Comfort Plus Baby Monitor Instruction manual
Contents
1. Comfort Plus Baby Monitor Instruction manual Digital Baby Monitor Hush Comfort plus indd 1 7 12 11 20 35 50 Baby Monitor Thank you for purchasing this baby monitor Please read the instructions and warnings carefully before use to ensure the safe and satisfactory operation of this product Contents Important safety information 3 Centigrade to Fahrenheit 11 Your baby 4 Parent to parent paging E Instructions for use 5 Talk to your baby 11 Check the package contents 5 12 Setting up the parent unit 5 Baby feed timer 12 Setting up the baby unit 6 Feed 13 cresi 6 Sound sensitivity 14 Using your baby monitor 7 LOW 14 Battery low 7 Simple solutions 15 7 1 15 Setting the clock 7 General information 16 Baby alert 8 Changing the batteries 16 LUNADY serres ieee 9 17 Temperature 10 Weee Directive 17 Hush Comfort plus indd 2 7 12 41 20 35 51 Use of this e supervision of a child Keep the product and all its parts out of reach of small children Batteries are small objects Replacement of the bat2. a mislaid parent unit At the baby unit l Press and hold the Page button for 2 seconds and then release The parent unit will emit a tone At the parent unit 1 When the page tone sounds you can silence it by pressing any button on the parent unit 2 If you wish you can speak to your partner in the baby s room Press and hold the Talk button and speak into the front of the parent unit Release the Talk button to hear what is said in the baby s room again Talk to your baby You can speak to your baby from the parent unit perhaps as assurance that you are on your way At the parent unit l Press and hold the Talk button and speak into the front of the parent unit Release the Talk button to hear your baby again Note You will not be able to hear your baby until you release the Talk button Hush Comfort plus indd 11 71211 20 35 58 Night light The baby unit has a night light providing comfort and reassurance for your baby You control the night light rom the parent unit At the parent unit l Press the Menu button and then use the Up Down buttons to scroll to Night Light Press the OK button 2 On will be displayed Press the OK button to turn the night light on or the Menu button to exit You will hear a confirmation beep and Saved will be briefly displayed A light bulb icon will appear in
3. Never place the baby unit inside the cot bed or playpen Make sure the unit cords and mains adaptor are out of reach of the baby and other young children Hush Comfort plus indd 6 Never place either the parent or baby unit on antique or polished surfaces When you have set up your baby monitor you will be able to hear the sounds in your baby s room through the speaker on the parent unit The green noise indication light will also flash with the sound volume level Note If the connection between the parent and baby unit is broken at any time the Link light on the parent unit will flash the parent unit will beep and the green noise indication light will no longer react to any sounds To re establish the link please refer to page 15 Volume You can adjust the volume of the sounds that you can hear through the parent unit by using the up and down buttons on the front of the parent unit This will not affect the sensitivity of your baby monitor only the volume of the sounds that you can hear 7 12 11 20 35 56 Using your baby monitor Battery charge indicator and battery low warning The parent unit can operate for a maximum of 10 hours when it is out of the charger pod but this depends on the level of charge in the batteries and if any of the other parent unit functions have been used such as the Talk feature The battery charge level is indicated by the battery icon on th
4. damage caused by excessive voltage or lightning If this product has been tampered with in any way the warranty shall be considered null and void This guarantee does not affect your statutory rights WEEE Directive WEEE Directive Directive 2002 96 EC of the European Parliament and Council of 27th January 2003 on waste electrical and electronic equipment At the end of the product s lifecycle you should not throw this product into the normal household waste but take it to a collection point for the recycling of electrical and electronic equipment The WEEE symbol below on the product user manual and packaging indicate this E Please contact your local authority if you need more information about the collection points in your area For more information telephone Envirowise on 0800 585794 Hush Comfort plus indd 17 7112111 20 36 00 Hush Comfort plus indd 18 7 12 11 20 36 00 Hush Comfort plus indd 19 7 12 11 20 36 01 Helpline 0161 925 1981 12 11 20 36 01
