Home

owner`s manual

1. NOTE Standard dimensions for wall mount kits are shown in the table below Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided Do not use screws that do not comply with VESA standard screw specifications Do not use screws that are longer than the standard length or do not comply with VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the TV at more than a 15 degree tilt Always have two people mount the TV on to a wall 400 X 400 PDP TV 600 X 400 4 Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury from electric shock Assembling the Cable manager ECO Sensor and Screen Brightness Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption This causes
2. Plasma Iv user manual Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model serial No 2 If you have any questions please call us at 1 800 SAMSUNG 1 800 726 7864 for assistance CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol indicates that important literature concerning operation and maintenance has been included with this product The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation To ensure reliable operation of this apparatus and to protect it from overheating these slots and openings must never be blocked or covered Do not place this apparatus in a confined space such as a bookcase or built in cabinet unless proper ventilation is provided Do not place this apparatus near or over a radiator or heat register or where it is exposed to direct sunlight Do not place vessels vases etc containing water on this apparatus as this can result in a fire or electric shock Do not expose this apparatus to rain or place it near water
3. Avis NMB 003 Classe B This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada VCCI Class A Notice OXigBli 22AA tEREMRECT TORE TzERERIC BRc4AQmEWmESGSeEsEC C6DAeUSA4 012 amp l zI i fh FH SUI xseid542Xxcm cA eUzssij VCCI Class B Notice TOE 22AB T ikixikBEBCS TORE ZEAR C BRdS5 c tBHH LCUxSd2X o0mEB S274o0TL5LEUELa siREWILXELC BAS c iae eseatucd cmd AYRE AAS IX GED CIELUMRUSRURELCT SUN CCC Class A notice China HEIAN E m CERIMER ike GA RES RATE IR ARES ESR POSLECTE RPY RATA BSMI Class A Notice The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance label Sale joe Fired CER ERE RE HIE Bee NPE COS RTL Pc EHA EREE KRE BST EAS o BSMI Class A Notice Products with the CE marking comply with the EMC Directive 2004 108 EC and the Low Voltage v Directive 2006 95 EC issued by the Commission of the European Community Compliance with these directives implies conformity to the following European Norms EN55022 Radio Frequency Interference EN55024 Electromagnetic Immunity of Information Technology Equipment EN61000 3 2 Power Line Harmonics EN61000 3 3 Voltage Fluctuations EN55013 Radio disturbance characteristics of broadcast receivers and associated equipments EN55020 Electromagnetic
4. Do not allow children to hang onto the product Store the accessories battery etc in a location safely out of the reach of children Do not install the product in an unstable location such as a shaky self a slanted floor or a location exposed to vibration Do not drop or apply any shock to the product If the product is damaged disconnect the power cord and contact a service center To clean this apparatus unplug the power cord from the wall outlet and wipe the product using a soft dry cloth Do not use any chemicals such as wax benzene alcohol thinners insecticide air fresheners lubricants or detergent These chemicals can damage the appearance of the TV or erase the printing on the product Do not expose this apparatus to dripping or splashing Do not dispose of batteries in fire Do not short circuit disassemble or overheat the batteries There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery Replace only with the same or equivalent type WARNING TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES Contents Basic Features 5 Using the Smart Touch Control O Connecting to the TV ee Sud di vu Noir T LN jo PME O Inserting the Batteries AAA X 2 MEN N Metta E268 r J qs C LAV LOCALLUS y Lav VCI Yili dir M 8 Using the touch pad Show Status and Notification Banner Recommended History n C
5. One 3V lithium manganese dioxide battery 3V CR2025 0 85mA Average 165mAh 3 0V CR2025 150 hours 50 F 104 F 10 C 40 C 4 F 113 F 20 C 45 C Product specifications may be changed without notice in order to enhance product performance amp The continuous operating time may differ depending on the wireless communication environment and usage conditions What is Remote Support Samsung Remote Support service offers you one on one support with a Samsung Technician who can remotely e Diagnose your TV e Adjust the TV settings for you e Perform a factory reset on your TV e Install recommended firmware updates How Does it Work Having a Samsung Tech remotely service your TV is easy 1 Call the Samsung 2 Open the menu 3 Select Remote 4 The agent will then Contact Center on your TV and Management and access your TV and ask for remote go to the Support Provide the Pin to That s it support section the agent If the TV seems to have a problem first review this list of possible problems and solutions Also review the Troubleshooting Section in the e Manual If none of the troubleshooting tips apply visit www samsung com support or call Samsung Customer Service at 1 800 SAMSUNG 1 800 726 7864 Flickering and Dimming Component Connections Screen Color Screen Brightness Unwanted Powering Off Trouble Powering On Stand Assembly Cannot
6. near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc If this apparatus accidentally gets wet unplug it and contact an authorized dealer immediately This apparatus uses batteries In your community there might be environmental regulations that require you to dispose of these batteries properly Please contact your local authorities for disposal or recycling information Do not overload wall outlets extension cords or adaptors beyond their capacity since this can result in fire or electric shock Power supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them Pay particular attention to cords at the plug end at wall outlets and the point where they exit from the appliance To protect this apparatus from a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the set due to lightning and power line surges Before connecting the AC power cord to the DC adaptor outlet make sure the voltage designation of the DC adaptor corresponds to the local electrical supply Never insert anything metallic into the open parts of this apparatus Doing so may create a danger of electric shock To avoid electric shock never touch the inside of this apparatus Only a qualified technician should open this apparatus
7. B Brne LindbpoBoro n nnn 6ykBeHHOrO o6os3HaueHus CuMBon Keneugnik onakreiH 005 2011 TexHukanbik pernaMeHTiHe ceitkec KONMaHbINagbl X9He OCbI H MH H KarrraMacbiH ekiHLLi per na ganaHyfa apHaIIMaraHbiH XX9He XKOIOFa XaTaTbIHbIH Kepcereji Ocbi eHiMHiH KanTaMacbiH A3bIK TYNIK eHiMAaepiH cakray YWIH naAnaraHyra TbIMbIM Car biHaJIbl CumBOn KanTaMaHbl KOO MyMkiHAiriH kepcereni CUMBON CAHAbIK Kon xxeHe HeMece epin Oenrinepi TypiHaeri kantama MarepuarnbiHeiH OenriciMeH TONbIKTbIPbINYbI MyMKIH TUA BN68 04972A 01
8. Find a Channel If your Samsung Television is flickering or dimming sporadically you may need to disable some of the energy efficiency features Disable Energy Saving System Eco Solution Eco Sensor and or Energy Saving System Eco Solution Energy Saving and check again If you find that the color on your Samsung television screen is not correct or the black and white colors are off run a Self Diagnosis Picture Test Support Self Diagnosis Picture Test If the picture problem is caused by the TV the problem should be visible in the Picture Test If the problem is not visible next confirm that the TV s video input jacks are connected to the correct external video device output jacks and that none of the connections are loose Finally if possible test your external video devices by connecting them to another TV If you find that the colors on your Samsung TV are correct but just a little too dark or bright try adjusting the following settings first Navigate to Picture and adjust Cell Light Contrast Brightness Sharpness Color Tint G R and other picture quality adjustment settings If your Samsung TV appears to turn off by itself try disabling some of the TV s energy efficiency and automatic off features Check if Sleep Timer System Time Sleep Timer has been enabled Sleep Timer automatically turns off the TV after an amount of time that you select If the Sleep Timer has not been enabled see if No Signa
