Ilumipanel 180 IP Optic 15/30 RGBWA User Manual Rev
Contents
1. Technical Support Email Eutech chauvetlighting eu World Wide Web www chauvetlighting eu Technical Support Email uktech iluminarc com World Wide Web www chauvetlighting co uk Technical Support Email servicioOiluminarc com mx World Wide Web www chauvet com mx Outside the U S United Kingdom Ireland Mexico or Benelux contact the dealer of record Follow their instructions to request support or to return a product Visit our website for contact details llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 23 Technical Information Technical Specifications Dimensions and Length Width Height Weight Weight 28 6 in 728 mm 9 9 in 252 mm 21 in 533 mm 89 0 Ibs 40 3 kg Note Dimensions in inches rounded to the nearest decimal digit Electrical Power Supply Type Range Voltage Selection Switching internal 100 240 V 50 60 Hz Auto ranging Parameter 120 V 60 Hz 230 V 50 Hz Consumption 614 W 5A 610 W 2 7 A Power I O Input Output Connectors Hard wired N A Cord plug Open ended N A Light Source Type Power Current Lifespan LED 5 W 700 1000 mA 50 000 hours Color Quantity Red 44 Green 40 Blue 48 White 24 Amber 24 Photometric Parameter 15 Panel 30 Panel Illuminance 5 m 1241 Lux 287 Lux Beam angle 122 21 4 Field angle 23 35 39 3 Thermal Max External Temperature Cooling System Fan assisted convection via 104 F 40 C Integrated Cooling Enhancement M DMX I O Connectors Connector Type Cha2. Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Edition Notes E j M i i IN i JA fu 1E JINJITINI JA i l t E W M i B G Edition Notes The Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 covers the description safety precautions installation programming operation and maintenance of the Ilumipanel 180 IP Optic 15 30 RGBWA ILUMINARC released this edition of the Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 in November 2015 Trademarks The ILUMINARC logo the IEUMINARC name and all other trademarks in this document related to services or products by ILUMINARC are trademarks owned or licensed by ILUMINARC its affiliates or subsidiaries Any other product names logos brands company names trademarks featured or referred to within this document are the property of their respective trademark holders Copyright Notice The entire content of this document except where applicable and unless otherwise noted is solely owned by ILUMINARC a wholly owned trademark of Chauvet Sons Inc Copyright 2015 ILUMINARC All rights reserved Electronically published by ILUMINARC in the United States of America Manual Usage ILUMINARC authorizes its customers to download and print this manual for professional information purposes only ILUMINARC expressly prohibits the usage copy storage distribution modification or printing of this manual or its content for any oth
3. OMX SAAD AGGKesS 12554007 MAR EO VP a O de LEO ae 12 A 8 K E O K O O 13 o A 13 A t coo h ha T 13 Whites Seting zezdola iia 13 Reset o Factory Set S ii miki oe aate lk ia ios 13 Ment Maat 14 DV 15 ARG FUEL ct 15 ARO e am A A E 15 LES A A EE O O O a aa a 15 ARG 2 Dada 16 PAN Go a NAA E A 16 ARG BD sedet no nan dan 16 A A eo ae seeaatatae rede 16 SPECIAL Mai 16 SPEC zoo oa DA AM A en we ee ke 17 Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 i Table of Contents ILUMINAR 5 Technical Information iia 18 ProducuiMaltenance ais ida 18 A O O O 18 Troubleshooting GUJE R P P a la 19 PROMSE ainia adidas 20 HELD TDS CLA PP R a O AA SAATA 22 A A mm m a m m mmm aa a 22 LED BDONG Mata a O O O tetas 22 Color Rendering Index CRM cies sacarina amme aula tl ull 22 ASULAS FPLOC COUPE aii 23 Technical Specialios 24 llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 ait Introduction 1 Introduction This icon indicates useful although non critical information This icon indicates important installation or configuration information Failure to comply with this information may prevent the product from functioning correctly This icon indicates critical installation configuration or operation information Failure to comply
4. source life and increased mechanical wear Always dry the external optics To clean a product follow the below recommendations and glass surfaces carefully Disconnect the product from power after cleaning them Wait until the product has cooled Use a vacuum or dry compressed air and a soft brush to remove dust collected on the product Clean all external glass optics and glass surfaces with a mild solution of glass cleaner or isopropyl alcohol and a soft lint free cotton cloth or a lens cleaning tissue Apply the solution directly to the cloth or tissue and drag any dirt and grime to the outside of the lens Gently polish the external glass surfaces until they are free of haze and lint Product Repairs a ILUMINARC strongly advises you against attempting any repairs to this product unless you technical are an authorized ILUMINARC technician problems after ILUMINARC presents the information contained in the Troubleshooting Table as a guide a Tob only In most cases opening the products housing will invalidate its warranty unless there is a contact ILUMINARCO written indication to the contrary Technical Support 18 llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 i y nm A Jm uu N f M j J tit J i y E Ls Technical Information lA ot Troubleshooting Guide Symptom Cause s Action s Dirty lens assembly Clean the product regularly Lo
