GB - Appendix CE User Manual GB Accumulators
Contents
1. PROTECTION Breathing protection only in case of fire 09 PHYSICAL AND CHEMICAL PROPERTIES The following indications are not relative to the pressure vessel but only to Nitrogen 9 1 Appearance e Physical phase gas e Colour without e Odour no odour warning properties 9 2 Physical and chemical properties e Molecular weight 28g e Melting point 210 C e Boiling point 196 C e Relative density gas 0 97 air l 10 STABILITY AND REACTIVITY 10 1 Conditions to avoid In general gas loaded accumulators shall not be subject to heavy temperature loads 10 2 Substances to avoid Avoid accumulator exposure to heavy corrosive media 10 3 Hazardous decomposition products Not known see 11 10 4 Other indications No other indications 11 TOXICOLOGICAL INFORMATION No indication for normal conditions In case of fire combustion products inflame mucosa more particularly those of respiratory tracts and can conduct if inhaled in high quantity to lungs oedema2. 12 ECOLOGICAL INFORMATION No indication 13 DISPOSAL CONSIDERATIONS Before any disposal gas into the accumulators shall be totally released Refer to the Instructions brochure or contact PARKER OLAERIndustries for this operation 14 TRANSPORT INFORMATION Proper shipping name Articles pressurized pneumatic containing non flammable gas UN Nr 3164 Class Div 2 2 Subsidiary risk None Hazard label 2 2 non flammable non toxic gas RID ADR Non subjected special disposition nb 594 IATA Packing group Strong outer packaging IATA Packing instruction 208 IATA Max quantity per package No limit IMDG Packing group IH IMDG Packing instruction Appendix IMDG Fastening According to Category A 15 REGULATORY INFORMATION Not included in 67 548 EC not classified as dangerous substance Sg Keep container in well ventilated place 23 Do not breath the gas 16 OTHER INFORMATION Conformity to PED 97 23 EC All national local regulations observed if applicable Catalogue HY10 4021 M1 EU GB Appendix MATERIAL SAFETY DATA SHEET according 1907 2006 CE Article 31 Product Gas Loaded Accumulator 01 PRODUCT AND COMPANY IDENTIFICATION 1 Product identification PARKER OLAERgas loaded accumulators are designed in accordance to the European Pressure Directive PED 97 23 EC or national regulations calculation codes ASME DNV ABS Per definition of EN 14359 2006 standard a gas loaded accumulato
3. im may not be aware of asphyxiation Remove victim to uncontaminated area Keep victim warm and rested Call a Doctor Apply artificial respiration if breathing stopped 4 3 Skin contact No indication 4 4 Ingestion No indication 4 5 Indications for the Doctor No indication 05 FIRE FIGHTING MEASURES 5 1 Suitable extinguishing media As neither the pressure vessel nor Nitrogen are flammable all known extinguishing means can be used 5 2 Specific hazardous due to combustion products Neither the pressure vessel nor Nitrogen are flammable and generate combustion products Because of potential gas formation due to the presence of rubber parts seals bladders etc see 5 4 5 3 Special protective equipment for fire fighters In confined space use self contained breathing apparatus 5 4 Specific indications Move away from the container and cool with water from a protected position As the rubber parts are degraded during fire the gas is released and no burst of the pressure vessel is expected Because of the possible combustion products generation arrange a security area protected from wind 06 ACCIDENTAL RELEASE MEASURES N A because the pressure vessel is tight 07 HANDLING AND STORAGE Gas loaded accumulators shall be stored in a clean and dry area by room temperature in non corrosive atmosphere Accumulators shall be kept away from corrosive media or media which degrade painting 08 EXPOSURE CONTROLS PERSONNAL
4. r is a hydraulic accumulator with separator between liquid and gas The separator can be a bladder a diaphragm or a piston During transport and storage PARKER OLAERaccumulators are filled with a gas pre charge storage between 2 and 5 bar maximum or filled with a gas pre charge above gas pre charge storage 2 Identification of the company Parker Hannifin Manufacturing France SAS Etablissement de Colombes 16 rue de Seine 92700 COLOMBES France www parker com acde 02 HAZARDS IDENTIFICATION e Main hazards Gas under pressure e Specific information regarding hazards for human being and environment R22 e There is no fragmentation danger related to the accumulator in transport or storage condition Nitrogen may cause asphyxiation in high concentration which could be nevertheless only possible in a non ventilated space by high accumulation of Nitrogen it could only be imaginable in case of intentional boring of a high quantity of accumulators 03 COMPOSITION INFORMATION ON INGREDIENTS N CAS Substance Preparation 07727 37 9 Nitrogen Other Components Impurities Contains no other components or Impurities which will influence the classification of the product Catalogue HY10 4021 M1 EU CE User Manual GB Accumulators 04 FIRST AID MEASURES 4 1 General indication See 4 2 4 2 Inhalation Nitrogen in high concentration may cause asphyxiation Symptoms may include loss of mobility consciousness Vict
Download Pdf Manuals
Related Search