9. Make sure to plug the power cord in until it is firmly seated When unplugging the power cord from a wall outlet always pull on the power cord s plug Never unplug by pulling on the power cord Do not touch the power cord with wet hands If this apparatus does not operate normally in particular if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time especially when children elderly or disabled people will be left alone in the house Accumulated dust can cause an electric shock an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust high or low temperatures high humidity chemical substances or where it will operate 24 hours a day such in an airport a train station etc Failing to do so may lead to serious damage of your TV Use only a properly grounded plug and wall outlet An improper ground may cause electric shock or equipment damage Class Equipment only To turn this apparatus off completely you must disconnect it from the wall outlet Consequently the wall outlet and power plug must be readily accessible at all times
10. ard do not expose this e Ventilation Do not place the apparatus in a rack or bookcase Ensure that there is adequate ventilation and that you ve followed that manufacturer s instructions for mounting and installation This monitor complies with SWEDAC MPR II recommendations for reduced electric and magnetic fields __ Mercury Statement LCD Monitor LCD TV DLP Projection TV Projector for USA only Contains Mercury Dispose According to Local State or Federal Laws Wiring the Mains Power Supply Plug UK Only IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BSI1362 of the same rating must be used Never use the plug with the fuse cover omitted if the cover is detachable If a replacement fuse cover is required it must be of the same colour as the pin face of the plug Replacement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitable safety approved extension lead or consult your dealer for assistance However if there is no alternative but to cut off the plug remove the fuse and then safely dispose of the plug Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cor
11. by adding environment on function price quality design that were the essence for product development These environmental characteristics are endorsed by the award of the European Eco label also known as the Euro Flower issued by the European Commission as approval of the product environmental status for energy saving facilities for recycling and a host of other features The full list of criteria and more information on the ecolabel canbe found at the web site address http www ecolabel eu Recycling Information Take back offer For recycling information for our products please contact the company corresponding to your region of residence For those who reside in other countries please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way The information of Regional Takeback Schemes can be found at Samsung s web site http www samsung com recycling compliance CIS Only CuMBOn He ANA nuujeBol nponykuW npAMeHSIeTCs B COOTBeTCTBMe C TEXHUYECKMM perraMeHTOM TaMwoxeHHoro coio3a O OesonacHocTu ynakoskn 005 2011 n yka3biBaer Ha TO uTO yniakoBKa AaHHoro nponykra He npenHa3sHaueHa Ans noBTOpHOrO MCDOTIBSOBaHMSI M NOANExKUT yrun3auu YnakoBky AAHHOTO NPOAYKTa 3anpeujaeTcs Mcnorb3oBarb ANA XPAHEHUA nuujeBol nponykuM CuMBon netna Me6uyca ykaabiBaer Ha BOS3MOXHOCTb yTunnza nn ynaKoBKN CUMBON MOXeT ObITb nononHeH o603HaueHueM MaTepnana ynakoBKM
12. immunity of broadcast receivers and associated equipm European Class A Warning If the user manual declares the product as Class A following statement applies This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Az 7I7 878 BHS amp w7nx 0 JIE E E Ag VAUN ENZA HUR FE ASAE 0 AS FLSA HeH AES Lilo X 9i0l X MSE as syer BUC Ba 7 71 ASS E S amp el7Ixp 0 21718 7FSS Bg SAAB 712M SS IBAN ASote AS mes op SE ASMA ASS MWS UC Italian Homologation Notice Questo apparecchio e fabbricato in conformita al D M 28 08 95 n 548 ed in particolare a quanto specificato nell Art 2 comma 1 Questo apparecchio e fabbricato nella U E in conformita al D M 28 08 95 n 548 Art 2 comma 1 ed al D M 26 03 92 Art 1 For products produced in countries except European Community Questo apparecchio e fabbricato in conformita al D M 28 08 95 n 548 ed in particolare a quanto specificato nell Art 2 comma 1 For products produced in European Community Questo apparecchio e fabbricato nella U E in conformita al D M 28 08 95 n 548 Art 2 comma 1 ed al D M 26 03 92 Art 1 Important Safety Instructions UL Only Read these instructions Keep these instructions Heed all warnings Follow all instructions e Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance w
13. is the default port for a cable HDMI Port or satellite set top box Use the other ports for Blu ray players T game consoles and other devices e e e o e Wired Ethernet Good Connection Component and AV Match the colors on your device s cables to the colors on the jacks Connect the yellow composite video out connector from an AV device to the green AV IN jack Connect the cable from the antenna or cable TV outlet AV also accepts component video connections red green blue gt Make sure you have the correct cable before plugging it in Illustrations of common plugs and Step 3 Insert the batteries into the remote control jacks are shown below To open put your plastic card into the notch CablePlugs Ports Jacks Do not plug cables in upside down Be sure to check the orientation of Warning the plug before plugging it in Optical Step 4 Power on and start the initial setup Troubleshooting Information required The stand is wobbly or crooked Wi Fi network password if you use one Make sure the arrows on the stand are properly aligned Zip code The TV won t turn on Cable or satellite provider info hus P Make sure all cables are fully inserted and that the remote has batteries installed The TV must be connected to the Internet to use the Smart Features If you have a wireless network we recommend that you confirm that your network router is switche
14. mnm NER S oearching VNDE VE E TI wo C CO CO CO CO Using the Virtual Remote Panel 10 Turning on the TV 11 Switching Between Video Sources 12 Universal Remote Control oetup 12 Add the External Device Viewing the e Manual 13 Viewing the e Manual 13 Scrolling a Page 13 Using the lop Icons 13 Returning to the Home Page 13 Searching the Index 14 Searcning Pages 14 Closing the e Manual 14 Jumping to a Menu ttem 14 Updating the e Manuai Network Configuration 15 Connecting to a Network 15 Network Connection Wireless 15 Wireless Network Precautions 15 Network Security Protocols 16 Network Connection Wired 3D Basics 1 3D Active Glasses 17 Pairing GD Active Glasses 19 Watching SD Video 20 What is Remote oupport Troubleshooting and Other Information 21 Troubleshooting 22 Mounting the TV on the Wall Using the Wall Mount Kit Optional 24 Assembling the Cable manager 24 Eco Sensor and Screen Brightness 25D Maintenance 25 Providing Proper Ventilation for Your TV 20 oecuring the TV to the Wall Specifications 2f opecifications 2O Dimensions 28 Licenses Guides 29 Warranty Information 32 Regulatory Compliance Statements For 3D Active Glasses 33 SAMSUNG BRAND PRODUCTS 33 LIMITED WARRANTY TO ORIGINAL PURCHASER Figures and illustrations in this User Manual are provided for reference only and may differ from the actual oroduct appearance Product design and specifications m
15. opa wo 000 ow We 000 Ox 20000 090 MOK OOP QP x 10000 4000 GOK 0000 4006 px woe owe x 9000 0000 2000 WA ce MOK 0000 W XXX 000 4400 WOK MOM oo SAMSUNG ELECTRONICS CO LTD America QA Lab of Samsung 3351 Michelson Drive Suite 290 Irvine CA92612 USA Warning User must use shielded signal interface cables to maintain FCC compliance for the product Provided with this monitor is a detachable power supply cord with IEC320 style terminations It may be suitable for connection to any UL Listed personal computer with similar configuration Before making the connection make sure the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal or exceeds the monitor voltage rating For 120 Volt applications use only UL Listed detachable power cord with NEMA configuration 5 15P type parallel blades plug cap For 240 Volt applications use only UL Listed detachable power supply cord with NEMA configuration 6 15P type tandem blades plug cap This television receiver provides display of television closed captioning in accordance with Section 15 119 of the FCC rules TV broadcast receivers with picture screens 13 inches or larger in diameter models only ICES 003 Class A Notice Avis NMB 003 Classe A This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme la norme NMB 003 du Canada ICES 003 Class B Notice