5. 180 IP Optic 15 30 RGBWA User Manual Rev 13 E p AIN EA ILUMINARG Table of Contents Table of Contents LOG CEO y POE taan 1 What Is In the Flight Case 1 Unpacking Instructions nnnnerrnnneeneennnnnneneennnnnennna P KKK KK RR P KKK KRKA PAK anna 1 A ila lna otaku osad odtahu a alia tata ada aus kaani 1 EHEC OV CMO 0 AM ba ouha dada Gadna A eat n ds M 1 5121154 NES a a TS AAA E 2 Personal GCL side osada tag tees Dh nana e kel ato tds 2 MOUNTING AAHAS 2 Power and VNO aa 2 V t 2 2 PrOQUCT DESCFIDPUON MAMA 3 FOME A alal E aa 3 A i maa palat p o 3 Produc OV CIV am a A 4 Product DIMENSIONS ADAM AAA ME i m t 5 SAASTA ON aa a a E hb do ah o R CRo oo o 6 MOUNN oratoria oo ide 6 A O SE e A 6 A Oo r 6 AS ROW a n oun na 7 Power COnSUMPUION st ii tia a ta tii 7 KS lt A S O L 7 A PP O A 7 DIMELO ota 8 A et A 8 Sigal P ROOT R O O O O O Oh 8 Protocol Connect temata Gece a aiamaad as 8 A M K 9 DMX 8701 8116 01 lt 00 APRA Aa O O 9 EUMIC ON A A o tr att annua web A 10 CWA Hmmm a Ae os 10 WV DIVO Calorias 11 ED SU AUN OTN asa arse a hs ce ca 12 aros A A a t 12 llumicode Panel Description 12 Control OA o o oo 12 POG rama A A A 12 NS 12
6. are connecting this product to the proper voltage as per the specifications in this manual or on the product s sticker Power Consumption To determine the power requirements for the Ilumipanel 180 IP Optic 15 30 RGBWA refer to the label affixed to the side of the product or refer to the Technical Specifications chart in this manual The listed current rating indicates the maximum current draw during normal operation AC Plug The Ilumipanel 180 IP Optic 15 30 RGBWA comes with an un terminated power input cord for hardwiring during installation Use the table and the illustration below to wire a plug Connection Wire US Screw Color US Wire Europe IP67 Pin AC Live i AC Neutral AC Ground Green Yellow Green Green Yellow 3 Power Wiring You can connect the bare ended IP67 rated AC power cable from the product to an IP67 rated power connector or IP67 rated junction box If using junction boxes make sure to use IP67 rated conduit for surface installations From To fuse other panel boxes Distribution Conduit Distribution Box Box Operation The units must be linked using O DMX cable in a daisy chain serial fashion To comply with the ElA 485 standard no more than 32 units should be connected on one daisy chain without using a DMX optically isolated splitter Doing otherwise may result in deterioration of the digital DMX signal A r
7. 5 30 RGBWA When selecting an installation location consider ease of access to the product for operation programming adjustments and routine maintenance Make sure that the location where you are mounting the product can support its weight Please see the Technical Specifications section of this manual for the weight requirement of this product Mounting Points Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 ILUMINARC Always connect AN the Ilumipanel 180 IP Optic 15 30 RGBWA to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire the Ilumipanel 180 IP Optic 15 30 RGBWA toa rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel serves only as a 0 to 100 switch AN connect the Illumipanel 180 IP Optic 15 30 RGBWA product to a power line with the proper voltage and freguency as perthe specifications in this manual or on the product s sticker Never connect Make sure to The listed current rating indicates the maximum current draw during normal operation bury the power or signal distribution boxes make sure that they are IP67 rated or greater If you choose to Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 Operation AC Power The Ilumipanel 180 IP Optic 15 30 RGBWA has an auto ranging power supply that works with an input voltage range of 100 240 VAC 50 60 Hz Make sure you
