SRL-4165说明书 - TianStar.kz
Contents
1. INVOU EA FX150 User Manual INTRODUCTION This fixture can be controlled using DMX is able to operate in stand alone mode has a built in sensor for music triggering and has Master Slave capabilities that enable it to operate in unison with other fixture This very cost effective series is perfect for the club environments Mobile DJs or KTV applications where customers want professional looking effects at lower prices Main Feature 12pcs gobo patterns Gobo rotation DMX 512 4 DMX Channel Automatic Master Slave Sound Activity Master Slave LCD Display SAFETY INFORMATION Please read this user manual before powering or installing the fixture follow the safety precautions listed below and observe all warnings in this manual and printed on the fixture If you have questions about how to operate the fixture safety please contact local distributor for assistance Refer any service operation not described in this manual to a qualified technician Do not modify the fixture or install other than genuine accessories and upgrade kits tis used for the indoor surrounding Do not expose the fixture to rain or moisture Use only a source of AC power that complies with local building and electrical codes and has both overload and ground fault protection Please disconnect the fixture from AC power before removing or installing the lamp changing the fuses or any parts and when not in use Always ground earth the2. Sound triggering Fast mode 245 249 Sound triggering Slow mode 250 255 Sound triggering Standard speed mode Technical information Name Power Fuse Bulb Motor Gobo Cool FX300 AC 220V 50Hz 250V 3 15A ELC 24V 250W 6pcs precision step motor 12pcs gobo patterns Air cool PY 5241787
3. e the clear up window function Manu list A001 001 512 DMX address Setting TESt Test Program Mod Auto Automatic mode Son Sound Activity Mode MH DMX mode SEnS 0 99 Sound sensitivity diSP rEV Reverse display Stnd Standard display e g n Ldi on 6 seconds to clear up window OFF Close the clear up window rESt Reset function DMX Control CH 1 Dimmer amp Shut Value Function 0 Shut 1 4 DMX Mode 5 127 Dimmer Slow Fast 128 190 Automatic program 1 191 249 Automatic program 2 250 255 3 seconds to standard CH 2 GOBO Value Function 0 9 CLOSE 10 19 GOBO1 20 29 GOBO2 30 39 GOBO3 40 49 GOBO4 50 59 GOBO5 60 69 GOBO6 70 79 GOBO7 80 89 GOBO8 90 99 GOBO9 100 109 GOBO10 110 119 GOBO11 120 127 GOBO12 128 183 CW FAST TO SLOW 184 239 CCW SLOWTO FAST 240 244 Sound triggering Fast mode 245 249 Sound triggering Slow mode 250 255 Sound triggering Standard speed mode CH3 GOBO Value Function 0 1 No function 2 127 GOBO Dimmer SLOW TO FAST 128 255 GOBO Shaking SLOW TO FAST CH 4 Prism Motor Rotate Value Function 0 No function 1 63 FAST TO SLOW PY 5241787 64 127 SLOW TO FAST 128 239 Dimmer SLOW TO FAST 240 244
4. ess ENTER button to save the update DMX address code Address code setting range A001 A512 Test program Press Menu button to the Test program and select the manu and press ENTER button to save the setting the LCD display will be flashes Press Menu button to exit this scene Mode setting Press Menu button to manu press ENTER button to save the setting Press UP or DOWN button to select the mode of Auto Sond dMH Press ENTER button to save the setting Press Menu button to the up grade manu Auto automatic mode Sond Sound activity mode MH DMX mode Sound Activity Sensitivity Setting Press Menu button to the manu SEnS SEnS 0 99 selection Press UP or DOWN to select the sound sensitivity Range 0 99 Press ENTER to save the setting If the unit is in the Master slave and Sound mode and without the music triggering it will be black off after 60 seconds Display function setting Press Menu button to the manu press ENTER button to save the setting Press UP or DOWN button to select the mode IrdiS CLdi Press ENTER button to save the setting Press UP or DOWN to select the mode Press ENTER button to save the setting Press Menu button to the up grade manu Simple Sketch rdis rEV reverse display Stnd Standard display PY amp 41787 CLdi on 6 seconds to display clear up window function OFF clos
5. fixture electrically Do not illuminate surface within 0 3 meters 12 inches of the fixture Ensure that the air flow through fans and vents is free and unobstructed Keep all combustible materials for example fabric wood paper at least 0 1Meters 4 Inches away from the fixture Keep flammable materials well away from the fixture Never operate the fixture with missing or damaged lenses and or covers Never attempt to bypass the thermostatic switch or fuses Always replace defective fuses with the ones of the specified type and rating Replace the lamp if it becomes defective or worn out or when average service life is reached When replacing the lamp allow the fixture to cool down for at least 15 minutes before opening the fixture or removing the lamp Never place filters or other materials over the lens or mirror The exterior of the fixture can become hit Allow the fixture cool for at least 5 minutes before handling Do not share directly into the light Never operate the fixture without all lenses and covers installed an unshielded lamp emits UV radiation that can cause burns and eye damage Do not operate the fixture if the ambient temperature Ta exceeds 40 C 104 F Refer all service to a qualified technician Operation Interface BK GOWAN Operation Manual PY 9241787 DMX address set up To press Menu button to Address code setting manu AXxxx Press UP or DOWN button to select the DMX address code Pr
Download Pdf Manuals
Related Search