G1W-H Manual - Spy Cameras
Contents
1. 13 Specifications 15 Precautions StS SS I ee A Se SS Se A See SSS StS as 16 Frequently Asked Questions FAQs 17 How do unfreeze the device 17 Why is there unexpected interference 17 Why is the file length inconsistent 17 Why won t the camera auto start 17 What is the battery life 17 SOW Tec www spytecinc com GETTING STARTED Components Camera with rechargeable battery USB cable Car charging unit Suction holder User Manual Features 1080P HD Video amp Audio Recording Up to 64 GB microsD Novatek NT96650 amp Aptina ARO330 G Sensor allows camera to stabilize if jarred and prevents loop recording over footage taken during an accident 2 7 screen Lightweight 140 degree wide angle Tilting suction mount Loop Recording Functions as a regular camera or dash camera www spytecinc com Powering Up the Device Plug the USB cable into the dash cam device via the small USB port and attach the cord to the external power supply via the larger USB port computer or adapter or use the car charger Power button You may allow the device to charge until fully charged and begin programming when finished or as the device charges press2. moved deleted dragged dropped or copied pasted as needed www spytecinc com Specifications Sensor Solution Lens Zoom LCD Display Lens Angle Night Video Video Output Picture Video Resolution Audio Codec G Sensor Memory Interface Motion Detection Shutter Battery Spy Tec 3M CMOS Sensor Novatek 96650 fixed focus lens 4 x digital zoom 2 7 inch 16 9 TFT LCD 120 degree ultra wide angle lens Enhanced led lights AV SVBS composite TV signal output NTSC PAL High definition TV terminal interface HDMI output JPG file format Maximum output pixel 5 0 Mega Pixels 1920x1080 30 fps 1280x720 60 fps 848 x 480 30fps 640x480p 30fps Built in Microphone Speaker AAC MPEG4 Support External media SDHC supports 64GB Max microSD card NOT Included USB HDMI AV microSD card slot Support Electronic shutter 3 7V 300mAh Poly www spytecinc com Precautions Strictly observe relevant laws as this product cannot be used for any illegal purpose The user is responsible for any legal matters The maximum life of the battery will diminish if not used for a long time so recharge it before use or storage MicroSD card real capacity may be slightly less than the nominal value If the capacity of the card is abnormal reformat the card Any previously stored data will be lost after reformatting the card The security and integrity of the internal files on the G1W
3. H are not covered under warranty Do not adjust settings or placement while driving www spytecinc com Frequently Asked Questions FAQs How do I unfreeze the device Press the Menu button Wait a few seconds to see if the device unfreezes Try this again If the Menu button does not return to the menu so that you may resume activity turn the power to Off and restart the device Why is there unexpected interference If attached to a continual power supply make sure that the USB is securely plugged into the electrical source with cable completely connected to device Press the cable in if any loosening has occurred Why is the file length inconsistent Go to the Loop recording settings and select a set time frame for recording Why won t the camera auto start The camera may be set to motion detection What is the battery life The battery is a very small capacity Li ion intended for use in emergencies It only has a battery life of around 10 minutes www spytecinc com
4. abilizes the image in the event that a wreck or other physical disturbance occurs The G Sensor prevents any recorded footage during a physical disturbance from being lost by not allowing Loop mode to have effect thus not allowing the device to record over the footage by proceeding with regular continual recording To access G Sensor settings select G Sensor from the Menu and use the Up and Down buttons to navigate settings On Off High Medium or Low The High settings will detect slight physical disturbance whereas Low will detect only major physical disturbance Press the Capture button Date Stamp The date stamp may be enabled or disabled by selecting Date Stamp from the menu Select either On or Off and press the Capture button to save changes Video Settings Menu Set the Time and Date To set the time and date use the Up and Down buttons to select the System Setup icon last on the right of the settings menu and press the Capture button Here Time and Date are listed with an arrow pointing to changeable values Use the Up and Down buttons to adjust the values After you have found the correct value for the year press the Capture button Now you can adjust the Date Format by pressing the Up and Down buttons Press the Capture button after selecting the desired format Auto Power Off By selecting Auto Power Off in the menu the camera is able to set off automatically after 3 Minutes 5 Minutes or 10 Minutes This may be disab
