M160 Transparent Female Catheter Model M160
Contents
1. it might be deformed or altered SAKAMOTO MODEL CORPORATION Head office 34 Higashitakagicho Shimogamo Sakyo ku KYOTO 606 0865 JAPAN Phone 81 75 701 1135 Fax 81 75 722 5638 E mail info sakamoto model com URL http sakamoto model co jp Overseas Sales Department 9 29 Senbahigashi Minoh City Osaka 562 0035 JAPAN Phone 81 72 729 8350 Fax 81 72 729 8385 E mail trade sakamoto model com2. M1 60 Transparent Female Catheter Model S M1 60 1 Transparent Male Catheter Model SAKAMOTO MODEL CORPORATION User s Manual 151023 INDEX introduction Table of Contents Purpose Content Precautions Concerning handl ing Usage Storage method o A O N Please open your parcel and check the main unit and accessories of the product immediately upon receipt If the products are delivered damaged or with parts missing please contact our company or the distributor AARTI WASE TIL Introduction Thank you for purchasing our product Transparent Female Male Catheter Model Read this user s manual carefully in order to use the product for a long time appropriately This product is closely checked before factory shipment However when this product arrives open it soon and check if anything on the main unit and accessories are missing or broken Table of contents Introduction Table of Contents ccceceeeeeeeeees 1 Purpose Content rient unr EE ean 2 Precautions concerning hand ling cceeeeeeeeeees 3 WGA Ci ciiaica cia cass r a S 4 Storace MENOU keina E TAN 5 Purpose Training can be performed for the following items 1 Intermittent urethral catheterization 2 Continuous urethral catheterization 3 Genital wash 4 Confirmation of indwelling balloons Content 1 Main unit external genitalia 1 piece 2 Irrigator 1 bottle 3 Irriga
3. ction might be broken or fogged if hit against anything or rubbed with a strong force When performing training wipe off water in the catheter and be sure to apply the accessory dedicated silicon oil before inserting it Use the attached dedicated silicon oil only as a lubricant oil Using some other chemicals might cause a failure If anything strange is detected when this model is being used stop using it and notify us as soon as possible This product is a simulator for users to perform advanced training Nonetheless it does not guarantee that a similar effect can be obtained by actual treatment 10 Note in advance that this product is subject to change without notice to improve it 3 Usage Bladder catheterization 1 Remove the catheter model from its case and place it on a table with a non slick surface 2 Connect the tube marked red of the main unit to the irrigator Refer to the right picture 3 Set the irrigator over the irrigator stand Set it facing prominence and depression each other 4 Hang the tube of no mark on the side of the irrigator Refer to the picture 5 Pour the 500cc water into irrigator and open the clamp and fill up the bladder with water Be careful the additional water in irrigator If you add over th 300cc of irrigator it might cause a water leak 6 Before insertion apply the special lubricant to the end of the Nelaton catheter If
4. the catheter is inserted without applying lubricant it will rub and damage the urethra In addition do not apply excessive force because if the insertion angle is incorrect the catheter cannot be inserted 7 Once the Nelaton catheter reaches the inside of the bladder the water will begin to discharge urination right away Therefore be sure to set up a tray or receptacle beforehand to catch the water discharged from the catheter Refill the water inside the irrigator as necessary 8 Withdraw the Nelaton catheter and begin training Genital wash 1 Perform training using water for the main unit When water is used the surface may become sticky or not so smooth This is no problem regarding quality however the surface becomes easy to tear So pay sufficient attention to handling 2 Do not use any chemicals on the main unit Otherwise the product might fail 4 Storage 1 When the external genitalia becomes dirty wipe off the dirt using a soft cloth with a neutral detergent After that wipe it off using a cloth wetted with water 2 Store the product after drain water in the bladder by tilting body 2 When storing the product in the storage case dry the main unit adequately and apply the silicon oil to the urethral opening and the powder to the other regions of the genitalia in advance 3 Do not store the product in a place exposed to direct sunlight or one that becomes hot and humid Otherwise
5. tor stand 1 piece 4 Silicon oil 1 bottle 5 Baby powder 1 bottle 6 Catheter for urethral catheterization two pack 8 EG Nelaton catheter 16 Fr Balloon catheter Cautions concerning handling If resin products contact the external genitalia for a prolonged time the head might be deformed Treat the product with sufficient care Due to the nature of the material the external genitalia is likely to get dirty easily Note that stains of a ballpoint pen or marker on the product cannot be removed Light dirt on the face and neck parts can be washed with neutral detergent Do not use solvents such as thinner because they melt the resin parts To perform training hang the irrigator in a position approximately 30 cm higher than the urethral opening Use the dedicated irrigator stand Hanging the irrigator in too high a position might cause a water leak Be careful the additional water in irrigator If you add over the memory of 300cc of irrigator it might cause a water leak Since the external genitalia and bladder are bonded with each other do not remove the bladder out of the model In addition the external genitals are bonded with the main unit transparent section of the body too so that they cannot be removed In addition do not remove the two tubes from the bladder Otherwise a failure might occur The transparent section of this product is easily scraped Note that this se
Download Pdf Manuals
Related Search