USER`S MANUAL
Contents
1. Service Procedures There are no user serviceable parts within the SootDAP sound system unit Should the unit cease to function it must be returned to your SpotDAP provider or to RSF for repair or replacement Warranty Statement Refer to the separate warranty card provided with this manual Contact RSF Before contacting RSF directly please contact your SootDAP provider They should know more about your particular installation and may be in a position to provide faster service RSF France 45 av Marcel Dassault Parc de la Plaine F 31500 TOULOUSE FRANCE PHONE 33 5 61 20 79 09 E MAIL rsf rsf europe com RSF EUROPE International 10 B route d Arlon L 7471 SAEUL G D LUXEMBOURG PHONE 352 49 74 20 40 FAX 352 49 74 20 50 E MAIL info rsf int com www rsf int com Directed Audio Sound System MODEL SpotDAPaso l Nr YY Lu ZZ SpotDAP LER ER SEER ERS ESAS SpotDAP450 CONTENTS Important Safety Instructions sisswisessaesesreavissinomnonstenvecanvenss 23 Unpacking and Inspection Instructions essesssssssesceesrssssss 4 Operating MAS CHUGH ONS neieiisisessoreriisseissiriirnsonniasartaiianr saini I7 AYL2 11 G11 cl Oe nvr NOR reo rece 8 Installation Notes arxcairencusianat erences 9 10 Troubleshooting FAQ sessssssssseeerssssssssssceeeosssssssssceeeessssssss 11 14 PONG AMONG srunsa iaeueeanuirabatesented 15 General Specifications c cessesssessesseessessessscs2. preclude general broadcast address but communications are required SpotDAP can transform signs placards and surfaces into virtual speakers Virtual Mode applications allow units to be placed without cabinet or hardware at the desired sound location By projecting sound with a SpotDAP unit a simple display sign can act as a speaker without wiring or changing the sign s appearance You can beam the SpotDAP sound to specific endcaps or aisle displays or send sound across the room without uncomfortable and unwanted volume from loudspeakers SpotDAP can turn a wall into an information sound center by adding sound to coupon panels and directional signage to increase interest The superior control that SootDAP offers will grant freedom to use sound as never before to audio engineers architects and environmental designers Audio use will be well defined and more impactful with highly controlled audio placement selective access to that audio and freedom from the need to use high levels of sound to get audio across a distance Maintain the environmental requirements as outlined in the section on Installation and Setup and the Safety Instructions Cleaning Keep the SpotDAP unit free of dust accumulation To clean the emitter surface use only low pressure less than 10 PSI compressed air available in small spray cans from an electronics store Use only a dry cloth to remove dust from the exterior of the SootDAP unit DO NOT attem
3. input channels summed together on the RCA connectors Max Input Level Before Clipping 160 mVrms x1 channel or 80 mVrms x 2 channels System Bandpass Filtering Max Audio SPL Output 400Hz to 16KHz SpotDAP450 85db 1KHz 1 meter SpotDAP460 91db 1KHz 1 meter POWER AMPLIFICATION ALL UNITS Amplifier Type Proprietary Modulation Amplifier MODAMP APPLICATIONS The power to restrict sound to a specific area without imposing on nearby activities has endless possibilities for use The SootDAP uses HyperSonic Sounds HSS a pioneering sound generation technology that gets your audio message right to your audience The HSS technology a highly directional ultrasonic column places sound only where it is intended Sound does not spread to the sides or rear of a SootDAP unit eliminating the problem of uncomfortable and unwanted noise pollution produced by conventional speakers a Directory kiosks in a shopping mall Store displays introducing a new product Art display information directed to patrons at art museums Directions at an amusement park Display booths at trade shows m Speakers in an office space m Internet access kiosks in public areas Audio video conferences in different languages from a single device Point of purchase advertising or language department messaging Providing hearing impaired sections in churches and schools HSS technology can be used anywhere noise abatement requirements
