AM2030 User Manual
Contents
1. one is JUMPER 2 3 minutes Right Left 5 minut Factory default T Ss setting is 5 minutes Right Right 10 minutes 1 Minute 3 Minutes 5 Minutes 10 Minutes BACKUP BATTERY CONNECTION OPTIONAL PLEASE CONTACT ORION FOR MORE DETAILS PAIRING BUTTON SIREN ALARM DURATION SETTING JUMPERS WIRED ACCESSORIES CONNECTION EXPANDING PORT OPTIONAL PLEASE CONTACT ORION FOR MORE DETAILS WIRELESS STROBE SIREN AM2030 4 OPERATION Pairing with AM2000 control panel 1 Open AM2030 siren front cover Press and hold tamper switch for the entire pairing setup to avoid false tamper alarm 2 Connect power supply to AM2030 siren 3 Disarm AM2000 control panel by keying in password and pressing Disarm button 4 Press and hold AM2030 siren pairing button for 0 5 second 5 Arm AM2000 control panel by pressing Arm button to pair with AM2030 siren 6 When beep sound is emitted from AM2030 siren they are paired successfully 7 After pairing disconnect power supply and reassemble front cover 8 AM2030 siren is ready for use and fixed mounting installation To check if they are connected successfully arm AM2000 control panel and trigger a sensor If AM2030 siren hoots this indicates the connection is successful If not the connection failed please re pair them When AM2000 control panel and other accessories are installed and armed if an intrude2. OSION I PROFESSIONAL SECURITY SYSTEM WIRELESS STROBE SIREN AM2030 TAMPER PROTECTION TRANSMITS ALARM SIGNAL WHEN DEVICE REMOVED OR CASING OPENED HICH VISIBILITY FLASHING BLUE STROBE LIGHT WITH POWERFUL SIREN WIRELESS 00 METRES WIRELESS TRANSMISSION RANGE INSTRUCTIONS FOR USE IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY NION PROFESSIONAL SECURITY SYSTEM l PLEASE CONTACT CIKRICOTN E IF YOU HAVE ANY CONCERNS OR PROBLEMS WITH THIS PRODUCT Customer Service Phone 03 9982 5111 Monday to Friday 8 30am 5 30pm EST Email customerservice orionlive com lt For further information visit www orionlive com au 120dB ALARM SIREN HANGING HOLES Insert f mounting screws into S the following si holes for Ta wall fix w e eja mounting _ g DC e ROWER INPUT STROBE LIGHT MOUNTING PLUGS DETERRENT CONTENTS AND SCREWS X2 SUPPLY STICKERS STROBE SIREN 26 4 ri WIRELESS STROBE SIREN AM2030 gt D Pair up AM2030 strobe siren to AM2000 control panel before fixed mounting installation Refer to section 4 1 Before mounting the siren please ensure the mounting location has 240V a c mains power supply available nearby to provide power to the siren 2 To fix mount the siren please open the siren by unscrewing the enclosure screw located under the strobe light Then detach the front enclosure from the base and mount the b
3. ase to the wall Finally reassemble siren front cover 3 It is recommended to mount the siren at the height of 2 5m from the ground and under eave TAMPER SWITCH when the siren is removed from mounting during armed state the tamper switch will be triggered and generate a signal to alarm the AM2000 control panel WIRED ACCESSORIES CONNECTION EXPANDING PORT optional please contact ORION for more details Additional ports for fix wiring accessories BACKUP BATTERY CONNECTION optional please contact ORION for more details In an event of power outage or power been cut off by intruder the backup battery can power the unit up to 6 hours in armed mode or 30 minutes for siren alarming z CHUANGO WS 108_V2 1 ta 378L05 dj a Lk r EK PEAST iG Ga feed ce R01 C2 A C v 04 v d 2 bs SA ld 15 o fea Juzi sj AVAS R11 e rt i v al frem R6 CS Tay va 4 C16 we N Q5 iz A 4 PAIRING BUTTON press and hold for 0 5s to pair with AM2000 control panel SIREN ALARM DURATION SETTING JUMPERS siren alarm duration can be set to 1 minute 3 minutes 5 minutes and 10 minutes To change the siren alarm duration simply rearrange the two jumpers on the Siren alarm duration setting jumpers to the following setting NOTE The Upper ae eee ee one is JUMPER Left Left 1 minute 1 andthe Lower Ief Right
