Untitled - PbNation
Contents
1. D 2 A WARNING VARNING A SA e YOUR ANGEL IS NOT A TOY e Careless or improper use including failure to follow instructions and warnings within this Operator Manual D AR ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES and attached to the ANGEL could cause death or serious injury e Do not remove or deface any warnings attached to the ANGEL ON Switching On Off Navigation Battery Air Supply Macro Line e Paintball industry standard eye face ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 USA or CE standard Europe must be worn by user and any person within range e You must be at least 18 years of age to purchase the ANGEL e Persons under 18 years of age must have adult supervision when using or handling the ANGEL e Observe all local and national laws regulations and guidelines e Use only on professional paintball fields where codes of safety are strictly enforced e Use 0 68 calibre paintballs only e Keep the ANGEL switched off until ready to shoot e Treat every ANGEL as if it is loaded e Never point the ANGEL at anything you do not intend to shoot e Do not shoot at persons at close range e Do not shoot at fragile objects such as windows e Always measure your ANGEL s velocity before playing paintball using a suitable chronograph Bolt Removal Break Beam Eyes Velocity Adjustment Mini Reg Removal Assem2. Diebounce Eve Delay Some options enter submenus To get out of the menus scroll to the Back option and select it FDO Dwell Reset All To exit the menus and return to the home screen scroll to the Exit Menu option in the main menu settings Information When the tournament lock is engaged some functions will appear in grey with a padlock symbol and cannot be selected although their current settings can be viewed To make changes to these settings turn off the tournament lock see next column Turning the Marker off To turn the marker off hold the navigation wheel inwards to enter the menu and then push again to select the first item in the Main Menu Power Off The marker will shut down when this function is selected Tournament Lock A The marker features cox un a tournament lock PO ia function which allows EA G certain settings which i could affect how the marker fires to be disabled This ensures that once a marker has been set up within the rules of a tournament it cannot be modified to increase velocity rate of fire or engage enhanced fire modes without the use of tools Mode locked 10 7 bps To change the setting of the tournament lock first remove the right hand side grip panel to expose the circuit board With the board switched on press the small button on the board below the navigation wheel A Tourney Lock menu will appear on the screen which all
3. OTHER SAFETY IN STRUCTIONS AND GUIDELINES e Always follow instructions warnings and guidelines given with any first stage regulator you use with the Angel FLY Sb e Use compressed air nitrogen gas only DO NOT USE C02 e Only use a paintball regulator that has been designed for air or nitrogen gas e Do not exceed 850 psi 58bar input pressure to the Angel FLY Sb e Take suitable precautions when using sharp cutting instruments e The Macro Line hose must be cut back cleanly and square prior to attachment or re attachment to ensure secure fitment e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE VAN WARN NG READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE AON Using the Electronic Settings Settings and information are available through an easy to use menu tree making use of the full colour screen built into the circuit board To enter the menus press the navigation wheel inwards for a second You will see the screen left Fire Mode settings Once in the menu navigate using the scroll wheel and select options by pushing the wheel inwards If you need to change a setting a long way from its current setting hold navigation wheel in the desired direction for a while and the setting will increase or decrease automatically saving you from repeatedly pushing the wheel up or down Power Off Fire Mode Diebounce Eve Delay
4. a suitable working loader fitted See Loader section Are the connectors plugged in correctly Wiring Connections Is the rate of fire set too high MROF Adjustment Are the Angel Eyes switched on Ensure paint is present Are the rubber finger detents functioning Clean or replace Are the Angel Eyes optics blocked Clean the Angel Eyes Optics Is the paint too fragile for the loader Change paint to tougher grade VELOCITY VARIATIONS Is the eye delay or bolt delay too low Check electronic settings Are good quality paintballs been used Use good paintballs CHOPPING PAINTBALLS Is the barrel bore correct for the paint Use suitable barrel Is the loader battery weak dead Replace batteries Is the paint swollen cold or hot Review your storage of paint Is a suitable working loader fitted Replace loader Is the barrel bore clean Is the tank reg choking on gas supply Clean the barrel Check tank regulator assembly Is the loader dirty Are the paintballs swollen Clean loader Replace the paintballs Is the tank reg operating correctly Check tank regulator assembly Are the Angel Eyes switched on Switching Angel Eyes On Is the mini reg operating correctly Mini Regulator Service Are the Angel Eyes functioning Angel Eyes Test Is the mini reg choking on gas supply Mini Regulator Service Is the correct loader setting sel
5. cleanly and square prior to attachment or re attachment to ensure secure fit e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE Eye Ribbon Removal 1 Remove the eye cover as shown opposite Remove the mini reg and mini reg adaptor Remove the right hand grip cheek by removing the 3 screws using a suitable 2mm Allen wrench Carefully unplug the solenoid from 2 FA AP x P E o K gt gt j f AL lt ww 5 Carefully unplug the eye ribbons from the board AIBBON BEMOVA 7D 6 Remove the two screws retaining the grip frame using a 3mm Allen wrench and remove the grip frame 7 A small rubber grommet is used to help secure the eye ribbons in place along the channel within the main body of the Angel FLY Sb Use a 2mm hex key to lift out the grommet 8 Carefully remove the eye ribbon from the ribbon recess To rebuild reverse this procedure D A HENVOVA LPR Removal If you are experiencing operating pressure inconsistency this may be due to a damaged spool seal on your LPR or a damaged LPR piston 1 Remove the right hand grip cheek by removing the 3 screws using a 2mm hex key provided 2 Carefully unplug the solenoid from the board as shown in Eye Ribbon removal see p 7 3 Carefully unplug the eye ribbons from the board as shown in Eye Ribbon removal see p 5 4 Remove the two screws retaining the grip frame using a 3mm hex key as shown in Eye Ri