16. protegent les cordons contre les interferences Lorsque vous branchez un cable ouvrez le tore de ferrite et fixez le autour du cable pres de la fiche conform ment a l illustration BN68 05201B 00 This is Please be careful of surface scratch Thie produnt high glossy Make sure to brush off the dirt on the proved cloth before cleaning the cabinet For cleaning the front cabinet make sure you use only the provided cloth on which to spray water4to timesbe fore wiping it out softly in one direction After wipe the cabinet to remove any moisture Only use water as a cleansing Dieses Produkt hat eine hochglanzende Oberfl ache die sehr En OIR5O EE 47 6 mut amp gyoz RIAS ClO FAIR cg apr greet ggmO Mg gt YUC MBM ML aux icem sil Paomia par cons quent de rester vigilant durant l installation Veillez enlever la salet l aide du chiff on fourm avant de nettoyer le ch ssi Pour ie meuble avant assurez vous de n utiliser que le chiffon fourni A spergez le nettoyer d eau 4 26 fois puis nettoyer en frottant dans une seule direction Apres le nettoyage essuyer le ch ssis pour enlever l humidit geboten ist tees SS ces aient ith be Sea e Gina Zun iidr eani Seite er dis ichitig a aaa ee ee ee ee ee ee ee eee eee aa meg ee Ge GS GRO E ee GO ROG Ge Dee d m G R oc i u om mcm mc mcm m RR m 0 occorre far
17. string before moving the TV Verify all connections are properly secured Periodically check the connections for any sign of fatigue or failure If you have any doubt about the security of your connections contact a professional installer 50 F to 104 F 10 C to 40 C 10 to 80 non condensing 4 F to 113 F 20 C to 45 C 5 to 95 non condensing 20 20 51 Class mm mm mmm 60 Class 50 6 measured diagonally 59 9 measured diagonally 10W x2 46 9 x 27 9 x 2 2 inches 1191 9 x 709 1 x 57 0 mm 46 9 x 31 4 x 12 0 inches 1191 9 x 798 8 x 307 2 mm 54 9 x 32 7 x 2 2 inches 1396 9 x 831 3 x 57 0 mm 54 9 x 36 5 x 14 7 inches 1396 9 x 928 x 375 5 mm 40 7 lbs 18 5 kg 44 7 lbs 20 3 kg 1920 x 1080 60 6 Ibs 27 5 kg 66 3 Ibs 30 1 kg 1920 x 1080 Black amp White EUN 64 0 measured diagonally 10W x2 58 4 x 34 5 x 2 2 inches 1483 8 x 877 1 x 57 0 mm 58 4 x 38 3 x 14 7 inches 1483 8 x 974 5 x 375 5 mm 72 7 lbs 33 0 kg 78 4 lbs 35 6 kg 1920 x 1080 Design and specifications are subject to change without prior notice amp The actual appearance of the TV may differ from the images in this manual depending on the model amp This device is a Class B digital apparatus amp For information about the power supply and more information about power consumption refer to the label attached to the product Typical power consumption is measure
18. the TV to brighten and dim automatically If you want to turn this function off go to Menu gt System gt Eco Solution gt Eco Sensor Do not block the sensor with any material It can decrease picture brightness Maintenance amp fa sticker was attached to the TV screen some debris can remain after you remove the sticker Please clean the debris off before watching TV The exterior and screen of the product can get scratched during cleaning Be sure to wipe the exterior and screen carefully using the cloth provided or a soft cloth to prevent scratches Providing Proper Ventilation for Your IV When you install your TV maintain a distance of at least 4 inches between the TV and other objects walls cabinet sides etc to ensure proper ventilation Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature amp Whether you install your TV using a stand or a wall mount we strongly recommend you use parts provided by Samsung Electronics only e If you use parts provided by another manufacturer it may cause difficulties with the product or result in injury caused by the product falling 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches Other Warnings amp The actual appearance of the TV may differ from the images in this manual depending on the model amp Be careful when you touch the TV Some parts can
19. the following measures HReorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help User Information 0000 0000 oox cge osou XX ooro OO Wx cce 000 W 400 004 0C 0000 O00 OON O8 OM 34 0000 000 0000 OP DOO 0000 P oF KO 4440 k WO 066 Ok A MS O OO MO MODI MO Oe DKO 00000 906b MON M OOO AKO 000 6B 2M 008 06b MRO XOU HAO NKO OOO O XU Sb booe sea 006 Done Sopo ORS Gosb speet DoS 0000 20006 DO OPM W oo Doon eE D0 SOOD WOR SOI OCON WO OWO 00000 MO Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment If necessary consult with your dealer or an experienced radio television technician for additiona suggestions You may find the booklet called How to Identify and Resolve Radio TV Interference Problems helpful This booklet was prepared by the Federal Communications Commission It is available from the U S Government Printing Office Washington DC 20402 Stock Number 004 000 00345 4 The party responsible for product compliance be a MO Pc MM HE O O PM OMA XD SOS MOM MOL agoe INL 000 GOI MHOC HEED AOOO NAKO OAD CED MMO X400 000 3000 1605 ADM 000 G 0000 pe ooe 0000 3900 onee NENT ak 4000 0009 ME X000 00x XODt GO 000x JM OD 09x XC 2000
20. updating to the latest version Connecting to a Network Connecting the TV to a network gives you access to online services such as Smart Hub and lets you update the TV s software online directly from Samsung com Network Connection Wireless Connect the TV to the Internet using a standard wireless router or modem Wireless IP Router or Modem that has a DHCP Server The LAN Port on the Wall LAN Cable Not Supplied Wireless Network Precautions e This TV supports the IEEE 802 11a b g n communication protocols Samsung recommends using IEEE 802 11n Otherwise when you play video over a network connection the video may not play smoothly e To use a wireless network the TV must be connected to a wireless router or modem If the wireless router supports DHCP the TV can use a DHCP or static IP address to connect to the wireless network e Select a channel that is not currently in use for the wireless router If the channel set for the wireless router is currently being used by another device the result is usually interference and or a communications failure e Most wireless networks have an optional security system To enable a wireless network s security system you need to create a security key using characters and numbers and then enter that key into the router through its menu You then must enter this security key into any other devices you want to connect to the wireless network Network Security
21. 3D TV The Samsung 3D glasses communicate with Samsung 3D TVs via the 2 4GHz RF band amp The Samsung 3D glasses are only compatible with Samsung D E and F series 3D TV s that were released in 2011 2012 and 2013 These 3D glasses cannot be connected to other Bluetooth devices Parts LED Indicator amp Power Button amp For details on how to attach the glasses temples refer to the separate 3D glasses manual For details on how to pair the glasses with the TV refer to the separate 3D glasses manual or to page 18 in this manual Liquid crystal shutter Replacing the Battery If the red LED blinks every two seconds continually replace the battery with a new one Insert the side of the battery into the side marked with in the battery compartment amp To check the remaining battery capacity refer to the pairing section in this manual Pull the battery cover Open the battery cover Remove the battery Replace the battery Push the battery cover Close the battery cover downward downward Pairing 3D Active Glasses amp What is Pairing Pairing is the process of connecting 3D glasses and a 3D TV so that the two devices can exchange data amp Ensure your Samsung TV and 3D glasses are no farther than 19 5 in 50 cm apart from each other while pairing is in progress Turning the glasses on Press the power button briefly The green LED turns on for 3 seconds Make sure that 3D is activated on the T
22. MSUNG SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS OR ANY OTHER SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE MISUSE OR INABILITY TO USE THIS PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE WITHOUT LIMITING THE FOREGOING PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS DAMAGE OR INJURY TO PURCHASER AND PURCHASER S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state To obtain warranty service please contact SAMSUNG at Samsung Electronics America Inc 85 Challenger Road Ridgefield Park NJ 07660 2112 1 800 SAMSUNG 7267864 www sam
23. Optional Wall or Ceiling Mounting If you mount this product on a wall it should be mounted only as recommended by the manufacturer Unless it is correctly mounted the product may slide or fall causing serious injury to a child or adult and serious damage to the product Installing the Wall Mount Kit The wall mount kit sold separately lets you mount the TV on the wall For detailed information about installing the wall mount see the instructions provided with the wall mount We recommend you contact a technician for assistance when installing the wall mount bracket We do not advise you to do it yourself Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own To order the wall mount kit contact Samsung Customer Care at 1 800 SAMSUNG 1 800 726 7864 Installing a Wall Mount using the Wall mount adapter amp For more detailed information refer to the User Manual of the Wall Mount Kit amp Wall mount adapters are provided only with 46 inch or bigger TVs nanum VESA Wall Mount Kit Notes and Specifications amp Install your wall mount on a solid wall perpendicular to the floor Before attaching the wall mount to surfaces other than plaster board please contact your nearest dealer for additional information If you install the TV on a ceiling or slanted wall it may fall and result in severe personal injury
