HD-008 DIGITAL DRUM - กลองไฟฟ้า HXM Electric Drum HD
Contents
1. 1 Display Information display such as Kit number and name Song name pad selection etc The display is back lit LCD Liquid Crystal Display type 2 SONG Button Enter the Demonstration or User Song play mode 3 KIT Button Enter the Drum kit selection mode 4 CLICK Button Metronome switch and edit 5 TEMPO Button Change the tempo of the metronome also used for record and song playing 6 7 Sequencer Buttons e Record Button Press it to engage the record Kg Play Stop Button The Play Stop button is used in both Song and Record operations Please refer to relevant chap ters for detailed information 8 COUNT Button Enter the Count mode to exam how fast you could strike the pad 9 DATA Knob Rotate the knob to change data for all operations 10 ENTER Button Confirm your choice or operating 11 EXIT Button Exit to the previous LCD window or return to the Kit Selection screen 12 SETUP Button Enter the Setup mode to edit overall parameters 13 MODE Button Change the song playing mode 14 EDIT Button Enter the Kit Edit mode 15 Pad Select Buttons These are dual function buttons They are pad selection buttons in the Edit mode or Kit Selection buttons for Kit quick selection D SOUND MODULE BACK PANEL Ten scz OOo 2 o Nile TRIGGER LINE OUT LINE IN PHONE2. USB ON OFF POWER O 0 O O O O 6 O 1 Power In Jack Plug in the DC cable of the attached adaptor 2 Power Switch Turn On Off the sound module Note When you turn the power off do not turn it on immediately Wait at least five seconds to turn the power on so that the electronic circuits can properly reset 3 USB Jack The USB connector allows you to connect the drum directly to your computer s USB port The USB interface is compatible with Windows XP Vista Windows 7 and MAC The computer will recognize the drum as Audio Device 4 Headphone Jack The drum has stereo headphone jack You can play in total silence without disturbing others in the room by plugging a set of headphones into the sockets 5 Headphone Volume Knob Rotate it to adjust the headphone volume 6 Line In Jack Line In stereo audio input jacks will mix the supplied signal with the internal drum sound It can be used to hook up items such as CD players MP3 player etc 7 Line Out Jack There is no built in speaker in the drum Line Out stereo audio output supplies the drum output signal to external amplification such as home stereo PA system or other stand alone amplifiers If you connect with external mono system stereo mono adapter is recommended 8 Pad Trigger Connector Each pad and Hi Hat control pedal has labeled cable All cables are merged into a single connector Plug in the cable into jack of corresponding component The
3. KICK TOM1 TOM2 TOMS SNARE CRASH RIDE HIHAT H PDL ISS If the song name was already used for the previous recording it ll ask you do you want D CA to replace it with the new recording Press ep c e t the ENTER button to replace it or press the EXIT button to select another song number B D fr eo so KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL 4 Erase User Song In the Kit selection mode press the SONG button twice to enter the User Song mode Select an User song then press the ENTER button Erase it will appear on the display Press the ENTER button to erase this song or press the EXIT button to give up erasing Sf WLR D Then it ll return to the User Song mode ee ee t3 E Ga c9 Sm KICK TOM1 TOM2 Tom3 SNARE CRASH RIDE HIHAT H PDL MIDI amp USB MIDI stands for Musical Instrument Digital Interface This is a world wide standard communication interface that enables electronic musical instruments and computers to communicate with each other so that instructions and other data can pass between them This exchange of information makes it possible to create a system of MIDI instruments and devices that offers far greater versa tility and control than is available with isolated instruments Whether you interface with computers sequencers expanders or other equipment your musical horizons wi
4. D washer and felt pad gt D washer and felt pad P d 2 Putthe cymbal pad into the i 2 Put the Hi Hat into the rod then attach parts re moved in the stet 1 Fas ten the wing nut 3 Adjust the angle and height of the rod then tighten the wing nut rod then attach parts re moved in the stet 1 Fasten the wing nut but not too tightly It allows the pad a little bit wobbling like real acous tic cymbal Note Crash and Ride has different part number Please refer to indication in the page 2 3 Adjust the angle of the rod then tighten the wing nut Snare Installation Tom Installation 1 Insert the snare into 1 Insert the tom into e the snare installation L the tom installation L O Le Rod then tighten the Rod then tighten the wing nut wing nut 2 Adjust the angle of Note All toms use the the L Rod then tighten same pad the wing nut 2 Adjust the angle of the L Rod then tighten the wing nut Kick Installation 1 Align holes in support A and stand 2 then insert bolts and fasten with attached key 2 Insert tongue of the kick stand into slot of the pedal 3 Tighten the wing nut on the pedal level to fix it Note Please refer to page 9 for pedal P 6C installation Sound module Installation 1 Align holes in supporting board and sound module then insert screws and fasten it 2 Insert rod of the supporting board to the clamp then tighten the wing nut
5. above while you could try by pressing the pedal quickly Press the ENTER button to confirm Press the EXIT button to exit current opera tion and back to Advanced menu Press the EXIT button to exit current operation and back to Advanced window In the Advanced window press the EXIT button to turn to the Kit Selection mode If you did some changes during the Advanced setting the changes will be saved automatically The display will say Saving amp Close THR Vi us DZS TOM3 SNARI CRASH RIDE HIHAT SHAW Va lal i u Pedal THR Bb d a a amp c Sm GS TOM3 SNARI CRASH RIDE HIHAT Ti KICK Saving na an uju I LI ILL C TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL SETUP 7 Reset After setup kit editing and recording all of changes are saved in the unit This feature al lows you to recover the factory settings n Select Reset in the parameter selection stage then press ENTER button There are four types E MIU UI of reset operations can be selected Rotate the ibo Na de eet i E vam DATA knob to select Reset Kit Reset sound parameters in all User kits which changed during the kit editing When Reset Kit is blinking press the ENTER button The display will show AreYouSure Press the ENTER button to confirm or press the EXIT button to cancel Then it ll ret
6. 273 Electronic Crash 1 274 Mute Crash 275 Crash 10 Voc Crash 1 276 Crash 11 Voc Crash 2 277 Crash 12 Rock Crash 2 278 Crash 13 Jazz Crash 1 279 Crash 14 Standard Crash 3 280 Crash 15 FXS Crash 2 281 Crash 16 Wood Crash 282 Crash 17 Electronic Crash 2 283 Crash 18 Standard Crash 4 284 Crash 19 Jazz Crash 2 Crash 18 Crash 19 285 Standard Splash Crash 21 Crash 22 Description 16 Chinese Sound 9 361 317 China 10 Chinese Sound 10 N Castinets Surdo Mu Surdo Op Full Shaker Full Claves Full Cabasa Full Maracas 9 2 s a 01 02 03 S 05 06 07 36 36 36 21 3 Tamute 01 Tamute 02 Tamute 03 Voice Effect 01 Voice Effect 02 Voice Effect 03 Voice Effect 04 Voice Effect 05 Voice Effect 06 Voice Effect 07 Voice Effect 08 Voice Effect 09 Voice Effect 10 Voice Effect 11 Voice Effect 12 Voice Effect 13 Voice Effect 14 Voice Effect 15 Voice Effect 16 Voice Effect 17 Voice Effect 18 Voice Effect 19 Voice Effect 20 Voice Effect 21 Voice Effect 22 Voice Effect 23 Voice Effect 24 Voice Effect 25 Voice Effect 26 Voice Effect 27 Voice Effect 28 Voice Effect 29 Voice Effect 30 Voice Effect 31 Voice Effect 32 Voice Effect 33 Voice Effect 34 Voice Effect 35 4 erc 50 3 3 328 329 4 330 286 Crash 21 Standard Crash 5 287 Crash 22 Standard Crash 6 288 Standard Ride 1 89 Standard Ride 2 0 Rock Ride 1 9 Standard Ride Bell 292 Crash Ride 293 Rock