5. e You may need to manually re establish the link Turn both units off and then press and release the Power button on the baby unit Press and hold the Power button for 2 seconds on the parent unit e After a few seconds the green Link light will come on You can t hear your baby on the parent unit and the Link light is still glowing steadily e Check that the volume on the parent unit is turned up e You may need to increase the sensitivity of the parent unit See page 14 The baby monitor is making a high pitched ear piercing noise e This can happen if the baby and parent unit are too close to each other Move the parent unit further apart from the baby unit e Clean the charging contacts with a soft dry cloth If you are experiencing any difficulty after making the above checks please call the helpdesk for further assistance Helpdesk The helpdesk is open from 9 00am to 5 30pm Monday to Friday excluding bank holidays and can be contacted on 0161 925 1981 Hush Comfort plus indd 15 7 12 11 20 36 00 _ General information Changing the parent unit batteries The parent unit is supplied with s 2 x AAA Nickel Metal Hydride Rechargeable Batteries To change the batteries please refer to page 5 of this guide e Only use recommended batteries or those of an equivalent type e Batteries are to be inserted with the correct polarity Follow the diagram
6. in the battery compartment e DO NOT short circuit the supply terminals e Promptly remove exhausted batteries from the parent and baby unit and replace if the operating times have become reduced over time e Remove the batteries from the parent and baby unit if they will not be used for an extended period of time e DO NOT attempt to recharge non rechargeable batteries e Dispose of dead batteries properly e DO NOT mix old and new batteries or batteries or batteries of different types i e alkaline standard Hush Comfort plus indd 16 DO NOT incinerate used batteries DO NOT dispose of batteries in a fire as they may explode or leak DO NOT attempt to open the battery outer casing Batteries are harmful if swallowed so keep away from young children 7 12 41 20 36 00 Product guarantee This product has warranty of 12 months and is therefore guaranteed to be free from defects in materials and workmanship during that period If you experience a problem within that time simply call the Helpdesk on 0161 925 1981 If your problem cannot be solved by our Helpdesk you will need to return your product to the place it was purchased Remember to take your receipt as proof of purchase as it must be produced before the warranty can be honoured This product must have been used only for the intended purpose and not been subjected to wilful or accidental damage This warranty does not cover
7. parent unit This is a really useful feature if the volume of your parent unit is turned down and you are just using the noise indication light to monitor the noise levels in your baby s room At the parent unit 1 Press the Menu button and then use the Up Down buttons to scroll to Sound Alert Press the OK button 2 On will be displayed Press the OK button to turn the alert on or the Menu button to exit without changing the setting You will hear a confirmation beep and Saved will be briefly displayed To turn the baby alert off follow the steps above Off will be displayed Press the OK button You will hear a confirmation beep and Saved will be briefly displayed To change the alert tone volume 1 Press the Menu button and then use the Up Down buttons to scroll to Sound Alert Press the OK button 7 12 11 20 35 57 2 Use the Up Down buttons to scroll to Wolume Press the OK button 3 Use the Up Down buttons to change the volume level Press the OK button You will hear a confirmation beep and Saved will be briefly displayed Note 5 blocks on the display maximum volume Lullaby You can soothe your baby to sleep by a gentle lullaby from the baby unit There are 5 lullabies to choose from You can switch the lullabies on and off from the parent and
8. temperature range You can set the upper and lower temperature limits of your baby monitor so that you are alerted if the temperature in the baby s room goes above or below your pre set range The temperature displayed on the parent unit will flash and an alert if set will sound At the parent unit l Press the Menu button and then use the Up Down buttons to scroll to Temperature Press the OK button 2 Use the Up Down buttons to scroll to Set Range and press the OK button The current upper temperature range is displayed e g Up limit xx Hush Comfort plus indd 10 3 Use the Up Down buttons to change the upper temperature level Press the OK button You will hear a confirmation beep and Saved will be briefly displayed 4 The lower range limit is now displayed e g Low limit xx 5 Use the Up Down buttons to change the lower temperature level Press the OK button You will hear a confirmation beep and Saved will be briefly displayed Setting the temperature alert You can set your parent unit to give an additional double beep warning to alert you that the temperature has moved outside of the pre set range At the parent unit l Press the Menu button and then use the Up Down buttons to scroll to Temperature Press the OK button 2 Use the Up Down buttons
