"user manual"
Contents
1. English 4 Click Login EZ e The System Status page is displayed The display screen will differ according to the projector used gt System Status Node ane SS PA s an f 3 tE e e A s A bz 5 Oo 1 k UW N i Ss n wm tA pa ro 4 5 5 Execute the various settings and adjustments of the projector e For more details please refer to the operating instructions of the projector Memo amp e f Setting Standby mode of the projector is set to Eco the network function is not available when the projector is in standby status e When connected via wireless LAN cut off the power of the projector under web control the projector will enter into standby status the power supply of the wireless module will be cut off and the connection of this software will be cut off Please note that the new connection is unavailable when the projector is in standby status 22 Managing the projector which is connecting cont You can change the setting of the screen location from the projector management screen and adjust or change the settings of the projector E Display the connection status of projector 1 Click the projector management button sa e The information of the accessible projector is displayed a Presenter Light x gm PT LW362 TP PT LE412 G 172281201 E E ______ The model numbe2. MAC address This is the intrinsic ID number that is allocated to each network adapter Every network adapter in the world is given its own number and it is based on this number that data is sent and received between adapters This address is expressed by combining an intrinsic number controlled and allocated by IEEE to each manufacturer with a number which the manufacturer allocates to each of its adapters Protocol This is a common convention or rule required for data communication between computers In order to enable data exchanges between different computers it is necessary to have at both ends the same convention or rule governing such aspects as the timing at which the data is sent and received and the format used for information which is to be sent and received For instance many different kinds of software communicate data over the internet using a protocol called TCP IP Transmission Control Protocol Internet Protocol Abbreviation for Service Set ID The SSID identification code must be set to distinguish equipment included in a wireless LAN that uses access points from equipment not included in that LAN This may appear as the ESSID or the network name for wireless LAN adapters made by some manufacturers This limits the range of the IP addresses assigned to computers in order to divide the network into a number of sections during TCP IP connection The value used to divide the network at this time is called the subn
3. Panasonic Operating Instructions Presenter Light Software Presenter Light Software Thank you for purchasing this Panasonic product Before using this software please read the instructions carefully TQBH0381 E Introduction Software Licensing AgreemMe nl ccceecceeeseseseeeeeeeeeeeseeeeeneeseneeseeeeeeenensenesenegs 3 Request Regarding Security ccccccccseeceeeeeseeeceseeeeeseeneeaeeeeaeeeeeseeeneseenesanensaes 4 Using the Software anssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ennnen nnmnnn 5 Check your computer as ats cies secs ss ceee ee eee 7 Checking the projector geen eens eee ee eee ee eee nee ee ee eer 9 Using the projectors with a wireless LAN Connection cccsccsseeeeeeeeeees 10 Using the projectors with a wired LAN connection cccccsseeeeeeeeeeeeeenees 11 Obtaining the software ccccceecceeeeeeeeeneeeeeeeeeeceeeeeeseaeeeueeeneseneneneseneseneseneaens 12 Operations of Functions Starting the software ss sssnnnsnnnnnrnnnnnrnnnnnrnnennnnnrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn ennen 13 Connecting projector directly and starting projection ccccsscssseeeeeeees 14 Connecting after searching projectors and start projection 0008 16 Stopping projection Restarting projection c ccccseceseeeseeseeeeeeseeesenesenenenes 18 Setting the Capture SIZC cccccceceeeeeeeeeeeeeen
4. in the main menu e The confirmation screen of termination is displayed 2 Click OK button e Disconnect all connections and terminate the software 25 Appendices Network Glossary Word Explanation Access point This is a device which serves as a transmitter and receiver of radio signals when a computer and network are connected using a wireless LAN When a computer is connected to an access point it can communicate through the network connected to the access point Abbreviation for Advanced Encryption Standard The standard prevents the decryption of the encryption keys by continually changing the keys even during communication for greater security Since the hardware performs the encryption processing the access point must also support AES Next generation standard cryptography standardized by the National Institute of Standards and Technology NIST The devices that are used for different network standards from yours Default Gateway enables a connection with other network by adjusting bilateral differences such as communication protocols If no gateway is specified for the IP address of access destination data will be sent to the host set as the default gateway DHCP Abbreviation for Dynamic Host Configuration Protocol This function automatically assigns IP addresses to the connected equipment If a device with the DHCP server function is present within a LAN it automatically assigns IP addresses t
5. is displayed when the file is saved on the desktop gt E Obtaining from Panasonic website 1 Download Presenter Light exe and save it on the computer desktop or some where Memo amp e Download the latest versions of this software from the following website http panasonic biz projector support application index html e Please delete the executable file when this software is not required 12 Operations of Functions Starting the software To start the software and operate the main menu 1 Start this software 0 e Main menu is displayed E Description of each part of the main menu e Button icons in black can be selected and the gray icons cannot be selected e Place the cursor on the button to enlarge the icon and display the function guide e The selected button becomes as larger blue icon E Presenter Light 8 7 1 2 3 4 5 6 1 Projector search button 5 Projector management button Enter the IP address of the projector and connect to the Display and control the status of the connected target projector directly projector Search all the accessible projectors or search with the 6 Connection termination button keywords such as the model No or the IP address of Terminate all the connections the projector and then connect to the target projector 7 Minimize button 2 Start Stop button Minimize the main menu and move to the notification Start Stop the projec