7. Finalizing the Installation After install all components fine adjust the arm clamps and rods to the best positionyou like finally Electronic Connection Please refer to the SOUND MODULE Chapter for electronic connection INSTALLATION KIT B CRASH B 12 Cymbal edg l B RIDE B 12 Cymbal Hi HAT ies A 8 Hi Hat SOUND MODULE HD 008 RACK SYSTEM RACKB B 8 Kick HI HAT CONTROL PEDAL B HH ctrl KICK PEDAL P 6B Kick pedal KICK PEDAL IS OPTIONAL ACCESORY d The drawing shows complete drum kit after your installation Each drum pad cymbal pad and Hi Hat control pedal has its part number underneath the part name for your reference in installation The part number is printed in part packing box Power adaptor and connection cables are not shown in the drawing INSTALLATION KIT B RACK SYSTEM L Rod Clamp Wing nut gt Rack EE a Ko Arm Rubber Feet Folded rack in package Leg You can find all of these components in RACK SYSTEM RACKB package INSTALLATION KIT B RACK
8. INSTALLATION 5 Loosen the wing nuts in the clamp Move and ro tate the L Rod and cym bal support rod to proper position and then tighten Please note Hi Hat rod is the wing nuts different from ride crash 4 Loosen wing nut in rod the clamp Move the cross beam to proper location then tighten the wing nuts 3 Loosen the wing nuts in the arm clamp Open arms adjust the position then tighten the wing nuts n Loosen the wing nuts in the leg clamp Open the legs ad just the position then tighten the wing nuts Adjust arm leg and cross beam to proper position Place L rods and cymbal support rods on relevant clamp as shown in the diagram INSTALLATION COMPONENTS INSTALLATION KIT B q Oo Hi Hat Installation 1 Remove the wing nut 1 Remove the wing nut qi D washer and felt pad from the washer and felt pad from the top of the rod top of the rod 2 Put the cymbal pad into the rod then place back parts re moved in the stet 1 Fasten the wing nut but not too tightly It allows the pad a little bit wob bling like real acoustic cymbal 3 Loosen the side wing nut adjust the angle of the rod then re tighten the wing nut 4 Loosen the wing nut on the clamp adjust the height of the rod then re tighten the wing nut 2 Put the Hi Hat into the rod then place back parts removed in the step 1 Re tighten the wing nut 3 Loosen the
9. name Ia po S e S KICK TOM1 TOM2 Tom3 SNARE CRASH RIDE HIHAT H PDL KIT CLICK TEMPO TEMPO CLICK KICK TOMi TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL KIT I CLICK TEMPO H PEDAL EDIT HI HAT KICK 2 CRASH TOM3 EN 3 1RIPF I TOM 2 8 A a TOM 1 e mn GO Note When use these 9 buttons as numeric button the indicator of the EDIT button must be off be cause they are dual function buttons Please see lt EDIT gt Chap ter in this manual for details There are two types of song The demonstration song Demo is for your enjoyment and practice User song is your own recorded song 1 DEMO SONG 1 Select and Play Demo Song There are 52 demo songs built in Press the Song button once to engage the demo song mode with the indicator lighting The dis play will show All Demo Press the mbutton immediately all demo songs will play one by one If you don t select song after 3 second the first demo song number and name will appear on the display The tempo and time signature of the demo song will appear on the second row of the display also The title of the song number section in the sec ond row of the display is DEMO The display of it will be All then the first demo number If you want to select a song you desire rotate the DATE knob to choose a song Then press the Pm button to s
10. side wing nut adjust the angle of the rod then re tighten the wing nut 4 Loosen the wing nut on the clamp adjust the height of the rod then re tighten the wing nut Snare Installation 1 Loosen the wing nut Tom Installation 1 Loosen the wing nut place the tom pad on the installation L Rod 2 Adjust the angle and height of the tom pad then tighten the wing nut L Rod 2 Adjust the angle and height of the snare pad then tighten the wing nut Kick_Installation 1 Align holes in the support 1 and stand 2 then insert bolts and fasten with attached key 2 Insert tongue 4 of the kick stand into slot of the pedal 3 3 Align holes in the tongue and the pedal then insert bolts and fasten with attached key Sound module Installation 1 Align holes in the sound module and the model mount then insert screws and fasten it 2 Insert rod of the model mount into the clamp then tighten the wing nut Finalizing the Installation After install all components fine adjust the arm clamps and rods to the best position you desire i 1 l Electronic Connection i Please refer to the SOUND MODULE Chapter for electronic connection SOUND MODULE CONTROL PANEL Pi Kerg Ra N ul ui HO uH M AL m mmo ME KIT CLICK TEMPO 9 d H W Ea
11. to change the tempo ranged 40 240 Press the ENTER button to confirm you setting After about 10 seconds this operation will exit automatically Or press the EXIT button to exit the tempo setting immediately IW CLICK ET ul TI amp m c Sc S HIHAT H PDL KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE KIT CLICK EyP9 LAAS DRUM KIT EDIT A drum kit consists of drum pads cymbals pads and Hi Hat pedal physically They generate sound in different way such as by striking head or rim of drum pad triggered by striking cymbal bow or edge pressing Hi Hat pedal We call the source to generate sound as Part Each part is identified on the display by the icon with mark The icon refers to part of striking head of pad and cymbal is shown below H PDL refers to sound generated by pressing the Hi Hat pedal HIHAT refers to Open Hi Hat sound generated by striking the Hi Hat cymbal Meena ee KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL Alternative part of the same instrument is shown by extra mark under the icon For example the part generating sound by aming the rim ie Tom 1 pad is marked by an arch under the TOM1 icon Fe c DN TOM3 SNARE CRASH RIDE cHIHAT TOM2 7 Rim of TOM1 Rim of TOM3 ease of CRASH Close HI Hat Rim of TOM2 Rim of Snare Rim2 of Snare Edge of RIDE TOM1 Each part has multi parameters to create its characteri
12. 23 UserKit24 UserKit25 UserKit26 UserKit27 UserKit28 UserKit29 UserKit30 QUICK SELECTION KIT No KIT NAME No PopRock E 9 JD 12 H Ks Lm me 25 36 37 50 MadDrm VOICE LIST N N er O o 2 o A A N Standard Kick 3 Electronic Kick 1 Funk Kick 6 7 8 9 0 1 7 Electronic Kick 2 2 Standard Kick 4 3 4 5 6 7 9 7 7 7 Standard Kick 5 o Loca Rock Kew A o e a Ei m A o No A be 9 a a 99 8 A be 9 a 1 eat Ser K K K K K Ala olo Kol Es ala o co 20 2 o xm m O Kick20 Room Kick 1 Kick21 Latin Kick A fe Ka m X Hiphop Kick 1 Kick23 Hiphop Kick 2 A o Ka N CO K Snare 9 Snare 9 Hiphop Kick 3 Hiphop Kick 4 Kick 26 Hiphop Kick 5 5 0 A o Ka he a A o A m o 71 Ord Kick 1 nv sch t ara ana gana pa OLoOI NI ono ays s s s s Snare 15 Ord Kick 2 Ord Kick 3 Ord Kick 4 n 3 D 2 o a 1 n 3 D 2 o Oo E EE ES EE EE ESCH ES n 3 D 2 o N n 3 D 2 o 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 7 7 7 7 7 7 7 7 7 5 6 8 9 n 3 D 2 D co 81 Kick 37 Kick 37 ick 48 ick 49 ick 50 ick 51 ick 52 ick 53 ick 54 ick 55 ick 59 ick 60 nare 1 2 nare 2 3 nare 3 4 nare 4 nare 5 nare 6 2 nare 7 2 nare