9. the display of the parent unit to remind you that the baby unit night light is on To turn the night light off again follow the steps above Off will be displayed Press the OK button You will hear a confirmation beep and Saved will be briefly displayed The light bulb icon will disappear Baby feed timer If your baby is in a routine of regular feeding intervals you can set the baby monitor to alert you when your baby s feeds are due You can choose to Set the time of the day or night 24 hour clock that your baby s next feed is due or Set the interval between your baby s feed start times e g every 3 hours 30 minutes Don t forget to include the time it takes to feed your baby Note You need to set the time and date of your parent unit to use the baby feed timer See page 7 Set the first or next feed time At the parent unit 1 Press the Menu button then use the Up Down buttons to scroll to Feed Time Press the OK button 2 Set Time is displayed Press the OK button 3 Hour is displayed and a number between 00 and 23 for the hours of the day in 24 hour clock Use the Up Down buttons to scroll to the hour of your baby s feed Press the OK button Hush Comfort plus indd 12 71211 20 35 58 4 Minute is displayed and a number between 00 and 59 for the minutes of an hour
10. they will play for approximately 15 minutes l Press the Menu button and then use the Up Down buttons to scroll to Lullaby Press the OK button 2 Play is displayed Press the OK button to play the lullaby or use the Up Down buttons to scroll to Select New and press the OK button Hush Comfort plus indd 9 3 The number of the current lullaby is displayed Use the Up Down buttons to scroll to the lullaby that you would like to play or select Play All Press the OK button You will hear a confirmation beep and Saved will be briefly displayed 4 Lullaby is displayed Press the OK button twice The lullaby will begin to play on the baby unit To stop playing the lullaby press the OK button twice when you are in Lullaby mode Note The lullabies will stop playing automatically after approximately 15 minutes 7 12 11 20 35 57 Temperature It is very important for your baby s health to ensure that they are kept at a safe temperature This includes the room temperature baby s temperature baby clothing and bedding contact your local health authority to ensure that you are aware of the current guidelines Your baby monitor can help by displaying the current room temperature on the baby unit and parent unit It can even be set to alert you if it falls outside of a set range Changing the
11. Use the Up Down buttons to scroll to the minutes past the hour for your baby s feed Press the OK button You will hear a confirmation beep and Saved will be briefly displayed Set the interval for following feeds At the parent unit follow the steps 1 4 above then 5 Set Time is displayed Use the Up Down buttons to scroll to Set Interval Press the OK button 6 Hour is displayed and a two digit number for the hours between your baby s feeds Use the Up Down buttons to scroll to the hour between your baby s feeds eg 03 Press the OK button 7 Minute is displayed Use the Up Down buttons to scroll to the minutes after the hour between your baby s feeds e g 30 Press the OK button You will hear a confirmation beep and Saved will be briefly displayed Note Please remember to switch the feed alarm on as detailed in the next section Turn the feed alarm on At the parent unit follow the steps 1 7 beginning on the previous page and then 8 Set Interval is displayed Use the Up Down buttons to scroll to Alarm Press the OK button 9 On will be displayed Press the OK button to turn the feed alarm on or the Menu button to exit You will hear a confirmation beep and Saved will be briefly displayed An alarm bell icon will appear in the display of the par
12. e briefly displayed Note 5 blocks on the display maximum sensitivity Hush Comfort plus indd 14 Low power In normal use your baby unit will have a constant low level communication with the parent unit at all times With the Hush baby monitor you can choose to reduce this level of communication or power usage so that the baby unit only communicates with the parent unit when there are sounds in your baby s room higher than the set sensitivity level Note It may take up to 8 seconds for the baby unit to transmit a signal to the parent unit to establish digital communication when low power mode is switched on At the baby unit l To switch low power mode on slide the switch underneath the baby unit to On 7 12 41 20 35 59 Simple solutions If you are experiencing problems with your baby monitor there are some quick and easy checks you can do to help solve the problem The parent and baby units Will not power on e Please check that you have correctly installed the batteries in the parent unit and that the mains power for the baby unit and parent unit charging pod is connected and switched on The Link light on the parent unit is flashing the noise indication light is not functioning and you cannot hear sounds from your baby s room e You may have moved out of range of the baby unit Move the parent unit closer and wait 5 seconds for the Link to re establish
