7x10W 4IN1 Indoor Par Light User Manual
Contents
1. x10W 4IN1 Indoor Par Light User Manual Introduction Welcome to use High Power 4IN1 Indoor LED PAR Light under Neo Neon Brand This fixture applies high power LED technology and enjoys long life span It can work in DMX Manual Auto Sound and Linkable modes It is also user friendly which makes it suitable for all kinds of entertainment and decorative industries The fixture can be used as a single unit or a PAR Light Set 4 PCS or 4 N PCS Packing Listing Se CW N Fe IRDIP 9007456 01D 13 7x10W 4IN1 Indoor Par Light One User Manual o nnan One Power Cable One DMX Cable One 1 7 Specification 1 Voltage 110V 240V 50 60Hz 5 Connector DMX512 3 PINS XLR 2 Power Consumption 71W max 6 Weight 2 1kg 3 Light Source 7 10W 4IN1 LED 7 Dimension L150 X W213 X H203 4 Working Modes DMX Auto Manual Sound Master Slave aution Read the user manual before use and follow the instruction Please connect the fixture to the earth linked power supply and be sure that it is the same as the rating voltage on the fixture The fixture is pack without any spare part Please contact the manufacturer when maintenance is needed Sd Please note that the working temperature is between 20 C and 40 C Please contact the professional engineers for repair Addition If the power sockets is not e2. 00 Operation Instruction 1 Stand Alone Mode 1 Stand Alone Mode Auto manual and sound 2 Working Mode Setting Press different button to enter different working mode 2 Master Slave Mode 1 Master Slave Mode Auto manual and sound mode and no need to use controller 2 Working Mode Setting Select one unit as the master auto sound or manual set up DMX address A001 in other units and all lights light Sequence Par 0 at the same time Master Slave Mode AC Power 100 240VAC Signal Par Par 0 Signal Par Par 0 Signal Par Par 0 50 60Hz Host A001 A001 Light Light Light 3 Cable Connection in Master Slave mode Connect the DMX output of the master and the input of the first slave unit with XLR XLR cables then connect the output of the first slave unit with the input of the second unit the rest may be deduced by analogy until all the slave units are connected 4 Four Channel Control Mode Set up 4 channel mode for all the Par Lights in the loop Press Menu Button until 4 CH is showed Note If more than one piece master unit or DMX controller 4 channel controller is connected the slave units may work out of the way 3 Master and Slave Working Mode for Par Light Set 1 Working Mode Setting Set up the DMX address A001 on all the Slave units and Par Light Sequence Par 14 Four pieces Par lights can form one set Or the fixture can link with other products Neo Neon produces so as to get more abundant stage effect Fi
3. arth linked please add the grounding connection to the housing of the fixture so as to avoid the damage from the accumulated static or charge PAR Light Setting 1 Five Working Modes 1 Auto Run the internal program automatically 4 DMX512 DMX control Mode 2 Manual Run the program manually 5 4 Channels Mode Run under the control by 3 Sound Run the internal program by sound 4 Channels controller 2 Key Pressing and Digital Tube Setting 2 1 Operation Panel as Picture 2 shows DOWN ENTER Picture 3 Picture 2 2 2 Instruction on Digital Tube As Picture Three shows it shows in 4 Digits and 8 Segments format 2 3 Function Setting and Display Instruction The fixture has memory function After powered on to enter DMX mode it shows A001 at the first time In the following use the fixture will enter the previous modes directly Press the keys on the operation panel to choose different working modes Hereunder is the details MENU Button ENTER ENTER Tube UP Button DOWN Button Modes Button Button Display Parameter A OOI A 512 A 001 4 512 a DMX address DMX Address Save and Run DMX Mode Axx Modification setting Setting Par 0 Par 4 Par 4 Par 0 Fixture Fixture 2 7 g 000 g 008 g 008 g 000 b 000 b 008 b 008 b 000 u 000 u 008 u 008 u 000 F 000 F 008 F 008 F 000 SP O1 SP 02 SP 02 5P OL 4 Channel Control 4 CH Key P
4. djustment White LED Brightness Adjustment Red LED Brightness Adjustment Green LED Brightness Adjustment Blue LED Brightness Adjustment White LED Brightness Adjustment Red LED Brightness Adjustment Green LED Brightness Adjustment Blue LED Brightness Adjustment White LED Brightness Adjustment DMX512 Description Value Run Internal Program 01 Channel CH3 gt 15 Run Internal Program 02 Channel CH3 gt 15 Run Internal Program 03 Channel CH3 gt 15 Run Internal Program 04 Channel CH3 gt 15 Run Internal Program 05 Channel CH3 gt 15 Run Internal Program 06 Channel CH3 gt 15 Run Internal Program 07 Channel CH3 gt 15 Run Internal Program 08 Channel CH3 gt 15 240 245 Sound Mode 1 Par Red LED Brightness 0 100 O 189 O 209 O 229 O 239 17 9 1 2 2 1 3 000 255 000 015 016 255 000 255 Par 1 Green LED Brightness 0 100 Par 1 Blue LED Brightness 0 100 Par 1WhiteLED Brightness 0 100 000 255 Par 2 Red LED Brightness 0 100 Par 2 Green LED Brightness 0 100 Par 2 Blue LED Brightness 0 100 Par 2 White LED Brightness 0 100 Par 3 Red LED Brightness 0 100 Par 3 Green LED Brightness 0 100 Par 3 Blue LED Brightness 0 100 Par 3 White LED Brightness 0 100 Par 4 Red LED Brightness 0 100 Par 4 Green LED Brightness 0 100 O00 255 Par 4 Blue LED Brightness 0 100 O00 255 Par 4 White LED Brightness 0 1