13. 4 U D o A o mimimimimimimimimimimim Uujvu uj ju uju uj ju u u oco alalalzlzlalalalzlzlzlzlalalalzlzlzlzlalz 2 z z alaala lalala Vo To lov lov lov lov m To lov lov lov lov mm lov lov lov m lov TA Mm nT nT To 6 s ls lslslslslslsls alala lolalo NI INININIWINININI ININ IS IS SSS a a z2 oO amp lo m S o ljcvc o x o o xs jo m 2l o dvl o o o o o SISISISISIZISISIE 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 6 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 0 0 0 0 0 0 3 0 3 U o Az VOICE LIST Voice Effect 36 Voice Effect 41 Voice Effect 46 407 Fxs37 Voice Effect 37 Voice Effect 42 Voice Effect 47 407 Voice Effect 38 Voice Effect 43 418 Voice Effect 48 1 Loo aao vote era ea msa voeem 5 mes vetta 1 INDEX 1 60 61 121 122 136 137 161 162 186 187 214 215 239 240 258 259 265 266 287 288 307 308 319 320 370 371 418 Kick drum Snare head Snare rim Hi Tom Middle Tom Low Tom Hi Hat close Hi Hat open Hi Hat pedal Cash Cymbal Ride Cymbal Chinese percussion sound Other percussion sound Effect sound SPECIFICATIONS 3 X 8 Tom without rim 8 Snare double rims 12 Crash cymbal with 3 X 8 Tom with rim 8 Snare double rims 12 Crash cymbal with Edge amp choke 12 Ride cymb
14. 8 2 2 2 are 11 2 2 are 12 2 3 are 13 2 4 are 14 3 3 3 3 3 are 20 3 are 21 3 2 are 22 3 3 are 23 3 4 VW 3 D m O N Ka 5 n 3 D 2 o N O 1 E 8 8 8 8 8 88 k 10 k11 k13 k 14 k 15 k 16 k 17 k 22 k 24 k 27 k 28 k 29 k 30 k 31 k 32 k 33 k 34 k 35 k 36 k 38 k 39 k 40 k 41 k 42 k 43 k 44 ic ic ic ici ic ici ic ic ic ic ic ic ic ic ic ic ic ic ic ic ic ic ic ic ic ic 4 4 4 4 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 0 2 3 4 5 4 Fusion Kick 2 Snare O 92 93 94 95 97 ie 3 m O oe o Description Standard Snare 5 FXS Snare 2 Power Snare 3 Old Snare 1 Old Snare 2 Power Snare 4 Old Snare 3 Mute Snare HipHop Snare 3 HipHop Snare 4 HipHop Snare 5 Fusion Snare Power Snare 5 Rock Snare 6 Low Snare Latin Snare 3 ectronic Snare 2 Noise Snare ectronic Snare 3 Jazz Snare 5 E E E ectronic Snare 4 Electronic Snare 5 Funk Snare 3 Rock Snare 7 Step Snare Rock Snare 8 Rock Snare 9 Rock Snare 10 HipHop Snare 6 Q Snare 4 Power Snare 6 Q Snare Rim 1 Q Snare Rim 2 Q Snare Rim 3 Standard Snare Rim 1 Voc Snare Rim Standard Snare Rim 2 Rock Snare Rim 1 Electronic Snare Rim Jazz Snare Rim FXS Snare Rim 1 Voc Snare Rim 2 Jazz Snare Rim R amp B Snare Rim Funk Snare Rim VOICE LIST Sn Sid 15 FXS Snare Rim 2 Tom Mi 20 Latin Mid Tom 3 Hat Cl 12 Rock Close 4 Q High Tom 1 T
15. Back Panel 5 res 11 PLAYING PAD 12 DRUM KIT see IH REG 13 SONG ne mai E ee ee ta ia Si dia ks 14 Demo Song 14 User Song spe sasea es 15 METRONOME 16 MGILONOMO crc a a ca ae ae 16 Tempo con trees Gos AA 17 DRUM KIT EDIT 18 Select kit for editing 18 Enter the Edit Mode 19 Select part to edit 20 Select parameter to edit 20 Edit the parameter 20 Edit another parameter or part 20 Complete the edit 21 STRIKING COUNT 22 SETUP see aa prs a Re Ros 23 Accompaniment Volume for Demo 23 Percussion Volume for Demo 23 Master Tune aire 24 Count Sesitivity 24 Equalizer sera eta a a raioane as 2 4 Advanced Parameter Edit 25 Soest VI 215 40 de d dn amii 25 Dynamic Range 26 Trigger Corve 26 Gross Talk co tele ec pet te di 26 Hi Hat Pedal setting 27 ROSE ikxerxake4 ELE 29 RECORD 30 e WEE 30 Play back User Song 30 Erase User Song EE o ara 31 MIDI amp USB 32 KIT LIST er mtem 33 VOICE LIST pambaba rescore ka 34 SPECIFICATIONS 38 CONFIGURATION This electronic drum kit has two optional configurations The sound module is the same the rack pad system has two types The table below list
16. RJ ei A Crash and Ride rod N RR Le m 9 Note Please note that the Hi Hat control pedal is also packaged in this box INSTALLATION KIT A RACK INSTALLATION 5 Insert the cymbal installation rod to proper location then tighten the wing nuts Rotate the pad installation L Rod to proper position the tighten the wing nuts 3 Move the pad clamps to proper location then tighten the wing nuts S D Open the arm adjust the position then tighten the wing nuts ld 2 Install the left and right leg adjust the height to touch floor firmly then tighten the wing nuts ls 1 Loosen the wing nuts in the arm clamps Open the arm adjust the position then tighten the wing nuts 2 Loosen the wing nuts in the leg clamp Insert the left and right leg into the clamp adjust the height to touch floor firmly then tighten the wing nuts 3 Loosen the wing nuts in the clamp Move the pad clamps to proper location then tighten the wing nuts 4 Loosen the wing nuts in the clamp Rotate the pad installation L Rod to proper position and then tighten the wing nuts 5 Loosen the wing nuts in the clamp Insert the cymbal installation rod to proper location and then tighten the wing nuts INSTALLATION KIT A COMPONENTS INSTALLATION ff Hi Hat Installation d Crash and Ride Installation 1 Remove the wing nut 1 Remove the wing nut
17. Ride 2 294 Electronic Ride 1 295 FXS Ride 1 296 Electronic Ride 2 297 Voc Ride 298 Wood Ride 299 FXS Ride 2 300 Jazz Ride 1 301 Electronic Ride 3 302 Electronic Ride 4 303 Standard Ride 3 304 Jazz Ride 2 305 FXS Ride 3 306 Pride Bell 1 07 Pride Bell 2 08 Chinese Sound 1 309 China 2 Chinese Sound 2 310 Chinese Sound 3 Chinese Sound 4 312 Chinese Sound 5 313 Chinese Sound 6 314 Chinese Sound 7 315 Chinese Sound 8 331 2 7 3 2 3 5 6 8 9 0 BE 3 3 3 3 3 3 8 3 xs 13 xs 14 Conga Op 5 6 0 3 4 1 4 ITIN MEN Deca perce mese recs maso Deca hes a Pereas Pe Pe Pe Pe Pe Pe Pe Pe Pe Pe Pe Pe Pe Pe Pe e e n Perc28 Whistle Sh Whistle Lg U o O DD co 4 4 3 Perc 29 Pereso GuiroSh o Perost Guirotg Percs2 Claves Perc 33 Persa Perc 35 Perc 36 1 35 8 9 9 9 ees anto reread single sar Tees seme 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 2 3 5 6 7 8 9 0 1 2 3 5 6 7 8 9 0 Block Hi 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 U o Hd Oo 99 N 1 rc 19 rc 20 rc 21 rc 22 rc 23 rc 24 rc 25 rc 26 rc 27 rc 29 rc 30 rc 31 rc 32 rc 33 rc 34 rc 35 rc 36 rc 38 rc 39 2 3 4 5 0 2 5 6 7 7 8 9 2 5 6 7 8 9 2 5 6 7 8 9 3 3 3 4 3 4 3
18. Strength Log Spline EDIT Cross Talk DEMO TEMPO CLICK Bi Gi 00 YY L CH E Za ere e KICK TOM1 TOM2 TOM3 RIDE HIHAT H PDL Source pad of cross talk SETUP Select a pad which is affected by cross talk ing by pressing its pad select buttonor strike the pad its icon and button indicator will blink as well Rotate the DATA knob to change the cross Da eR cg talk value ranged O 100 The smaller the value the less the pad will be affected by crosstalk However if the value is too low it ll be harder to get the pad to generate its sound when you hit it You should balance it carefully RIDE HIHAT H PDL EDIT O AVP wt 99 Kg 3 OM 2 8 Press the ENTER button to confirm your MAT setting The display will stay on the Cross OS lit Talk setting for the current source pad You could select another pad which is also affected by the current pad and continue your setting Press the EXIT button to exit current operation and back to Advanced menu Hi Hat Pedal Setting Strike the Hi Hat pad without pressing the Hi Hat control pedal to make open Hi Hat sound voice No 240 258 The Hi Hat pedal has two zones for sound control which is divided by Close Threshold point Strike the Hi Hat pad while pressing the Hi Hat control pedal gradually to make consecutive open to close Hi Hat sound when pedal position is higher than close thresho
