2-Serial/1-Parallel Port PCI Adapter
Contents
1. installation For Windows 2000 1 At the Found New Hardware Wizard click Next 2 Select Search for a suitable driver for my device Mar 07 3 MN2000000080 recommended and click Next 3 Check Specify a location uncheck the other boxes then click Next 4 Insert the Driver CD type in D PCI_IO nm9xxx 2000 then click OK Change D to match your CD ROM driver letter 5 Click Next and Finish 6 Restart Windows to complete the installation For Windows XP 1 At the Found New Hardware Wizard select Install from a list or specific location Advanced then click Next 2 Insert the Driver CD check Include this location in the search uncheck the other box type in D PCI_IO nm9xxx XP then click OK Change D to match your CD ROM drive letter 3 If the Hardware Installation window pops up click Continue Anyway then Finish Our driver has been thoroughly tested for stability and compatibility 4 Repeat steps 1 3 three more times 5 Restart Windows to complete the installation Mar 07 4 MN2000000080 For 1 For 1 Mar 07 Windows Server 2003 At the Found New Hardware Wizard select Install from a list or specific location Advanced then click Next Insert the Driver CD check Include this location in the search uncheck the other box type in D PCI_IO nm9xxx 2003 then click OK Change D to match your CD ROM drive letter If the Hardware Installation window pops up click Continue Anyway2. then Finish Our driver has been thoroughly tested for stability and compatibility Repeat steps 1 3 three more times Restart Windows to complete the installation Windows Vista At the Found New Hardware Wizard select Locate and install driver software recommended Click on I don t have the disc Show me other options Select the option Browse my computer for driver software advanced Insert the driver CD check Include subfolders type in D PCI_IO nm9xxx Vista32 then click Next Change D to match your CD ROM drive letter 5 MN2000000080 5 If the system prompts the user informing the drivers are not signed select the option Install this driver software anyway 6 Click on Close to complete the driver installation To Verify Windows Driver Installation 1 Right click My Computer then click Manage Click Device Manager 2 Click on the plus sign in front of Ports COM amp LPT two MosChip PCI Serial Port and one MosChip PCI Parallel Port should be displayed 3 Double click Multifunction adapters MosChip PCI Multi I O Controller should be displayed Change COM Port Address Some serial devices need a specific COM port in order to work If your serial devices works properly do not change this settings For Windows 2000 XP Server 20003 Vista Installation 1 From the Device Manager window double click Ports COM amp LPT then double click the MosChip PCI Serial Port you want to change 2 C
3. 2 Serial 1 Parallel Port PCI Adapter User Manual Ver 2 00 All brand names and trademarks are properties of their Respective owners Mar 07 1 MN2000000080 Features and Benefits Features Supports Standard Parallel Port SPP Enhanced Parallel Port EPP amp Enhanced Capability Port ECP Parallel data transfer rate up to 1 5MB Sec Supports 2 x 16550 Fast UART serial Ports Serial data transfer rate up to 115200bps Easy Plug and Play Automatically selects IRQ amp I O address Supports Windows 2000 XP Server 2003 Vista Bus PCI 2 1 32bit 33MHz Connectors 2 x DB9 male serial connectors 1 x DB25 female parallel connector Package Contents 1x 2 Serial 1 Parallel Port PCI Adapter 1x Bracket with two DB9 male serial ports 1x Driver CD 1x User Manual Mar 07 2 MN2000000080 System Requirements Windows 2000 XP Server 2003 Vista Available PCI slot Hardware Installation 1 Turn Off the power to your computer 2 Unplug the power cord and remove your computer s cover 3 Remove the slot bracket from an available PCI slot 4 To install the card carefully align the card s bus connector with the selected PCI slot on the motherboard Push the board down firmly 5 Replace the slot bracket s holding screw to secure the card 6 Replace the computer cover and reconnect the power cord Driver Installation Please make sure the board is installed before proceeding with driver
4. lick Settings tab and click Advanced Mar 07 6 MN2000000080 3 Click the down arrow that is next to the COM Port Number box select a COM port that is not in use then click OK 4 Click OK then close Device Manager to save the changes Follow steps 1 4 again to change the other one serial port if needed Change Parallel Port Address Some parallel devices need a specific parallel port in order to work If your parallel devices works properly do not change this settings For Windows 2000 XP Server 20003 Vista Installation 1 From the Device Manager window double click Ports COM amp LPT then double click the MosChip PCI Parallel Port 2 Click Port Settings tab 3 At the LPT Port Number box click the down arrow and select an LPT port that is not in use 4 Click OK then close Device Manager to save the changes Mar 07 7 MN2000000080
Download Pdf Manuals
Related Search