K3 CD DI PLAYER
Contents
1. GUARANTEE Your ROKSAN Product is guaranteed against any defect in materials and workmanship for a period of five years from the date of purchase This guarantee only becomes effective once your product has been registered within fourteen days of purchase Roksan reserves the rightto ask for a copy of your purchase invoice This guarantee excludes 1 Damage caused due to accident misuse neglect and incorrect installation adjustment or repair 2 Liability for damage or loss during transit from the retailer or purchaser to ROKSAN or its authorised distributor for the purposes of repair or inspection Carriage costs to ROKSAN shall be borne by the consignor All claims under this warranty must be made through an authorised ROKSAN retailer If equip ment returned for repair to ROKSAN is found on inspection to comply with the product spe cification ROKSAN reserves the right to make a charge for examination and return carriage Unauthorised servicing will void this guarantee Warranty will only be valid when the product is bought through the authorised retailer All the warranty issues will be dealt through the selling retailer WARRANTY REGISTRATION CAN BE DONE ONLINE AT http www roksan co uk rw php ROKSAN K3 MANUAL Operating System Frequency Response Harmonic Distortion Intermodulation Distortion S N Ratio IHF A Wtd Wow amp Flutter Channel Separation Output Voltage Digital Inputs Digital Outputs2. D A Conversion Resolution Sampling Oscillation Crystal Jitter Idle Pattern Stop Band Rejection Power Supply Power Consumption Dimensions W x H x D Weight ae _ SPECIFICATIONS CD Digital Audio System CD CD R CD RW 20Hz 20kHz 0 2dB lt 0 002 OdB 1kHz lt 0 006 30dB 1kHz lt 0 002 OdB 20Hz lt 0 008 OdB 20kHz lt 0 0015 O 0dB lt 96dB L amp R Quartz Precision 100dB O 1kHz 80dB 20kHz 2 2V RMS 75 Q x Coaxial RCA 1 x Optical Toslink 75 Q Coaxial RCA 110 Balanced AES EBU XLR Optical Toslink PCM1730E Advance Segment Audio Stereo DAC 24 bits 192 kHz 3rd Overtone Oscillation Super Precision Custom Made lt 150 psec lt 107dB L amp R lt 98 dB High Performance Toroidal Transformer 7 Fully Regulated Power Rails lt 15W 432 x 380 x 105mm Incl Feet 9kg All specifications are liable to change without notice E amp OE
3. Time Button AC Mains Power Switch 10 Input Selector Switch CD digital optical digital coaxial 11 Input Selection LED Indicator CD digital optical digital coaxial ROKSAN K3 MANUAL K3 CD Di Player Rear Panel View ul u 12 Analogue Output Left amp Right 13 Digital Outputs Optical Toslink Balanced AES EBU Coaxial RCA 14 Digital Coaxial Input 15 Digital Optical Input 16 IEC Mains Inlet Socket 17 AC Mains Fuse Holder 18 Voltage amp Fuse Rating Label SET UP CONNECTING MAINS POWER Please refer to the front amp rear panel views The moulded IEC connector of the supplied mains lead should be plugged into the socket 13 on the rear of the unit first and then plugged into the mains supply The Mains power switch 9 is on the front underside of the CD Player This switch can be left on if however the CD Player is likely to be unattended for a long period switch it off and unplug the mains lead from the wall ROKSAN K3 MANUAL ANALOGUE OUTPUT SIGNAL CONNECTIONS The Analogue Outputs 11 use Gold plated RCA Phono sockets and should be connected to the CD or LINE input of your Preamplifier or Amplifier Standard convention Right Channel Red Left Channel Black or White DIGITAL OUTPUT The Digital Outputs 12 utilise Gold plated RCA Phono socket for Coaxial SPDIF output Tos link for Optical output and XLR for Balanced AES EBU output Any of these could be connected to a corre
4. encountered problems with suggestions for possible cure The list is not exhaustive If you have any unresolved problems please consult ROKSAN or your appointed ROKSAN dealer or distributor Symptom The disc tray will note close when a disc is inserted Disc inserts display does not show the number of tracks and playing time Skipping and mistracking Excessive hum One channel inoperative Remote handset operation erratic or not working No sound when digital input is connected Likely Cause Disc is not placed properly in tray Disc is warped Disc inserted upside down Disc is dirty scratched Condensation on the laser lens Dirt on the laser lens Excessive vibration Disc is dirty or scratched Connection loose cable faulty Interconnect or amplifier faulty Batteries weak or incorrectly inserted signal path obstruc ted or angle too wide bright light Incorrect input selection Suggested Remedy Replace disc correctly Discard disc Re insert disc label side up Clean or discard disc Let player warm up dry lens Refer to appointed dealer or service centre DO NOT use CD lens cleaners Ensure player is stable Clean or discard disc Re connect plugs change cables Change lead try alternative line input or amplifier Replace batteries correctly remove obstruction operate handset in front of CD player darken room Use right rocker switch to select correct input ROKSAN K3 MANUAL