6. fine tune the mounting position or to remove the ASA completely The ASA is locked down onto the rail via 2 10 32 unf set screws located within the grip frame 1 Using a 2mm hex key provided remove the 3 screws holding the right hand grip cheek in place 2 Remove the battery see p 3 3 Using the 3 32 hex key provided unscrew the 2 set screws located in the base of the frame counter clockwise until such a point is reached to allow the ASA body to slide freely along the rail Once a new position for the ASA body has been reached tighten the 2 set screws clockwise to lock the ASA firmly into its position Error rectified rectified ball present D Installing an Air Nitro System Each Angel FLY Sb comes with a centrally ported on off ASA allowing for the quick and easy connection of a preset air nitrogen system for immediate use Before installing your preset system into the ASA always ensure that the ON OFF adjuster is wound out approximately half way Be careful not to unscrew the ASA ON OFF adjuster too far as it is possible to completely disassemble the ASA To install your air nitrogen system screw your tank and regulator onto the ASA and tighten Macro Line Hose 1 Pull back the collet on the connector and keep the collet depressed and pull the macro line hose out of the connector firmly Pull back collet Remove 2 Cut the macro line hose cleanly and squarely 3 Push t
7. point at which the trigger stops forwards away from the grip cheek Note It is important not to over adjust the back stop position set screw in this direction as it will result in not enough travel for a trigger pull to activate the micro switch Front stop Counter clockwise moves the point from which the trigger pull starts forwards away from the grip cheek Clockwise moves the point from which the trigger pull starts backwards towards the grip cheek Note It is important not to over adjust the front stop position set screw in this direction as it will result in not enough return travel for the trigger to reset the micro switch Magnet return strength Counter clockwise makes magnet return strength weaker Clockwise makes magnet return strength stronger N v a Note It is important not to over adjust this portion of the trigger as it will negate the position of the front stop set screw For this reason it is advisable that during the setup of the trigger you should wind the magnetic return strength adjuster screw counter clockwise several turns so that it does not interfere with the adjustment of the front stop set screw Activation point Counter clockwise moves the point at which the trigger will activate closer to the end of the trigger pull Clockwise moves the point at which the trigger will activate closer to the start of the trigger pull ADHERE STRICTLY TO THESE A WAR N N G AND ALL
8. repaired or replaced by Angel Sports without any additional charge and shipped to Buyer FOB Angel Sports In lieu of repair or replacement if Angel Sports elects Angel Sports may upon return of such product and making a determination of non conformity or defect keep the product and refund the purchase price paid by Buyer Buyers remedies shall be limited even in the event of Angel Sports default of its Warranty obligations exclusively to those provided in this Warranty UNDER NO CIRCUMSTANCES SHALL Angel Sports OR ANY SUPPLIER DISTRIBUTOR DEALER OR OTHER PERSON BE LIABLE FOR EXEMPLARY PUNITIVE CONSEQUENTIAL OR INCIDENTAL DAMAGES NOR FOR ANY AMOUNT IN EXCESS OF THE BUYER S PURCHASE PRICE Buyer waives any causes of action or theories of liability including but not limited to those arising under contract tort strict liability Product liability statutes or otherwise except as to those specifically provided by the Uniform Commercial Code as adopted in Michigan as excluded modified and limited in this warranty 4 Additional Consumer Protection The products are offered for sale for end use in supervised commercial establishments where professional safety codes are enforced and not NARRAN Y A for personal family or household use Nevertheless if the Product is determined in a transaction to be a customer Product under applicable law the following provisions shall become applicable a THE
9. such as Max ROF so you must also set Max ROF correctly to ensure that the marker is tournament legal Max ROF sets the maximum rate of fire of the marker When the ROF Cap is in effect or the eyes are not in use the marker will never fire faster than this rate Range 8 25 balls per second BPS Adjustable in increments of 0 1 m s Default setting 12m s ROF Cap sets whether the rate of fire is capped according to the Max ROF setting If this is off then the marker will fire as fast as the loader can feed it as long as the eyes are in use When the eyes are disabled the rate of fire will always be limited by the Eye Off ROF setting or Max ROF if set lower Default is ON Start Delay sets the number of shots which must be fired in Semi Automatic mode before ramping may start when using the Ramp preset other modes such as PSP and Millennium are not affected by these settings Range 1 6 shots Adjustable in increments of 1 shot Default setting 3 shots Kick In sets the minimum rate of fire which must be achieved for ramping to start when using the Ramp preset other modes such as PSP and Millennium are not affected by these settings Range 1 12 BPS Adjustable in increments of 1 BPS Default setting 5 BPS Drop Out sets the minimum rate of fire which must be maintained for ramping to continue when using the Ramp preset other modes such as PSP and Millennium are not affected by these settings Range
10. 1 12 BPS Adjustable in increments of 1 BPS Default setting 5 BPS Ramp Reset sets the rate of fire below which ramping will cease and further safety shots will be required to restart ramping when using the Ramp preset other modes such as PSP and Millennium are not affected by these settings Range 1 12 BPS Adjustable in increments of 1 BPS Default setting 1 BPS Max Burst sets the maximum number of shots discharged for each trigger pull when ramping is active when using the Ramp preset other modes such as PSP and Millennium are not affected by these settings Range 2 6 shots per trigger pull Adjustable in increments of 1 shot Default setting 3 shots Dwell sets the length of time the solenoid valve is held open to actuate the firing cycle If set too low shot velocity will be low or inconsistent or the marker may not cycle fully if set too high then air efficiency will suffer Range 0 5m s to 25 m s Adjustable in increments of 0 1 m s Default setting 8 m s Debounce sets the length of time that must pass after the trigger is released before another trigger pull may be registered Increase this value to eliminate unwanted trigger bounce or switch noise which may cause unwanted additional shots to be fired Range 0 5m s to 25 m s Adjustable in increments of 0 1 m s Default setting 5 m s Eye Delay sets the amount of time that a ball must block the eyes before the marker is allowed to fire Increase thi