8. ERS and select any DMX personality 2 Make sure to rearrange the DMX addresses of all products in the current DMX universe to avoid address overlapping DMX Starting Address 1 Goto DMX 2 Select a starting DMX address 001 512 Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 i INAINI A IDC A ILUMINARC Operation Static Colors DIM1 is the 1 Go to STATIC A feria st tne 2 Select a color or effect Red Green Blue White Amber or Strobe is the slowest 3 Select a color value 000 255 or a strobe frequency 0 20 Dimmer This setting gives the user four different options to simulate the dimming curve of an incandescent lighting product 1 Goto DIMMER 2 Select a dimmer curve OFF or DIM1 4 Procedure DIMMER Description OFF Dimmer curve 1s linear with fader DIM1 Non linear fastest DIM2 Non linear fast DIM3 Non linear slow DIM4 Non linear slowest Color 1 Go to SETTINGS gt COLOR 2 Select the color method OFF RGB TO W UC Procedure OFE When the RGB faders are all set to 255 the output 15 maximum RGB TO W When the RGB faders are all set to 255 the output 1s the selected White color see Whites Setting UC When the RGB faders are all set to 253 the output matches the same color output of previous versions of this product Whites Setting 1 Goto CALIB Select a white color WHITE 1 11 or RGB TO W Select an RGB color Red Green or Blue Confi
9. Product order code 13180002 The RDM2go which includes a built in ilumicode addresser along with many other useful features 1s now available The Ilumicoode addresser is required for product configuration sold separately llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 3 Product Overview 316 Stainless Steel Gland Nuts Locking Adjustment Plate 7 6 o ooooooolocoocoocoocool a o ooooooolocoocoocooocool UL Locking Pin W DMX Antenna Power In Gore Valve Signal In Out 4 Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 LUMINARC Product Description Product Dimensions 28 2 in 716 mm AS S T 5 9 9 in 252 mm Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 5 Operation LUMINARC 3 Installation Make sure to 7 AN mount this Mounting product away from any flammable Before mounting this product read and follow the safety recommendations indicated in the material as indicated in Safety Notes section the Safety Notes i Orientation Always mount this product in any safe position while making sure there is adequate room for ventilation configuration and maintenance Installation The Ilumipanel 180 IP Optic 15 30 RGBWA has twelve 12 mounting points on the base of the product to secure to almost any surface ILUMINARC recommends following the general guidelines below when mounting the Ilumipanel 180 IP Optic 1
10. Rev 13 19 ILUMINARG Technical Information Photometrics Filename Ilumipanel 180 IP Optic RGBWA 30 degree at full single panel Manufacturer ILUMINARC Luminaire llumipanel 180IP Optic RGBWA 30 degrees Luminaire Cat 13180001 Lamp 22 Red 20 Green 24 Blue 12 Amber 12 White Lamp Output 1 lamp s rated Lumens lamp 1500 Max Candela 6 068 5 at Horizontal 0 Vertical 3 Input Wattage 297 3 Luminous Opening Point Test 20101207RGBWA30 Test Lab lluminarc R amp D Optics Laboratory Photometry Type B CIE Class Direct Cutoff Class Full Cutoff Polar Candela Distribution 180 1700 160 1509 1409 wA 10 20 30 d 45 H Flood Summary Efficiency Lumens Horizontal Spread Vertical Spread Field 10 59 7 868 1 39 39 7 Beam 50 30 7 459 9 21 1 21 7 Total 705 1 057 Illuminante at a Distance Center Beam FC Beam Width 1 1ft ZAL 1 1ft 2 2 ft 665 66 fc 166 42 Fc 3 0 12 0 15 0 13 0 73 96 fc 41 61 fc 26 63 fc 18 49 fc Wert Spread 21 7 MhHoriz Spread 21 1 Photometics Pro 1 3 2 copyright 2003 2008 by Solutions Inc Reported data calculated from manufacturer s data file based on IES recommended methods 20 3 4ft 4 6ft 5 TFt 6 9ft Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 3 4 ft 4 5ft 5 6ft 6 F k ILUMINARC Technical Information Filename Ilumipanel 180 IP Optic RGBWA Polar Candela Distribution single hea
11. d 15 degree at full 57 000 18071707 160 150 140 Manufacturer ILUMINARC gt Luminaire llumipanel 180 IP Optic RGBWA single head 15 degrees 4 667 iir Luminaire Cat 13180000 33 500 Lamp 22 Red 20 Green 24 Blue 12 Amber 33 333 110 12 White Lamp Output 1 lamp s rated Lumens lamp 7960 mani Max Candela 66 976 5 at Horizontal 75 Vertical 5 0 90 Input Wattage 301 2 11 167 ego Luminous Opening Point Test 20101207RGBWA15 nj Test Lab lluminarc R amp D Optics Laboratory 50 Photometry Type B HRGB CIE Class Direct 55 833 Ego Cutoff Class Full Cutoff 67 000 VAD 10 20 308 409 B 45H Flood Summary a Horizontal l Efficiency Lumens Spread Vertical Spread Field 10 46 2 3675 8 25 9 25 1 Beam 50 19 4 1547 4 11 9 12 4 Total 64 9 5 168 4 Illuminance at a Distance Center Beam FC Beam Width 2 0 2 881 56 fc D 6ft 0 6ft 720 39 fc 1 3ft 1 2ft a pit 320 17 fc 1 9ft 1 9ft 12 0 180 10 fc 2 6ft 2 5ft 15 0 115 26 fc 3 2ft 3 1ft 18 0 80 04 fc 3 9ft 3 7ft M Vert Spread 12 4 B Horiz Spread 11 9 Photometics Pro 1 3 2 copyright 2003 2008 by jSolutions Inc Reported data calculated from manufacturer s data file based on IES recommended methods Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 21 Technical Information UIVIIINAKL LED Disclaimer LED Life ILUMINARC rates LED lifetime based on lumen depreciation of 70 of the or