5. nnel 000 030 DMX Mode CH2 CH3 CH4 CH5 CH6 CH7 031 080 Color Shade CH2 CH3 CH4 CH5 CH6 CH7 081 140 Color Auto Mix CH3 CH1 Mode 171 200 15 colors Auto Switch CH3 201 240 Color Shade Automatically CH3 241 245 Sound Mode 1 8 141 170 RGBW Auto Switch CH3 0 211 Lae 246 255 Sound Mode 2 0007015 All en for 016 255 General Brightness 1 100 Strobe Fade 000 015 No Effect Adjustment 016 255 Strobe fade Speed oe CH4 Red Brightness 000 255 Red Brightness Adjustment 0 100 Adjustment ka i _ Green Brightness 000 255 Green Brightness Adjustment 0 100 ea a Blue Brightness 000 255 Blue Brightness Adjustment 0 100 Dea a NS a White Brightness 000 255 White Brightness Adjustment 0 100 Adjustment VY Instruction on Par Light Set 5 1 Controlled By DMX Controller 5 1 1 Connection AC Power Power line 100 240VAC 50 60Hz DMX512 Controller 4 Channel Controller L 1 g h t Power line L 1 2 h t Power line L 1 2 h E Power line L 1 u h t 1 Par Par 1 2d Par Par 2 3 Par Par3 4 Par Par 4 5 1 2 Channel Listing 3 7 DMX Function Channel Mode Selection 03 Mode Selection 06 Mode Selection 09 Mode Selection 14 Speed Selection Red LED Brightness Adjustment Green LED Brightness Adjustment CH6 Blue LED Brightness Adjustment White LED Brightness Adjustment Red LED Brightness Adjustment Green LED Brightness Adjustment Blue LED Brightness A
6. ress doesn t work in this mode Mode 3 Function Instruction APO1 AP04 AP04 AP01 S 000 5 008 S 008 5 000 r 000 r 008 r 008 r 000 3 1 DMX Mode when the fixture works as a single unit please set Par 0 in the DMX working mode When CH1 255 CH5 1 CH6 2 CH7 3 CH8 4 it will switch to Obey4 control mode directly When the fixtures works as a set please set Par 1 4 and DMX address A001 If the fixture is set to Par 0 or other DMX address the slave units will work out of the way 3 2 Auto Mode There are 4 modes which is APOI APO4 Strobe speed can be set in each mode 3 3 Manual Mode Under this mode RGB brightness and strobe speed can be set manually r 000 r 008 refers to the brightness of red color g 000 g 008 refers to the brightness of green color b 000 b 008 refers to the brightness of blue color u 000 u 008 refers to the brightness of white color Strobe speed setting is the same as 3 2 3 4 Sound Mode Adjust the sound sensitive to the most suitable place and inset two kinds of sound modes 3 5 Temperature Protection Mode Press Menu Button and then Enter Button it will show the temperature of the light panel 4 Single Par Light Usage and DMX Channel Instruction 4 1 DMX Controller Connection DMX512 Controller 1 Fixture AC Power 4 Channel Controller 100 240 VAC Signal Par Par O Signal Par Par 0 50 60Hz 4 2 DMX Channel Instruction DMX Function DMX512 Value Description Cha
7. t the polarity of the DMX signal sl by the 2 See whether the unit is working under DMX mode 2 Set up DMX working mode 3 Check whether there are two masters 3 Select only one master in the loop Light td t pone ee ton Check the light sequence of every par light Correct the light sequence work rightly 1p t Check the thermal IC on the LED panel Change the thermal IC se t show 6 7
8. xture 1 IRDIP 9007426 00D 13 Single Unit 7x10W 4IN1 IRDIP 9028426 00D 13 Light Set 7x1l0W 4IN1 Fixture 2 IRDIP 4016126 00D 13 Single Unit 16x3W RGBW IRDIP 4064126 00D 13 Light Set 16x3W RGBW Fixture 3 IRDIP 2016126 00D 13 Single Unit 16x1W RGBW IRDIP 2064126 00D 13 Light Set 16x1W RGBW Fixture 4 IRDIP 9028444 00D 11 Double Light 7x1l0W 4IN1 For development Fixture 5 IRDIP 4064164 00D 11 XXXI 16x3W RGBW For development Fixture 6 IRDIP 2016124 00D 11 CXX T 16x1W RGBW For development Fixture 7 IRDIP 9012426 00D 13 Epar 12x10W 4IN1 Par Light a Installation E Hanging Or Level Installation Please find the hole in the middle of the bracket and fix the light with the clamp through these holes before hanging You can use hanging cable as assistance Make sure that the hanging cable can bear the weight which is 10 times of the hanging subjects 5 7 Trouble Shooting Checking Item Trouble Shooting 1 Check and see whether the input voltage is the 1 Make sure that the input voltage is the same The unit doesn t same as the rating voltage work 2 Make sure that the working environment is suitable for the unit LED isn t bright i 1 Make sure that the input voltage is the same 1 Check the input voltage enough as the rating voltage as the rating voltage 2 Ensure the working environment The unit is not 1 Check the polarity of the DMX control signal 1 Correc
Download Pdf Manuals
Related Search