4. Do not attempt to operate the unit Immediately file a damage claim with the delivery carrier Contact RSF for repair or replacement instructions Retain all packing materials SpotDAP Unit Controls Indentification 48 VDC LINEIN a 6 123 EQ SETTING Status LED DC Power Jack RCA 1 RCA 2 Equalizer Settings OPERATING INSTRUCTIONS Controls NOTE It is strongly suggested that all audio connections are made with the SpotDAP unit s power turned off Audio Input Unbalanced audio inputs are connected to the two RCA connectors 48 VDC LINEIN Eo L 123 R O EQ SETTING o E Q 4 The SpotDAP unit is designed to accept line level stereo audio inputs from various CD stereo or multimedia devices The SpotDAP unit internally sums the stereo input One or both of the RCA connectors can be used to input an audio source See page 16 for acceptable audio input levels Connecting Power Make sure the AC cord is properly plugged into the AC DC power supply Then plug the DC jack into the SpotDAP unit Plug the AC plug into a properly grounded AC outlet The Status LED indicator on the SpotDAP unit will display green indicating the SootDAP unit is on and functioning There is no power switch on the SpotDAP unit The SpotDAP unit will automatically turn on if the AC DC power supply is on The LED on the AC DC power supply will display green if AC power is present 48 VDC LINEIN E 123
5. EQ SETTING O STATUS ROC Power supply LED 5 GENERAL SPECIFICATIONS CSA ENVIRONMENTAL Operating Temperature Storage Temperature Storage Humidity Range SAFETY REGULATIONS G For Professional Use Only t WS 0 C to 40 C 32 F to 104 F 0 C to 50 C 32 F to 122 F Operating Humidity Range 0 to 95 non condensing 0 to 95 non condensing CE C Low Voltage Directive 73 23 EEC including amendments EMC Directive 89 336 EEC EN60065 1998 EN55103 1 EN55022 1998 EN55103 1996 EN55103 1 Annex A EN55103 1 Annex B EN61000 3 2 1995 EN61000 3 3 1995 EN55103 2 EN55014 1993 EN61000 4 2 1995 EN61000 4 3 1995 EN61000 4 4 1995 EN61000 4 5 1995 EN61000 4 6 1994 EN61000 4 11 1994 EN55103 2 Annex A EN55103 2 Annex B Safety for Audio Video amp Musical Instruments Apparatus for Household Commercial and Similar General Use Emissions tests Conducted Emissions Radiated Disturbance Power Radiated Magnetic Fields Inrush Current Measurements Powerline Harmonics Powerline Flicker Immunity tests Discontinuous Disturbance Click test Electrostatic Discharge Immunity Radio Frequency Immunity Electrical Fast Transient Burst Immunity Power Line Surge Immunity RF Common Mode Immunity Voltage Dips amp Short Interruptions Immunity Magnetic Fields Audio Frequency Common Mode 18 PERATING INSTRUCTIONS GENERAL SPECIFICATIONS ELECTR
6. ICAL AC Power Cord Length 1 83 m 6 ft Volume POWER REQUIREMENTS Wattage 100 watts maximum Volume is controlled by the audio source device ELECTRICAL RATINGS The SpotDAP unit is designed to accept line level stereo Input 100V 240V AC Universal power supply 50V 60 Hz Output 48V DC 1 5 Amps maximum audio input into the RCA style connectors from audio sources such as CD players DVD players stereos or other multimedia devices These devices must have volume MECHANICAL Physical Dimensions Depth Front Back Height Top Bottom Width Left Right SpotDAP450 3 47 x 5 96 x 12 25 88 1mm x 151 4mm x 311 1 mm control in order to adjust the output level of the SootDAP unit SHIPPING WEIGHT Approximate When the SpotDAP unit detects that the incoming signal is SpotDAP450 6lbs greatly beyond the input rating of the unit it automatically UNIT WEIGHT lowers the signal until the user can adjust the input level to SpotDAP450 2 2 Ibs within limits The Limiter recovery is typically only for a few seconds Adjust source volume level to reduce limiting frequency for the most consistent output volume The Status LED will flash red when the limiter is working PERATING INSTRUCTIONS Operating the SpotDAP Unit Connect the AC DC power supply to the SpotDAP unit first then to the correct voltage power source The SpotDAP unit will automatically turn on The Status LED wil show green See page 5 for more detail in c
7. e a a a E a i Lt Ma P 4 Tt s i m i AALA 4 Ai ge SIMMER LJ ar MPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that product heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Unplug this apparatus during lightning storms or when unused for long periods of time 13 Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or m
8. ersion m 23 Do not expose apparatus to dripping or splashing Do not place objects filled with liquids such as vases on the appara tus Distance m 24 At no time should you aim the emitter directly into the ear canal of an individual at less than 3 feet 1 meter distance 25 DO NOT exceed the storage and operating temperature of the SpotDAP unit see page 18 20 GENERAL SPECIFICATIONS UNPACKING AND INSPECTION INSTRUCTIONS SAFETY REGULATIONS cont d Unpacking the Carton OSHA USA OSHA Technical Manual Section Ill Chapter 5 Section V Table Il 5 4 TLV s For Ultrasound FDA USA the FDA has assigned the following Accession Numbers to the SpotDAP HSS products 0181485 and 0191486 FCC This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try t