24. Protocols The TV only supports the following wireless network security protocols e Authentication Modes WEP WPAPSK WPA2PSK e Encryption Types WEP TKIP AES In compliance with the newest Wi Fi certification specifications Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802 11n mode If the wireless router supports WPS Wi Fi Protected Setup you can connect the TV to your network using PBC Push Button Configuration or a PIN Personal Identification Number WPS automatically configures the SSID and WPA key settings Your Smart TV cannot connect to uncertified wireless routers Network Connection Wired There are three main ways to connect your TV to your network using cable depending on your network setup They are illustrated below TV Rear Panel External Modem ADSL VDSL Cable TV Modem Cable Not Supplied LAN Cable Not Supplied TV Rear Panel The Modem Port on the Wall External Modem IP Router that has a ADSL VDSL Cable TV DHCP Server Modem Cable LAN Cable LAN Cable Not Supplied Not Supplied Not Supplied TV Rear Panel The LAN Port on the Wall LAN Cable Not Supplied The TV does not support network speeds less than or equal to 10Mbps Use Cat 7 cable for the connection 3D Active Glasses Features Samsung s SSG 5100GB 3D glasses enable you to view 3D images on your
25. Using this function you can access and control menu options and functions using motions To use the Smart Interaction Feature connect the SMART TV camera sold separately to your TV Device Manager Use the TV features with a USB or Bluetooth keyboard and mouse e Screen Mirroring Displays mobile device screens on your TV using a wireless connection Using the Smart Touch Control Use Voice Recognition function with the microphone embedded in remote control The Voice Recognition function can be affected by unclear pronunciation voice level or surrounding noise Turn on and off the satellite or cable set top box connected to the TV For this the Smart Touch Control must be configured as a universal remote control See the e Manual chapter Controlling the TV Universal Remote Control Setup Turns the TV on and off VOICE Take your voice command and Displays and selects the available video enter a text using your voice Sources e Changes channels MUTE Cuts off the sound I temporarily i i Displays a virtual remote control on the screen See the e Manual chapter Controlling the TV gt Virtual Remote Control Touch Pad Drag on the touch pad to move the focus on the screen Press the touch pad to run activate or select the highlighted item Press and hold the touch pad to display the Channel List Adjusts the volume LIGHT Turn on the backlight for the
26. V before using the 3D glasses Turning the glasses off Press the power button briefly The red LED turns on for 3 seconds Performing the pairing process Turn the TV on and let it power up completely Press and hold the Power button on the glasses The green and the red LEDs blink alternately for 2 seconds Operating range Recommended viewing distance E Recommended pairing distance 2 6m 6 5 to 19 5 ft 50 cm or less 19 5 in Once the 3D glasses are paired the remaining battery capacity is displayed on the TV screen This feature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013 amp If you keep trying to pair the glasses and the TV after pairing has failed the battery level will decrease significantly However the battery level will recover to a certain degree in about a minute amp The working distance is affected by the presence of obstacles a person metal walls etc between the glasses and the TV and the strength of the Bluetooth signal Turn off the 3D glasses when they are not in use If you leave the 3D glasses on the battery lifespan decreases Pairing steps 1 2 3 Turn on the TV and then move the glasses within 19 5 inches of the TV Press the power button on the 3D glasses briefly The 3D glasses will power on and pairing will start The message 3D glasses are connected to TV will be displayed on the TV screen when th
27. a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC Class B Notice Pee ee MO OM M goce MeO WO wer cwe Mok o ome WO MMOG 0000 K O 0900 MO 00040 GP WO Wese DOO WOM QO OOR MOM MO MOA WO WOP DAN WAK OWO OA NO WO MA MK GOP QOX MO PO Pk MPE MD PP WO G K X AP MA MDE AP k O GM MMA WME O M MOA O O WS P A WG P OP DP PP Da G PP WO PG O OP Q Pe w oo aoe This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of
28. ad until the playback control panel appears select the EY button and then press the touch pad Searching the Index Select the E button or select J on the top right of the screen to display the index Select a term to display the page containing the term Searching Pages Select the A button or select on the top right of the screen and enter search criteria Select a page from the list of search results to display it Closing the e Manual To close the e Manual press hold the RETURN button or select X at the upper right corner of the screen Jumping to a Menu Item To jump directly to the menu item that is described in the current section select d a IL is possible to jump from a menu item directly to the related section in the e Manual On a menu screen press the MORE button on the Smart Touch Control and then select e Manual on the virtual control panel that appears on the screen amp y This feature may not be available depending on the menu nhu x e t anuat Guide Picture 1 Getnng Started A 0 e Manual 5 amatam dio RE e Cel Light essa inp Ts E Contrast nmm am eat e Brightness e Sharpness e Color Tint G R Updating the e Manual Open the Smart Hub and select Apps and then select More Apps The e manual can be updated in the same way with an application update On the More Apps screen select Update Apps Select e Manual from the list The e Manual starts
29. ail to remove the cover completely 2 Insert 2 AAA batteries making sure to align the positive and negative ends correctly 3 Align the battery cover with the back of the remote control and then press down along the edges until itis completely attached to the remote control Reconnecting the Smart Touch Control If you need to reestablish the connection between the TV and the Smart Touch Control press the pairing button at the back of the Smart Touch Control pointing at the remote control sensor of the TV The Smart Touch Control s pairing button The pairing button can be accessed by removing the Smart Touch Control s battery cover Pressing the pairing button automatically reestablishes the connection between the Smart Touch Control and the TV Low Battery Power Warning If the battery becomes low while using the Smart Touch Control the following alarm window appears at the bottom of the left screen If the alarm window pops up replace the batteries of the Smart Touch Control Use alkaline batteries for longer usage Low battery alarm window Using the touch pad Use the touch pad to implement various commands Navigate to Tutorial System gt Device Manager gt Smart Touch Control Settings gt Tutorial to view an on screen guide to using the Smart Touch Control Drag on the touch pad to move the focus pointer or highlight in the Press the touch pad to select the item highlighted or in focus direc
30. ay change without notice Features of your new TV e 3D This new feature enables you to view 3D content e SMART HUB This TV features Smart Hub a multi purpose entertainment and family center With Smart Hub you can surf the web download applications and stay in touch with family and friends through social networking services In addition you can view or play photo video and music files stored on external storage devices Press amp to launch Smart Hub Choose a service using the icons displayed in the top part of the screen Smart Hub services and functionality include Social Watch the latest YouTube videos and you and your friends video posts on Facebook and Twitter You can also make video calls to friends by connecting the TV to a camera sold separately Apps Samsung Apps offers an extensive collection of free and paid news sports weather and gaming content you can directly download to and enjoy on your TV On TV Check a listing of programs that are currently airing or are scheduled to air Movies amp TV Shows Purchase and watch movies and series without a separate external device Photos Videos amp Music Play back photo video and music files from an external storage device e Anynet HDMI CEC This allows you to control all connected Samsung devices that support Anynet with your Samsung TV s remote e e Manual Provides a detailed on screen user s manual built into your TV e SMART Interaction