19. The EDIT Save it icon will disappear The icon of the edited part KIT DEMO _ TEMPO CLICK Will stop blink Ui IE CO YY The edited results will cover the current drum D DA kit and activate immediately wok vomi yoke mae vumm ime we epi When the power turn off the changes in this kit will reset Tip You may reset the kit changes by Reset feature Please see lt SETUP gt chapter in this Manual for details STRIKING COUNT This feature allows you to test how fast you can strike pad Press the COUNT button the indicator iwll light up The examination time could be 1 minute 2 minutes or 3 minutes Rotate the DATE knob to select time then press the ENTER button Then blinking Ready will appear The count will start as soon as you strike any pad Remaining time in sencond will be dis played in the right side and the current counting in the left side of the scren When the time is over You ll hear alarm sound for about one second The counting will stop Then you can check the results Press the ENTER button to start another examination Or press the EXIT button to exit this function Tip Sensitivity of the sriking for this test is adjustable Please see Chapter SETUP for more information 1 i Count Ti me E TNT n du KICK TOM TOM2 Toma SNARE CRASH RIDE HIHAT H PDL Gu CEA SE Sle KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL usc C
20. al with Edge amp choke 8 Hi Hat 8 Kick Hi Hat pedal Pad hoke 12 Ri Configuration edge and choke ide cymba without edge and choke 8 Hi Hat 8 Kick Hi Hat pedal Voice 4 18 Sound Effects Reverb effect with professional DSP processor Accomp amp Drum volume for Demo Master tuning count sensitivity Equalizer Setup Menu Advanced Sensitivity Dynamic range Velocity Curve Cross talk Hi Hat Pedal Reset Pad Edit Voice Volume Pan Pitch Reverb level Record 10 Songs Display Custom back light LCD Headphone Line In Out USB Power In HD 008 DIGITAL DRUM USER S MANUAL Shanghai Huaxin Musical Instrument Co Ltd 35 Lao Shan Yi Cun Shanghai 200120 China Tel 86 21 58820000 Fax 86 21 58783113 Email huaxin huaxin music com www huaxin music com Rev 2 04
21. alizer type per your taste The default setting is 001 Nor mal 1 Press the ENTER button to confirm your set ting and turn to the next parameter for editing e 002 cos 004 006 Loos Bright wid 007 008 Press the EXIT button to exit current edit and turn back to the parameter selection ISA c MasterTune Bi wo uu je er EXIT Fi 3 NAA 1 7 KICK TOM1 iani TOM2 SETUP 6 Advanced Parameter Edit Chapter DRUM KIT EDIT introduces the sound edit procedure The purpose of the sound edit is to change sound characteristics such as voice volume pan etc The target of advanced param eter edit is physical characteristics of pad such as sensitivity trigger curve etc Gm so GS KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL When the item name of Advanced is blinking press the ENTER button to confirm it Then the EDIT icon will appear and the default parameter Sensitivity will be shown and blinking You could change parameter by rotating the DATA knob Any parameter is assigned for each pad individually You must select a pad to edit The default pad is Tom1 with its icon blinking You PEN ao a may select pad to setup by pressing the pad 9 e n S t V e mm select button or strike the pad directly The icon KIT DEMA TEMPO CLICK of sel
22. ce quickly to engage the User Song mode with the indicator lighting The display will show All U Song If you don t select song after 3 second the first available user song number and name will appear on the display The tempo and time signature of the user song will appear on the second row of the display also The title of the song number section in the sec ond row of the display is SONG The display of it will be All then the first available user song number If you want to select a song you desire rotate the DATE knob to choose a song Then press the m button to start play the button indicator lights up When the user song is playing press the press the gt m button again to to stop the playing the indicator turns off Note f the interval between the first and sec ond pressing of the SONG button is longer than 2 seconds it ll turn to Kit mode instead of Song mode Note f you didn t record any song the display will show No u song After 3 second the mode will change to Kit select automatically Tip You may erase User Song in the User Song mode Please refer to the RECORD chapter in the Manual for details 3 EXIT THE SONG MODE You may noted that press the SONG button once to enter the Demo mode press the SONG but ton twice quickly to enter the Song mode Therefore in the Demo User Song mode press the SONG button again to exit the Demo User Song mode and turn to the Kit selec
23. e 1 Save edited drum kit as your own user kit Press the ENTER button User Kit with User kit number blinking will appear Rotate the DATA knob to choose number then press the ENTER button to confirm Note There are 30 built in preset User Kit All of them are the same as Kit 01 Standard When you save your own User Kit it must replace the existing one TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL If the saving is successful it ll turn to the Kit select mode The indicators of the pad select button and the EDIT button will turn off The EDIT icon will disappear The icon of the edited part will stop blink The display always asks Replace it Press the ENTER button to replace existing one with your new editing Press the EXIT button then change another number If you really don t want to cover any existing User Kit press the EXIT button in number selection stage and it will cover the current kit edited referring to the next sec DL ECH 1 ao SG tion in this page then turn to the Kit Select mode KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL ff se The User Kit setting is nonvolatile even the power turns off 2 Press the EXIT button to exit the edit mode and return to the Kit Selection mode without sav ing as User kit The indicators of the pad select button and the EDIT button will turn off
24. e n indicator will blink and the current tempo time LU signature are shown on the display Now it is L Dei ready for recording KICK TOM1 TOM2 TOM SNARE CRASH RIDE HIHAT H PDL AA v ka COUNT 1 Record After one meature count in the record starts immediately no matter you strike drum pad or t Nak 4 not If the metronome is turned on you can hear NY NI the metronome during the recording l The record indicator will keep blinking The record measure count will appear on the display CH amp m ces Press the button again to stop the Lafen c TOMS SNARE CRASH RIDE HIHAT recording The display will go to the save stage 2 Play back your recording After stop the recording press the Pm button x AS 4 to playback your recording Press m button d 7 Ue S 0 h td again to stop the playback mano mawa After you save the recording as User Song In e H CU the Song mode you can also select user song tr amp m c RC co to playback Please refer to the SONG chap KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL ter in this Manual for details 3 Save as a User Song i In the save operation the User Song number for saving your record will blink You may ro tate the DATE knob to choose song name Press the ENTER button to save recorded song press KK A the EXIT button to turn to the Kit Selection mode l Is U ser S ono without saving