11. D Tel EU 44 1902 858 007 USA 617 830 1891 Fax EU 44 121 327 3967 USA 617 830 0860 www ANGELSports com The Angel is protected by the following patents USA 6 003 504 6 138 656 6 311 682 6 748 938 6 739 322 6 615 814 D473 910 D484 926 UK 2 345 953 2 342 710 2 379 494 2 384 292 2 352 022 2 391 063 Plus other Patents Pending
12. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS OF THE PRODUCT FORA PARTICULAR PURPOSE THAT CANNOT BE DISCLAIMED ARE LIMITED IN DURATION TO THE INITIAL EXPRESS WARRANTY PERIOD b Some states do not allow limitations on how long an implied Warranty lasts so the above limitation in a may not apply c Some states do not allow the exclusion or limitation of incidental or consequential damages so such limitations may not apply d And this Warranty gives buyer specific legal rights and buyer may also have other rights provided for by law 5 Parts Service and Training performed by Angel Sports All Warranty and non Warranty parts labour and service if any provided by Angel Sports related to the product are subject to all limitations and disclaimers of warranties and remedies provided in this Warranty The replacement or repair of a product by Angel Sports does not give rise to any new Warranty except the Warranty period provided for herein shall be extended by the length of any period in which defective or non conforming product is in possession of Angel Sports Angel Sports may have access to the Product after purchase of the Product Angel Sports is not under any duty to inspect the product for any defects or any improper use or modification of the Product nor to correct or advise anyone of any such condition use or modification which is observed Any notification which may be given is voluntary and subje
13. OFF the LED on the rear of the grip frame shows red the rate of fire is limited and the eyes are not used to control the firing cycle or to prevent the Angel FLY Sb from firing To turn the eyes back on again push and hold the navigation wheel up again and hold until the eye status icon changes back to normal If the eyes fail for instance if they become blocked by broken paint they will automatically be disabled and the Angel FLY Sb will be limited to a reduced rate of fire to prevent any further breakages If the blockage clears itself the eyes will automatically be re enabled although a warning symbol will continue to be displayed in the eye status icon to alert you to a possible problem This warning will not affect the operation of the Angel FLY Sb it can be cleared by turning the eyes off and back on again The eye status icon updates continuously The meaning of each symbol is shown below Breech Ball Eyes Error Error empty present OFF Propellant Air Nitro Supply The Angel FLY Sb is designed to operate on air nitrogen gas This needs to be supplied to the Angel FLY Sb using a suitable first stage regulator The ideal input pressure is 450psi but it will function with inlet pressures up to 850psi Adjusting or Removing the ASA from its Mounting Rail The ASA connects to the grip frame of the Angel FLY Sb via an integrated dovetail mounting rail that allows the user to slide the ASA body along the rail to
14. ORE ATTEMPTING ANY WORK ON YOUR ANGEL SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE a ANGEL Angel Sports 3 Charter Court Broadlands Wolverhampton England WV10 6TD o www ANGELSports com Don t Forget to send your warranty card back to Angel Sports 1 General Express Warranties Angel Sports warrants to the buyer who is purchasing to place into use Buyer only that the ANGEL Product shall be free from material manufacturing defects in materials and workmanship for six months from the date of purchase subject to the requirements disclaimers and limitations of this Warranty This is not a Warranty of performance but a limited Warranty as to the condition of the Product at the beginning of the Warranty period this Warranty is only against such defects and not against any other failures such as but not limited to those due to wear and tear exposure to the elements unusual operating environments misuse negligence accident alteration or repair in any respect which in the judgement of Angel Sports adversely affects the condition or operation of the Product Normal maintenance and perishable items such as seals batteries wiring indicator lamps and exhaust valves are excluded from this limited Warranty against defects This Warranty is not transferable and it may not be waived or expanded except in writing signed by Angel Sports The terms and limitations of this Warranty shall
15. ace using a connecting pin that runs up through the ram hammer and into the bolt 1 To remove the bolt pull the connector pin downwards to its locked position so that the bolt will become free of the pin To enable you to pull the pin you will need to use either the LPR or bolt removal tool or the supplied bolt pin removal knob 2 Flick the Angel FLY Sb forwards and downwards whilst holding your free hand over the front of the Angel FLY Sb to catch the bolt when it slides forwards within its chamber When your Angel FLY Sb is new the bolt may be slightly more stubborn to remove This will become easier over time VIO VA 3 The bolt should now be free of the ADB fingers and can now be removed from the body of the Angel FLY Sb 4 To re insert the bolt back into the Angel FLY Sb first line up the bolt correctly The grooves on the rear section of the bolt should align with the Anti Double ball fingers on the inside of the Angel FLY Sb z ze g 5 Push the bolt backwards into the marker until it reaches its stop 6 Push the connector pin back up to connect the bolt and ram back together x NOTE The Angel FLY Sb is supplied with a connector pin extractor knob The Angel FLY Sb can be operated with or without the knob in place depending on player preference YAD VEN 5 D NOTE There is no need to pull the pin all the way out If however you do pull the pin out completely to re insert the pin Ho
