USER MANUAL
Contents
1. LIMITED WARRANTY Kramer Electronics hereafter Kramer warrants this product free from defects in material and workmanship under the following terms HOW LONG IS THE WARRANTY Labor and parts are warranted for three years from the date of the first customer purchase WHO IS PROTECTED Only the first purchase customer may enforce this warranty WHAT IS COVERED AND WHAT IS NOT COVERED Except as below this warranty covers all defects in material or workmanship in this product The following are not covered by the warranty T Any product which is not distributed by Kramer or which is not purchased from an authorized Kramer dealer If you are uncertain as to whether a dealer is authorized please contact Kramer at one of the agents listed in the web site www kramerelectronics com 2 Any product on which the serial number has been defaced modified or removed 3 Damage deterioration or malfunction resulting from i Accident misuse abuse neglect fire water lightning or other acts of nature ii Product modification or failure to follow instructions supplied with the product iii Repair or attempted repair by anyone not authorized by Kramer iv Any shipment of the product claims must be presented to the carrier v Removal or installation of the product vi Any other cause which does not relate to a product defect vii Cartons equipment enclosures cables or accessories used in conjunction with the product WHAT WE WIL2. 50 60 Hz 115 VAC U S A 5 VA power inlet 1 A green OUTPUT LED is positioned below the appropriate LED label 2 Ared INPUT LED is positioned above the appropriate LED label 3 Select both the CONT CONTRAST and the BRIGHT BRIGHTNESS LEDs simultaneously to adjust the horizontal phase of the TBC input against GENLOCK input using the and buttons 4 Select both the COLOR and the HUE LEDs simultaneously to adjust the vertical phase of the TBC input against GENLOCK input using the and buttons 5 For an NTSC input only 6 Reset all the CONTROLS to their default values by simultaneously pressing the and buttons for more than 3 seconds 7 The FC 4000 unit functions as a Standards Converter when no video source is connected to the GENLOCK IN connector KRAMER ELECTRONICS LTD Your Standards Converter TBC Feature Function 9 OUTPUT R Y BNC Connector Component video output 10 OUTPUT CV BNC Connector Composite video output 11 OUTPUT Y C 4p Connector s Video Y C output 12 Term Hi Z Switch Controls loop termination 13 GENLOCK LOOP BNC Connector GENLOCK loop 14 INPUT B Land R RCA Connectors Audio input 15 INPUT B CV BNC Connector Composite video input 16 INPUT B Y C 4p Connector s Video Y C input 4 1 Connecting the Standards Converter TBC To connect the FC 4000 connect the following to the rear panel ports e Aud
3. both composite and Y C s Video are connected as inputs e Has AGC functionality for processing low quality sub standard signals e Is digitally synthesized generating a standard color bar when no video signal is available on the inputs e Includes a digital comb filter for input system decoding e May be used for frame synchronization for example enabling the mixing or processing of video signals e Includes full digital decoding and encoding with highly integrated digital processing To achieve the best performance e Connect only good quality connection cables thus avoiding interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables e Avoid interference from neighboring electrical appliances that may adversely influence signal quality e Position your Kramer FC 4000 in a location free from moisture and away from excessive sunlight and dust Your Standards Converter TBC Figure 1 illustrates the front and rear panels of the FC 4000 Tables 1 and 2 define the front and rear panels of the FC 4000 respectively 1 The video input acts as a TBC and can GENLOCK to the sync of another video therefore synchronizing the 2 asynchronous video sources 2 Labeled INPUT A and INPUT B respectively 3 If Y C s Video is not connected the composite video will take effect 4 Automatic Gain Control 5 As they use the same sync color subcarrier frequ
4. damages whether incidental consequential or otherwise Some countries may not allow limitations on how long an implied warranty lasts and or do not allow the exclusion or limitation of incidental or consequential damages so the above limitations and exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from place to place NOTE All products returned to Kramer for service must have prior approval This may be obtained from your dealer This equipment has been tested to determine compliance with the requirements of EN 50081 Electromagnetic compatibility EMC generic emission standard Part 1 Residential commercial and light industry EN 50082 Electromagnetic compatibility EMC generic immunity standard Part 1 Residential commercial and light industry environment CFR 47 FCC Rules and Regulations Part 15 Radio frequency devices Subpart B Unintentional radiators CAUTION B Servicing the machines can only be done by an authorized Kramer technician Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment B Use the supplied DC power supply to feed power to the machine B Please use recommended interconnection cables to connect the machine to other components 8 KRAMER ELECTRONICS LTD For the latest information on our produ