25. e the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help TAKING CARE OF YOUR DRUM o DO NOT ATTEMPT TO OPEN THE UNIT OR MAKE ANY CHANGE IN THE CIRCUITS OR PARTS OF THE UNIT SERVICE AND MODIFICATION This product should be serviced by qualified service personnel when wthe power supply cord or the plug of the adaptor has been damaged wliquid has been spattered into the unit or it has been exposed to rain wthe instrument does not appear to operate normally or exhibits a marked change in performance wthe instrument has been dropped or the cabinet has been damaged HANDLING AND TRANSPORT wNever apply excessive force to the controls connectors pads or other parts of the instrument wAlways unplug cables by gripping the plug firmly not by pulling on the cable w Physical shocks caused by dropping bumping or placing heavy objects on the instrument can result in scratches and or more serious damage wCarefully check the amplifier volume control before stating to play Excessive volume can cause permanent hearing loss CLEANING wC lean the unit with a dry or light wet soft cloth Do not use paint thinner or petrochemical based polishes LOCATION wDo not expose the drum to the following conditions to avoid deformation discoloration or more se
26. ected pad will blink as well 0 D lea YY Note PER ox Tom omo Toma gt A D ppa 1 There is no alternative part such as rim edge HAHA can be selected The mark under the pad icon will never appear It is different from part selec tion procedure in DRUM KIT EDIT 2 Hi Hat pedal is not available for advanced edit After select the parameter and pad press the ENTER button to confirm The current value of the parameter will appear and blink Now you can change the value There are 4 advanced parameters can be edited They are IN m m L fm LC Sensitivity LI S ens t ve The pad sensitivity is ranged 1 127 Rotate KIT TEMPO CLICK the DATA knob to change it The higher value HE i lew UI refers to the higher sensitivity Please note a gt ce that if the sensitivity is too high it ll cause e A vm e SCH crash gt umat unexpected sound even if you don t strike the pad Press the ENTER button to confirm your setting and turn to the next parameter Press the EXIT button to exit current operation and back to Advanced window SETUP Dynamic Range This feature allows you to set playing strength which response with the maximum volume to accommodate your personal taste of performance Strike the pad with strength you desire with which you want to get the maximum volume The value will appear automatically per your striking the Max value is 127 Press the ENTER button to conf
27. edal PART DESCRIPTION ICON Snare Rim1 Snare Rim1 Hi Hat Open Hi Hat Close Crash Cymbal Bow Crash Cymbal Edge Ride Ride Cymbal Bow Ride Cymbal Edge ie Snare Snare Head Quote Only Kit B responses to the Ride Snare Rim2 Snare Rim2 IT DEI omi Tom1 Head 4 o 3 3 omi Rim Tom1 Rim CR Cl om2 Tom2 Head 4 o N Ei Nee om2 Rim Tom2 Rim UE VK om3 Tom3 Head a o a VK Tom3 Rim Tom3 Rim 4 E H ami v DRUM KIT EDIT hp 4 Select parameter to edit After select part the current parameter will be blinking Rotate the DATA knob to select a pa rameter to edit In this example select VOICE a The default parameter is VOICE BT XM tam GA VRIDE quar HPDE Press the ENTER button to confirm you choice HH ENTER lt Il i d J d 5 Edit the parameter The current contents of this parameter will blink In this example it is the voice number Rotate the DATA knob to change contents of the parameter In this example you ll change voice assigned to Snare rim1 Any parameter has its own range to set For example there are 418 TEL UE voices can be selected to assign to a part but ICU 4 4 only some could be assigned to particular part IL f Please see Appendix VOICE LIST for details Em g DDZ dm Press the ENTER button to confirm your setting Then it ll return
28. ext parameter to setup is metro nome volume The display will show Metro Vol and current volume is blinking Rotate the DATA knob to change the volume ranged 0 127 The default setting is 96 Press the ENTER button to confirm you setting and turn to the next parameter of the metronome L O ED fp amp e c 9e amp S KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL 3 Metronome Sound Setting After press the ENTER button to finish the volume setting the next parameter to setup is metronome eh ei sound The display will show MetroSound ii Jr L M e t KO S oun d and blinking current sound There are three KIT DEMO TEMPO CLICK types of the sound English Chinese and a a A Percussion ENG refers to English CHN refers to Chinese PRC refers to click sound Si eae e e en S The default setting is PRC Rotate the DATA knob to change the sound Press the ENTER button to confirm you setting and exit the metronome setting ODO C C 0O Fi You can press the EXIT button in any step to exit metronome setting During the setting the metronome will keep Percussion English Chinese sound Tip f you do not want to change the current setting simply press the ENTER button to skip it p METRONOME 2 TEMPO Press the TEMPO button its indicator will light up The current tempo value will blink in the second row of the display Rotate the DATA knob
29. igh Tom Tom Lo 19 Electronic Low Tom 2 Hat Op 11 Electronic Open 3 Tom Hi 25 Bk High Tom Tom Lo 20 R amp B Low Tom 1 Hat Op 12 FXS Open 2 Q Mid Tom 1 Tom Lo 21 Noise Low Tom 2 Hat Op 13 Standard Open 2 Q Mid Tom 2 Tom Lo 22 Power Low Tom 2 Hat Op 14 FXS Open 3 Standard Mid Tom 1 Tom Lo 23 Hard Low Tom 1 Hat Op 15 Electronic Open 4 Funk Mid Tom Tom Lo 24 Wood Low Tom 2 Hat Op 16 Wood Open Electronic Mid Tom 1 Tom Lo 25 Hat Op 17 Half Open Wood Mid Tom 1 Tom Lo26 Rock Low Tom 3 Hat Op 18 R amp B Open Rock Mid Tom 1 Tom Lo 27 Power Low Tom 3 Hat Op 19 Jazz Open 2 Power Mid Tom 1 Tom Lo28 R amp B Low Tom 2 HatPed1 Standard Pedal 1 Latin Mid Tom 1 Hat Cl 1 Rock Close 1 Hat Ped 2 Power Pedal Tom Mi 10 Rock Mid Tom 2 Hat Cl 2 Jazz Close 1 Hat Ped 3 Rock Pedal 1 Tom Mi 11 Latin Mid Tom 2 Hat CI 3 Standard Close 1 Hat Ped 4 Electronic Pedal Tom Mi 12 Standard Mid Tom 2 Hat CI 4 Funk Close 1 Hat Ped 5 Rock Pedal 2 Tom Mi 13 Rock Mid Tom 3 Hat CI 5 Rock Close 2 Hat Ped 6 Funk Pedal 1 Tom Mi 14 Room Mid Tom Hat CI 6 Funk Close 2 HatPed7 Jazz Pedal 1 Tom Mi 15 R amp B Mid Tom Hat Cl 7 Rock Close 3 Standard Crash 1 Tom Mi16 Electronic Mid Tom 2 Hat CI 8 Electronic Close 1 Standard Crash 2 Tom Mi 17 Jazz Mid Tom 1 Hat Cl9 Electronic Close 2 FXS Crash 1 Tom Mi 18 HipHop Mid Tom 1 Hat Cl10 Standard Close 2 HipHop Crash Tom Mi 19 HipHop Mid Tom 2 Hat Cl 11 Funk Close 3 DJ Crash VOICE LIST Description No Rock Crash 1 272 Rock Splash
30. irm your setting Press the EXIT button to exit current operation and back to Advanced menu Trigger Curve This feature allows you select a proper curve from 6 preset curves to control the relation between the striking force and changes in volume Change the curve until the response feels as natural as possible Rotate the DATA knob to choose a curve The corves you may select are Linear Exp1 Exp2 Log1 Log2 and Spline Press the ENTER button to confirm your setting Press the EXIT button to exit current operation and back to Advanced menu The default curve is Linear Cor COD 1 C 1 NOO Lu Gd CC a na Lac ot Logi Linear Exp1 Exp2 B B 2 S em e se EDIT DODE e amp KICK TOM1 TOM2 TOM3 SNARE V CRASH RIDE HIHAT H PDL Diagram of 4 types of the curve 2 e 3 3 E S Strength Strength Linear Exp Cross Talk When strike one pad other pad s will sound occasionally It is called cross talk It is a result of pads detecting the vibrations in the rack as you hit other pads This feature allows you to eliminate the cross interference among the pads The icon of the current pad is blinking when the Cross Talk is selected This pad is source of the cross talk which cross fire other pad s i e when strike this pad other pad s will sound The procedure of eliminating the cross talk is Volume Volume Strength