13. e parent unit display If the battery level is low the battery icon will begin to flash and you will hear a warning beep You should return your parent unit to the charger pod to re charge the batteries You can still use your parent unit whilst it is charging in the charger pod Check that the red charging light is flashing when your parent unit is in the charger pod Language Your baby monitor can display information in several different languages To change the display language l Press the Menu button and then use the Up Down buttons on the front of the parent unit until Language is displayed Press the OK button Hush Comfort plus indd 7 2 Use the Up Down buttons to scroll to your chosen language and press the OK button to confirm Saved will be displayed briefly Your chosen language will now be set Clock The parent unit can display the current date and time in either 12 or 24 hour clock the default setting is 24 hour clock You will need to set the clock before you can use the baby feed timer feature To set the time l Press the Menu button and then use the Up Down buttons to scroll to Clock Press the OK button 2 Set time is displayed Press the OK button 3 Year is displayed Use the Up Down buttons to scroll to the correct year Press the OK button 4 Month is displayed Use
14. ent unit to remind you that the baby feed alarm is set To turn the feed alarm off again follow the steps above Off will be displayed Press the OK button You will hear a confirmation beep and Saved will be briefly displayed The alarm bell icon will disappear To change the alert tone volume 1 At step 9 above use the Up Down buttons to scroll to Volume and press the OK button 2 Use the Up Down buttons to change the volume level Press the OK button You will hear a confirmation beep and Saved will be briefly displayed Note 5 blocks on the display maximum volume Press any button on the parent unit to silence the alarm Hush Comfort plus indd 13 71211 20 35 59 Sound sensitivity Some babies are louder than others You can customise the sound sensitivity of your baby monitor to suit your baby Set the sensitivity to High for a quiet sleeper with a soft cry and set to Low if your baby tends to make a noise whilst sleeping or can make quite loud noises before they are truly crying At the parent unit l Press the Menu button and then use the Up Down buttons to scroll to Sensitivity Press the OK button 2 Level will be displayed Use the Up Down buttons to change the sensitivity setting and press the OK button You will hear a confirmation beep and Saved will b
15. ome 5 Plug the charger pod mains adaptor into a mains power socket and switch on 6 Place the parent unit in the charger pod and charge for a minimum of 13 hours before first use or if it has not been used for a long time The red power light on the parent unit will flash when the batteries are charging Note The parent unit cannot be used without rechargeable batteries even if it is placed in the charger 7 Press and release the Power button on the front of the parent unit to switch it on 7 12 11 20 35 55 Setting up At the baby unit l Your baby unit does not require batteries to function but we recommend that you install them Should there be power cut your baby unit can then switch to the back up non rechargeable battery power 2 Remove the battery cover on the back of the baby unit with a crosshead screwdriver Insert 4 x AAA alkaline batteries taking care to note the and markings and position the batteries the correct way around Replace the battery cover and re tighten using the crosshead screwdriver Note Do NOT use rechargeable batteries in the baby unit 3 Connect the power lead to the bottom of the baby unit and plug the mains adaptor into a mains power socket and switch on 4 Press and release the Power button to switch on Note The baby unit should be placed about m to 1 5 m away from the baby s cot or playpen on a flat and stable surface