16. also apply to any additional goods or information which may be distributed by Angel Sports relating to the ANGEL 2 Disclaimer and Limitation of Express and Implied Warranties There are no express Warranties other than those contained in this Warranty Whether or not the Product is to be used exclusively by the Buyer there shall be no third party beneficiaries to this Warranty herein NO WARRANTY IS PROVIDED TO DISTRIBUTORS OR DEALERS EXCEPT AS MAY BE EXPRESSLY PROVIDED IN A SEPARATE AGREEMENT OF SALE All descriptions illustrations of the Product and other information in catalogues brochures and price lists or otherwise provided by Angel Sports or others are intended for general information only Angel Sports is not responsible for any errors or omissions therein or for any loss or damage resulting from reliance on them Angel Sports does not warrant that the Product is in compliance with any law or industry standards guidelines or procedures Angel Sports standard terms and conditions of sale also apply if Buyer is a direct purchaser from Angel Sports Angel Sports DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THOSE OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY 3 Remedy and Limitation of Angel Sports liability Defective or non conforming Product or parts thereof discovered and returned to Angel Sports freight prepaid with proof of purchase during the Warranty period shall be
17. bbon removal see p 7 5 Remove the back plate using the 3mm hex key provided m 6 Remove the screw retaining the sight rail using the 2 5mm hex key provided and slide off 7 Remove the LPR chamber plug using the 4mm hex key provided 8 Carefully lift and remove the solenoid carefully extracting the solenoid plug from the body noting the correct orientation of the solenoid gasket 9 Extract the LPR retaining pin 10 Remove the LPR piston using the extraction tool provided NOTE THE LPR PISTON SPRING STACK ORDER 11 Using a blunt pick or ball end hex key remove the solenoid wire spacer and the LPR body Note Check the LPR spool and piston for signs of wear and damage and replace if necessary VAN WARN NG READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE A WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES e Always follow instructions warnings and guidelines given with any first stage regulator you use with the Angel FLY Sb e Use compressed air nitrogen gas only DO NOT USE C02 e Only use a paintball regulator that has been designed for air or nitrogen gas e Do not exceed 850 psi 58bar input pressure to the Angel FLY Sb e Take suitable precautions when using sharp cutting instruments e The Macro Line hose must be cut back cleanly and square prior to attachment or re attachment
18. bly Adb Replacement Eye Ribbon Removal Lor Removal Exhaust Valve Stem e Never shoot at velocities in excess of 300 feet 92 meters per second or at velocities greater than local or national laws allow e Use compressed air nitrogen gas only Do not use CO2 e Always follow instructions warnings and guidelines given with any first stage regulator you use with the ANGEL Ram Removal e Never look into the barrel or breech area of the ANGEL whilst the ANGEL is switched on and able to fire e Never put your finger or any foreign objects into the breech or paintball feed tube of the ANGEL e Never allow pressurised gas to come into contact with any part of your body e Always switch off the ANGEL when not in use e Always fit a barrel blocking device to your ANGEL when not in use on the field of play e Always remove all paintballs from the ANGEL when not in use on the field of play e Always remove the first stage regulator and relieve all residual gas pressure from the ANGEL before disassembly Trigger Adjustment Electronic Settings Warranty Excluding usa canada e The ANGEL can hold a small residual charge of gas typically 2 shots with the first stage regulator removed Always discharge the ANGEL in a safe direction to relieve this residual gas pressure e Always remove first stage regulator and all residual gas pressure from the ANGEL for transport and storage e Always follow warnings and guidelines given with
19. cover arms as shown below e a 1 oJ A Y a Also note that it is important not to splay the eye cover arms too far apart This may result in damage to the eye cover Mini reg cartridge assembly Note spring stack order VAN WARN l NG READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE A WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES e Ensure a barrel blocking device is fitted to the Angel FLY Sb e Ensure the hopper is removed from the Angel FLY Sb e Ensure that there are no paintballs in the Angel FLY Sb e Ensure the Angel FLY Sb is switched off via the navigation button on the rear of the grip frame prior to fitting your first stage regulator e Paintball industry standard eye face ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 USA or CE standard Europe must be worn by user and any person within range e Always follow instructions warnings and guidelines given with any first stage regulator you use with the Angel FLY Sb e Use compressed air nitrogen gas only DO NOT USE C02 e Only use a paintball regulator that has been designed for air or nitrogen gas e Do not exceed 850 psi 58 bar input pressure to the Angel FLY Sb e Take suitable precautions when using sharp cutting instruments e The Macro Line hose must be cut back
20. ct to all limitations and disclaimers in this Warranty ANADA BD 6 User s Responsibility for Safety and Indemnification It is Buyer s or other user s responsibility to obtain all training and means that may be necessary to effectively protect all individuals and property from damage and bodily injury which otherwise may result from the use or maintenance of the Product and to use the Product in accordance with operating instructions and due care If operating instructions are not provided with the Product or have been lost a copy will be provided by Angel Sports without cost on request The buyer shall use and shall require all others to use all safety devices and guards furnished with or intended to be used with the Product and to follow proper safe operating procedures in accordance with general industry standards and as set forth in manuals and instruction information furnished by Angel Sports If the Buyer fails to comply with the obligations set forth in this section the Buyer shall defend and indemnify Angel Sports harmless from any claim liability or obligation incurred by Angel Sports or its suppliers distributors or dealers to persons injured directly or indirectly in connection with the use of the product contrary to this Warranty or any warning or instruction from Angel Sports 7 Law and Jurisdiction This Warranty shall be governed by the laws of Michigan and Buyer irrevocably submits to the non e