31. be warm or hot 1 Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do not hang on or destabilize the TV Doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions provided in the Safety Flyer included with your TV For added stability and safety you can purchase and install the anti fall device as described below To Avoid the TV from Falling Put the screws into the clamps and firmly fasten them onto the wall Confirm that the screws have been firmly installed onto the wall You may need additional material such as an anchor depending on the type of wall Since the necessary clamps screws and string are not supplied please purchase these additionally Hemove the screws from the back center of the TV put the screws into the clamps and then fasten the screws onto the TV again Screws may not be supplied with the product In this case please purchase the screws of the following specifications Screw Specifications e Fora 43 64 inches M8 Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly amp NOTE Install the TV near to the wall so that it does not fall backwards tis safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV Untie the
32. buttons The backlight lasts for only a few seconds Turns the remote control light on or off When on the buttons become illuminated for a moment when pressed Using the remote control with this button set to On will reduce the battery usage time DVR Displays the STB EPG Electronic Program Guide MENU Opens the OSD 3D Turns the 3D function on or off See e Manual chapter TV Viewing 3D TV Displays the EPG Electronic Program Guide Brings up Smart Hub applications See the e Manual chapter SMART TV Features Smart Hub To exit an application that is running easily press the 8 button Returns to the previous menu Connecting to the TV In order to operate the TV using a Smart Touch Control you must first pair it to the TV via Bluetooth 1 To turn on the TV point the Smart Touch Control at the remote control receiver of the TV and press the 5 button The remote control receiver s location may vary depending on the model 2 Open the battery cover on the back of your Smart Touch Control and press the Pairing button 3 A Bluetooth icon will appear at the bottom left of the screen as shown below The TV will then attempt to connect to the Smart Touch Control automatically lt Attempting to connect and completion icons Inserting the Batteries AAA X 2 1 Slightly lift the battery cover by pulling the strap or using a plastic card Next pull on the cover s notch with a fingern
33. by a SAMSUNG authorized service center The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG s authorized service center SAMSUNG will repair or replace this product at our option and at no charge as stipulated herein with new or reconditioned parts or products if found to be defective during the limited warranty period specified above All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG Replacement parts and products assume the remaining original warranty or ninety 90 days whichever is longer Certain products are eligible for In home service at Samsungs discretion To receive in home service the product must be unobstructed and accessible to service personnel If during in home service repair cannot not be completed it may be necessary to remove repair and return the product If in home service is unavailable SAMSUNG may elect at our option to provide for transportation of our choice to and from a SAMSUNG authorized service center Otherwise and for 37 and smaller LCD LED TV transportation to and from the SAMSUNG authorized service center is the responsibility of the purchaser This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and except to the extent otherwise expressly provided for in this statement noncommercial use of this product and shall not apply to the following includ
34. ce to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Heorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation For product available in the USA Canada market only channel 1 11 can be operated Selection of other channels is not possible This device and its antenna s must not be co located or operation in conjunction with any other antenna or transmitter FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an u
35. ch Control The list appears at the bottom of the screen Press the RECOMM SEARCH button again The keypad will appear on the screen Enter search criteria to search not only many apps and their contents on the TV but also the Web Refer to e Manual gt SMART TV Features gt Searching for more information Using the Virtual Remote Panel Press the MORE button to display the virtual remote panel on the TV screen The virtual remote panel consists of the number panel a playback control panel and the quick access panel Use the touch pad to highlight and select icons numbers and buttons on the panels The displayed virtual remote panel on the TV screen may differ depending on the country Channel History No Channel numbers have been saved Changing the Virtual Remote Panel You can change which virtual remote panel is displayed on the TV screen To shift between panels move the focus highlight beyond the left or right edge of the displayed panel Use left right scroll function on the touch pad to change the panel easily Using the Number Panel Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV Changing the channel using the number pad leaves a record allowing you to easily return to previous channels Using the Playback Control Panel Use the playback control panel to pause rewind fast forward skip to the next file select a function with
36. d IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW Russia Only PCT Notice Lr AB57 MPR II Compliance MPR ll applied model only This monitor complies with SWEDAC MPR II recommendations for reduced electric and magnetic fields EU Eco Label EU Eco Label applied model only Products which have model codes that end in XU are intended for the UK market Samsung has not applied for Ecolabels for products with this specific model code Better for the environment High Energy Efficiency e Reduced CO emissions Designed to facilitate repair and recycling Ecolane better for you www ecolabel eu EU Ecolabel HU 022 02 SAMSUNG Electronics makes an effort to develop environment friendly product that minimizing an impact to environment through whole process from getting raw materials production transportation usage and end of life disposal
37. d according to Energy Star Program requirements for Televisions Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 Standby mode To decrease power consumption unplug the power cord when you don t intend to use the TV for a long time Dimensions e Jack panel detail Rear view COMPONE i t ous c EA m P AIR CABLE ANT IN Unit inches The displayed image may differ depending on the model NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the dimensions before installing your TV Not responsible for typographical or printed errors 2013 Samsung Electronics America Inc Licenses LY DOLBY 2 dts T DOLBY a dts Premium Sound 5 1 Studio Sound Designed with DIVX Hom TECHNOLOGY Warranty Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interferen
38. d on and working My remote gesture or voice controls don t work before you start the initial setup If you have a wired network we recommend that you connect The TV shi ith i ick i fth Mak Il of them h the TV to the network withis CAT 7 cable befoteyou Dedin e TV ships with protective stickers covering some of the sensors Make sure all of them have been removed AN have extra parts Power on to start the initial setup The TV includes some optional parts to help with wall mounting and cable routing Connect to your network wired or wireless Search for channels from your TV service provider aa ee If you experience issues please do not take the TV back to the store In the United States of America call us at 1 800 SAMSUNG 1 800 726 7864 or visit us at www samsung com spsn for support and warranty service For other countries refer to Contact SAMSUNG After you have finished the initial setup you can configure the universal remote control settings WORLDWIDE in the user guide These settings let the Smart Touch remote control external devices connected to the TV such as a set top box or Blu ray player Congratulations on your new Smart TV Ferrite Core Tore de gt ferite PN51 F5500AF PN60F5500AF O 3301 092049 4EA English Power Cord The ferrite cores are used to shield the cables from interference When connecting the ferrite core to a cable open the ferr
39. e antenna type and its gain should be so chosen that the equivalent isotropically radiated power e i r p is not more than that necessary for successful communication IC Radiation Exposure Statement This equipment complies with IC RSS 102 radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body IMPORTANT WARRANTY INFORMATION REGARDING TELEVISION FORMAT VIEWING amp See the warranty card for more information on warranty terms Wide screen format PDP Displays with 16 9 aspect ratios the ratio of the screen width to height are primarily designed to view wide screen format full motion video The images displayed on them should primarily be in the wide screen 16 9 ratio format or expanded to fill the screen if your model offers this feature with the images constantly in motion Displaying stationary graphics and images on the screen such as the dark sidebars on non expanded standard format television video and programming should be limited to no more than 596 of the total television viewing time per week Additionally viewing other stationary images and text such as stock market crawls video game displays station logos web sites or computer graphics and patterns should be limited as described above for all televisions Displaying stationary images that exceed the above guidelines can cause
