Stairiser SX user manual 06.01.12.pub
Contents
1. i 1 ar Ramp Isolation 2 Key e Switch Ph N Mains Power RCD Unit Switch Uphill Platform Ramp Note Stairlift shown with optional seat amp Battery Back Box Stannah 3 OPERATING INSTRUCTIONS WARNING Before using your Stairlift please ensure that you read and familiarise yourself with these instructions Intended Use of the Stairlift The Stairlift must not be overloaded The maximum rated load is displayed on the carriage load plate and on the fold down seat e The Stairlift is designed only for the transportation of an independent person with impaired mobility either seated in a wheelchair or on the fold down seat provided The Stairlift is not designed for use by standing passengers or for the carrying of goods or animals of any kind When travelling on the Stairlift ensure that the wheelchair is aligned with the platform before mounting and the brakes are applied before the Stairlift moves Children should not be allowed to tamper or play with the Stairlift Joyriding can be dangerous For added safety always fold the platform when not in use and turn the key switch to the off position at both landing control stations and remove the key Check that pets or any other obstructions are not in the way before using the Stairlift The seat provided should be used by all passengers who are not seated in a wheelchair The seat should be manually lowered before use and manually ra2. stairlift is fully unfolded enabling the user to embark Ensure that the barrier arm is fully unfolded 3 To move the Stairlift to the upper landing using the carriage controls Operate the joystick in the direction of travel The lower barrier arm will unfold Maintain pressure on joystick to travel up On arrival at the upper landing continued pressure on the joystick will raise the upper barrier arm enabling you to disembark 10 3 FOLDING OPERATIONS WITH THE STAIRLIFT AT THE UPPER LANDING Ensure the Isolation keyswitch on the landing is set to the on position Insert and turn the key in the landing station control station to turn on the power 1 To fold the Stairlift Press the fold button on the landing control station maintaining pressure until the stairlift is fully folded 2 To unfold the Stairlift Press the unfold button on the landing control station maintaining pressure until the stairlift is fully unfolded enabling the user to embark Ensure the barrier arm is fully unfolded 3 To move the Stairlift to the lower landing using the carriage controls Operate the joystick in the direction of travel The upper barrier arm will unfold Maintain pressure on joystick to travel down On arrival at the lower landing continued pressure on the joystick will raise the lower barrier arm enabling you to disembark Stannah Stannah 5 SAFETY FEATURES 2 Safety Gear Th
3. constant pressure until the stairlift is fully folded Push to call or send the platform 9 Push to fold do platform Keyswitch for Power on or off To landing il h D Push to unfold control platform station Power Indicator light green Landing control station 3 TO OPERATE THE STAIRLIFT USING THE CARRIAGE CONTROL stations S annah The Stairlift is ready to operate when the green on indicator is illuminated on the carriage control station and the platform has been unfolded e Push the joystick in the required direction of travel and maintain constant pressure The stairlift will begin to move once both barrier arms are lowered The stairlift will stop immediately the joystick is released or the emergency stop button pushed e There is a 2 second time delay before the Stairlift can resume operation after stopping The Stairlift will stop automatically at the top or bottom of the stairs e An audible alarm will sound when the alarm button yellow is pressed Release the button to stop the alarm Emergency stop button Green power on indicator Audible alarma gynon Direction of travel joystick Carriage control station NOTE The stairlift is only ready to travel when the red power on indicator is illuminated on the carriage control station 6 GENERAL STAIRLIFT CARE PROCEDURES Stannah External Stairiser Note Owners of the external Stairiser should ensure the lift
4. is tested for at least 4 journeys once a week A cover is provided to help protect the carriage controls from the weather elements when not in use 6 GENERAL STAIRLIFT Stannah CARE PROCEDURES Cleaning Paint Finishes These should be cleaned with a soft cloth using an aerosol type of furniture polish Plastic covers These should be cleaned with a soft cloth using soapy water Aluminium rail This should be cleaned with a soft cloth using soapy water Carriage handrail This should be cleaned with a soft cloth using soapy water NB Never use abrasives or solvents to clean the Stairlift decor DISMANTLING REMOVAL OF STAIRLIFT You should not attempt to dismantle any parts of the stairlift Such work should be entrusted only to competent personnel with relevant expert knowledge and training Advise any malfunctions of the lift operation to the Stannah Service Office or to our service personnel when they are next in 16 3 FOLDING OPERATIONS WITH THE STAIRLIFT AT THE LOWER LANDING Stannah Ensure the Isolation keyswitch on the landing f is set to the on position Insert and turn the key in the landing station control station to turn on the power 1 To fold the Stairlift Press the fold button on the landing control station maintaining pressure until the stairlift is fully folded 2 To unfold the Stairlift Press the unfold button on the landing control station maintaining pressure until the
