HORYZONHD V3 MANUAL
Contents
1. Traditional Chinese Set the date Set the time in 24 hour time system Set the time for auto screen off When there is no button operation within certain time the screen will be off automatically to save power Press any key to turn it on Auto power off Off 30s 60s 120s 300s Set the time for auto power off When there is no operation within certain time it will shut down automatically Motion detecting High Medium Low Set the detecting sensitivity Light source frequency 50Hz 60Hz Set according to the power grid frequency to avoid the interference while working under a fluorescent lamp If it is working under the nature light then this setting can be passed over Video output Formatting NTSC PAL Set the format if you are outputing the video to TV Select the right format accoding to state video system Format the memory card Restore factory defaults Reset all the settings to the default Upgrade Upgrade programs Upgrade programs a Please make sure the battery power is sufficient or there is external power supply b Please copy the upgraded files to the memory card Please do not change the name of the files Then insert the memory card into the card slot c Turn on the recorder and enter Setup menu gt Upgrade Press Confirm to enter Upgrade interface then select Yes and press Confirm to start upgrading d After it finishes upgrading the syste2. When the timelapse recording is started the icon will be shown on the standby screen b Press the Video button to start timelapse recording The red icon shows it is recording The screen does not show record time in this mode Press the Video button again to stop recording 1 frame per second x 10 frames per second x 30 frames per second x 60 frames per second c This function is designed for recording slow moving scene such as flowers blooming plants growing etc The record files in this condition take up less storage space If the record files are to be played back make sure a specialized play software is available for playback frame by frame or slow playback Before using this function make sure the Motion detection in system menu is closed 3 Motion detection a When the motion detection is started the icon will be shown on the standby screen Press Video button to record and the icon will keep flashing ready for trigger event b When a trigger event is detected it will start recording The red Video icon will be shown on the screen c Record time will not be shown in this mode If the moving object stays still for 30 minutes it will stop recording and go back to detecting mode waiting for next trigger Press the Video button again can stop the motion detection recording and go back to the standby mode d According to the moving object s ratio in the visual field there are three levels of trigger sensitiv
3. the card until it clicks b When taking out the memory card jog the card until it clicks then the card will pop out Notice Please do not take out the memory card while in recording photo taking or USB mode otherwise the card or the files in it could be damaged 3 Turn on off a When the power is turned on the machine will automatically boot and go into standby mode b when the power is turned off the machine will automatically shut off 4 Installing the device a Install the holder into the slot on the back of the device b Invert the device and fix the holder on the windshield or other spots with a capacious view and can be direct mounted c Both the angle of the holder and the lense are adjustable Video recording 1 Normal recording mode a Press the Video button to start recording The red icon on the screen shows it is recording and the redord time shows on the bottom of the screen b The record files will be saved in sections as the time pre set in video sections in the video menu for example if the setting is 15 minutes a section then the system will create a new record file and keep recording when the recording time reaches 15 minutes The files will be named after the number of the order they are created c The video section setting cannot be closed or removed Two sequential files are connected seamlessly without losing a single frame which can keep the video smooth and intact 2 Timelapse recording a
4. B plug DC input Universal serial data Multifunction input Mono audio channel USB 2 0 high speed interface communication HDMI output C TYPE interface data format HDMI 1 2 About 52 8 x 43 x 16mm length width thickness Dimensions not including the Lense Weight About 38 g without av out cable plugged Operation temperature 10 C 40 C A Do not use this cam with UHF radio Control without the UHF shield kit
5. Safety Caution Notice m 1 The electronomagnetic field of specific frequency may affect the audio and video of this product E 2 If the static or electromagnet lead to the failure of the data transfer please break the connectionor restart the application program and reconnect the communication cable USB etc E 3 Please do not put this product in an air tight place like bookcase or closet in case of the electric shock or fire caused by excess heat E 4 Please do not put the product near fire E 5 lease keep the mainboard module at least 5cm from other electronic equipments on your plane to avoid inter interference Precautions for using this recorder E 1 Please check the recording first before starting to record E 2 Please be noted that this product is not dustproof or waterproof E 3 Please do not touch the lense with dirty hands E 4 Please keep the product from water If there is water getting inside the product might be damaged and cannot be repaired in some situations E 5 Please do not hold the product face toward the sun or other strong light which may cause failure Package contents Main body FOXTECH HD Driving Video Recorder HoryzonHD AV cable User mannual Product sketch map Menu 04 43 Camera Playback j Record MENU PLAY PHOTO VIDEO ii h T wn a USB interface Icropnone o ov albany a O HDMI interface i Photo trigger Gna aen Video trigger Gna P