40. e a j Prima di e ettuare l pukna del teisio assacurarsi che susce AH asi pulito Per pulire l parte amenore del cabinet assicurarsi di utilizzare solo il panno fornito che dovr essere spruzzato d acqua 4 o 6 volte prima di strofi nario delicatamente in Poe sit vetri diim ar proceder limpeza da parte frontal certh que se de que utiliza apenas o pano fornecido ligeiramente humedecido limpando suavemente numa unica direc o Depois da hmpeza passe um pano seco sobre a caia do apareiho para remover a humidade jen emin em creme Rena I O A rn D uu ee m domom omo momo U A AS DUANE UNS E UNDER NS SS UNIO ERU UE NR UR UR n ee ee ee GS GS NUS UNS DN GUN UG ee GO GE ES DN DN ee GEO GNO GEO NA ANS eee GN ORO ee EN S UNS ee ee DNO EO ee ee eee GER OE NN GO GER GN ND GUN NN DES GN NN GUN QN GN NS UNES ee GN F UNIO m LS LL Ml Das Ez demam meom So ee te tts eee GAS GARS UK IMPORTANT SAFETY PRECAUTIONS e Placing the television on a platform stand cabinet table or other surface which is recommended by Samsung or sold with the product secure and stable Sufficiently wider in the base than the base measurement of the television Strong and large enough to support the size and weight of the television e Positioning the television close to the wall to avoid the possibility of the television
41. e pairing is successfully completed e f pairing fails the 3D glasses will power off e lf the first attempt to pair fails power the TV off and on again and perform step 2 e How to pair again Press the power button on the 3D glasses for more than 1 second You must pair the glasses again in the following situations fthe 3D glasses do not function even when the power button is pressed especially if the TV has just been a repaired f you want to play 3D content on another Samsung 3D TV model that belongs to the D E or F series released in 2011 through 2013 You must pair the glasses with the other TV Watching 3D Video some 3D modes may not be available depending on the format of the image source To watch in 3D you must wear 3D Active Glasses and turn the glasses on by pressing the power button 1 Go to the 3D screen Picture gt 3D 2 Select the 3D Mode The 3D Mode screen appears 3 Set the 3D Mode of the image you want to view Troubleshooting Replace the battery The 3D glasses should be close to the TV Make sure that the distance between the TV and your 3D glasses is less than 19 5 feet 6m in a straight line Check the 3D function settings of your TV The battery is dead Replace the battery Specifications Model Number SSG 5100GB Liquid crystal 2 6m 6 5 to 19 5 ft 362 296 20 fields second 21 59 76 oz including the battery 24 0 0 50 85 018o0z
42. f the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CALIFORNIA USA ONLY This perchlorate warning applies only to primary CR Manganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate SAMSUNG BRAND PRODUCTS LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product as supplied and distributed by SAMSUNG and delivered new in the original carton to the original consumer purchaser is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of 90 Days Parts and Labor for Commercial Use 40 Carry In or In and Larger Home LCD LED TV 1 Year 1 Year 37 and Smaller Carry In Home Carry In or Projector Excluding Lamp 2 Year 2 Year All Pick up PICO amp LED Carry In or J 180 Days after Purchasing and 600 Hours of Use Lamp on Projector This limited warranty begins on the original date of purchase and is valid only on products purchased and used in the United States To receive warranty service the purchaser must contact SAMSUNG for problem determination and service procedures Warranty service can only be performed
43. falling when pushed e Ensuring your television is installed by an authorized Samsung installer e Following the instructions for wall mounting in the installation manual and using the mounting equipment supplied by Samsung e Placing the television toward the back of the furniture or surface on which it is placed e Ensuring that the television does not hang over the edge of the furniture or surface on which it is placed Not hanging anything from or on the television e Anchoring both the television and the furniture on which it is placed to a suitable support especially in the case of tall furniture such as e cupboards or bookcases which exceed one metre in height This can be done by using sturdy brackets safety straps or mounts that are made specifically for flat screen televisions e Not placing any material between the television and the furniture on which it is placed e f the furniture on which the television is placed has drawers cabinets or shelves under the television taking steps to prevent children from climbing such as installing safety latches so the doors cannot be opened e Keeping pets away from the television e Educating children about the dangers of climbing on furniture to reach the television or its control Failure to take these safety precautions may cause the television to fall from the stand or mounting equipment causing damage or serious injury Regulatory Compliance Statements Federal Communications Commi
44. ing but not limited to damage which occurs in shipment delivery and installation applications and uses for which this product was not intended altered product or serial numbers cosmetic damage or exterior finishes accidents abuse neglect fire water lightning or other acts of nature use of products equipment systems utilities services parts supplies accessories applications installations repairs external wiring or connectors not supplied or authorized by SAMSUNG which damage this product or result in service problems incorrect electrical line voltage fluctuations and surges customer adjustments and failure to follow operating instructions cleaning maintenance and environmental instructions that are covered and prescribed in the instruction book reception problems and distortion related to noise echo interference or other signal transmission and delivery problems brightness related to normal aging or burned in images SAMSUNG does not warrant uninterrupted or error free operation of the product THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SA
45. ion about your TV s key features and instructions for using them To view the e Manual use one of the following methods e Open the Support menu and choose e Manual e Press the MORE button on the Smart Touch Control to display the virtual remote control on the TV screen Flick the touch pad until the quick access panel appears select the e Manual icon and then press the touch pad amp In the e Manual words in blue refer to screen menu options and words in light blue refer to remote control buttons A printable version of this guide is also available at www samsung com support scrolling a Page To scroll a page use of one of the following methods e Place the focus on the A or button at the right edge of the screen and then tap the touch pad e Drag or flick up or down from the line on either the left or right edge of the touch pad e Place the focus on the A or w button at the right edge of the screen drag or flick up or down on the touch pad Using the Top Icons Use the Back Forward and Opened pages icons on the top left of the screen to navigate through pages These icons are available after you have viewed two or more pages Returning to the Home Page To return to the home page select the EY button or select ft on the top right of the screen amp To select a letter button EX 6 8 E press the MORE button on the Smart Touch Control to display the virtual remote panel on the TV screen Flick the touch p
46. isplay panel for more than several minutes as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention refer to e Manual to reduce the degree of brightness and contrast of the screen when displaying a still image Heat on the top of the Plasma TV The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product This is normal and does not indicate any defect or operation failure of the product However children should be prevented from touching the upper part of the TV The TV is making a cracking noise A cracking noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity This is normal and not a defect of the unit Cell Defects Your plasma TV has a panel containing 2 360 000 HD level to 6 221 000 FHD level pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product Avoid operating the TV at temperatures below 41 F 5 C A still image displayed too long may cause permanent damage to the PDP Panel Watching the Plasma TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and center of the screen caused by the difference of light emis