5. ewer capture still L video R power button www spytecinc com Video Menu To access the Video menus if the device powers on and is not automatically in Video mode press the Mode button to the right of the screen until you are in Video mode shows a film strip icon to the top left of the screen and then the Menu button Press the Menu button twice for Setup Resolution After selecting the Resolution option navigate using the Up and Down buttons to the left of the screen Select the desired resolution 1080FHD 720P 60FPS 720P 30FPS WVGA or VGA and press the Capture button for changes to take place Loop Recording Loop recording will allow continual recording as the camera records continually over the previous footage To disable loop recording select the Loop Recording option from the Menu and navigate using the Up and Down buttons to the left of the screen to select Off and press the Capture button You may also set Loop recording to 3 Minutes 5 Minutes or 10 Minutes Wide Dynamic Range WDR Allowing the camera to use WDR technology automatically adjusts lighting features to enhance clarity and reduce glare To access WDR settings select the WDR option from the Menu and navigate using the Up and Down buttons to the left of the screen to select On or Off and press the Capture button Exposure The exposure settings allow you to adjust the picture quality by enabling a certain amount of light to pass throug
6. h a unit area of the lens By adding more value the greater the amount of light to pass through the camera as it is filming or taking still photos and likewise the lesser the value will give lesser light to the capture Settings may be set higher for nighttime to reduce glare and lower for daytime to get similar results Settings for exposure are as follows 2 0 1 0 1 3 2 3 4 3 5 3 0 0 5 3 4 3 2 3 1 3 1 0 and 2 0 To adjust exposure select the Exposure option from the Menu and navigate using the Up and Down buttons to the left of the screen to select On or Off and press the Capture button Motion Detection By enabling motion detection the camera will record as motion is sensed by the lens Using this feature will not permit continual recording unless motion is continuous To enable or disable motion detection select the Motion Detection option from the Menu and navigate using the Up and Down buttons to the left of the screen to select On or Off and follow by pressing the Capture button Spy Tec www spytecinc com Record Audio There are settings to enable or disable audio recording available from the menu by selecting the Record Audio option and navigating using the Up and Down buttons to choose either On or Off In Off mode only video is recorded and in On mode both audio and video are recorded Once the On or Off option is highlighted press the Capture button to save the selection G Sensor The G Sensor st
7. hea ss SS Ste a a Sie SHAS Sa Se SS eee Sele 10 Screen Protection gt gt gt gt D Se oe ee ee ee ee o gt ee Se ee 10 REED See ae ee ee SS A eS ee ee eee E 10 Format ii eS es ea a Se a ee NDA Sa RS 10 Default Setting 10 Version ee ee ee ee 10 Still Capture Menu 11 Capture Mode 11 Resolution 11 Sequence 11 Quality 11 Sharpness Sais Se eS eS SS Se NO DSR SENSO SS Ss 11 White Balances gt SS Sr Sr Sr a DE A DP Sa A e 12 EIA A o ag AN 12 PA ia e a A die O co ir dd 12 Exposure 12 Anti Shaking 15203 Ss S365 4 5 32S SS dei es a Se os 12 ADA A O i A ee ee 12 Date Stamp 12 Still Capture Settings Menu 13 Set the Time and Date 13 Adding License Number Set to Timestamp 13 Auto Power Off Sse Ser St e E A A Se ee Ses 13 Video Recording 13 Taking Pictures 13 Accessing Adding and Deleting Files
8. ing the image for clarity Select the Sharpness option from the Menu and navigate using the Up and Down buttons to the left of the screen to select Strong Normal or Soft and press the Capture button www spytecinc com White Balance There are settings to enhance white balance available from the menu by selecting the White Balance option and navigating using the Up and Down buttons to choose either Auto Daylight Cloudy Tungsten or Flourescent In Auto mode settings will adjust themselves to changes in lighting In Daylight mode settings will allow greater clarity for footage taken in daylight as with Cloudy settings for cloudy conditions The Tungsten mode is best for basic indoor use whereas the Flourescent setting adds brightness and warmth to the indoor image Once the desired option is highlighted press the Capture button to save the selection Color To change the color of images select the Color option and use the Up and Down arrow buttons to the left of the screen to choose Normal Black and White or Sepia reddish brown effect Press the Capture button to finalize the selection ISO The ISO settings allow for greater or lesser allowance of incoming light and may be accessed by selecting ISO from the menu In certain lighting conditions a higher ISO setting may create undesirable noise Select either Auto 100 200 or 400 and press the Capture button to save changes Exposure The exposure settings allow you to adjus
9. into the camera after reformatting and press the power button www spytecinc com Attaching the Device to Tilting Suction Mount On the top of the camera you will see an open slot for the tilting suction mount at center Align the mount s arm with the camera device s open slot pressing down and forward to secure with mount Opening for dash mount Now you may remove the clear film on the suction and attach to the glass surface To remove the suction mount pull the tag on the right facing side of the suction and gently pull off the glass surface to detach G1W H with mount www spytecinc com Menu Options Press the Menu button on the right side of the screen to access the Video menu and press the Menu button again to access the Settings menu Use the Up and Down arrow buttons to the left of the screen for navigation of menu selections Once you have found the desired menu option press the Capture button to make a selection The capture button features a still and video icon but is still only one button for both features To escape the menu screen press the Mode button Accessing Menu Items Buttons are located on top of the MVS device O Power on off M Menu Buttons are also located on each side of the viewing screen Up Arrows Navigates the selection options upward Down Arrows Navigates the selection options downward REC Enters Menu according to mode MODE Changes mode from Video Still Camera or Vi