5. ROKSAN K3 CD DI PLAYER Congratulations on the purchase of your Roksan K3 CD Di PLAYER Your audio component is designed and manufactured to the highest specifications and rigorously tested to offer many years of reliable and high quality musical enjoyment Correct installation and operation of the product will have a significant influence on the performance of your audio sys tem and ensure many years of trouble free listening ROKSAN K3 MANUAL EU DIRECTIVES This product is designed to comply with the legal provisions of EU Directives 89 3336 EC and 72 23 EC The standards which have been applied are those which were in force atthe time of the introduction of this product This product bears the CE mark This product is compliant to EN 60065 This product must be earthed Please ensure that other equipment connected to it is earthed according to the manufacturer s instructions CAUTIONS AC MAINS SUPPLY Your K3 CD Di Player is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug Before connecting the mains lead please check that your mains supply corresponds to this label as below 230V Products Voltage Range 220V 240V 115V Products Voltage Range 110V 120V 100V Products Voltage Range 90V 110V The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the unit s rear panel The other end is normall
6. er will still be operational but locked Please keep the CD player in Pause mode no longer than strictly necessary SELECTING A TRACK Press the Track Forward Button 7 to go to the next track on the disc Pressing the Track Back Button 6 will take you to the previous track When the disc is playing press the Track Back Button once to take you to the beginning ofthe current track and a second time to take you to the start of the previous track In Play mode press the Track Forward Button 7 to take you forward to the start of the next track Once the procedure is complete the disc will commence playing from the selected track When a disc is first loaded you can use these buttons to select your desired track Having done so press the Play Pause Button and your disc will commence playing from the selected track You may select a track when Pause is engaged In this case the disc will revert to Pause after the procedure is complete and you will have to press Play Pause Button to continue playing the disc DISPLAY Pressing the Time Button 8 on the front panel repeatedly will cycle the display through the following modes e Normal Indicates track No and how long it has been playing First Press Indicates track No and remaining time on the track e Second Press Indicates number of tracks and remaining time on the disc ROKSAN K3 MANUAL un REPEAT There are two repeat functions available on your CD player
7. nauthorised modifications are made INTERFERENCE Properly installed this unit should not cause harmful interference to radio communications There is however no guarantee that such interference will not occur in a specific installation If interference arises which you can determine by switching the unit off and on you could try to remedy matters by the following e Re orient or re locate the receiving antenna e Increase the distance between the CD Player and receiver e Connect the unit to a different mains circuit from that of the receiver e Consult your ROKSAN appointed dealer or an experienced Radio TV technician for help and advice Location Your K3 CD Di Player should be located in a well ventilated area and kept away from sources of heat dust and humidity and out of direct sunlight The CD Player may be positioned either as a free standing unit or alongside another audio video product Never place the CD Player on carpet or any surface likely to hinder normal ventilation Never allow liquids or other objects to fall into the unit This unit contains no user serviceab le parts DO NOT remove any panels or attempt to service it yourself Unauthorised servicing will void the warranty ROKSAN K3 MANUAL INSTALLATION K3 CD Di Player Front Panel View 1 2 3 4 5 6 7 8 E Open Close Button Stop Button Play Pause Button Fluorescent Display CD Disc Tray Track Back Button Track Forward Button Display
8. o gt a e To repeat all tracks on the disc press Repeat Button in the CD section of the R7 remote pictured right bottom left button The display will show ALL 2 gt m a INPUT vV 2 Y TAPE B gt e To repeat one track press the Repeat Button twice The display will show ONE lt E a 0 0 0 R o TRACI CA E REPEAT SHUFFLE OPERATING THE DIGITAL INPUT If you wish to use an external digital source it should be connected to the K3 CD Di by either the coaxial 14 or optical 15 digital input options on the rear ofthe K3 CD Di Now select the correct input via the rocker switch located on the underside right of the unit 10 When either of the digital inputs are selected the LED indicator located in the centre un derside of the unit 11 will illuminate on the relevant colour Please see below for the correct position for each input o EB Middle position LED not illuminated e Optical Left position LED will illuminate BLUE e Coaxial Right position LED will illuminate WHITE ROKSAN K3 MANUAL TROUBLESHOOTING If you suspect your ROKSAN K3 CD Di Player is not operating properly first check all the connections carefully Pay particular attention to input and output connections Phono plugs should be fully inserted a frequent cause of problems is that Phono plug surrounds do not make proper contact On the next page are some commonly