31. iun OI will show the kit number for editing rj amp m9 c S e MR TOM3 SNARE CRASH RIDE HIHAT H PDL 3 Select part to edit In the edit mode the numerical buttons refer to ees part select buttons Press a select button to V engage editing for this part the button indicator will light up Some instruments have two or more parts for example the snare have head rim1 and rim2 parts crash and ride cymbal has head and edge parts Hi Hat has open and close etc Press the button twice to select alternative part of this instrument Please note that the snare has 3 parts press the SNARE button once to select snare head twice for rim1 and treble for rim2 The relevant mark for alternative parts will peoa E aro wm oc X KICK TOM1 TOM2 TOM3 SNARI CRASH RIDE HIHAT H PDL HH EDIT appear Please refer to table below 1 When a part is selected the icon of this part blink EDIT icon will stop blink In this example 2 CRASH d the part selected is Rim1 of Snare 3 nine c When select part the part name will blink You 4 SNARE must press the ENTER button to confirm your part selection v A simple way to select part is to hit area of the pad you desire directly This is an aternative metrod of pressing the button When the part name blinking you also need to press the ENTER button to confirm your selection PART DESCRIPTION ICON HH Pedal Hi Hat P
32. ld When pedal position is lower than close threshold striking the Hi Hat pad makes close Hi Hat sound voice No 215 239 When press the pedal quickly and reach bottom position it ll make Hi Hat pedal sound voice No 259 265 and you don t need striking the Hi Hat pad The quicker the pressing the higher the volume of the pedal sound This bottom position is determined by Pedal Threshold The scale of Hi Hat pedal movement is 0 7 7 127 0 represents the lowest position of the rit Li 0c o S a T H R pedal completely pressed and 127 repre sents the highest position completely UEN raised 3 E This feature allows you to set thresholds per SS D Si Q E SCH gt amp amp your camiortable pressing siana Kick mom gx ns sans cmsu es ms y ANY The Close Threshold and Pedal Threshold Ch can be adjusted in the Sensitive settings by BAN pressing the H PEDAL button the Pedal icon 2 e O will blink The parameter will be Close THR G P and its current close threshold will be shown ay mmm Press the ENTER button to confirm your 4 5 SETUP choice Then press the pedal to position you desire as close threshold while the real thresh old value will be shown and blinking You could try sound change by striking Hi Hat pad Press the ENTER button to confirm and turn to the pedal threshold setting the parameter is Pedal THR Then set the Pedal threshold in the same way
33. ll be greatly enhanced For instance you can edit your playing in computer or playback MIDI song from computer while play the drum USB The USB connector allows you to connect the drum directly to your computer It can connected without driver installation under the Windows XP Windows Vista amp MAC OSX environment The drum will be recognized as USB Audio device to receive and transmit the same MIDI messages USB described above MIDI APPLICATION CHART Function Transmitted Recognized 0 127 Velocity Note ON 1 127 Note OFF Chanel 10 supports Bank O only f you need detailed information about Exclusive RPN and NRPN please contact your vender Note Transmited note through chanel 10 for each pad if fixed as below 10 64 Major Controls B9h 04h xxh Yes Hi Hat pedal control Bxh 79h 00h Yes Reset All Controller Bxh 7Bh 00h Yes All Notes OFF es Pap BlueSparkl NG D i O Ng Ca SpaceKit Sap MotoDrum Run ii 9 p 3 o O c 3 H es 3 O N 03 U04 Note Default assignment for all User Kits is Universal QUICK SELECTION UO U06 U07 U08 U09 U10 U11 U12 U13 U14 U15 U16 U17 U18 U19 U20 U21 U22 U23 U24 U25 O KIT LIST UserKit05 UserKit06 UserKit07 UserKit08 UserKit09 UserKit10 UserKit11 UserKit12 UserKit13 UserKit14 UserKit15 UserKit16 UserKit17 UserKit18 UserKit19 UserKit20 UserKit21 UserKit22 UserKit
34. n plug in the connector here PLAYING PAD TURN ON THE POWER 1 Adjust volume of external audio device connected with the drum to lower level 2 Press the POWER button while dont strike pad or press the Hi Hat control pedal 3 Turn on external devices connected 4 Strike pad and adjust the volume to proper level PLAYING PADS All pads have striking force sensitivity feature Strike the pad harder to make higher volume and strike the pad softer to make lower volume Playing Tom Drum Strike the central position head of the pad to make head sound strike the rim of the pad to make rim sound Rim Q oie The Rim feature is available with Kit B only Playing Cymbal Strike the central position bow of the cymbal to make cymbal sound strike the edge of the cymbal to make edge shot sound Bow Edge Cymbal Choke Strike a cymbal its sound will sustain Then squeeze the edge portion to mute the sound Please note that the Hi Hat has no choke feature Q ore The edge and choke feature for the ride cymbal is available with Kit B only Playing Snare Drum Strike the central position head of the pad to make head sound strike the rim of the pad to make rim sound There are two rim portions with different rim sound Also there is a mark on the pad to indicate the portion Mark Rim 1 Playing Hi Hat 1 Strike the Hi Hat pad without pressing the Hi Hat control pedal to make open Hi Hat s
35. n0 Kan HD 008 DIGITAL DRUM USER S MANUAL CAUTION CAUTION Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment WARNING When using electrical products basic safety precautions should always be followed including the following NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules Also this equipment has been tested and found to comply with the limits for following standard EN55022 2006 EN55024 1998 A1 2001 A2 2003 EN55013 2001 A1 2003 A3 2006 EN55020 2007 EN61000 3 2 2006 EN61000 3 3 1995 A1 2001 A2 2003 These limits are designed to provide reasonable protection against harmful interference in a resi dential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increas
36. nt Sec048 TEMPO CLICK ms let ul LI Ic u H en pa E c ss KICK TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL DEMO TEMPO CLICK ma le 914 TOM1 TOM2 Toma SNARE CRASH RIDE HIHAT H PDL ve x EF 2 SETUP In the Kit Selection or Demo Song stage x N d 7 press the SETUP button to enter the Setup mg A C C 0 MD V 0 pm mode and its indicator lights up The param ET cum eter to be setup will blink Rotate the DATA D iun ul knob to select one of the 7 items listed below nora then press the ENTER to confirm and its cur d Gel o cu NS rent value will be displayed In the item selection stage press the EXIT but ton to exit setup opration and turn to the Kit Selection mode 1 Accompaniment Volume for Demo When play demo song you may hear back ground music accompanied with percussion performance Adjust this background music volume with parameter Accomp Vol Rotate the DATE knob to change the volume ranged e 0 24 The default setting is 11 oe e d E SS perii Press the ENTER button to confirm your set ting and turn to the next parameter for editing Press the EXIT button to exit current edit and turn back to the parameter selection 2 Percussion Volume for Demo wt tt When play demo song you may adjust per CUCI TI cussion volume Adjust this volume