10. led by selecting Off in the menu After highlighting the selection press the Capture button to update settings Beep Sound By selecting Beep Sound in the menu the beep sound may be disabled or enabled by selecting either On or Off and pressing the Capture button to save settings www spytecinc com Language Select the Language icon from the menu to choose English French Spanish Portuguese German Italian Simplified Chinese Traditional Chinese Russian or Japanese and pressing the Capture button to save settings TV Mode Use the AV Out port to connect an HDMI cable to the camera for viewing images on a television monitor Select the TV Mode icon from the settings menu and choose either NTSC National Television System Committee or PAL Phase Alternate Line depending on user preferences Press the Capture button to save changes Frequency Select the Frequency icon from the menu to choose either 50 Hz or 60 Hz and press the Capture button to save settings When adjusting frequency settings consider the computer or other monitoring tool that will be used for retrieval of files to avoid flicker In the United States 60 Hz is commonly used Otherwise the 50 Hz setting would need to be selected Screen Protection Select the Screen Protection icon from the menu to enable or disable screen protection by choosing 3 minutes 5 minutes 10 minutes or Off in the menu Press the Capture button to save changes If you choose to
11. q TEC G1W H Dash Camera User Manual Spy Tec www spytecinc com GETING STARTED esses ch Usa a ps E aos a o a a cre aa 3 Components 3 ESAS sus A A eS a a o ta a eS 3 Powering Up the Device 4 MicroSD Memory Card for Data Storage 5 Attaching the Device to Tilting Suction Mount 6 Menu Options 7 Accessing Menu Items 7 Video Menu 8 Resolution 8 Loop Recording 8 Wide Dynamic Range WDR 8 Exposure 8 Motion Detection 8 Record Audio 9 G SensOfs v SS SI A Se A A ae Se 9 Date Stamp 9 Video Settings Menu 9 Set the Time and Date 9 Auto Power Off ses SSeS 3 Sie Sr Sis SiS SSS eee Se eee e i as 9 Beep Sound 9 Language 10 TY Moges A Se i SS Sp eS See E 10 Frequenty S
12. sing the Up and Down arrow buttons to the left of the screen to select the desired Capture Mode Single 2S Timer 5S Timer and 10S Timer and press the Capture button for changes to take place This setting allows the user to have extra time for capturing an image after the Capture button is pressed Resolution Resolution settings will allow for picture quality to be adapted according to the user s specifications Select the Resolution option from the Menu and navigate using the Up and Down buttons to the left of the screen to select an option and press the Capture button Options for this feature are 3M 2MHD VGA 1 3M 12M 10M 8M and 5M Sequence Enabling the sequence feature allows the camera to take 3 images within 1 second Select the Sequence option from the Menu and navigate using the Up and Down buttons to the left of the screen to select On or Off and press the Capture button Quality The quality settings allow you to adjust the picture quality by enabling a certain amount of light to pass through a unit area of the lens By adding more resolution the greater the file size written to the microSD card Settings may be set to Fine Normal or Economy Select the Quality option from the Menu by navigation using the Up and Down buttons to the left of the screen and press the Capture button Sharpness This feature enables the camera to take pictures with greater or lesser sharpness to increase or decrease pixel proximity compress
13. t the picture quality by enabling a certain amount of light to pass through a unit area of the lens By adding more value the greater the amount of light to pass through the camera as it is filming or taking still photos and likewise the lesser the value will give lesser light to the capture Settings may be set higher for nighttime to reduce glare and lower for daytime to get similar results Settings for exposure are as follows 2 0 1 0 1 3 2 3 4 3 5 3 0 0 5 3 4 3 2 3 1 3 1 0 and 2 0 To adjust exposure select the Exposure option from the Menu and navigate using the Up and Down buttons to the left of the screen to select On or Off and press the Capture button Anti Shaking The Anti Shaking settings allow for image stabilization when physical interference occurs Select either On or Off and press the Capture button to save changes HDR This setting is not accessible Date Stamp The date stamp may be enabled or disabled by selecting Date Stamp from the menu Select either On or Off and press the Capture button to save changes www spytecinc com Still Capture Settings Menu Set the Time and Date To set the time and date use the Up and Down buttons to select the System Setup icon last on the right of the menu and press the Capture button Here Time and Date are listed with an arrow pointing to changeable values Use the Up and Down buttons to adjust the values After you have found the correct value for the