5. keyswitch to prevent further use Manually lift the other barrier arm and the platform and secure in the upright position using the strap provided and warn any potential users not to release the strap since the platform is no longer connected to the drive Note No attempt should be made to operate the lift with the strap in place
6. 24 9 NOTES 06 01 12 L Tech documents Stairiser SX Stairiser SX user manual 06 01 12 pub Part number 4000508 Stannah The Stannah Stairiser SX User Manual Make sure you understand the contents of this booklet Keep it handy for reference Your Stairlift Number is Please quote this number on any correspondence Your local Stannah Service Office If your Stairlift fails to operate and BEFORE contacting the Service Office please read page 18 of this User Handbook This can save time and also save you the cost of an unnecessary service call Stannah 9 NOTES The Stannch Promise Always true to our word Your Stannah Guarantee Stannah Lifts Ltd are proud to have secured British Standards BS EN ISO 9001 Quality Assurance Certification and are pleased to guarantee the whole of our materials and workmanship for a period of twelve months from completion of installation and handover of the lift to you on the following conditions That you enter into a proper service contract with our sister company Stannah Lifts Service Limited As in the motor car industry your new lift must be properly serviced and maintained to keep it working at its very best Should any defect in workmanship or material become evident within the twelve month period we undertake to repair or replace the defective part as soon as possible during our normal working hours Monday to Thursday 8 00am to 4 45pm Friday 8 00am to 3 45pm Shoul
7. d attendance be required outside normal working hours it will be subject to a reasonable excess charge The address and telephone number of your nearest Service Branch will be given on the Completion Notice Which you should sign prior to handover of the lift to you The guarantee does not cover repairs replacements or adjustment which may be required as a result of ordinary wear and tear wilful or accidental damage misuse neglect or any other cause beyond our control That all outstanding monies have been paid to us STANNAH LIFTS LIMITED Anton Mill Andover Hampshire SP10 2NX Tel 01264 339090 Fax 01264 337942 www stannah co uk 22 Stannah 9 NOTES CONTENTS Your Stannah Guarantee 1 Introduction 2 Pictorial View 3 Operating Instructions 4 Emergency Operation 5 Safety Features 6 General Stairlift Care Procedures 7 Trouble Shooting Guide 8 Optional Extras 9 Notes Stannah PAGE 2 11 13 15 16 18 19 NOTE Whilst every effort has been made to ensure the clarity and accuracy of this handbook we cannot be held responsible for damage or injury resulting from negligence or misuse of this Stairlift Stannah 1 INTRODUCTION 9 NOTES This users handbook is to help provide an understanding of correct and safe use of The Stannah Stairiser It is important that you arrange for the lift to receive regular inspection and servicing by a competent person at intervals not exceedi
8. e Stairlift is fitted with a safety gear which will lock the carriage onto the rail if the stairlift overspeeds If the safety gear does operate it should be released only by an authorised service engineer Please note in this instance the Stairiser will not emergency lower 3 Residual Current Device RCD This unit is mounted adjacent to the mains power switch and protects against electric shock from the mains power supply Indicator shows red OD tee wea fl when RCD is on nuoce 3 ssa i e Reset Button Green i TEST BEFORE USE TEST O Test Button Blue NOTE Check the operation at least every three months To do this press the button marked Test and the Residual Current Device RCD should trip To reset the unit press in the Reset button Stannah 5 SAFETY FEATURES Your Stairlift has many built in safety features to protect the user and other occupants within the premises Some of these integral features are listed below 1 Pressure Sensitive Surfaces Touch sensitive surfaces are provided on the end ramps and underside of the platform These stop the Stairlift automatically if they meet an obstruction during travel To remove any obstructions reverse the direction of travel for a short distance by pressing the up or down landing push button control as appropriate Pressure Sensitive Safety Surfaces 14 4 This procedure must only be undertaken in an emerg
9. ency due to loss Stannah EMERGENCY OPERATION of power to the lift and must only be undertaken by authorised personnel with the lift under constant surveillance To hand wind the Stairlift proceed as follows 1 Switch off the mains electrical supply to the stairlift and remove the main supply fuse from the main supply switch so that there is no possibility of the carriage being operated Remove the plastic cap positioned i iM above the carriage controls and insert the hand winding tool through the hole in the carriage top panel Locate the hand winding tool in the boss and rotate the hand wheel in the required direction until the platform is approx 20mm from floor level Note the lift may be damaged should the platform be allowed to proceed beyond this point Remove rubber bung from side of the lift the barrier arm needs to be raised Using the hand winding wheel locate in hole and push down at the same time push the barrier arm towards the carriage and lift arm up Release passenger To Lower arm repeat procedure 12 Stannah EMERGENCY OPERATION Once the passenger has been released isolate the unit via the mains keyswitch to prevent further use Manually lift the other barrier arm and the platform and secure in the upright position using the strap provided and warn any potential users not to release the strap since the platform is no longer connected to the drive Note No attempt should be made to operate the li