5. Kramer Electronics Ltd D KRAMER USER MANUAL Model FC 4000 Standards Converter TBC Contents Contents Introduction Getting Started Overview Your Standards Converter TBC 1 Connecting the Standards Converter TBC Operating Your Standards Converter TBC 5 1 1 Converting a Standard 5 1 2 Adjusting the CONTROL Levels 6 Technical Specifications Figures Figure 1 FC 4000 Standards Converter TBC Figure 2 FC 4000 Standards Converter TBC Connections Figure 3 SELECT Button Sequence Tables Table 1 Front Panel FC 4000 Standards Converter TBC Features Table 2 Rear Panel FC 4000 Standards Converter TBC Features Table 3 Technical Specifications of the FC 4000 Standards Converter TBC YADA UN ma a nN gt KRAMER Introduction 1 Introduction Dedication by Kramer Electronics since 1981 to the development and manufacture of high quality video audio equipment makes the Kramer line an integral part of the finest production and presentation facilities in the world In recent years Kramer has redesigned and upgraded most of the line making the best even better The Kramer line of professional video audio electronics is one of the most versatile and complete available and is a true leader in terms of quality workmanship price performance ratio and innovation In addition to our high quality standards converters we also offer excellent switchers and matrices encoders decode
6. L PAY FOR AND WHAT WE WILL NOT PAY FOR We will pay labor and material expenses for covered items We will not pay for the following 1 Removal or installations charges 2 Costs of initial technical adjustments set up including adjustment of user controls or programming These costs are the responsibility of the Kramer dealer from whom the product was purchased 3 Shipping charges HOW YOU CAN GET WARRANTY SERVICE 1 To obtain service on you product you must take or ship it prepaid to any authorized Kramer service center 2 Whenever warranty service is required the original dated invoice or a copy must be presented as proof of warranty coverage and should be included in any shipment of the product Please also include in any mailing a contact name company address and a description of the problem s 3 For the name of the nearest Kramer authorized service center consult your authorized dealer LIMITATION OF IMPLIED WARRANTIES All implied warranties including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option Kramer shall not be liable for 1 Damage to other property caused by defects in this product damages based upon inconvenience loss of use of the product loss of time commercial loss or 2 Any other
7. ard 8 PAL MLED Label Defines the INPUT or OUTPUT PAL M standard 9 PAL NLED Label Defines the INPUT or OUTPUT PAL N standard 10 SECAM LED Label Defines the INPUT or OUTPUT SECAM standard 11 CONT Select the CONT LED via the SELECT button Adjust using the and CONTRAST LED buttons 12 BRIGHT Select the BRIGHT LED via the SELECT button Adjust using the and BRIGHTNESS LED buttons 13 COLOR LED Select the COLOR LED via the SELECT button Adjust using the and buttons 14 HUE LED Select the HUET LED via the SELECT button Adjust using the and buttons 15 SELECT Button Press to select an H PHASE and V PHASE control 16 INPUT A LED Illuminates when selecting INPUT A 17 INPUT BLED Illuminates when selecting INPUT B 18 Input Selector Button Press to select the input source INPUT A or B 19 Button Press to decrease the control level Press the and buttons simultaneously 20 Button Press to increase the control level eelere default value Table 2 Rear Panel FC 4000 Standards Converter TBC Features Feature Function 1 INPUT A Y C 4p Connector s Video Y C input 2 INPUT A CV BNC Connector Composite video input 3 INPUT A Land RRCA Connectors Audio input 4 GENLOCK IN BNC Connector GENLOCK source 5 OUTPUT Y BNC Connector Component video output 6 OUTPUT B Y BNC Connector Component video output 7 OUTPUT Land RRCA Connectors Audio output 8 Power Connector with Fuse 230 VAC
8. cts and a list of Kramer distributors visit our Web site www kramerelectronics com Updates to this user manual may be found at http www kramerelectronics com manuals html We welcome your questions comments and feedback 001 o SA dl Gei Wl IOC We LISTED oe amp Control L T E ae et geg E226674 Kramer Electronics Ltd Web site www kramerelectronics com E mail info kramerel com P N 2900 004011 REV 2
9. encies and the same phase KRAMER ELECTRONICS LTD Your Standards Converter TBC i POWER STANDARD SELECTOR W Y H PHASE p VW emase WW CONTROL INPUT i CONT BRIGHT COLOR HUE A wi gt RN Yo ve NE AC oo OO CH O O gt NTSC 3 58 NTSCAAS mm Il ro ar A e Lamar om E EI 5 0 0 w O Standards Converter TBC A FC 4000 l 230 VAC 50 60 Hz FUSE S SO Figure 1 FC 4000 Standards Converter TBC KRAMER Your Standards Converter TBC Table 1 Front Panel FC 4000 Standards Converter TBC Features Feature Function 1 POWER Switch Illuminated switch supplying power to the unit 2 OUTPUT Button Press to select the output standard illuminating the appropriate LED 3 INPUT Button Press to select the input standard illuminating the appropriate LED 4 AUTO Button Toggles between automatically recognizing the input standard illuminating the appropriate LED and the manual selection mode 5 NTSC 3 58LED Label Defines the INPUT or OUTPUT NTSC 3 58 standard 6 NTSC 4 43 LED Label Defines the INPUT or OUTPUT NTSC 4 43 standard 7 PALLED Label Defines the INPUT or OUTPUT PAL BDGH stand