14. the power button 5 and wait for the screen to appear When fully charged as indicated by the battery icon to the bottom right on the dash cam device screen you may remove the device from the charger and or continue using the direct power source If using battery power alone the battery icon will have a diminishing fill eventually resulting in an empty outline indicating a low battery www spytecinc com Micro SD Memory Card for Data Storage On the right facing side of the G1W H device you will see a slot for the Micro SD card not included Place the microSD memory card up to 64GB text facing upwards into the slot and push in until it clicks into place To remove or replace the microSD memory card simply push in until it clicks in out of place Micro 5D card slot If the microSD card is unrecognized a blue screen will appear with the message PLEASE INSERT SD CARD Plug the microSD into an adapter and into your computer via USB Now a pop up window will appear and ask you to reformat your card Please note that any data stored on the microSD card will be deleted during the reformatting process Click Yes and allow the reformatting to begin Once the reformatting is complete detach card from adapter and put back into the camera device If no pop up appears as the microSD is attached via USB go to the Windows menu and select Computer Right click the removable drive and select Format Place the microSD card back
15. tton Accessing Adding and Deleting Files To view files from the microSD card in the screen press the MODE button twice to enter the Playback menu Use the Up and Down arrow buttons to the left of the screen to navigate videos and pictures Spy Tec www spytecinc com Press the Menu button to either Delete or Protect the files Protecting the files allows the current image to be set as Locked or Unlocked By choosing the Lock All or Unlock All option the entirety of microSD files will be selected When files are locked a key icon will appear at the top center of the screen disabling any changes to the file It is also possible to view a Slide Show from the Playback menu by selecting the last menu option Always use the Capture button to make menu selections after desired menu navigation To escape the menu press the MODE button In the Playback screen press the Menu button twice to access the Setup menu Here settings may be changed for Date Time values License Number Auto Power Beep Sound Language TV Mode Frequency Screen Protection IR LED Format Default Setting and Version just as explained in Video Settings 11 To access files on the Dash Camera device through a computer connect the Dash Camera device by USB to a computer and go to MY DOCUMENTS The device will show up as a Removable Disk with Music Picture and Video folders Each folder contains files as stored on the device s Micro SD card These files may be
16. use Screen Protection the screen will shut off but the camera will keep recording as settings prescribe IR LED Select the IR LED icon from the menu to enable or disable Infrared LED by choosing either Off or On in the menu Press the Capture button to save changes Format Select the Format option from the menu to delete contents from the SD Card This option reformats the microSD memory card after selecting the SD Card option only option Confirm that all data will be deleted by choosing OK or Cancel Default Setting By choosing to return to Default Settings the menus will automatically convert to Russian Be prepared to change your language settings before setting back to default Otherwise this setting allows all other previous changes to default back to factory settings To go back to default settings choose Default Settings from the menu and press the Capture button A prompt will ask you to confirm your selection Version Select Version from the menu and press the Capture button to view the installed application information Say TEC www spytecinc com Still Capture Menu To access the Still Capture menus press the Mode button to the right of the screen until you are in Camera mode shows a camera icon to the top left of the screen and then the Menu button on top of the camera and press the Menu button twice for Setup Capture Mode After selecting the Capture Mode option press the Capture button Navigate u
17. year press the Capture button Now you can adjust the Date Format by pressing the Up and Down buttons Press the Capture button after selecting the desired format Adding License Number Set to Timestamp To add a license number to the timestamp use the Up and Down buttons to select the System Setup icon of the main menu and press the Capture button There is a character for each row in this setting Use the Up and Down buttons on the left of the screen to find the appropriate character and press the Capture button to adjust the next character Press the Capture button after selecting the desired format Auto Power Off By selecting Auto Power Off in the Menu the camera is able to power down automatically after 3 Minutes 5 Minutes or 10 Minutes This may be disabled by selecting Off in the menu After highlighting the selection press the Capture button to update settings Video Recording When the G1W H is powered on it automatically goes to the Video screen To start recording press the Capture button To end recording press the Capture button again To have automatic recording take place upon powering the device adjust settings as explained in the previous section Video Settings 11 Taking Pictures To take still pictures with the G1W H press the MODE button once The screen will give a smaller view and a camera icon will appear to the top left of the screen To capture an image as seen in the screen press the Capture bu
Download Pdf Manuals
Related Search