10. ft with the strap in place WARNING The carriage must never be run with the hand or power winding tool in position otherwise injury could result The tool must always be removed after hand winding If the Stairlift will not run the unit should then be checked by your local Service Office before the Stairlift is returned to service unless stoppage was caused by an obvious fault see page 16 Stannah EMERGENCY OPERATION This procedure must only be undertaken in an emergency due to loss of power to the lift and must only be undertaken by authorised personnel with the lift under constant surveillance eae Battery powered Winding optional To power wind the Stairlift proceed as follows Switch off the mains electrical supply to the stairlift and remove the main supply fuse from the main supply switch so that there is no possibility of the carriage being operated Remove the plastic cap positioned above the carriage controls and insert the power winding tool through the hole in the carriage top panel Insert the jack plug in to the socket on the carriage Locate the powered winding tool in the boss and press the button on the box with constant pressure until the platform is approx 20mm from floor level Note the lift may be damaged should the platform be allowed to proceed beyond this point Using the power winding tool follow step 4 on page 11 Once the passenger has been released isolate the unit via the mains
11. ised after use WARNING Power Supply Failure If people who cannot use the stairs unaided are likely e to be alone in the premises we recommend the installation of an alarm system so that in the event of a power supply failure help can be summoned Stannah 7 TROUBLE SHOOTING GUIDE FAULT CURE No power to lift and no indicator The safety gear has engaged lights illuminated Call Service Office NOTE The Stairlift is only ready to travel when red LED indicator on the carriage control panel is illuminated This indicates all mains supply switches and safety circuit switches are set to the on position Stannah 7 TROUBLE SHOOTING GUIDE If your Stairlift fails to operate check the following list before contacting your local service office it could save you time and the cost of an unnecessary service call FAULT CURE Mains power switch is in the OFF position Switch mains power to ON position Mains fuse has blown confirmed by loss of light on mains power switch Replace 13 amp fuse in the mains power switch Residual Current Device RCD mounted adjacent to mains switch has tripped Confirmed by loss of red indicator on RCD unit and carriage Reset by pressing the green reset button on the unit NB If the RCD repeatedly trips call Service Office Emergency Stop switch on carriage control station stuck in position Confirmed by loss of light on Car
12. ng six months after the 12 months guarantee period Failure to ensure servicing is carried out could lead to unreliable or unsafe operation For all enquiries regarding servicing please contact your local Stannah Service Office at the address given on page 1 of this booklet A Service Log Card supplied by the Service Office will be completed after each service visit As requested by the European Legislation On Machinery Regulations the following maximum noise emission has been measured at a distance of 1 metre from the stairlift carriage Running 55 dBA Owing to our policy of continual product development we reserve the right to alter specifications and dimensions without prior notice At the date of publication this manual was up to date and should there be any significant differences we will endeavour to advise you with an addendum Stannah 21 Stannah 8 OPTIONAL EXTRAS Hand held attendant control station The attendant control station plugs into the carriage control panel The attendant has sole control of movement of the carriage to assist the carriage user When unplugged all normal services with landing and carriage controls are resumed 20 2 Stannah PICTORIAL VIEW PLEASE NOTE The external appearance of your Stairlift may differ slightly from that shown below Carriage Upper Landing Control Barrier Arms aa o Station Rail Battery i h j Back up f Downhill Box l i Platform
13. riage control station Free emergency stop switch to ON position An isolation keyswitch fitted in to the mains supply is set to OFF position Lift does not function Insert key and rotate 90 clockwise to ON position Keyswitch on landing control station set to OFF position Landing controls do not function The pressure sensitive safety surfaces on the stairlift platform have sensed an obstruction Insert key and rotate 45 clockwise to ON position Green indicator light on Remove any obstructions check that the pressure sensitive safety surfaces return to the unobstructed position and are operating freely TO OPERATE THE STAIRLIFT USING THE LANDING CONTROL STATIONS Stannah Insert and turn the key to turn on the power to the landing station indicated by the green light To unfold the stairlift press the unfold button maintaining constant pressure until the stairlift is fully unfolded To move the stairlift press the up or down button Maintain constant pressure on the button the barrier arm will fold down and then the stairlift will move in direction required To stop the stairlift at any time release the button To re start wait 2 seconds then re apply constant pressure to the direction button The stairlift will stop automatically at the top or bottom of the stairs To fold the stairlift press the fold button maintaining
Download Pdf Manuals
Related Search