21. e Ensure a barrel blocking device is fitted to the Angel FLY Sb e Ensure the hopper is removed from the Angel FLY Sb e Ensure that there are no paintballs in the Angel FLY Sb e Paintball industry standard eye face ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1776 USA or CE standard Europe must be worn by user and any person within range e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE Switching your Angel FLY Sb ON the navigation button inwards The Angel FLY Sb will turn on and will automatically go into live mode with the eyes on The OLED display screen will illuminate and show the firing mode and basic status of the Angel FLY Sb see below The LED on the rear of the grip frame will illuminate blue gt LPR Bolt removal tool Mini Reg End plug pin removal tool Supplied tools A FING ON O Turning the Angel FLY Sb OFF e gt To turn the Angel FLY Sb OFF hold the navigation wheel inwards to enter the menu and then push again to select the first item in the main menu power off The marker will shut down when the function is selected Navigation Button The navigation button is located on the rear of the grip frame and allows access to the electronic settings and features used on the Angel FLY Sb Push the button inwards and hold for two seconds To navigate through the options simply push the navigation butto
22. ected Change Loader Type settings Are unsuitable after market parts fitted Use genuine ANGEL parts Is the Rate Of Fire set too high MROF Adjustment Is the bolt worn Replace Soft Bolt Are the rubber finger detents functioning Clean or replace Is the LPR set correctly LPR Adjustment Is the eye delay or bolt delay too low Check electronic settings Is the valve dwell set correctly Dwell Adjustment FIRING TOO SLOW Is first shot low Increase Dwell Time Is the rate of fire set correctly MROF Adjustment VELOCITY TOO LOW HIGH Is the high pressure reg set correctly Check at gas source Is the loader battery weak dead Is a suitable working loader fitted Replace batteries Replace loader Is velocity adjuster screw set correctly Velocity adjustment Is the loader dirty Clean loader Is the bolt sticking Check rubber finger detents Are the Angel Eyes switched on Switching Angel Eyes On Is the LPR set correctly LPR Adjustment Is the correct loader setting selected Change Loader Type settings Is the valve dwell set correctly Dwell Adjustment Is the Rate Of Fire set too low MROF Adjustment GAS LEAKING Is the eye delay or bolt delay too high Check electronic settings From the back cover Check solenoid valve Is the eye sensitivity too low Check electronic settings From the Ram assembl
23. he end plug retention pin using the extraction tool provided 6 Remove the end plug being careful to move eyes out of the way to avoid damage 7 Remove the grip frame as shown on p7 8 Remove the Exhaust valve retaining pin and blanking plug Blanking TB VL DAVI D 9 Using a blunt pick carefully extract the exhaust valve guide as shown a Important notes for the re assembly of components e Ensure exhaust valve stem assembly is located in the exhaust body within the Angel FLY Sb e Ensure that the end cap is located correctly RAM Removal You may need to remove your ram if the Angel FLY Sb s hammer has come loose or if the ram is leaking 1 Remove the right hand grip cheek by removing the 3 screws using the 2mm hex key provided Carefully unplug the solenoid and the eye ribbons from the board and remove the grip frame and fore grip as shown on page 7 Remove the bolt connecting pin 5 Using the 4mm hex key push the ram backwards Sa AL VIEN Trigger adjustment The trigger system has four adjustable points back stop front stop magnetic return strength control and activation point When adjusting the trigger it is advisable to set both the front and back stop positions before you proceed to set the return strength or activation point Back stop Counter clockwise moves the point at which the trigger stops backwards towards the grip cheek Clockwise moves the
24. he hose firmly into the macro line connector to re attach READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE A WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES e Always follow instructions warnings and guidelines given with any first stage regulator you use with the ANGEL Sb e Use compressed air nitrogen gas only DO NOT USE C02 e Only use a paintball regulator that has been designed for air or nitrogen gas e Do not exceed 850 psi 68bar input pressure to the ANGEL Sb e Take suitable precautions when using sharp cutting instruments e The Macro Line hose must be cut back cleanly and square prior to attachment or re attachment to ensure secure fitment e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE ASA adjuster in OFF position Air will not flow ASA adjuster in ON position Air will flow A WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES e Ensure a barrel blocking device is fitted to the Angel FLY Sb e Ensure the hopper is removed from the Angel FLY Sb e Ensure that there are no paintballs in the Angel FLY Sb e Ensure the Angel FLY Sb is switched off via the navigation button on the rear of the grip frame prior to fitting your first stage regulator e Paintball industry standard eye face ear and head protection designed specifically to stop
25. ld the threaded end push the blank end in to the corresponding hole in the hammer the two recesses on the pin should be facing the rear of the body When the first recess locates you will feel it click in place replace the bolt see points 4 6 above Velocity Adjustment Using a 1 8th hex key provided turn the velocity adjuster either e clockwise in to decrease the velocity e counter clockwise out to increase velocity Decrease Increase Ds _MINIBEG REMOVA Mini Reg Removal and Assembly The mini regulator is a second stage regulator that is used to control the velocity and regulate the gas pressure It can be deleted but only if a suitable first stage regulator is used that incorporates a high flow and good regulation properties across the tank pressure range Please ensure that the macro line is removed from the fore grip before disassembley 1 Remove the velocity adjuster screw located on the fore grip using a 1 8 Allen wrench EE Unscrew the mini reg 3 Remove the fore grip cap using a suitable wrench Using the extraction tool provided remove the mini reg cartridge Note If replacement of the macro line hose connector is required remove the regulator end cap from the fore grip before attempting to replace the fitting Failure to do so can result in damage to the regulator end cap or the fore grip VDL AVD E Rubber Finger Detent Replacement The Angel FLY Sb incor
