Adapter for electrosurgery
Contents
1. 30183 144 Manufacturer ERBE Elektromedizin GmbH Waldhornlestr 17 D 72072 Tubingen Postfach 14 20 D 72004 Tubingen Tel 49 70 71 755 0 Fax 49 70 71 755 179 Email support erbe med de Distributed by USA Territory ERBE USA Inc 2225 Northwest Parkway Marietta GA 30067 Customer Support 800 778 ERBE 3723 Tel 770 955 4400 Email sales erbe usa com 06 08 Printed in Germany ERBE Elektromedizin GmbH 20183 068 Adapter for electrosurgery Important Please read all information carefully These notes on use are not intended as a substitute for the User Manual of the device being used If in doubt read the equipment unit s User Manual or ask an ERBE representative or your distributor for assistance Intended Use This adapter is used to connect various instruments to ERBE electrosurgical generator units Maximum Electrical Capacity Maximum electrical capacity of this adapter with the grip screw turned in is e AkV Safety Instructions WARNING This product may only be used by medical personnel who have been trained per these instructions Before each use check that the product is intact Verify that there are no signs of physical damage If damaged do not use this product Risk of burns If cables with uninsulated plugs are connected to the adapter they carry a current when activating the electrosurgical unit Therefore do not touch the adapter or uninsul2. ated sections of the cable during HF activation Do not use in the presence of combustible or explosive materials Never lay this product on the patient or in his her direct vicinity Protect this product from any form of mechanical damage Do not throw Do not use force ERBE Elektromedizin expressly warns against modifying the product Any modification exempts ERBE Elektromedizin from any and all liability How to Use Clean disinfect this product before using it for the first time and before every subsequent use Connect the adapter to the electrosurgical unit by fully inserting it straight into the corresponding socket of the equipment The stop limit must be clearly felt To remove the adapter pull it straight out of the socket Note Transverse forces may damage the unit s socket Insert the instrument into the adapter as far as possible and fix it in place with the grip screw The adapter can remain attached to the unit after use Cleaning Disinfection This product is not suitable for mechanical cleaning and disinfection The adapter can remain attached to the unit after use and be cleaned and wipe disinfected together with it In this case please follow the same instructions for cleaning and disinfection of the unit in its User Manual It is essential to follow the cleaning agent and disinfectant manufacturers instructions Do not sterilize 82014 008
Download Pdf Manuals
Related Search