6. ile will be protected and leaves less room for recording When the memory card is full the loop recording will stop 3 Fuzzy picture a Please check if there is any dirt or fingerprint on the lense Wipe the lense gently with a dry and soft cloth if the it turns dirty E About playback 1 Cannot playback a Please check if the memory card is inserted properly b If there is no file stored in the memory card it can not play back c lf the name of the file has been changed it can not play back d lf the file has been modified it can not play back 2 White dots in the picture a lf recording in dark place the dust particles may reflect light and cause the white dots in the picture b Please check if there is any dust on the lense Foxtech HoryzonHD V3 User manual Please read this manual carefully before using the product Specifications Items Contents Image sensor 1 3 2 CMOS Fixed focus f 2 7mm angle of view 140 Lense Up and down adjustment angle 90 Exposure Auto exposure control White balance Auto white balance Format JPEG Pixel 2592x1944 H 264 video compression Size 16 9 1920x1080 30fps 4 3 1440x1080 30fps 16 9 1280x720 60fps 1280x720 30fps Video section 5min 10min 15min 30min Bitrate 8Mbps 12Mbps 15Mbps High speed Micro SD TF card Storage Maximun support 32GB LCD glass 2 0 TFTLCD Pixel 960x240 screen AV out USB Compatible with standard MINI US
7. ity to select High sensitivity It will be triggered to record the moment a distant and small moving object is detected Secondary sensitivity Starting to record when an average sized moving object in a moderate distance is detected Least sensitivity Starting to record when a close and small moving object is detected e Make sure the device is fixed and stable when using this function or it will be affected and fail to detect the motion of the object properly when the car rocks f When the Motion detection and the Timelapse recording are both functioning press the Video button can only start Motion detect recording 4 Loop recording a Loop recording functions in the Regular recording mode The recorder can keep recording without changing the memory card b When the memory card is full it will delete the earliest video files automatically and keep recording c Rules for automatically files deletion The protected files will not be deleted This should be set manually in Playback Photo Protection The earliest files will be deleted first It deletes one file each time For example FILE0001 MP4 FILEOO02 MP4 FILEQ059 MP4 When the memory card is full the system will delete FILE0001 first and create FILEOQO60 MP4 and then keep recording If the room is still not enough for recording it will delete FILE002 MP4 until the spared recording time is long enough for one section Then FILE0061 MP4 will be created and thus l
8. m will restart automatically Output vidoes and photoes to HD TV a Connect the device with the HD TV set through an HDMI cable not included in this product b Make sure there is HDMI sign on the HDMI cable c A transfer line is needed to transfer the HDMI C TYPE to HDMI A TYPE when connecting to the HDMI interface of HD TV set Connecting to PC a Connect the device to PC b When the screen shows the Connecting to PC interface press up down button to select YES Connect the device to PC as a removable disk Operations like Playback Copy Delete and so on can be done on the computer Solutions for common problems E Video recording Photo taking 1 Cannot record video or take photoes a Please check if the memory is full if it is delete the unnecessary videos and photoes b Please check the settings in the menu Make sure the Timelapse recording and Motion detecting are set right c Please check if the Continuous shooting and Auto shooting are set right 2 Stop in the middle of the recording a Please check if the memory card is Micro SD card or Micro SDHC card that the device supports b To ensure normal recording Micro SD card or Micro SDHC card must be high speed c The transmission grade of the card should be Class 4 at least d In car mode please mount the device and fix it levelly before connecting the auto power If the power is connected first it will start recording before the device is placed properly The record f
9. on the pictures and videos can be done on the device 2 Support 1920x1080 1440x108 1280x720 output Multi functional USB interface 1 The interface is compatible with standard MINI USB 5P cable using to connect PC 2 Output AV and input auto power supply Charging indicator 1 Recharging the indicator turns red after full the Green indicator on 2 If no external power imput the charging indicator will not shine Status indicator 1 In standby mode the blue indicator on 2 While recording the blue indicator flashes rapidly 3 While taking photoes the blue indicator flashes slowly 2 Display icons continuous shooting Ws Ws ig p time eem Gs ls 2011 10 01 10 08 photo pixel a aman memory card p o 20 5GB 1080p 4L 00 0GB es _ _ 080p ps 720p pH spare capacity video resolution Auto shooting Cs 5 Ho Cho Ceo 4d Gs 0 2011 10 01 10 08 _ a ta T an n 20 5GB 1080p AL T a aas image quality motion detection amp 00 00 00 date Qs amp 2011 10 01 10 08 _ one mw TS 20 5GB 1080p AL timelapse recording Tok TOK 30K Gok 2011 10 01 10 08 1080p AL mamma 2011 10 01 10 08 pe ai battery display upward downward acceleration left right acceleration 20 5GB 00 10 01 1080p aL o recording time Operation guide 1 Power supply 2 Insert and take out memory card a Insert the card with the side with golden contacts down then jog