26. n upwards or downwards to scroll through the features and settings Push the button inwards to select a function or feature or to save the desired setting 1A LION DA Battery Replacement 1 Remove the right hand grip cheek by removing the 3 screws using the 2mm hex key provided En 2 Push the battery upwards at the same time lifting the battery out of its cavity F ME jj ktm 4 Important Observe the battery polarity Always use a good quality fresh battery TE F Fo aa a PP As A VAN WARN l NG READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE A WARNING SHLAN DEAN Switching OFF the Angel Fly Sb Break Beam Eyes The Marker is equipped with a break beam eye system which prevents paint breakage by allowing the marker to fire only when a ball is fully seated in the breach and ready to fire When the marker is turned on the eyes are active by default and the marker will be prevented from firing unless a ball is present in the breach ready to fire It is recommended that the marker be operated with the eyes on at all times unless there is a problem preventing them from working such as broken paint blocking the sensors If you do need to turn the eyes off push the navigation wheel upwards while in the home screen until the eye status indicator changes to show that the eyes are disabled When the eyes are
27. nfair Terms in Consumer Contracts Regulations SI 1994 3159 the statutory rights of the purchaser are not affected by these conditions Carriage charges in relation to warranty claims shall be borne by the customer Where any valid claim in respect of the ANGEL is based in the quality or condition of the ANGEL or its failure to meet specification and such valid claim is notified to the company in writing and is in accordance with the company s standard terms and conditions of sale the company shall be entitled to repair or replace the goods or the part in question free of charge or at the company s sole discretion refund to the purchaser the price of the goods or a proportionate part of the price but the company shall have no further liability to the purchaser Except in respect of death or personal injury caused by the company s negligence the company shall not be liable to the purchaser by reason of any representation or any implied warranty condition or other term or any duty at common law or under the express terms of this guarantee for any direct or indirect special or consequential loss or damage whether to persons or property costs expenses or other claims for compensation or damages whatsoever whether caused by the negligence of the company its employees or agents or otherwise which arise out of or in connection with the supply of the ANGEL its use or misuse or resale by the purchaser or any individ
28. ows you to turn the lock on or off Choose and confirm your selection with the navigation wheel FUNCTION DESCRIPTIONS Note depending on the software version running on your marker some options may be different See the documentation accompanying the software release for further information Power Off switches off the marker to prevent unwanted firing and stop the battery from being drained Fire Mode enters the menu containing settings affecting how the marker fires This includes fire preset displayed in the menu item when highlighted as well as maximum rate of fire and custom ramping parameters This menu groups together the settings which may need to be changed for particular field or tournament rules Fire Mode settings Modes available Custom Auto Demo Semi Default Mode Millennium PSP Settings enters the menu containing basic marker settings including Dwell and Debounce parameters and other preferences These are settings which should not need changing once the marker is correctly set up Info provides some information about the software and hardware versions of the electronics and some status information which can be useful when diagnosing problems Exit Menu leaves the menu system and returns to the home screen Each submenu also has a Back option which returns to the previous menu Preset sets the fire mode used Note that selecting a preset does not affect other settings
29. paintballs and meeting ASTM standard F1776 USA or CE standard Europe must be worn by user and any person within range e Always follow instructions warnings and guidelines given with any first stage regulator you use with the Angel FLY Sb e Use compressed air nitrogen gas only DO NOT USE C02 e Only use a paintball regulator that has been designed for air or nitrogen gas e Do not exceed 850 psi 58 bar input pressure to the Angel FLY Sb e Take suitable precautions when using sharp cutting instruments e The Macro Line hose must be cut back cleanly and square prior to attachment or re attachment to ensure secure fit e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE Bolt Removal The Angel FLY Sb s bolt includes two small gas ports that direct a small proportion of air onto the lenses of the Angel FLY Sb s eye sensors which negates the need to clean them as regularly as other markers If you experience a serious breakage in the breach during a game your Angel FLY Sb the eyes will switch off and in most instances you will be able to continue firing and the gas blasts from the ports in the bolt will automatically clean the eyes they will then turn back on automatically NOTE It is important to keep the bolt clean and free from dirt or grit and that the bolt is kept dry and free from any lubrication We recommend that the bolt is wiped clean at the end of every days usage The bolt is held in pl