9. p Press the button again to close the tray NOTE Never load a disc until the drawer has opened fully or try to close the drawer until you are sure that the disc is properly seated in the holder recess Warped discs should never be played The drawer should only be opened using the front panel control Under no circumstances should you attempt to open manually ROKSAN K3 MANUAL If a disc is not inserted or ifthe disc is damaged or inserted upside down the CD player will remain inoperative display will indicate no disc When a disc has been loaded your K3 CD Di Player will briefly spin the disc while it studies the data encoded on it The disc will then stop and the display will indicate the number of tracks on the disc and the total play time IMPORTANT NOTE The Input Selector rocker switch 10 should be in the middle position to enable CD playback The centre underside located LED will not be illuminated if the switch is in the CD position If the LED is blue or white demonstrating optical or coaxial digital input is selected then the switch will have to be changed to the centre CD position To commence playing a disc press Play Pause Button 3 once The disc will play from the beginning Press the Play Pause button 3 a second time to pause the disc whilst it is playing Pressing the button again will resume playback from the point at which Pause mode was entered In Pause mode the disc continues spinning and the las
10. sponding input of an amplifier with a digital input orto an outboard Digital to Analo gue converter DAC IMPORTANT NOTE For optimum performance it is recommended to use high quality in ter connect cables such as ROKSAN HDC 03A High Definition Analogue Cable and HDC 01D High Definition Coaxial Digital Cable DIGITAL INPUT The K3 CD Di features two digital inputs e 1xCoaxial RCA 13 e 1x Toslink Optical 14 Any device with a digital output can be connected to the K3 CD Di and the signal will be fed to the analogue outputs of the player into the relevant amplification If the digital source device you wish to connect has either optical coaxial or both digital output s it can be connected to the CD Di to utilise the player s circuit for superior sound performance for operation instruc tions please refer to the following section OPERATION Please refer to the front amp rear panel views SWITCHING ON The Mains power switch 9 is located on the front underside of the CD Player This switch can be left ON for normal operation If unattended for a long period going on a short break holi days etc the Mains power should be switched OFF and the power cord disconnected from the mains power input USING THE CONTROLS NOTE Please refer to the front panel view on page 4 Press the Open Close Button 1 once to open the disc loading tray Display will indicate open Carefully load disc into the tray recess with the label side u
11. y attached to the appropriate mains plug for your country In the UK this is the standard UK13A plug This plug should usually not be removed from the lead If you do remove it please dispose of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous conditi on We suggest that you obtain a complete replacement lead from your dealer Should you move to another country where either the mains voltage or the mains plugs are different from those as supplied with your CD Player please contact the appointed ROKSAN distributor for assistance Please observe correct mains polarity at all times The CD Player mains fuses are located on the rear panel next to the IEC mains connector They must only be replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the unit This product requires connection to earth ground The earth wire in the UK this is colour coded green yellow of the mains cable supplied with your CD Player must be connected to a suitable earthing point established for this purpose by your electricity supply company If you are in any doubt consult a qualified electrician If the equipment is likely to be unattended for a longer period of time please unplug it from the mains supply ROKSAN K3 MANUAL GENERAL CAUTIONS FCC WARNING This equipment may generate or use Radio Frequency energy The user may lose the right to operate this equipment if u
Download Pdf Manuals
Related Search