12. ecommends limiting the total length of the DMX cable from the first unit controller to the last unit to 300 455 m 985 1 500 ft Disconnect the product from the AC power before opening it The signal cable must match or exceed the electrical characteristics of the Belden 9841 cable for EIA RS 485 applications You may also use 6415 be or CAT6 LAN cable ILUMINARC DMX Linking You may link the Ilumipanel 180 IP Optic 15 30 RGBWA to a DMX controller using a standard DMX serial connection or W DMXTM If using other DMX units compatible with the Ilumipanel 180 IP Optic 15 30 RGBWA you can control each product individually with a single DMX controller DMX Modes The Ilumipanel 180 IP Optic 15 30 RGBWA uses the standard DMX data connection for ARC1 ARC1 D ARC2 ARC2 D ARC3 ARC3 D ARC FULL REMOTE SOLID SPECIAL 1 and SPECIAL 2 Refer to the Introduction chapter for a brief description of these modes and the Operation chapter to learn how to configure the Ilumipanel 180 IP Optic 15 30 RGBWA to work in these modes The DMX Values section will give you detailed information regarding the above mentioned DMX modes The highest possible starting address for each DMX mode are as follows DMX Mode DMX Address DMX Mode DMX Address DMX Mode DMX Address ARC FULL ARC3 SOLID 512 ARC1 ARC3 D SPECIAL1 503 ARC1 D 509 ARC3 S 506 SPECIAL2 504 Signal Wiring To provide signal for any of the I
13. efore shipping the product Be prepared to provide the model number serial number and a brief description of the cause for the return The user must clearly label the package with a Return Merchandise Authorization Number RMA ILUMINARC will refuse any product returned without an RMA Once you receive the RMA please include the following information on a piece of paper inside the box Your name Your address Your phone number The RMA A brief description of the problem Be sure to pack the product properly Any shipping damage resulting from inadequate packaging will be the customer s responsibility As a suggestion proper FedEx packing or double boxing is the shipping method ILUMINARC recommends USA WORLD HEADQUARTERS General Information ILUMINARC Address 5200 NW 108th Avenue Sunrise FL 33351 Contact Us Voice 954 923 3680 Fax 800 544 4898 EUROPE General Information Chauvet Europe BVBA Address Stokstraat 18 9770 Kruishoutem Belgium Voice 329 388 93 97 General Information Chauvet Europe Ltd Address Unit 1C Brookhill Road Industrial Estate Pinxton Nottingham UK NG16 6NT Voice 44 0 1773 511115 Fax 44 0 1773 511110 MEXICO General Information Chauvet Mexico Address Av Santa Ana 30 Pargue Industrial Lerma Lerma Mexico C P 52000 Voice 52 728 285 5000 Technical Support Voice 800 762 1084 Email support iluminarc com World Wide Web www iluminarc com
14. el 180 IP Optic 15 30 RGBWA User Manual Rev 13 ARG Operation SPECIAL 2 Channel Function Value Percent Setting 0 100 0 100 Amber 0 100 000 U 010 No function 011 U 035 R 100 G 036 U 060 R Down G 061 U 085 R 0 G 086 U 110 R 0 G Down G G G lt 0 0 Up 100 100 Down 111 135 R Up 136 160 R 100 161 185 R 100 G 186 U 210 R Down G Down 21 215 White 1 3 200 K 216 220 White 2 3 400 K 22 225 White 3 4 200 K 226 230 White 4 4 900 K 23 235 White 5 5 600 K 236 240 White 6 5 900 K 24 245 White 7 6 500 K 246 250 White 8 7 200 K 25 255 White 9 8 000 K 8 Strobe No function 006 U 255 Slow Fast 000 009 Off 010U 069 Speed 1 Fastest 9 Dimmer Speed 070U 129 Speed 2 130U 189 Speed 3 190 255 Speed 4 Slowest Color Macros 100 Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 17 Technical Information IL LIMBS 5 Technical Information Product Maintenance To maintain optimum performance and minimize wear the user should clean the products frequently Usage and environment are contributing factors in determining the cleaning frequency As a rule the user should clean the products at least twice a month Dust build up reduces light output performance and can cause overheating This can lead to reduced light
15. er purpose without 1ts written consent Document Printing For better results print this document in color on letter size paper 8 5 x 11 inches double sided If using A4 paper 210 x 297 mm configure your printer to scale the content of this document to A4 paper Intended Audience Any person in charge of installing operating and or maintaining the lumipanel 180 IP Optic 15 30 RGBWA should read the Guide that shipped with it and this manual in their entirety before installing operating or maintaining this product Disclaimer ILUMINARC believes that the information contained in this manual is accurate in all respects However ILUMINARC assumes no responsibility for any error or omissions in this document ILUMINARC reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of ILUMINARC to notify any person or company of such revision or changes This does not constitute in any way a commitment by ILUMINARC to make such changes ILUMINARC may issue a revision of this manual or a new edition of it to incorporate such changes Document Revision The Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 supersedes all previous versions of this manual Please discard any older versions of this manual you may have whether in printed or electronic format and replace them with this version Author Date Editor Date Daniel Couppe 5 1 15 N Ilumipanel