37. om Mi 21 Wood Mid Tom 2 Hat Cl 13 R8B Close 1 Q High Tom 2 Tom Mi 22 Mute Mid Tom Hat Cl14 Standard Close 3 Q High Tom 3 Tom Mi 23 Power Mid Tom 2 Hat Cl 15 FXS Close 1 Q High Tom 4 Tom Mi 24 Fusion Mid Tom Hat Cl16 Standard Close 4 Standard High Tom Tom Mi 25 Q Mid Tom 3 Hat Cl 17 Jazz Close 2 Rock High Tom 1 Q Low Tom 1 Hat Cl 18 FXS Close 2 Jazz High Tom 1 Q Low Tom 2 Hat CI 19 Electronic Close 3 Funk High Tom Standard Low Tom 1 Hat Cl 21 Rock Close 5 Tom Hi 10 Electronic High Tom 1 Rock Low Tom 1 Hat Cl 22 Tom Hi 11 Latin High Tom 1 FXS Low Tom Hat Cl23 Standard Close 5 Tom Hi 12 R amp B High Tom Jazz Low Tom 1 Hat CI 24 Standard Close 6 Tom Hi13 FXS High Tom 1 Rock Low Tom 2 Hat Cl 25 Rock Close 6 Tom Hi 14 Rock High Tom 3 Funk Low Tom Hat Op1 Standard Open 1 Tom Hi15 Jazz High Tom 2 Tom Lo 10 Jazz Low Tom 2 Hat Op 2 Jazz Open 1 Tom Hi 16 Old High Tom Tom Lo 11 Latin Low Tom 2 Hat Op 3 Tom Hi 17 Rock High Tom 4 Tom Lo 12 Jazz Low Tom 3 Hat Op 4 Rock Open 1 Tom Hi 18 Wood High Tom 1 Tom Lo 13 Power Low Tom 1 Hat Op 5 Electronic Open 1 Tom Hi 19 Electronic High Tom 2 Tom Lo 14 Standard Low Tom 2 Hat Op 6 Electronic Open 2 Tom Hi 20 Wood High Tom 2 Tom Lo 15 Hat Op 7 Funk Open 1 Tom Hi 21 FXS High Tom 2 Tom Lo 16 Wood Low Tom 1 Hat Op 8 FXS Open 1 Tom Hi 22 Power High Tom Tom Lo 17 Electronic Low Tom 1 Hat Op 9 Rock Open 2 Tom Hi 23 Step High Tom Tom Lo 18 Noise Low Tom 1 Hat Op 10 Funk Open 2 Tom Hi 24 Room H
38. ound 2 Strike the Hi Hat pad with fully pressing the Hi Hat control pedal to make close Hi Hat sound 3 Strike the Hi Hat pad while pressing the Hi Hat control pedal gradually to make consecutive open to close Hi Hat sound 4 Press the Hi Hat pedal down quickly to make Hi Hat pedal sound ng Playing Kick Drum Press the Kick drum pedal to make kick drum sound MASTER VOLUME Ti kik i IE Ma ster WT o Th d d c m D amp c S e amp Tom TOMZ Vol In the Kit and Song window push the DATA knob the current master volume level will be blinking Rotate the DATA knob to change the volume ranged 0 127 After about 5 seconds without any operation it will return to the previous window P DRUM KIT There are 50 preset drum kits and 30 User Kits The kit is combination of different instrument voice assigned to each pad which has unitary style for performance All the kits are for your choice Any kit could be edited and saved as your own User Kit After power on and display initial information it ll enter the kit selection mode automati cally while the KIT button indicator will light up The kit number and its name will be displayed The kit number also appears in the second row of the display In some other operation modes you may press the KIT button to enter the kit select operation mode PRESET KIT The title of the kit number section in the sec ond row of
39. rious damage direct sunlight near a window high temperatures near a heat source outside or in a car during the daytime rain or excessive humidity excessive dust strong vibration w The unit shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the unit wThe drum contains digital circuitry and may cause interference if placed too close to radio or television receivers If interference occurs move the drum further away from the affected equipment POWER wOnly use attached power adaptor wTurn the power switch off when the drum is not in use wTo avoid damage to the drum and other devices to which it is connected turn the power switches of all related devices off prior to connection or disconnection of audio cables wTurn the power off if the main cable of the adaptor is damaged or the instrument is spattered with liquid wDo not switch the unit on and off in quick succession this places an undue load on the electronic components wUnplug the AC power cord during an electri cal storm wAvoid plugging the AC adaptor into the same AC outlet as appliances with high power consumption such as electric heaters or ovens CONTENTS TABLE CONFIGURATION 1 INSTALLATION 2 KIEA rr 2 KIT Bes e tie geci Dece ae ea dia t ae Ad d 5 SOUND MODULE 10 Control Panel es 10
40. s the differences between Kit A and Kit B Ride Without edge With edge Tom pad in Kit B has rim shot feature but Kit A not Ride cymbal in Kit B has edge strike and choke features but Kit A not This manual is universal for both Kit A and Kit B Some contents are for Kit B only They are indi cated by B Note Please read carefully to suit your Kit The installation of Kit A and Kit B is different Please read the next chapter for details INSTALLATION KIT A CRASH A 12 Cymbal edg RIDE A 12 Cymbal HI HAT A 8 Hi Hat SOUND MODULE KICK B 8 Kick HI HAT CONTROLLER B HH Ctrl KICK PEDAL P 6C Kick pedal KICK PEDAL IS OPTIONA ACCESORY j The drawing shows complete drum kit after your installation Each drum pad cymbal pad and Hi Hat control pedal has its part number underneath the part name for your reference in installation The part number is printed in part packing box Power adaptor and connection cables are not shown in the drawing INSTALLATION KIT A RACK SYSTEM Wing nuts L Rod Pad clamp Rack clamp Rack System RACKA Folded rack in package E 8 You can find all of these components in RACK SYSTEM RACKA package Ich In e gt Hi Hat rod D U O gt
41. stics such as voice volume reverb level and Pan etc The detailed description is listed In the table below PARAMETER DESCRIPTION EDIT RANGE VOICE Voice assigned to the part 1 418 VOLUME Volume of the part 127 refers to the highest volume 0 127 PAN Stereo pan of the part 64 refers to the most left 63 refers to the most right O refers to the center position 64 63 PITCH Pitch of the part 10 refers to the lowest and 10 to the highest pitch 10 10 REVERB Reverb effect level of the part 127 refers to the highest level 0 127 The edit feature is to set parameter for each part partly or for all parts in a kit the Edit feature makes it possible to change the currently selected drum kit setting In this way you may create your own drum kit and save it as UserKit The edit procedure is the same for every parameter Assigning voice to the part is one of the most important function After you are familiar with the operation of voice assignment it ll be easy to edit other parameters The following section is the edit procedure taking example how to change voice for a pad 1 Select kit for editing Select a kit for editing in the same way explained in the DRUM KIT chapter The display shows the kit number and kit name DRUM KIT EDIT 2 Enter the Edit Mode Mu d d Press the EDIT button to engage the edit mode The EDIT indicator will light up while the EDIT E E t M 0 A icon on the display will blink Also the display n n