4. ge has not been modified or repaired without the approval of Arlec and has not been used for commercial purposes Warranty If you wish to claim on the Warranty you must at your own expense return the product and provide proof of original purchase and your name address and telephone number to Arlec at the address below or the retailer from whom you originally purchased the product within 12 months from the date of purchase Arlec will or authorise the retailer to assess any claim you may make on the Warranty in the above manner and if in Arlec s reasonable opinion the Warranty applies Arlec will at its own option and expense or authorise the retailer to replace the product with the same or similar product or repair the product and return it to you or refund the price you paid for the product Arlec will bear its own expenses of doing those things and you must bear any other expenses of claiming on the Warranty The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failu
5. n between siren and AM2000 control panel Poor No signal POSSIBLE CAUSE Power supply not connected or electricity outage Power supply or electricity outage The siren and AM2000 control panel are not paired Signal interference out of transmission range or low battery ACCESSORY ONL USE WITH AM2000 KIT WIRELESS STROBE SIREN AM2030 SUGGESTED REMEDY Check power supply ensure power point has electricity use backup battery not included Please pair the siren and AM2000 control panel following pairing instruction Relocate siren away from water air conditioner refrigerator radio transmitting devices metal objects heater oven any heat sources rapid temperature changing high air flow locations or major obstacles Relocate the siren closer to AM2000 control panel Replace battery ONION IEF PROFESSIONAL SECURITY SYSTEM 8 WARRANTY Arlec guarantees this product in accordance with the Australian Consumer Law Arlec also warrants to the original first purchaser of this product you from a retailer that this product will be free of defects in materials and workmanship for a period of 12 months from the date of purchase provided the product is not used other than for the purpose or in a manner not within the scope of the recommendations and limitations specified by Arlec is new and not damaged at the time of purchase has not been subjected to abuse misuse neglect or dama
6. r is detected both AM2000 control panel and AM2030 strobe light siren will hoot to deter the intruder The siren will turn off in 1 minutes on factory default setting At the same time AM2000 control panel will send a SMS and auto dial to alert the user if GSM is enabled 5 WARNING Do not drop puncture or violently shake the siren gt Do not mount directly expose or put near to the sun water air conditioner refrigerator radio transmitting devices metal objects heater oven any heat sources rapid temperature changing or high air flow locations gt Do not cover the siren mount siren on adequate locations and heights gt Handle the siren with care avoid unnecessary force or impact gt This siren to be mounted under eave 6 SPECIFICATIONS Power Supply 12V DC 500mA Standby Power 0 36W Max lt 30mA Consumption Armed Power 4 8W Max lt 400mA Consumption Wireless Transmission Up to 50m Range Radio Frequency 433MHz Siren Volume 120dB Strobe Light 4x LED with blue lens reflector Dimensions 200 L x 110 W x 60 H mm Operating Temperature 10 C 55 C Operating Humidity 0 80 Backup Battery UPS A890 optional Please contact ORION for further details THIS UNIT TO BE MOUNTED UNDER EAVE WIRELESS STROBE SIREN AM2030 OSION IEF PROFESSIONAL SECURITY SYSTEM 7 TROUBLESHOOTING GUIDE PROBLEM Siren has no power or not powering up No LED indication No interactio
7. re Arlec Australia Pty Ltd ACN 009 322 105 Arlec gives the Warranty Arlec s telephone number address and email address are Customer Service 03 9982 5111 New Zealand Toll Free 0800 003 329 Building 3 31 41 Joseph Street Blackburn North Victoria 3130 Blackburn North LPO P O Box 1065 Blackburn North 3130 Email custservice arlec com au CPIN002636 3
Download Pdf Manuals
Related Search