9. ibration Although the SpotDAP unit is not particularly sensitive to vibration use sound judgment as you would when installing any electronic device Dust and Dirt Avoid installing the SootDAP unit where the emitter will be subjected to excessive dust and dirt See the Maintenance section page 8 for details on managing environmental dust Contact SootDAP Service at 352 49 74 20 40 or support rsf int com for information on operating the SpotDAP unit in an excessive dust or dirt environment Ventilation Keep the SpotDAP unit s vents unblocked A minimum clearance of 3 inches 7 5 cm should be maintained to allow unrestricted ventilation with convected airflow Technical Engineering Questions How much AC power is needed See the General Specifications section on page 17 for power requirements Does feedback occur using a live microphone with a SpotDAP system SpotDAP systems allow you to direct the produced audio away from any live microphone significantly reducing the tendency for feedback Additionally SpotDAP signal processing further reduces the potential for feedback What governmental or safety agency approvals are required for SootDAP SpotDAP systems manufactured for RSF by American Technology Corporation ATC will meet and or exceed the following government and safety requirements and regulations CSA SH For Professional Use Only cee CE m OSHA USA OSHA Technical Manual Section IIl Chapter 5 Sec
10. iginate from the loudspeaker location and which radiates in all directions SootDAP provides greater control of sound placement and volume What are some typical applications for SpotDAP technology Refer to the Applications section on page 15 for examples of different SpotDAP aplications What is the diameter and the directivity of the ultrasonic beam and what affects it The ultrasonic beam is comparable in diameter to the active surface area of the SpotDAP emitter array See the Audio Dispersion charts on page 20 for the SpotDAP450 and SpotDAP460 to understand the beams dispersion over distance The ultrasonic beam follows the dispersion chart until it hits a reflective surface The directivity of the SpotDAP unit allows intelligible audio to be heard at 25 meters or more under ideal conditions The audio source content and ambient background noise level will impact this distance Contact an RSF Applications Engineer at 352 49 74 20 40 or support rsf int com for more information
11. ners who are near a sign display or other object are to hear the sound as though a speaker was at that location use Virtual Mode This requires that a surface suitable for reflecting the HSS ultrasound be present at the location Once the location for the SpotDAP unit is selected choose the appropriate mounting hardware Provide access for the audio source cables and AC DC power supply aye Direct Wed Virtual Mode 10 ROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS FAQ Troubleshooting If the SootDAP unit does not generate sound m Check green LED is on at SpotDAP I O panel Check that the AC DC power supply is on and the DC plug is in the SootDAP unit Check the volume level of your external audio source Unplug the AC power check the audio input connectors at the SpotDAP unit and source connection points wait one minute and plug the AC power back in Unplug the AC power and check that there is source material CD DVD tape etc in the audio source device Check that the audio source device is on Check that the volume control of the audio source device is not turned to minimum or off Wait one minute and plug the AC back in Frequently Asked Questions The SpotDAP uses the HSS technology but what is HSS HyperSonic Sound HSS is a proprietary parametric sound generator developed and refined in the labs of American Technology Corporation ATC The SpotDAP is based on the HSS technology and is man
12. o correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Packaging Specifications The packaging for SpotDAP is suitable for common parcel shipment It meets the International Safe Transit Association Procedure 1A pre shipment test specifications Structures and methods utilized in this system are patented under one or more US and International patents Additional US and International patents pending US 6 606 389 US 6 011 855 US 6 577 738 US 6 466 674 US 6 229 899 US 6 108 427 US 5 889 870 US 6 584 205 US 6 359 990 19 Carefully remove the SpotDAP unit from the packaging carton Gently remove the protective bag from around the unit Be particularly careful not to bend or deform the front emitter surface or allow any foreign objects to come into contact with the emitter surface the silver copper foil surface behind the front grill Items Included 1 SpotDAP Audio Sound System unit model is indi cated on the rear panel User s Manual Warranty Card AC Power Cord AC DC Power Supply Carefully inspect the device for any obvious physical damage If there is evidence of any damage STOP Do not plug the device into AC power