42. tart play the button indicator lights up When select single song it ll be played repeatedly When the demo song is playing press the m button again to to stop the playing the indicator turns off 2 Practice with Demo Song You may practice your own performance with the demo song There are three modes for your practice FULL When press the m button you will hear complete song DRUM ONLY When press the king button you will hear drum sound only It helps you to get idea how to perform drum DRUM MUTE When press the m button you will hear background music without drum sound Then you can play drums by yourself Press the MODE button repeatedly to change the mode Tip Volume of the background music and drum of the demo song is adjustable separately Please see Chapter SETUP for more information The screen will turn back to the previous win dow automatically after 5 seconds or press the EXIT button to exit immediately Demo song indicator oppe ees S KICK TOMI TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL Demo Song Number N SONG XN NG m L COUNT N D T D Ni dia bi Song Name UiDrum Mute KIT DEMO TEMPO CLICK E ri LI i Oi io on D amp m c S em TOM1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL MODE e D 2 USER SONG There are 10 User songs in maximum recorded by user Press the Song button twi
43. the display is KIT for preset kit The kit number is ranged 01 50 Rotate the Data knob to select a kit you desire Rotate the knob clockwise to increase the kit number and anticlockwise to decrease the kit number All preset kit number and name are listed in the Appendix KIT LIST USER KIT You can create your own user kit by edit function Click the KIT button repeatealy will switch the Preset Kit and User Kit selection The User Kit number is U01 U30 The title of the kit number section in the second row of the display is USER KIT Rotate the Data knob to select an user kit you desire Rotate the knob clockwise to in crease the kit number and anticlockwise to decrease the kit number The factory setting for all User Kits is Uni versal Kit You could call them even if you don t create your own user kit Of course you could replace it by editing Please see EDIT Chapter in this manual for details Press the KIT button again to back to the pre set kit QUICK SELECTION There are 9 numeric buttons each one is as signed to a most common use kit In the kit select mode simply press a button to select kit directly The default quick selection as signment is listed in the Appendix KIT LIST gt After you select a kit you could assign it to a numeric button by pressing the KIT button and a numeric button simultaneously Your assignment is nonvolatile even the power turns off Preset kit indicator Kit number Kit
44. tion mode The SONG indicator turns off Or you can simply press the EXIT button to stop palying exit the Demo Song mode and turn to the Kit selection mode User song indicator 8 E p Ga ce 9 amp KICK Tom1 TOM2 TOM3 SNARE CRASH RIDE HIHAT H PDL User Song Number ui Name KICK TOM TOM3 SNARE CRASH RIDE HIHA H PDL Tempo Time Signature CLICK Quo X SNARE CRASH RIDE HIHAT H PDL KICK TOM1 TOM2 Tom3 SONG METRONOME 1 METRONOME KIT N VC ucW TEMPO Press the CLICK button to sound the metro f 8 nome and its indicator will light up Press the CT N button again to stop it Press the CLICK button twice to setup the metronome and the indicator blinks 1 Time Signature Setting At first you Ver N jt could set the time signature The the current mw Na time signature will blink in the second row of B the display Rotate the DATA knob to change KICK TOM mem TOMS SNARE CRASH RIDE HIHAT HPOL the time signature Available time signature is 1 8 2 1 8 4 1 8 8 1 8 16 The default setting KIT x CHCH 7 TEMPO is 4 4 Press the ENTER button to confirm you setting and turn to the next parameter of the metronome 2 Metronome Volume Setting After press the ENTER button to finish the time signature setting the n
45. to the parameter selection op eration stage 6 Edit another parameter or part Now the parameter the VOICE in this example editing for a selected part is finished You may continue to edit other parameters in this part or change part to edit 1 Edit other parameter in the current part After you press the ENTER button to finish cur rent editing it ll turn back to the parameter se S d ES ZS ag NS pe lection stage with the next parameter blinking i V SUP Press the ENTER button to edit this parameter or select other parameter by rotating the DATA knob Then edit parameters in the same way explained in the Step 4 Step 5 above Param eters can be edited are listed in the table in page 11 2 Edit another part Select another part to edit in the same way explained in Page 12 The current parameter to edit will keep no change It provides you easy method to edit the same parameter e g voice for each part Note There is exception In the Cross Talk edit procedure press pad selection button to choose a pad generating cross talk badly instead of change part DRUM KIT EDIT 7 Complete the edit After finish all editing job for the current drum kit S a V e t no matter single or multiple part parameter you may terminate the edit na EG Pr Sn uf Press the EXIT button Save it Then you oi IU wi have two choices a CH fH gt
46. urn to the Setup parameter selection Reset Setup Reset changes in Setup E operation When ResetSetup is blinking press the ENTER button The display will show D inn AreYouSure Press the ENTER button to con eK quio paa firm and return to the Kit Selection mode Or press the EXIT button to return to the Setup parameter selection Reset Song Erase all songs recorded by user When Reset Song is blinking press the EN TER button Press the ENTER button to con firm or press the EXIT button to cancel Then it ll return to the Setup parameter selection Reset All Besides reset all items above it also reset physical parameter changes in kits which changed during the kit advanced editing When Reset All is blinking press the ENTER button m Press the ENTER button to confirm or press Hj a KI WI GT ng ET NN the EXIT button to cancel Then it ll return to the Setup parameter selection Note 1 Don not strike any pad after press the EN TER button until it back to the Setup parameter stage or Kit Selection mode It needs couple of second 2 When enter the Setup mode from the Demo song stage the reset operation is not available a1 1010 513 Before recording you should prepar neccessary settings including drum kit metronome tempo time signature etc Press the button to enter the record mode Th
47. with pa IL D D rum V 0 rameter D Drum Vol Rotate the DATE knob T no Tin Uii to change the volume ranged 0 24 The de LE ICU il 1 fault setting is 11 L Press the ENTER button to confirm your set Kick roms ting and turn to the next parameter for editing Press the EXIT button to cancle current edit and turn back to the parameter selection Press the EXIT button to exit current edit and turn back to the parameter selection SETUP 3 Master Tune This parameter affects sound pitch globally Rotate the DATE knob to change the mas ter tuning ranged 0 to 50 The default Set ting is O which refers to 440 Hz at A1 note Press the ENTER button to confirm your set ting and turn to the next parameter for editing Press the EXIT button to exit current edit and turn back to the parameter selection 4 Count Sensitivity The parameter for the sensitivity of the count examination Rotate the DATE knob to change the sensitivity ranged 0 24 The de fault setting is 16 It is suggested to set the sensitivity lower than your normal performance Press the ENTER button to confirm your set ting and turn to the next parameter for editing Press the EXIT button to exit current edit and turn back to the parameter selection 5 Equalizer Tone of the drum could be adjusted globally by built in Equalizer There are 8 types of pre set equalizer listed below Rotate the DATE knob to select equ
Download Pdf Manuals
Related Search