16. teries must be done by adults Keep it dry Avoid exposure to precipitation humidity and liquids which could all affect the product circuitry Do NOT leave it in high temperatures as electronic devices and plastic parts may warp in heat Do NOT leave it in low temperatures as moisture can form inside the product which may damage the circuit board Do NOT use harsh chemicals cleaning solvents or detergents to clean the product Wipe with a damp not wet soft cloth to clean Hush Comfort plus indd 3 Important safety information Your baby monitor should be treated with care The information below has been provided in the interest of safety and will help you to enjoy this product and the benefits it brings for many years is no substitute for personal attention and Do NOT attempt to open the product Unauthorised handling of the device may damage it and will void your warranty Only use the power supply that came with the product Using an unauthorised power supply will invalidate your guarantee and may irrecoverably damage the product Radio signals transmitted between the Parent and Baby unit may cause interference to hearing aids Do NOT use your baby monitor near emergency intensive care medical equipment if you have pacemaker fitted or during an electrical storm 7 12 11 20 35 51 Your baby monitor Noise indication light Display Talk Menu Vol
17. the Up Down buttons to scroll to the correct month Press the OK buttons 5 Day is displayed Use the Up Down buttons to scroll to the correct day Press the OK button 7 12 41 20 35 56 6 Hour is displayed Use the Up Down buttons to scroll to the correct hour Press the OK button 7 Minute is displayed Use the Up Down buttons to scroll to the correct minute Press the OK button You will hear a confirmation beep and Saved will be briefly displayed The time and date will now be displayed on the parent unit To set 12 or 24 hour clock 1 Press the Menu button and then use the Up Down buttons to scroll to Clock Press the OK button 2 Use the Up Down buttons to scroll to Hour Format Press the OK button 3 I2Hrs will be displayed when 24 hour clock is already set Press the OK button to change to 12 hour clock or the Menu button to exit without changing the setting If 12 hour clock is set 24Hrs will be displayed for this step Press the OK button to change to 24 hour clock Note When 12 hour clock is set a small a will be displayed for AM and a small p for PM Hush Comfort plus indd 8 Baby alert You can set your parent unit to give a warning beep if the noise levels in your baby s room activate the light on the
18. to scroll to Temp Alert and press the OK button 3 Alert On will be displayed Press the OK button to turn the alert on or the Menu button to exit without changing the setting You will hear a confirmation beep and Saved will be briefly displayed To turn the temperature alert off follow the steps above Alert 7 12 11 20 35 57 Off will be displayed Press the OK button You will hear a confirmation beep and Saved will be briefly displayed Changing from Centigrade to Fahrenheit Your monitor is pre set to display the temperature in Centigrade but you can change this to Fahrenheit At the parent unit l Press the Menu button and then use the Up Down buttons to scroll to Temperature Press the OK button 2 Use the Up Down buttons to scroll to Degree F Press the OK button to select Fahrenheit or the Menu button to exit without changing the setting You will hear a confirmation beep and Saved will be briefly displayed To change back to Centigrade follow the steps above Degree C will be displayed Press the OK button You will hear a confirmation beep and Saved will be briefly displayed Parent to parent paging This is a useful feature if one parent is in the baby s room and needs to contact the other parent You can also use this feature to find
19. ume down Move down a in the menu OK Power on off Press and release to power on Press and hold to power off Microphone Night light Mains adaptor socket underneath Hush Comfort plus indd 4 Power on off light Flashes when the batteries are charging Link light Power on off Press and release to power on Press and hold to power off 7 Volume up Move up in the menu Microphone am 75 Speaker Battery compartment for non rechargeable batteries not supplied Temperature sensor Page Low power switch Press and hold for underneath 2 seconds to Page the Parent unit 4 7 42 11 20 35 55 Instructions for use Check the package contents The package contains e Parent unit receiver with belt clip e charger pod with fixed mains adaptor e 2x 800mAh NiMH rechargeable batteries e Baby unit sender e mains adaptor e travel bag e 1 instruction manual Setting up At the parent unit 1 Remove the belp clip by pulling downwards 2 Remove the battery cover on the back of the parent unit 3 Insert the 2 x AAA Nickel Metal Hydride rechargeable batteries provided taking care to note the and markings and position the batteries the correct way around Replace the battery cover Hush Comfort plus indd 5 4 Replace the belt clip by sliding into place until it clicks h
Download Pdf Manuals
Related Search