13. oisture does not operate normally or has been dropped WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture WARNING Use this product only with an outlet that provides a protective earthing connection 16 DO NOT allow foreign objects to pass through the grill face or touch the emitter r IMPORTANT SAFETY INSTRUCTIONS 17 VAN CAUTION DO NOT operate unit with the front grill removed GENERAL SPECIFICATIONS m Performance Charts Beam dispersion at 3KHZ 18 Keep a 3 inch minimum spacing distance around the apparatus for sufficient ventilation SpotDAP450 Horizontal 1 60 ee ro 19 Due to the potential of extreme temperatures do not place this unit in direct sunlight for extended periods of time SD 3b 0 00 GED db Dispersion m 20 Medical research indicates that the levels of ultrasound used in the SpotDAP device are not harmful As you would with any loudspeaker it is recommended that you follow prudent safety procedures Distance m 21 For best results when operating the SpotDAP unit in Direct Mode pointed directly towards the intended listener it is recommended that you maintain a distance greater than 6 feet 2 meters between the SpotDAP unit and the listener SpotDAP450 Vertical GD 3b 22 This product is approved for indoor use only GD db Disp
14. onnecting the AC DC power supply to the SpotDAP unit Adjusting the SpotDAP unit volume l NOTE It is always best to begin with a low volume level at the source The SpotDAP unit requires audio from a line level external audio source with volume control such as a CD player DVD player or MP3 player Stop the external audio source Connect the RCA cables Turn the external audio sound on Adjust the external audio source s volume until you reach the desired level from the SpotDAP unit When the SpotDAP unit detects that incoming signals are signifi cantly beyond the input rating of the unit it automatically lowers the signal until the limiter can reduce the input level to within operating limits Adjusting the SpotDAP EQ settings The SpotDAP unit comes programed with 3 selectable EQ settings See page 22 for frequency response plots showing the effect of each EQ setting The factory default is EQ setting 1 1 Normal 2 Bass Cut 3 Bass Boost 123 EQ SETTING NERAL SPECIFICATIONS SYSTEM MODEL Nos SpotDAP450 SpotDAP460 ULTRASONIC amp DSP PROCESSING Carrier Frequency Variable 40 50 kHz Modulation Method Proprietary Dynamic Double Sideband ULTRASONIC EMITTER Type Proprietary Monolithic Film Transducer AUDIO Analog Input Section Input Impedance 10k Ohms A D Converter 16 bit Input Connector 2 RCA style connectors Input Channels RCA1 RCA2 System Configuration Monaural Two
15. pt to clean the surface of the emitter with anything other than compressed air at less than 10 PSI Servicing the HSS unit The SpotDAP unit has no user serviceable parts Contact RSF if service is required RSF France 45 av Marcel Dassault Parc de la Plaine F 31500 TOULOUSE FRANCE PHONE 33 5 61 20 79 09 E MAIL fab rsf europe com RSF EUROPE International 10 B route d Arlon L 7471 SAEUL G D LUXEMBOURG PHONE 352 49 74 20 40 FAX 352 49 74 20 50 E MAIL info rsf int com www rsf int com INSTALLATION NOTES TROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS FAQ NOTE CAUTIONS ON HANDLING Use caution when handling the device Be sure that no foreign objects come into contact with the emitter surface the silver copper foil surface behind the front grill Set up Environment Temperature Do not expose the SpotDAP unit to direct sunlight for extended periods as the emitter in the SootDAP unit can be damaged by extremes of heat or cold Observe and maintain the temperature limits as described in the General Specifications section page 18 Humidity Avoid direct exposure to water If the SootDAP unit is moved and the temperature change causes condensation on the unit allow the emitter surface to dry unaided before applying power Observe and maintain the humidity limits as described in the General Specifications section page 18 Vibration Any electronic device can be affected by excessive v
16. scesecsecsceseeseeees 16 23 Warranty Service Contact Information Back Cover GENERAL SPECIFICATIONS m Performace Charts cont d Important Safety Instructions SpotDAP450 Frequency Response e E e a EE WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture CAUTION __DONOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PASS QUVRIR ZAA S Tr PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage A N within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance 22 GENERAL SPECIFICATIONS al Performace Charts cont d 21 Ti ttti 7 j LE TR y gyun mi tt Fi Jatt Uy 1 i HH fa LEE X i F kal ee Ie F Fi TF Polar Plot SootDAP450 Horizontal Placement ap ne I ap aa e a t ae a a aa ee Fp ol T a AA a e ja ee oo fs en Pa ok a ie de a P ee Se ae i ae ae p ie 3 i KF at Ts n ee fn x ts he a ie a 1 ae Fe ee ee a 4 e