16. f them that do not correspond with the menu map Skip them as they do not work with the RGBWA only output products llumicode The Ilumipanel 180 IP Optic 15 30 RGBWA needs an external controller the Ilumicode addresser to change its configuration Ilumicode Panel Description Button Function lt MENU gt Exits from the current menu or function Enables the currently displayed menu or sets the lt ENTER gt currently selected value into the selected function Navigates upwards through the menu list and increases P lt UP gt the numeric value when in a function Navigates downwards through the menu list and lt DOWN gt 8 i PERO decreases the numeric value when in a function Turns the unit on The unit will turn off automaticall UP lt POWER gt m y O after 30 seconds of inactivity MENU Y ENTER DOWN Control Options You can set the Ilumipanel 180 IP Optic 15 30 RGBWA start address in the 001 512 DMX range This allows for the control of up to 51 products in the 10 channel Special 1 personality Programming Carry out all the programming procedures indicated below from the control panel Refer to the Menu Map section to learn how the menu options relate to each other Use lt ENTER gt and lt MENU gt to change levels in the Menu Map This 1s equivalent to move right and left respectively Use lt UP gt and lt DOWN gt to move vertically within the Menu Map options DMX Personality 1 Go to P
17. gure the color value 0 255 Repeat steps 3 and 4 for the other RGB colors to obtain a white color ls all gt Repeat steps 2 to 5 for the other white colors Reset to Factory Settings 1 Go to SETTINGS gt RESET 2 Select an option YES NO llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 13 Operation Menu Map Main Level DMX PERSON CALIB DIMMER STATIC SETTINGS ILUMINAR 001 512 N A Sets the DMX starting address 3 channel RGB control ARC1 D 4 channel RGB control dimmer 4 channel RGBW control ARC2 D 5 channel RGBW control dimmer 5 channel RGBWA control ARC3 D 6 channel RGBWA control dimmer ARC FULL NA acota control dimmer color macro strobe REMOTE Allows using the ILUMICON unit SOLID 1 channel dimmer SPECIAL 1 10 channel RGBWA per module 9 channel RGBWA control dimmer color macro strobe SPECIAL 2 dimmer speed WHITE 1 11 Determines the white balance for the color macros 0 255 RGBTOW Determines the white balance when RGBTOW 15 active F Dimmer work in linear mode gt gt aA sA 2 S S 3 O gt gt gt p j p Sins 6 EEE A AB AA 5 mm BUN u m N A Dimmer works in non linear mode from fast to slow 0 255 Configures the static color and effect WARM STRB OFF Maximum output unbalanced white COLOR White output is as per CALIB gt RGBTOW settings Output matches that of product s previous versions RESET NO YES Rese
18. iginal output with data provided by the manufacturer of the LED Data from the manufacturer of the LED are not independently verified or measured by ILUMINARC When the product is operating in optimal environmental conditions the LED lifetime is rated to be 50 000 to 70 000 hours by the LED manufacturer LED Binning LED manufacturers sort LEDs into bins based on variances in color output intensity and the frequency at which the semiconductor operates ILUMINARCO strives to hold its LED manufacturers to the highest standards of binning to optimize consistency in output from product to product However the availability of a single bin cannot be guaranteed With that in mind ILUMINARC has developed a rigorous control system to seek the best achievable consistency in color and output Color Rendering Index CRI CRI is an industry standard method to compare properties of different types of light sources There are known limitations and inconsistencies related to CRI Results may vary depending on the environmental factors involved For this reason the US Department of Energy DOE states that CRI should be considered as one point of reference among others in evaluating white LED products and systems The following 1s an excerpt of recommendations from the DOE 1 Identify the visual tasks to be performed under the light source If color fidelity under different light sources 1s critically important for example in a space where co