10. fications Table 3 includes the technical specifications Table 3 Technical Specifications of the FC 4000 Standards Converter TBC Inputs 2 Composite Video 1Vpp 75 ohms on BNCs 2 Y C s Video 1Vpp 75 ohms Y 0 3Vpp 75 ohms C on 4P connectors 2 Audio stereo on RCAs 1Vpp 10K When both Composite and Y C exist on an input the Y C input takes priority Outputs 1 Composite Video 1Vpp 75 ohms on a BNC 1 Y C s Video 1Vpp 75 ohms Y 0 3Vpp 75 ohms C on a 4P connector 1 Audio stereo on RCAs 1Vpp 1K AGC Composite Video and Y input 0 5 Volts to 2 Volts with AGC acting on sync tip Decoder Digital comb filter on input Encoder Digitally synthesized with color bar generator when video input is not detected Input Formats PAL B D G H I M N NTSC 3 58 NTSC 4 43 and SECAM Output Formats PAL B D G H I M N NTSC 3 58 NTSC 4 43 and SECAM Controls Continuous control of contrast brightness color saturation hue NTSC only H and V phase input selector button input output standards selector buttons auto input button Dimensions 19 inch W 7 inch D 1U H rack mountable Power Source 230 VAC 50 60 Hz 115VAC U S A 5 VA max Weight 2 7kg 6 lbs approx Accessories Power cord 1 For example if the BRIGHT LED presently illuminates press the SELECT button 4 times to simultaneously illuminate the COLOR and the HUE LEDs for VERTICAL PHASE KRAMER
11. io and video inputs and outputs e Power cord Figure 2 illustrates how to connect the FC 4000 2 le UL Ss a O o GC Dongan S Video Acceptor CV Video Acceptor Video Generator 75 bar for Genlock EEEE See Figure 2 FC 4000 Standards Converter TBC Connections 1 Push down to terminate the line with 75 Ohm Push up when the line extends to another unit 2 Connect to the GENLOCK IN connector of the next unit in the line 3 Switch OFF the power on each device before connecting it to your FC 4000 After connecting your FC 4000 switch on its power and then switch on the power on each device KRAMER Operating Your Standards Converter TBC 5 Operating Your Standards Converter TBC Section 5 1 1 describes how to convert a Standard and section 5 1 2 describes how to adjust specific Control levels 5 1 1 Converting a Standard To convert a Standard do the following 1 Press the Input Selector button to select either INPUT A or INPUT B The appropriate LED illuminates 2 Press the INPUT button to select the desired input standard The red LED illuminates above the appropriate LED label 3 Press the OUTPUT button to select the desired output standard The green LED illuminates below the appropriate LED label and the selected input standard converts to the selected output s
12. rs and transcoders distribution amplifiers remote controllers processors interfaces and computer related products Congratulations on purchasing your Kramer FC 4000 Standards Converter TBC This product is ideal for the following typical applications e Studio standards conversion e Timebase correction frame store synchronization for production and duplication e Studio color correction The package includes the following items e FC 4000 Standards Converter TBC e Power cord e This user manual e Kramer concise product catalog CD 2 Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment e Review the contents of this user manual 3 Overview The Kramer FC 4000 Standards Converter TBC is a high quality standards converter and Timebase corrector with full proc amp facilities and a KRAMER Your Standards Converter TBC GENLOCK input for frame synchronization In addition the FC 4000 e Converts between all common standards PAL B D G H I M N NTSC 4 43 3 58 and SECAM e Includes 2 sets of video inputs 2 composite and 2 Y C s Video as well as the corresponding audio inputs e Includes 3 different video output formats composite Y C s Video and component video Y R Y B Y as well as an audio output e Is designed so that Y C s Video takes priority over the composite video when
13. tandard 5 1 2 Adjusting the CONTROL Levels Figure 3 illustrates the SELECT button sequence Ch CONT gt BRIGHT gt COLOR gt HUE H PHASE gt V PHASE i Figure 3 SELECT Button Sequence To adjust a specific CONTROL level e Press the SELECT button The appropriate CONT BRIGHT COLOR and or HUE LED illuminates e Press the button or button to increase or decrease the current level To adjust the HORIZONTAL PHASE of the TBC input e Press the SELECT button one or more times according to the SELECT button sequence until both the CONT CONTRAST and the BRIGHT BRIGHTNESS LEDs illuminate and press the button or button to increase or decrease the current phase 1 Item 18 in Figure 1 2 Item 16 or 17 respectively in Figure 1 3 Item 3 in Figure 1 4 Or press the AUTO button to automatically recognize the input standard 5 Item 2 in Figure 1 6 For example if the BRIGHT LED presently illuminates press the SELECT button 3 times to simultaneously illuminate the CONT CONTRAST and the BRIGHT BRIGHTNESS LEDs for HORIZONTAL PHASE 6 KRAMER ELECTRONICS LTD Technical Specifications To adjust the VERTICAL PHASE of the TBC input e Press the SELECT button one or more times according to the SELECT button sequence until both the COLOR and the HUE LEDs illuminate and press the button or button to increase or decrease the current phase 6 Technical Speci
Download Pdf Manuals
Related Search