GL7-DISP (Display Module)
Contents
1. GND terminal If the ground cable is not connected sufficient performance may not be obtained C This explains installation when extending cables After the main module s face cover is mounted 1 Connect the monitor out contact on the main module and the monitor in contact on the display module with a commercially available LAN cable Please note the specifications of the LAN cable you use LAN Cable specifications Type Straight cable Category CAT5 or above Cable length 10 m or less CAUTION e Please use the display module fixed to a board etc e Please do not connect a LAN cable with the monitor in connector of the display module and the LAN connector of the GL7000 main module 3 Specifications GL7 DISP Display Module Specifications tem Contents i Display device 5 7 TFT color liquid crystal display VGA 640 x 480 Operating portion Capacitive touch panel and key shared use Almost all operations can be performed by either the touch panel or the keys touch panel Input method Finger Operating life Approx 50 000 000 times It depends on the status of use etc Display characters Japanese English French German Chinese and Korean Backlight Screen saver function 10 30 sec 1 2 5 10 30 60 min Backlight life 50 000 hours when brightness has decreased to 40 changes according to use environment Display screen Waveform2. digital screen full waveform screen digital operation screen X Y display CH number and display CH are designated for when the display of the digital operation screen is digitally enlarged Connection cable LAN cable straight CAT5 and above cable length 10 m or less For cable extension Please purchase a commercially available product Accessories Tilting table 1 module Monitor connection cable 40 cm 1 pc Screws M4 x 6 3 pcs Flat Head Screws M4 x 10 2 pcs Spare Groound cable 1 pc External dimensions 187 x 34 5 x 119 mm Not including protruding parts WxDxH approximate Weight 530g Not including the tilting table Since the touch panel in this module is a capacitive touch panel it does not respond by touching it with a pen Please note that if the touch panel is operated with an object with a sharp edge it may scratch and damage the touch panel Do not touch when your hands are wet GRAPHTEC Corporation July 1 2012 ALTHEN Frankfurter Strasse 150 152 65779 Kelkheim 49 0 6195 70060 wwwaalthen de info althen de
3. GRAPHTEC CRED GL7000 Display Module GL7 DISP UM 151 USER S MANUAL Thank you very much for buying this GRAPHTEC product This product is a display module for recording Please use it by installing it on the main module These directions describe preparations and cautions before measurement For the details concerning operation procedures etc read the User s manual recorded on the CD ROM included with the main module Confirmation of the exterior After opening the package please confirm that there are no problems scratches and dirt on the exterior before use Confirmation of the attached items e Instruction manual this book 1 e Tilting table 1 module e Monitor connection cable 40 cm 1 pc e Screws M4x6 3 pcs Ground cable 1 pc e Flat Head Screws M4 x10 2 pcs Spare If by any chance faults are found please contact the store where you bought the item Please note that items mentioned in this book may change without prior notice 1 Part Names Explanation of the module s part names and functions 1 Monitor 2 Operation key 3 Threaded hole for mounting GRABHTES sara RATERS 4 Connector for connecting to module 5 Threaded hole for mounting 6 Nail 7 Monitor In connector 1 Monitor 2 Operation key 3 Threaded hole for mounting Threaded hole for fixing to the main module 4 Connector for connecting to module Connec
4. the face cover and remove the face cover ED 7 ALTHEN Frankfurter Strasse 150 152 65779 Kelkheim 49 0 6195 70060 wwwaalthen de info althen de 4 Join the display module with the module connector and insert into the main module A 5 Attach the fixation screws of the main module 2 places on the side During installation a 4kgf cm screw tightening torque is recommended Tilting table Monitor connection cable 40 cm 1 Install by binding the monitor connection cable with the clamp on the tilting table Bind so that the there is approx 25 cm between the monitor connection cable and the connector 2 Attach the display module to the tilting table with the attached fixation screws 2 places During installation a 4kgf cm screw tightening torque is recommended 3 Connect the connector of the monitor connection cable to the monitor in connector of the display module E Ei 4 Connect the monitor connection cable to the monitor out connector of the main module and attach the 4 point nails on the tilting table by fixing them to inset part of the main module 4 places AS 5 Attach the fixation screws on the main module 2 places on the side During installation a 4kgf cm screw tightening torque is recommended 6 Attach the ground cable to the main module GND terminal with the fixation screws attached to the tilting table Tilting table fs
5. tor for connecting to the main module 5 Threaded hole for mounting Threaded hole for fixing to the tilting table M4 Approx depth 5 mm 6 Nail esveissiissinscwnevnesivnsinssnswncns Threaded hole for fixing to the tilting table 2 places 7 Monitor In connectot Connector for use when extending cables and when using the tilting table 8 Nail 9 Tilting table 10 Clamp 8 Nail no 11 Mounting hole 8 Nai sssssiinsensensennsssssssncaniinen Nails for fixing to the main module 4 places 9 Tilting table 10 ClAIPisvvsssissssssacewnewnassnsivnnn Clamp for binding the monitor connection cable 11 Mounting hole Threaded hole for fixing to the display module 2 How to Install Module This explains how to attach the module to the main module A CAUTION When installing or removing the module please make sure that the power is off The display module has 3 basic positions A When the main module is attached fitting to the main module B When using the tilting table Use the tilting table at a 15 tilt angle to fit to the main module C When extending cables Use a commercially available LAN cable and attach to a place separated from the display module on the main module A This explains how to install when attaching the main module 1 Remove fixation screws from the main module 2 places on the side gt CE 2 Pull the nail on the upper right side of
Download Pdf Manuals
Related Search