47. ite core and clip it around the cable near the plug as shown in the figure e A Maximum distance between the ferrite core and the end of the cord inserted in the TV 3 4 inches 20mm Antenna Cable LAN Cable sold separately The ferrite cores are used to shield the cables from interference When connecting a cable open the ferrite core and clip it around the cable near the plug as shown in the figure D Use Cat 7 cable for LAN cable Component Cable sold separately The ferrite cores are used to shield the cables from interference When connecting a cable open the ferrite core and clip it around the cable near the plug as shown in the figure PN64F5500AF 3301 002049 5EA Fran ais Cordon d alimentation Les tores de ferrite protegent les cordons contre les interferences Pour fixer le tore de ferrite a un cordon ouvrez le tore et placez le autour du cordon pres de la fiche conform ment a l illustration e A Distance maximale entre le tore magn tique et l extr mit du cable branch au t l viseur 3 4 pouces 20mm Cable d antenne cable LAN vendu s par ment Les tores de ferrite protegent les cordons contre les interferences Lorsque vous branchez un cable ouvrez le tore de ferrite et fixez le autour du cable pres de la fiche conform ment a l illustration 3 Utilisez un c ble Cat 7 pour un cable LAN Cable d composantes vendu s par ment Les tores de ferrite
48. ith the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus eM uL including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped ou NOoomRONN o
49. l Power Off System Eco Solution No Signal Power Off or Auto Power Off System Eco Solution Auto Power Off has been enabled No Signal Power Off turns off the TV if no signal has been received by the TV for a specified period time Auto Power Off turns off the TV if there has been no user input in four hours When the TV is turned on the remote control receiver flashes 5 times before the screen turns on If you find that you are having problems powering on your Samsung television there are a number of things to check before calling the service department If the power cord is connected properly and the remote control is operating normally the problem might be with the antenna cable connection or the cable satellite box not being turned on Check the antenna connection or turn on the cable satellite box If you have any trouble assembling the stand review the stand assembly instruction in the Quick Start Guide Re run Setup Go to Menu gt System gt Setup or run Auto Program Go to Menu gt Broadcasting gt Auto Program For detailed troubleshooting information watch the troubleshooting videos at www samsung com spsn The TV won t turn on e Make sure the AC power cord is securely plugged in to the wall outlet and the TV e Make sure the wall outlet is working e Try pressing the 5 button on the TV to make sure the problem is not the remote If the TV turns on refer to Remote control does not work belo
50. ncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B conforme la norme NMB 003 du Canada This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement For product available in the USA Canada market only channel 1 11 can be operated Selection of other channels is not possible This device and its antenna s must not be co located or operation in conjunction with any other antenna or transmitter Under Industry Canada regulations this radio transmitter may only operate using an antenna of a type and maximum or lesser gain approved for the transmitter by Industry Canada To reduce potential radio interference to other users th
51. ng functions e Edit Name Lets you associate a device name to an input source You can select the following device names in the Edit Name option VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA To associate a device name to an input source follow these steps Select Tools in the upper right corner of the source screen Select Edit Name 1 2 3 Find the input source you want in the Source list HDMI1 HDMI2 Component etc 4 Select the blank field next to the input 5 In the device name list that appears select the name of the device attached to the input When you view the Source list the device name and the input jack will be displayed together f you have connected a PC to the HDMI IN 3 DVI port with an HDMI cable select PC from the device name list lf you have connected a PC to the HDMI IN 3 DVI port with an HDMI to DVI cable select DVI PC from the device name list f you connected an AV device to the HDMI IN 3 DVI port with an HDMI to DVI cable select DVI Devices from the device name list e Information View detailed information about the connected devices e Refresh Select if a connected device does not appear in the list If the list does not show the device after selecting Refresh check the status of the TV to device connection e Remove USB Remove the USB device from the list safel
52. nication Commission Interference Statement 1 Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Heorient or relocate the receiving antenna e increase the separation between the equipment and receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 o
53. onsibility of the purchaser Conditions covered are limited only to manufacturing defects in material or workmanship and only those encountered in normal use of the product Excluded but not limited to are any originally specified provisions for in home or on site services minimum or maximum repair times exchanges or replacements accessories options upgrades or consumables For the location of a SAMSUNG Authorized Service Center please call toll free Inthe United States 1 800 SAMSUNG 1 800 726 7864 n Canada 1 800 SAMSUNG Still image warning Avoid displaying still images such as jpeg picture files still image elements such as TV channel logos stock or news bars at the screen bottom etc or programs in panorama or 4 3 image format on the screen Constantly displaying still pictures can cause image burn in on the LED screen which will affect image quality To reduce risk of this effect please follow the recommendations below e Avoid displaying the same TV channel for long periods e Always try to display any image in full screen Use the TV set s picture format menu for the best possible match e Reduce brightness and contrast to avoid the appearance of after images e Use all TV features designed to reduce image retention and screen burn Refer to the e Manual for details User Instructions Screen Image retention Do not display a still image such as on a video game on the plasma d
54. ory guide 3D Active Glasses REQUIRED TOOLS a Phillips head screwdriver and a soft flat surface larger than the TV such as the box Put a base and screws off to assemble the 2 stand out of the box Fit the stand and mount together making sure the notch on the mount aligns with the stand Lay the TV on a soft surface screen side down Use the packing material to protect the screen Insert 4 screws and secure the stand to the mount x4 M4 X L12 51 eu x4 M4 X L10 60 64 Holding the stand parallel to the screen slide the stand into the notches on the back of the TV Insert 4 screws and secure the stand to the 6 TV E m x4 M4 X L12 51 60 64 Step 2 Connect video devices We suggest using HDMI connections whenever possible for the best picture quality The displayed image may differ depending on the model Connect the IR extender to the IR Out port to control external devices connected to the TV using the Smart Touch Control For more detailed information refer to the Universal Remote Control Setup section on the User manual Power Input USB Connections You can connect USB storage devices to the USB jacks and enjoy personal photos videos and music You can connect home theater systems to the OPTICAL or AUDIO OUT ports Best Connection HDMI HDMI Cable We suggest using HDMI whenever possible HDMI 1
55. sion on the screen Playing a DVD or a game console may cause similar effects to the screen Damages caused by the above effect are not covered by the Warranty After images on the Screen Displaying still images from Video games or a PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images for a long time Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty Caution m y The glass screen of your PDP TV can break if you accidently drop the TV Handle the TV with care When moving the TV always have two or more people pick it up and carry it as a safety precaution Do not lay the TV flat on its face or back Your Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of its glass panel and component parts during shioment It is nonetheless a fragile piece of electronics that requires careful handling Refrain from putting undue stress on any part of the packaging when shipping or unpacking the TV Use care when installing the TV Avoid placing the TV in a location where it may be struck exposed to sharp impacts or fall Panel breakage caused by a fall or impact strike is not covered under the manufacturer s warranty Regulatory Compliance Statements For 3D Active Glasses FCC COMPLIANCE Federal Commu