17. tion V Table III 5 4 TLV s For Ultrasound FDA USA American Technology Corporation ATC has submitted the applicable reports to the FDA pursuant to Title 21 CFR subchapter J as it pertains to ultrasonic devices for other than medical device applications The abbreviated report is pursuant to Section 1002 12 of the regulations According to this report the FDA has assigned the following Accession numbers to SpotDAP HSS products 0181485 and 0191486 m FCC USA This device complies with the FCC Rules for a Class A Digital Apparatus 14 TRO UBLESHOOTING AND FREQUENTLY ASKED QUESTIONS FAQ SpotDAP Commercialism How loud is SpotDAP At the current stage of development SpotDAP can produce in excess of 85 dB of peak audible sound at 1 meter How does SpotDAP mount to a wall or other location A standard mounting bracket is available However many users provide their own mounting brackets designed specifically for their unique application Are there any mounting restrictions SpotDAP can be mounted just about anywhere indoors provided the environmental specifications are met SootDAP should be mounted securely so it remains focused or aimed in the correct direction SootDAP has no rear sound wave and can be mounted directly on a wall or other hard surface when adequate ventilation is provided SootDAP can also be embedded inside other displays What is the usable frequency bandwidth of the a
18. udio Audio bandwidth is dependent primarily on the maximum audio SPL required and secondarily on the size of the emitter array The useful frequency range is 400 Hz 16 kHz There are 3 EQ settings to adjust the audio tone of the SootDAP unit under different operating conditions What is the warranty period SpotDAP systems from RSF are provided with a one year limited warranty How do I get SpotDAP service if required Please call RSF Technical Service at 352 49 74 20 40 or email supportl rsf int com to obtain authorization RMA to return the unit for repair or replacement See the warranty card provided with the SpotDAP unit for additional information 13 TALLATION NOTES Select an installation location that is consistent with the various environmental concerns on pages 2 and 3 Determine which mode the SpotDAP unit will be used in before selecting a location Virtual Mode will require an unbroken line of approach from the emitter of the SpotDAP unit to the area being used as a virtual speaker Direct Mode requires a clear line of approach from the SpotDAP unit to the point where the listener will be while hearing the audio To restrict the audio only to those in a specific area use Direct Mode Place the SpotDAP unit so that the emitter is pointed at the spot where you wish audio to be heard For maximum isolation of the sound point consider mounting the SpotDAP unit directly overhead of the listening point If liste
19. ufactured by ATC to RSF s specifications The SpotDAP offers many advantages over conventional loudspeaker systems What is a parametric sound generator A parametric sound generator produces directional audio from ultrasonic sound that we can hear SpotDAP is an advanced type of a parametric sound generator What are the advantages of SpotDAP sound reproduction systems over conventional loudspeakers SpotDAP creates a very directional beam of sound similar to the light from a flashlight which can be controlled and directed as desired This directional focus can be used to Deliver sound to a specific area or person Deliver sound to areas which are either physically impossible to access or too costly to install conventional loudspeakers create virtual sound sources Move sound around a room in real time 11 ROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS FAQ What is a virtual sound source A virtual sound source creates the illusion of sound coming from a surface or direction where no physical loudspeaker is present The place from which the listener perceives the sound to be coming is called a Virtual Loudspeaker or a Virtual Sound Source How does SpotDAP operate differently from conventional loudspeakers SpotDAP produces sound using highly directional ultrasonic frequencies This sound is sent to the specific location where it is to be heard Conventional loudspeakers generate audible sound which can only or
Download Pdf Manuals
Related Search