function and use of the buttons will be discussed in detail during the evaluation of the analysis and measures In this part there is brief information about the functions of the buttons 3 THE GRAPH ANALYSIS AND THE EVALUATION OF THE MEASURES Before the measures you must have information about what you scan gap water or metal and the field where you scan The mistakes in the measures will cause different graphs In order to eliminate the mistakes and get the accurate data in the measures please read the following articles carefully You should have information about the field where the scan is conducted You should consider the information such as historical background and the structure of the soil of the field of scan If there is an energy line in the field of scan this will cause you to be mistaken in the data You should scan at least 50 meters away of the factors that can affect the scan such as the energy lines During the scan in an unknown field wide measures should generally be conducted For example the scan should be conducted as 20 signals and 20 lines If you s
13. ould shape of the red object be in the same shape of the red object The real metal objects represent a certain shape square rectangle circle TORA TORA www toratorashop net toratoral libero it 00390438842829 Page 6 a 3D Ground Monitoring m9 3gm When the metal inquiry is conducted with F7 and the gap inquiry with F6 in the program there should be BLUE reflection There should be BLUE representing the metal object the data is reflection representing the metal object obtained with the north and south magnetic pole in the values obtained There are no reflections in the minerals File a oja 2 elele mt zte tce phony Ez s re m ore Metal data and gap data continue downwards in the graph The bottom of the metal and gap data always ie creates a level in the graph Scan Line 1 Impulse 1 Depth 0 00 m 0 00 m When the 3 dimension view of the examples above is examined the metal data and gap data continue downwards in the graph In a simpler explanation cavitation occurs The bottom of the metal and gap data always creates a level in the graph The mineral data creates a pointy part in the bottom instead of a level If there is a pointy part at the bottom of the graph it is the mineral data Metal and Cavity in data TOP and DOWN structure should be When the analysis of the metal data is conducted in the side graph Cavity data and soil data are removed it is
14. s metal data there should be cavitation in the graph namely the graph should continue downwards metal objects have blue reflection there must be a certain shape in the graph there is a thin yellow layer surrounding the object and the position should be the same after the use of the image quality scale In order to make a distinction between the precious metal and the worthless metal you have to use the image quality scale The precious metal and the worthless metal have the same features in the graph reflection cavitation thin yellow layer top down structure However it is possible to make a distinction between the precious metal and the worthless metal by using the image quality scale interpolate If the red object turns orange and has more orange around when the image quality scale is used then it is worthless metal The precious metal maintains the color red and has only thin yellow layer surrounding itself TORA TORA www toratorashop net toratoral libero it 00390438842829 Page 8 The precious metal after the use of image The worthless metal after the use of image quality scale quality scale CAVITY DATA GRAPH All the features explained up until this point are the features of the metal data The cavity data has the same features The gaps data also continues downwards cavitation and has top down structure However the color of the gap such as room tomb and tunnel is BLUE When the graph is examined
Download Pdf Manuals
Related Search