56. ssion FCC USA Industry Canada Equipment Standard for Digital Equipment ICES 003 Canada Voluntary Control Council for Interference VCCI Japan Bureau of Standards Metrology and Inspection BSMI Taiwan Korea Communications Commission KCC Republic of Korea Italian Post Ministry Homologation Italy FCC Class A Notice ERR BER SANYO EBD MEA SUAM nO d wo S MUNX MERLO USUS O TO Ie SO Se G OEO DOBO 55b SEAM MOM SBO DRUMS MODE SBS MON wot dbb MAk cesi As sby Mane JAS Sk 98M 258b MR SS FD MD eo BON eak oe cowe wow OBSS da x woo de k G 0000 35M OO STO WOR O0 S W 10605 y poe MECO ay DD omo cw we i000 Gii Wd D R Wk Wo 6M WO OG MBI WD EO oox 1006 This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in
57. sung com 1 800 749 0260 Projectors only Contact SAMSUNG WORLDWIDE If you have any questions or comments about Your Samsung TV please contact the SAMSUNG customer care center Samsung Electronics Canada Inc Customer Service 55 Standish Court Mississauga Ontario L5R 4B2 Canada Samsung Electronics America Inc 85 Challenger Road Ridgefield Park NJ 07660 1 800 SAMSUNG 726 7864 CANADA www samsung com 1 800 SAMSUNG 726 7864 U S A www samsung com 2013 Samsung Electronics Co Ltd All rights reserved BN68 04891A 00 QUICK START GUIDE QUU a BN68 05034A 00 Power on and start the initial setup Insert the batteries into the remote control Connect video devices Attach the TV to the Stand A Warning Screens can be damaged from direct pressure when handled incorrectly We recommend lifting the Don t Touch This Screen TV by the edges as shown Step 1 Attach the TV to the Stand Welcome to your new Smart TV The following instructions cover assembling connecting and setting up your new TV Make sure you have the accessories listed below Included in this box Stand Parts and Cables Ra Stand Mount Remote Control Cable manager Smart Touch Control iN ur 3 Batteries AAA x 2 IR extender Power cord 0 M4xL10 51 0 x8 Quz 60 647 9x4 9x4 M4 x L12 Screws Also included User manual regulat
58. the EX amp 8 DJ button and much more while enjoying media content Using the Quick Access Panel Use the buttons on the quick access panel to bring up the TV s MENU INFO or e Manual screens Note that the buttons that appear may vary depending on the operating mode of the Smart Touch Control with the TV only as a universal remote etc Turning on the TV Turn on the TV using the button on the Smart Touch Control or TV panel The product color and shape may vary depending on the model The first time you turn on your TV it will immediately start the initial setup The TV s Controller a small joy stick like button on the rear left side of the TV lets you control the TV without the remote control Open Smart Hub Open the menu Select a source Turn off the TV Remote control sensor When you use the Smart Touch Control the standby LED does not respond except when you press the 5 button SAMSUNG TV Controller The contro stick is located at the lower right corner on the back of the TV Switching Between Video Sources Press the SOURCE button to switch between devices connected to the TV For example to switch to a game console connected to the second HDMI connector press SOURCE button From the Source list select HDMI2 The connector names may vary depending on the product select Tools at the upper right corner of the source screen to access the followi
59. tion the finger is dragging When watching TV press and hold the touch pad for 2 seconds displays the channel list On some apps press and hold the touch pad for 2 seconds displays a list of functions available for the app Show Status and Notification Banner Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel that appears on the screen The status and alarm banner appears at the top of the screen For more information about using the status and alarm banner refer to e Manual SMART TV Features Status and Notification Recommended Press the RECOMM SEARCH button and then select the Recommended from the list on bottom of the screen This shows the current scheduled program and application recommendations Select a program that is currently airing to jump to the corresponding channel or a program that is scheduled to air to set up a Schedule Viewing setting Refer to e Manual SMART TV Features On TV for more information Select an application to launch Samsung Apps will launch if the selected application is not installed on the TV Refer to e Manual SMART TV Features Apps Samsung Apps for more information History Tap on RECOMM SEARCH and then select History from the list displayed at the bottom of the screen This displays an interactive list of recently accessed channels media content and applications Searching Press the RECOMM SEARCH button on the Smart Tou
60. uneven aging of PDP Displays that leave subtle but permanent burned in ghost images in the PDP picture To avoid this vary the programming and images and primarily display full screen moving images not stationary patterns or dark bars On PDP models that offer picture sizing features use these controls to view different formats as a full screen picture Be careful about the television formats you select and the length of time you view them Uneven PDP aging as a result of format selection and use as well as burned in images are not covered by your Samsung limited warranty e SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements conditions exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics SAMSUNG products and the requirements conditions exclusions and limitations contained herein SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada and in Canada on SAMSUNG products purchased in the United States for the warranty period originally specified and to the Original Purchaser only The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center Along with this Statement the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center Transportation to and from the Service Center is the resp
61. w There is no picture video e Check the cable connections Remove and reconnect all cables connected to the TV and external devices e Set the video outputs of your external devices Cable Sat Box DVD Blu ray etc to match the TV s input connections For example if an external device s output is HDMI it should be connected to an HDMI input on the TV e Make sure your connected devices are powered on e Be sure to select the correct input source e Reboot the connected device by unplugging it and then reconnecting the device s power cable The remote control does not work e Replace the remote control batteries Make sure the batteries are installed with their poles in the correct direction e Clean the sensors transmission window on the remote e Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control Program the Cable Set remote control to operate the TV Refer to the Cable Set Top Box user doesn t turn the TV on or off or adjust the manual for the SAMSUNG TV code volume amp Some functions and pictures shown in this manual are available on specific models only amp To keep your TV in optimum condition upgrade to the latest software Use the Update Now or Auto Update functions on the TV s menu Screen Menu Support Software Update Update now or Screen Menu gt Support gt Software Update gt Auto Update Mounting the TV on the Wall Using the Wall Mount Kit
62. y This function is only available when the USB device selected Universal Remote Setup Use to configure universal remote control settings Using the universal remote control you can control external devices connected to the TV such as a set top box Blu ray player and AV receiver Universal Remote Control Setup This TV has a universal remote control feature that lets you control cable boxes Blu ray players home theaters and other third party external devices connected to the TV using the TV s remote control SAMSUN i dvo Keep a distance of 2 inches at least between the IR Extender and the external device as the illustration shows Face the IR Extender toward the external device s remote control signal receiver Note that it should be no obstacle between IR Extender and external device The presence of an obstacle will interfere with the transmission of the remote control signal Add the External Device 1 Turn on the external device you wish to set up universal remote function for and then press SOURCE to bring up the Source screen 2 Select Universal Remote Setup from the top of the screen This initiates the universal remote setup process 3 Follow the on screen instruction and set up the universal remote control If it does not work set up the remote control by entering the model number manually Viewing the e Manual This TV has a built in e Manual that contains informat

owner`s manual

Contents

Download Pdf Manuals

Related Search

Related Contents