19. l all use their default values This The Ilumipanel 180 IP Optic 15 30 RGBWA products can work with a standard DMX decos that all products controller The channel assignments will depend on the chosen personality see the Menu Map section and the DMX address assigned to each product see Programming section The figure below illustrates how to connect the DMX controller to the Ilumipanel 180 IP Optic 15 30 RGBWA products Power 2 Signal To 5555 other mazas fixtures DMX512 A Controller llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 9 Operation The RDM2go which includes a built in ilumicode addresser along with many other useful features is now available To assign individual DMX addresses to each product you must connect the llumicode addresser to each product individually The Ilumicode will not work via wireless You must hardwire the llumicode directly to the Ilumipanel 180 IP Optic 15 30 RGBWA when programming the product ILUMINARCO suggests that you connect no more than 20 products together at one time with this controller and keep the total distance to less than 60 m 197 ft Otherwise you might need to use an optically isolated signal amplifier ILUMINARG ILUMICON The Ilumipanel 180 IP Optic 15 30 RGBWA can also work with the ILUMICON controller instead of a standard DMX con
20. lor or fabric comparisons are made under both daylight and electric lighting CRI values may be a useful metric for rating LED products 2 CRI may be compared only for light sources of equal CCT This applies to all light sources not only to LEDs Also differences in CRI values of less than five points are not significant e g light sources with 80 and 84 CRI are essentially the same 3 If color appearance is more important than color fidelity do not exclude white light LEDs solely on the basis of relatively low CRI values Some LED products with CRIs as low as 25 still produce visually pleasing white light 4 Evaluate LED systems in person and if possible on site when color fidelity or color appearance are important issues Source DOE publication PNNL SA 56891 January 2008 22 llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 DO NOT write the RMA directly on the box Instead write it on a properly affixed label ILUMINARCO reserves the right to use its own discretion to repair or replace returned product s Always keep the original box and all packaging material as you will need those to ship the unit back to ILUMINARCO fy Technical Information Returns Procedure The user must send the merchandise prepaid in the original box and with its original packing and accessories ILUMINARC will not issue call tags Call ILUMINARC and request a Return Merchandise Authorization Number RMA b
21. lumipanel 180 IP Optic 15 30 RGBWA you can connect the bare ended IP67 rated signal cable from the product to two IP67 rated signal connectors DMX in and DMX Out or use an IP67 rated junction box In this case make sure to use IP67 rated conduit Protocol Connectivity The Ilumipanel 180 IP Optic 15 30 RGBWA uses USITT DMX 512 Protocol The procedure below illustrates the recommended connection method 1 Common Shield 2 Data In Black 3 Data In White 4 Data Out Green PA 51 p kp oo A Y Signal J Signal unction Junction t A box Conduit box s Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 LUMINARC Operation Controllers The products in the Ilumipanel 180 IP Optic 15 30 RGBWA can operate with a standard DMX controller the ILUMICON controller or the Ilumicode addresser The sections below will show you how to connect these products to the corresponding controllers The instructions to operate these products with each of the above controllers are in the Operation chapter of this manual You may also choose to connect these controllers via W DMX M If you have not configured the Refer to the W DMX transmitter instructions provided with your transmitter and the W DMX starting DMX M Calibration section of this manual to use this method address and DMX mode for each product DMX Controller they wil
22. nnel Range IP Gland Nut N A 1 3 4 5 6 7 9 10 Ordering Ilumipanel 180 IP Optic 15 30 RGBWA 13180004 CONFORMS TA UL STD 1573 CERTIFIED TO US CSASTD 6222 No 166 24 3144482 Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 ILUMINARC Technical Information LUMINARC
23. ol over the wired DMX cables Operation W DMX Calibration You can run the lumipanel 180 IP Optic 15 30 RGBWA without DMX cabling using the W DMXTM option This product can operate in W DMX mode up to 300 m 900 feet from the W DMX transmitter For wireless operation the W DMX receiver in the Ilumipanel 180 IP Optic 15 30 RGBWA must be paired with the W DMX transmitter Use the following instructions to operate 2 AS 10 Using the Ilumicode set the personality and the DMX address to the Ilumipanel 180 IP Optic 15 30 RGBWA Refer to the programming section of the Operation chapter of the User Manual Disconnect power and the Ilumicode from the product Open the cover next to the W DMXTM Antenna by unscrewing the 6 Allen Screws using a 3mm angled Allen Key Reconnect power to product Press and hold the W DMX button until the Green LED stops flashing Disconnect power to the product for approximately 10 seconds Reconnect power to product Locate the product by using the W DMXM transmitter Refer to the W DMXTM transmitter instructions provided with your transmitter Upon locating the product wirelessly close the cover Tighten the Allen Screws uniformly by alternating between opposite screws to insure a tight seal Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 11 Operation 4 Operation When you scroll through the menu options you will see many o