30. porates the new three piece eye cover strap This eye cover strap incorporates the improved ADB fingers and is designed for ease of replacement of the ADBs and trouble free cleaning of the ANGEL eyes if required 1 Remove the volume chamber maintenance plug with a 4mm Allen wrench 2 Slide the front section of the eye cover forward and remove 3 Carefully remove the eye cover arms from either side of the Angel FLY Sb A WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES e Always follow instructions warnings and guidelines given with any first stage regulator you use with the Angel FLY Sb e Use compressed air nitrogen gas only DO NOT USE C02 e Only use a paintball regulator that has been designed for air or nitrogen gas e Do not exceed 850 psi 58bar input pressure to the Angel FLY Sb e Take suitable precautions when using sharp cutting instruments e The Macro Line hose must be cut back cleanly and square prior to attachment 4 Using a 2mm Allen wrench or similar push out the ADB finger to be replaced 5 Take a new ADB finger and insert the grommet into the retaining hole of the eye cover arm Repeat this process for the other side or re attachment to ensure secure fitment To reassemo IE i SHOULD YOU BE UNSURE AT ANY STAGE procedu YOU MUST SEEK EXPERT ADVICE Note It is important that the front section of the eye cover is located correctly on the eye
31. rrected NOTE FSDO correction may increase the velocity of the first shot over the limits set by the field or tournament so use this option with care and only if necessary Range O to 300 secs Adjustable in increments of 10 secs Default setting disabled FSDO Dwell sets how much time is added to the dwell of the first shot after the idle period above If the FSDO Time is set to Disabled this option will have no effect NOTE FSDO correction may increase the velocity of the first shot over the limits set by the field or tournament so use this option with care and only if necessary Range 0 1m s to 5m s Adjustable in increments of 0 1 m s Default setting 1 m s NARBANIY EX Subject to the conditions set out below Angel Sports warrants that the ANGEL will correspond to its specification at the time of delivery and will be free from defects in materials and workmanship for a period of six months from the date of purchase Angel Sports gives this warranty subject to the following conditions e Proof of purchase is required in all warranty claims e Warranty is not transferable The company shall be under no liability in respect of any defect arising from fair wear and tear e Seals batteries wiring circuit boards displays and exhaust valves are not covered by this warranty Wilful damage negligence abnormal working conditions weather accident tampering failure to follow manufacturers instr
32. s setting when using a gravity fed loader and paint breakage is a problem Range 0 5m s to 25 m s Adjustable in increments of 0 1 m s Default setting 3 m s BON NG S Eye Sensitivity sets the sensitivity of the eye sensor higher means more sensitive Adjust this if the eyes are dirty and not reliably detecting balls or if ambient light is interfering with the operation of the eyes Range 1 20 Adjustable in increments of 1 Default setting 10 Bolt Delay sets the length of time that the bolt is ignored for as it travels past the eyes to help clearly distinguish between the bolt and a ball bouncing in the breech Range 0 5m s to 25 m s Adjustable in increments of 0 1 m s Default setting 8 m s Clearing Shot sets whether holding the trigger for a second will cause the marker to fire even if a ball is not detected This is useful to kick start sound activated loaders If a ball is detected and fired before the one second delay no additional clearing shot will be fired Default is ON FSDO Time allows an option to increase the dwell on the first shot after an idle period This can be useful particularly in very cold conditions or if the marker s internals are in need of servicing and the first shot after an idle period is at a lower velocity First Shot Drop Off If reduced to zero this option is disabled otherwise the setting determines how long must pass without a shot before the next shot is co
33. to ensure secure fitment e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE A WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES e Ensure a barrel blocking device is fitted to the Angel FLY Sb e Ensure the hopper is removed from the Angel FLY Sb e Ensure that there are no paintballs in the Angel FLY Sb e Ensure the Angel FLY Sb is switched off via the navigation button on the rear of the grip frame prior to fitting your first stage regulator e Paintball industry standard eye face ear and head protection designed specifically to stop paintballs and meeting ASTM standard F1 776 USA or CE standard Europe must be worn by user and any person within range e Always follow instructions warnings and guidelines given with any first stage regulator you use with the Angel FLY Sb e Use compressed air nitrogen gas only DO NOT USE C02 e Only use a paintball regulator that has been designed for air or nitrogen gas e Do not exceed 850 psi 58 bar input pressure to the Angel FLY Sb e Take suitable precautions when using sharp cutting instruments e The Macro Line hose must be cut back cleanly and square prior to attachment or re attachment to ensure secure fit e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE Exhaust valve stem removal If you are experiencing gas leaking from the breech area first ensure your tank is delivering at least 200 psi to
34. ual and the entire liability of the company under or in connection with the purchase or use or misuse of the ANGEL shall not exceed the purchase price of the ANGEL Purchaser agrees to adhere strictly to all warnings and safety procedures and the contents of the Operator s Manual The laws of England shall govern this warranty and the purchaser agrees to submit to the non exclusive jurisdiction of the English courts The supply and purchase of the ANGEL is subject to the company s standard terms and conditions of sale a copy of which is available on request ANGEL patents applied for design rights and all rights reserved The ANGEL is marketed and distributed by Angel Sports Ltd Company registered in England No 2114341 and Angel Sports Paintball Inc registered in USA No 2479769 No warranty is given to parts not manufactured by the manufacturer and all liability for loss damage or injury is excluded This warranty must be construed and read in conjunction with the product s terms and conditions of sale To make a warranty claim the purchaser must first contact the nearest authorised ANGEL Service Centre for instructions A list of authorised ANGEL Service Centres may be obtained through the Angel Sports website www AngelSports com or by contacting Angel Sports by mail at Angel Sports 3 Charter Court Broadlands Wolverhampton WV10 6TD England Tel 44 0 1902 858 007 A WARN NG READ ALL WARNINGS BEF