10. oop recording RIR 420X285mm 128o Metro R 142 5X84mm f the time of the old file is longer than the video section then the whole file will get deleted d When it is Timelapse recording or Motion recording if the memory card is full then it will stop recording or loop recording 5 Video menu settings Menu setting Function description 16 9 Full HD 1080p 1920X1080P 30fps 4 3 Full HD 1440X1080P 30fps 16 9 Full HD PADS 1280X720P 60fps 16 9 Full HD 720p 1280x720p 30fps AL 1080ps Resolution Maximum Minimum Average metering Central weighted metering When in continious recording the video file will be Video saved in sections as the time sectioning set here When enabling this setting the date and time will be shown on the up left corner of the screen Time stamp Close 1 sec frame Set the space of time for capturing Timelapse 10 sec frame 1 frame video recording 30 sec frame 60sec frame When enabling this function it can recycling memory space and loop record When the Loop memory card is full the system recording will delete the earliest file automatically and continue recording When enabling this setting it Microphone will record the video and sound synchronously Photo taking 1 Normal photo mode Press Camera button to take pictures The icon will be shown on the screen while shooting 2 Continuous cap
11. ower Cord 5 C Video out Memory card slot 04 Te LCD screen 43 0 Lense or horyzonhd V3 has auto on function no power button is necessary Photo and Video remote triggering will be made possible by using foxtech new 3 way cam switch 1 Function introduction Menu button 1 In standby mode press and hold down this button for 3 seconds to enter the menu setting state 2 In menu setting status short press this button can browse the taps while long press it for 3 seconds can go back to the parent menu and continue the long press to exit 3 In playback mode short press this button will stop playback video Wihle browsing the files short press this button can enter the Action menu and long press canl exit playback mode Playback button gt 1 In standby mode short press will enter playback status 2 While playing back press this button to play or stop the video 3 In menu setting status press this button to confirm Camera button a 1 lIn standby mode press this button to take pictures or increase the digital zoom 2 In menu setting mode press this button to up select Video button 1 lIn standby mode press this button to record video or reduce the digital zoom 2 In menu setting mode press this button to down select HDMI interface 1 The interface is C TYPE Connecting the recorder to a HD display device with a special cable the video data can be transferred to the device and the operations
12. toes at one hit Shoot 1 photo every 3 Shoot 1 photo every 5 seconds Shoot 1 photo every 10 seconds Shoot 1 photo every 30 seconds Shoot 1 photo every 60 seconds When enabling this setting the date and time will be shown on the up left of the photoes Time stamp 1 Main Menu settings a In standby mode long press the Menu button and the Main Menu interface will pop out Video menu Camera menu J Setup menu Photo size Burst mode Auto shooting e Menu Time stamp Seales b Shortly press Menu button to browse Camera Video and Setup tabs c Press Camera button and Video button to select items Press Confirm button to enter set state Press Camera button and Video button to set and press Confirm button to confirm and go back E E Photo size Burst mode 5M jjj Auto shooting Off Time stamp EE eee Video size Quality AL Metering mode H8 Video section Time stamp Time lapse 15 Minutes On Off vi Language BEIG Time English 2011 01 01 00 00 Auto screen off Off Auto power off Off Motion Detection Off 2 Menu setting items Items Language Menu setting English Function description Set English as the system language Language Auto screen off Simplified Chinese Set the system language as Simplified Chinese Traditional Chinese 2011 01 01 00 00 Off 30s 60s 120s Set the system language as
13. ture mode When enabling this function the related icon will be shown on the screen Press Camera button and it will take photoes continuously as the setting in the menu 3 Auto shooting When enabling this function the related icon will be shown on the screen Press Camera button and it will take photoes as the pre set intervals 4 Motion detecting shooting a When enabling Motion detecting function the related icon will be shown on the screen Press Camera button to start motion detecting photo taking With the icon keeps flashing it will start shooting the moment it is triggered b When it is triggered by the detected object it will start shooting The red camera icon will be shown on the screen c lf the object stands still for 30 seconds it will stop shooting and keep detecting until next triggering Press Camera button again can stop Motion detecting shooting and go back to the standby mode d Make sure the device is fixed and stable when using this function or it will be affected and fail to detect the motion properly when the car rocks Notice When the Motion detection Continuous shooting and Auto shooting are all open press the Camera button can only start Motion detecting shooting 5 Camera setting menu Setting Function description Gs Photo pixel 2592x1944 Gs Photo pixel 2048x1536 a Shoot 3 photoes at one hit Continuous q f shooting P s Shoot 5 photoes at one hit Shoot 10 pho
Download Pdf Manuals
Related Search