Home

Instruction

1. APPLICATION The Suspension Trauma Safety Strap when used in conjunction with IMPORTANT Training must be conducted without exposing the user to a fall or a full body harness is meant to prolong the allowable suspension time for a suspension trauma hazard person who has experienced a fall from a height It may only be used in a INSPECTION During harness inspections check the suspension strap situation where a fall has occurred or for training assembly Check the cover for damage and the connection to harness for WARNING Maintain an upright position following suspension Do not lay wear Inspect webbing and cover material must be free of frayed cut or down Seek medical attention following a suspension broken fibers Look for tears abrasions burns discoloration or knots Verify RESCUE This product is not a replacement for a rescue plan The employer that one cover is marked hook and the other loop If inspection reveals a must have a post fall rescue plan and the means available to implement the plan defective condition remove the unit from service immediately and destroy it TRAINING It is the responsibility of the purchaser and user of this equipment to WARNING This product is part of a personal fall arrest system The user must assure that they are trained in the correct care and use of this equipment They must follow manufacturer s instructions for each component of the system These also be aware of the operating characteristics a
2. pplication limits and consequences of instructions must be provided to the user of this equipment Manufacturer s improper use of this equipment instructions must be followed Alterations or misuse of this product or failure to follow instructions may result in serious injury or death LOCATION The suspension straps should be installed where the shoulder strap and the leg strap intersect omy me j Shoulder ey Strap INSTALLATION INSTALLATION Slip the case strap through the Pass the case through the case Wrap the tabs around one of the harness loop that contains the strap and choke it down on the harness straps and connect the leg strap harness loop the snaps to hold the case in place Raise the ends of the straps to locate the hook and loops Insert the hook into an appropriate loop and lower the strap USE Step onto the strap to alleviate the pressure of the leg straps on the legs Adjust the hook loop combination to obtain the most comfortable strap length WARNING Do not disconnect harness buckles Locate and open each case and deploy the suspension straps 3965 Pepin Ave 800 328 6146 Made in China ba a ee UEU A Pending 2004 DB Industries Inc 5902486 Rev B

Instruction

Contents

Download Pdf Manuals

Related Search

Related Contents