24. r publication or manual lt SET gt A button on the product s control panel Settings A product function or a menu option MENU gt Settings A sequence of menu options 1 10 A range of menu values from which to choose in a menu Yes No A set of two mutually exclusive menu options in a menu ON A unique value to enter or select in a menu Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 1 mn p A GE Ji NP a SA YA There are no user serviceable parts inside this product Any reference to servicing you may find from now on in this User Manual will only apply to properly certified ILUMINARCO technicians Do not open the housing or attempt any repairs unless you are certified to do so Please refer to all applicable local codes and regulations for the proper installation of this product Keep this manual for future consultation If you sell this product to another user make sure that they also receive this manual In the unlikely event that your llumipanel 180 IP Optic 15 30 RGBWA may require service please contact ILUMINARC Technical Support Safety Notes Please read all the following safety notes carefully because they include important information on how to install use and maintain this product safely Personal Safety Avoid direct eye exposure to the light source while the product 15 on Always disconnect this product from its power source before servicing Always connec
25. t this product to a grounded circuit to avoid the risk of electrocution Do not touch this product s housing when operating because it may be very hot Mounting and Installation This product 15 for outdoor use and can be submerged IP67 However do not submerge deeper than 1 m for more than thirty 30 minutes CAUTION When transferring product from extreme temperature environments e g cold truck to warm humid ballroom condensation may form on the internal electronics of the product To avoid causing a failure allow product to fully acclimate to the surrounding environment before connecting 1t to power This product weighs 89 lbs 40 3 kg Always ask for help when mounting this product to avoid personal injuries or damage to the unit Make sure there are no flammable materials close to this product while operating When hanging this product always secure it to a fastening device using a safety cable Power and Wiring Always make sure that you are connecting this product to the proper voltage as per the specifications in this manual or on the product s sticker Never connect this product to a dimmer pack Make sure that the power input cable is not cracked crimped or damaged Never disconnect this product by pulling or tugging on the power input cable Operation The maximum ambient temperature is 104 F 40 C Do not operate this product at a higher temperature In case of a serious operating problem stop
26. troller Please refer to the ILUMICON User Manual to learn how to use this controller with the Ilumipanel 180 IP Optic 15 30 RGBWA products The following figure illustrates how to connect the ILUMICON controller to the Ilumipanel 180 IP Optic 15 30 RGBWA gt m To other fixtures ILUMICON Controller Ilumicode The Ilumicode addresser version 2 2 or higher is required to program the settings on the Ilumipanel 180 IP Optic 15 30 RGBWA The following diagram shows how to connect the Ilumicode addresser to this product This connection will control multiple products at the same time In addition all connected products will be assigned to the same DMX address Important The Ilumicode must be used to configure this product The Ilumicode can be purchased separately through your Iluminarc sales representative eo M To Power other fixtures 1 Gnd Black clip 2 Data Green clip 3 Data Red clip Signal Connector Ilumicode Addresser Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 ILUMINARG The llumicode Addresser is required to send DMX addressing and personality information to the fixture Once W DMX AN has been enabled you cannot use the llumicode to make changes to the Ilumipanel 180 IP Optic 15 30 RGBWA Changes made via the llumicode should be done prior to enabling W DMX The W DMX takes priority contr