35. uctions whether oral or in writing misuse or alteration or repair ofthe ANGEL without the company s written approval will invalidate this warranty and the company shall be under no obligation whatsoever to the purchaser in respect of any of the above breaches of this warranty The above warranty does not extend to parts materials or equipment not manufactured by the company in respect of which the purchaser shall only be entitled to the benefit of any such warranty or guarantee as given by the manufacturer to the company This warranty does not cover the following e Repairs alterations or replacements not authorised by the manufacturer e The gradual reduction in performance linked to the age of the ANGEL or usage e Anything caused directly or indirectly by vandalism or theft DING ANADA e Any damage to parts which are recalled by the Manufacturer e Any loss damage or failure which a qualified engineer appointed by the manufacturer believes could have been avoided or was totally or partly caused by a lack of maintenance Subject as expressly provided in these conditions and except where the goods are sold to a person dealing as a consumer within the meaning of the Unfair Contract Terms Act 1977 all warranties conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law Where the goods are sold under a consumer transaction as defined by the U
36. xclusive jurisdiction of courts sitting in Michigan to resolve all disputes arising from or related to this warranty or use of the Product 8 Claims and information procedure To make a warranty claim the Buyer must first contact the nearest authorised ANGEL Service Centre for instructions A list of authorised ANGEL Service Centres may be obtained through the Angel Sports website www AngelSports com or by contacting Angel Sports by mail at Angel Sports 3 Charter Court Broadlands Wolverhampton WV10 6TD England Tel 44 0 1902 858 007 14 A NDING ANGEL WILL NOT FIRE BREAKING PAINTBALLS Possible reason Check Possible reason Check No air or nitrogen present Propellant Air Nitrogen Supply Is the paint too fragile Use less fragile paint Is the battery operational Change the battery Is the barrel bore correct for the paint Use suitable barrel Is the trigger not closing the switch Trigger Adjustment Is the paint swollen cold hot Review your storage of paint Is the trigger not releasing the switch Trigger Adjustment Are the Angel Eyes switched on Switching Angel Eyes On Is the bolt jammed forward Clear the blockage from breech Are the Angel Eyes functioning Angel Eyes Test Is the LPR set correctly LPR Adjustment Is the loader battery weak dead Replace batteries Is the Trigger functioning Trigger Adjustment Is
37. y Check ram body O rings EXCESSIVE NOISE GAS CONSUMPTION From the gas joints Check all fittings Is the valve Dwell set correctly Dwell Adjustment A WARNING From barrell Do the ram and bolt move forward when gas is supplied Exhaust valve stem guide Push bolt Ram backwards usin the external bolt connector pin Is the LPR pressure set correctly Is the exhaust valve worn LPR Adjustment Exhaust Valve replacement Is the barrel bore correct for the paint READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE Use suitable barrel A WARNING The Angel FLY Sb is not a toy Careless or improper use including failure to follow the instructions in the operator s manual could cause death or serious injury Paintball industry standard eye face ear protection must be worn by the user and any persons within range Do not shoot at persons at close range Persons must be at least 18 years of age to purchase Persons under 18 years of age must only use under adult supervision Observe all local laws regulations and guidelines Use only on professional paintball fields where codes of safety are strictly enforced Do not use co2 Use 68 Calibre paintballs only Read operator s manual before use and comply with all safety instructions and guidelines ANGEL Sports 3 Charter Court Broadlands Wolverhampton England WV10 6T
38. your Angel FLY Sb If you are still experiencing operating pressure related problems with your Angel FLY Sb such as inability to achieve the required velocity or increased noise when shooting your Angel FLY Sb may have a damaged exhaust stem face seal This seal can be easily accessed by removing the exhaust valve stem assembly following the instructions in points 1 and 2 below Once removed inspect the face seal If the face of this seal is scored or impregnated with grit or dirt or is excessively deformed it is necessary to replace the exhaust valve stem assembly by reversing the procedure in points 1 and 2 below 1 Remove the volume chamber maintenance plug using a 4mm Allen wrench 2 Insert a suitable Allen wrench into the cavity The exhaust valve stem which is magnetic will be attracted to the Allen wrench and can be easily removed AOS ACA A Exhaust valve guide removal Once the valve stem assembly has been replaced if you are still experiencing the same problem you will need to inspect the O ring on the exhaust valve guide nearest the face seal for nicks or tears and replace if necessary If there are no signs of damage to this O ring inspect the face seal seat for dents or scratches and replace if necessary following the instructions in Exhaust valve Stem Removal and points 3 to 9 below 3 Slide off the eye cover see p6 4 Remove the fore grip mini reg as shown on p 7 5 Remove t
39. your first stage regulator for safe transport and storage e Always store the ANGEL in a secure place e THIS OPERATOR S MANUAL MUST ALWAYS ACCOMPANY THE PRODUCT IN THE EVENT OF RESALE OR NEW OWNERSHIP e SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE A SS LA ENGLAND A AN 4 E e This Operator s and User s Manual is in English e t contains important safety guidelines and Instructions e Should you be unsure at any stage or unable to understand the contents within this manual you must seek expert advice e Le mode d emploi est en Anglais e contient des instructions et mesures de s curit importantes e En cas de doute ou s il vous est impossible de comprendre le contenu du monde d emploi demandez conseil a un expert e Este manual de operarios y usarios esta en Ingl s e Contiene importantes normas de seguridad e instrucciones e Si no esta seguro de alg n punto o no entiende los contenidos de este manual debe conultar con un experto Fault Finding Warranty usa canada e Diese Bedienungs und Benutzeranleitung ist in Englisch e Sie enthalt wichtige herheitsrichtlinien und bestimmungen e Sollten Sie sich in irgendeiner Weise unsicher sein oder den Inhalt dieses Heftes nicht verstehen lassen Sie siche bitte von einem Experten beraten A WARNING ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES e Angel FLY Sb is LIVE and capable of firing
Download Pdf Manuals
Related Search