SEVEN STARS
Contents
1. ri SA LASER DISPLAY SYSTEV USER MANUAL SEVEN STARS Big Dipper Laser Science And Technology Co Ltd REVE LAN Please read this manual carefully before operating LASER DISPLAY SYSTEM USER MANUAL Model B1O2RGB 4 Notices information 1 This is IV laser product Avoid eyes direct exposure to the laser light 2 Operate abide by the user manual Do not disassemble or repair the system by yourself When there is a problem please contact technician or your local dealer 3 Installation should be done by professional technician 4 Please set the laser product far away from those things as strobe light 5 The system should be kept dry please don t exposure the system to wet or dust laden environment Need water proof protection when use it in the open air 6 Do not touch the system by wet hand or pull the power cable forcefully 7 The work temperature is 10 40 C so the laser conduct doesn t work normally until it reach the work temperature when taking it in from cold environment 8 Do not turn on or off the system frequently and avoid keep it working for long time 9 Prevent from strong vibration or G shock to the system 10 Prevent other harmful objects from entering the system 11 Keep at least 1 meter between the system and the objects in the lighting Page 1 12 Connect the power cable after the system has been installed 13 Before powering on the system be sure the power cable is connected in2. l mode 2 Pattern A 0 255 A Pattern selection 3 Pattern B 0 255 B Pattern selection 4 Pattern C 0 255 C H Pattern selection 5 Pattern D 0 255 D H Pattern selection 6 Strobe 0 15 No SODE 16 255 Strobe adjusted from slow to fast 0 5 No move Horizontal 7 Mania 7 Move 128 167 Auto Left Right 168 200 Auto Right Left 201 255 Auto Bounce Right Left 0 5 No move 6 127 Manual 8 ae 128 167 Auto Up Down 168 200 Auto Down Up 201 255 Auto Bounce Up Down 0 5 No zoom Zoom 6 127 Manual zooming 9 mode 128 167 Auto zooming out 168 200 Auto zooming in 201 255 Auto zooming 10 X axis 0 180 Manual rotation rotation 181 255 Auto rotation from slow to fast 11 Y axis 0 180 Manual rotation rotation 181 255 Auto rotation from slow to fast Page5
3. lated system before maintenance Declare The end user of this product should abide by the above instructions and warnings Performing actions which was advised not to do so as stated by this manual may void the warranty of this laser display system All products made from Big Dipper Laser Company have anti fake identification please verify the anti counterfeit label at the bottom of the case to ensure the interests of consumers The power of interpretation to the matters mentioned in this manual belongs to Big Dipper Page 7 7 nE 0 180 Manual rotation 12 rotation 181 217 Auto clockwise rotation 218 255 Auto anti clockwise rotation 0 63 Normal display 13 64 127 Dot line display Depey rooe 128 191 Subsection display 192 255 Dot display 0 31 Red Green Blue Purple 32 63 Red 64 95 Green 96 127 Blue 14 Color 128 159 Purple amp Blue 160 191 Red amp Green 192 223 Red amp Green amp Blue 224 255 Green amp Blue amp Purple 0 199 Normal Operation aici 200 255 Reset Remark On the DMX 512 mode the LASER display system will shut off if the DMX 512 signal intermit ADDRESS SETTING DMX address setup 1 When the 10 code is ON a and the 1 code is OFF It is sound control mode host LASER b and the 1 code is ON It is AUTO play mode host LASER c and the 2 code is ON It is Slave LASER Remark When in Mas
4. ter slave mode either can be chosen for the Host In asynchronous situation the slave will run after the Host automatically to reach synchrony 2 When the 10 code is OFF It is DMX control Page 6 2 Be sure the power socket output voltage matches that off the LASER display system 3 Ensure the fan and the exhaust is not blocked 4 The LASER display system should be statically fixed 5 It is essential to be earthed well for the sake of safety Back panel 1 Fan 2 DMX512 signal output socket 3 DMX512 signal input socket 4 Mic vice signal receiver 5 Binary address switch 6 Power socket 7 Power ON OFF Page 3 Technical Parameters Model Parameters B102RGB 4 1 LASER diode Red Green Blue 2 Power supply AC220 110V 50 60HZ 3 LASER power R gt 120mW 2 G gt 40mW B gt 400mW 4 Scanner angle 22 5 DMX Channels 15 6 Control mode Sound Auto play DMX master slave 7 Four eyes asynchronous control diagram Effect flashing Horizontal vertical zoom X Y Z Lrotation Dotted line show color etc 8 Dimensions 535 208 130MM 9 Net weight 5 5 6 1KGS Gross weight Page 4 DMX channel setting Channel DMX512 Operating mode 0 63 Shut off the LASER diode 1 Control 64 127 Sound control mode mode 128 191 Auto control mode 192 255 Manua
5. to the power socket well 14 Turn off the system for 25 minutes after running constantly for three hours ensure that the system is able to cool down ina suitable environment 15 Turn on the computer after the laser display system is on or you must power on the computer again 16 When to be transported use the original package to avoid Shaking er 17 m This sign indicates separate collection for electronics and electrical equipment Inspection information In order to use the product securely and properly please read the manual before using and follow the instructions strictly to prevent personal safety trouble and product damage caused by misuse Take care of the product check the possibility of the product damage caused by transportation and check all the machine and listed accessories are present upon receipt of the product 1 x LASER display system 1 x User manual 1 x Power cable Installation 1 Be sure that there is no flammable or explosive subjects nearby The least clear proximity from the system should be 1 5 meters At the same time keep more than half a meter between the wall and LASER display system Page 2 Maintenance Clean the lens regularly Do not use a wet cloth or chemicals use a damp cloth The maintenance period depends of the usage frequency and surrounding conditions of the LASER display system It recommended that the system should be cleaned every 15 days Warning Power off any re
Download Pdf Manuals
Related Search