27. ts unit to factory default settings Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 NARG Operation DMX Values ARC FULL 2 Red 000 255 0 100 4 0000 255 0 100 000 010 No function 011 U 035 R 100 G Up B 0 036 U 060 IR Down G 100 B 0 061 U 085 R 0 G 100 B Up 086 U 110 R 0 G Down B 100 111 U 135 R Up G 0 B 100 136 U 160 IR 100 G 0 B Down 161 U 185 R 100 G Up B Up 186 U 210 R Down G Down B 100 5 Color Macros 211 215 White 1 3 200 K 216 220 White 2 3 400 K 22 225 White3 4 200 K 226 230 White4 4 900 K 231 235 White5 5 600 K 236 240 White6 5 900 K 241 245 White7 6 500 K 246 250 White8 7 200 K 251 255 White9 8 000 K 000 005 No function 006 255 Slow Fast 000 U 009 Off 010 U 069 Speed 1 Fastest 7 Dimmer Speed 070U 129 Speed 2 130 189 Speed 3 190 U 255 Speed 4 Slowest ARC 1 3 Blue 000 255 0 100 ARC1 D Channel Function O value PercentSeting 4 Blue 000 255 0 100 llumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 15 Operation ARC2 D 1 OT R O ARC 3 White 000 255 0 100 5 Amber 000 255 0 100 ARC 3 D 1 N 6 SOLID Amber 000 255 0 100 1 Dimmer 000 255 0 100 SPECIAL 1 1 O O J O CI A OD N O Module 2Amber 000 255 0 100 Ilumipan
28. using this product immediately Ilumipanel 180 IP Optic 15 30 RGBWA User Manual Rev 13 ADC ipti ARC Product Description 2 Product Description The Ilumipanel 180 IP Optic 15 30 RGBWA is a high intensity wash product used to light a variety of both indoor and outdoor applications The Ilumipanel 180 IP Optic 15 30 RGBWA consists of a steel base and two adjustable panels The base contains the power supply and the control unit The panels are attached to the adjustable steel arms that come from the base The DMX and power input and output are located on the power supply Features 1 3 4 5 6 7 9 or 10 channel DMX 512 LED array light Operating modes 1 channel Dimmer 3 channel RGB control 4 channel Dimmer RGB control 4 channel RGBW control 5 channel Dimmer RGBW control S channel RGBWA control 6 channel Dimmer RGBWA control 7 channel Dimmer RGB color macros strobe dimmer speed 9 channel Dimmer RGBWA control color macros strobe dimmer speed 10 channel RGBWA control per module two modules W DMX Dual Vector Array LED panel positioning Five distinct dimming curves High power 5 W 700 1 000 mA RGBWA LEDs IP67 with 316 stainless steel hardware Gore valve Cast and extruded aluminum with Integrated Cooling Enhancement Options Ilumicode addresser required for product configuration Installed non changeable optical system 15 lenses Product order code 13180001 30 lenses
29. w light intensity Misaligned lens assembly Install adjust lens assembly properly AA Faulty LED Return for service to Iluminarc Group of LEDs not illuminating Faulty LED driver Return for service to Iluminarc i E Faulty LED Return for service to Iluminarc One LED does not illuminate Faulty LED driver Return for service to Iluminarc Faulty LED board Return for service to Iluminarc No LEDs illuminate Faulty LED driver board Return for service to Iluminarc Excessive circuit load Check total load placed on the electrical Circuit breaker fuse keeps r tripping blowing Short circuit along the power wires Check for a short in the electrical wiring Check for power on power outlet Product does not power up Check power cord Return for service to Iuminarc Check Control Panel and unit addressing Check DMX cables Prode Check polarity switch settings on the controller ic Loose DMX cables Check cable connections Return for service to Iluminarc Return for service to Iluminarc Use only DMX compatible cables Install terminator as suggested Long cable low level signal Install an optically coupled DMX splitter DMX sienaliproblems right after the product with the strong signal Too many products Install an optically coupled DMX splitter after unit 32 or before Interference from AC wires Keep DMX cables separated from power cables or fluorescent black lights llumipanel 180 IP Optic 15 30 RGBWA User Manual
30. with this information may render the product partially or completely inoperative damage third party equipment or cause harm to the user The term DMX used throughout this document refers to the USITT DMX512 A transmission protocol What Is In the Flight Case One Ilumipanel 180 IP Optic 15 30 RGBWA One Power Input Cable Bare Ended One Data Input Output Cable Bare Ended One W DMX Receiver Warranty Card Quick Reference Guide Unpacking Instructions Immediately upon receiving a product from ILUMINARC carefully unpack the flight case Check the contents to ensure that all parts are present and that they are in good condition Claims The carrier is responsible for any damage incurred during shipping Therefore if the received merchandise appears to have been damaged during shipping the customer must submit the damage report and any related claims to the carrier not ILUMINARC The customer must submit the report upon receipt of the damaged merchandise Failure to do so in a timely manner may invalidate the customer s claim with the carrier For other issues such as missing components or parts damage not related to shipping or concealed damage the customer must make claims to ILUMINARC within seven 7 days of receiving the merchandise Text Conventions Convention Meaning 1 512 A range of values in the text 50 60 A set of mutually exclusive values in the text ILUMICON UM The name of anothe
Download Pdf Manuals
Related Search