6. location is the full screen display It is disabled when using the other modes of the screen location E The software s colors are not displayed properly and the characters are hard to read e Set the screen colors to 16 bits or more E The button on the task bar disappears e f the main menu is minimized it will be moved to the notification area of the task bar E This software cannot be started e When using the USB Display function this software cannot be started Please start this software after terminating the USB Display E When the Network is unreachable error is displayed e Enter the correct IP address 29 Trademarks e Microsoft Windows Windows Vista and Windows Media are trademarks or registered trademarks of Microsoft Corpora tion in the United States and or other countries e Intel Intel logo and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and or other countries e Other company names product names or other names noted in this manual are trademarks or registered trademarks of the respective companies Note that and marks are not indicated in the text of this manual Notes e Unauthorized use or reproduction of part or all of this product software and manuals is strictly prohibited e Panasonic cannot be held liable for any effects resulting from the use of this product software and manuals e Panasonic reserves the rig
7. options You can change the display language of menu and the image quality of the transferred image E Option settings 1 Click setting button e The basic setting screen is displayed E Description about each part of basic setting a Presenter Light X Basic Setting Language select 1 Jpeg image setting Quality Medium 2 Software Information 3 Version number Presenter Light 0 0 0 6 Publisher c Panasonic Corporation 2015 A 5 6 SS ee ae a ee 1 Language select 4 OK Select the display language English A Aa fi Click OK to apply the new settings and return to the IREX of the menu main menu 2 Jpeg image setting 5 Apply Set the image quality High Medium Low of the Click Apply to apply the new settings transferred Jpeg 6 Cancel 3 Software Information Click Cancel to cancel the new settings and return to Display the version and publisher of this software the main menu 7 Default Return to default settings such as Language select is English Jpeg image setting is Medium Memo amp e The menu will be switched to the selected language instantly at selecting Language select e These settings will be maintained until this software is terminated All the settings will be returned to the default settings such as Language select is English Jpeg image setting is Medium e When Jpeg image setting is set to High t
8. ave been caused by the use of or by trouble occurring in the projector e Panasonic cannot be held liable for damages arising from data corruption or loss as a result of using this projector e The illustrations and screen displays given in this manual may differ from what is actually displayed e In this manual the operations are described basically on the Windows 8 screen e The specifications of this software are subject to change without notice Request Regarding Security When using this product security breaches of the type described below are conceivable e Leakage of your private information via this product e llegal operation of this product by a malicious third party e Harm to or cessation of operation of this product by a malicious third party Take steps to ensure that the projector and computer used are secured and protected e Make sure the password is as hard to guess as possible e Change the password periodically e Panasonic Corporation and its affiliated companies never directly ask customers for their password e Do not give out your password even if directly asked by a third party representing themselves as Panasonic Corporation e Use the product in a network that is kept secure by firewall and other settings e Establish a password for the computer that will be used in order to restrict the users who can log on Security related precautions to be followed when using wireless LAN products The advantage of a wir
9. bility of occur rence of security problems before using any wireless LAN devices be absolutely sure to make all security related set tings according to the instructions given in the operation manuals supplied with them Depending on the specifications of the wireless LAN a malicious third party may be able to break security settings by special means If you cannot perform security settings for your wireless LAN by yourself please contact the Panasonic Support Center Panasonic asks customers to thoroughly understand the risk of using this product without making security settings and recommends that the customer make security settings at their own discretion and responsibility Attention e Wireless LAN connection function of the projector uses radio waves in the 2 4 GHz band e For the details about the wireless LAN connection and the information such as the usage channel of wireless LAN please refer to the Operating Instructions of the projector Using the Software Using this software the displays appearing on the computer screen can easily be projected by using a projector e When using the wireless LAN the wireless module Model No ET WML100 corresponding to this software is required The basic steps to start projecting are described below E Preparations 1 Turn on the power of the projector 2 Connect to the network through a LAN cable when using the wired LAN Insert the wireless module Model No ET WML100 into t
10. bound by warranty for any defects in the Software caused by Licensee s reverse engineering decompiling or disassembly of the Software Furthermore Panasonic or its distributors or dealers will not be responsible for any damage to the Licensee caused by Licensee s reverse engineering decompiling or disassembly of the Software e Article 6 After sales Service If you have a problem with the software please contact the customer support center by telephone Panasonic shall un dertake to notify Licensee of whether the problem is a known error in the program bug or whether the way in which the Software is to be used should be modified Furthermore the Software is subject to revision without prior notice e Article 7 Indemnification Panasonic s liability with respect to this Software is limited to the conditions defined in Article 6 herein Panasonic or any of its distributors or dealers shall not be liable for any damage suffered by Licensee either directly or through claims from a third party arising from or in connection with Licensee s use of the Software Furthermore Panasonic Corporation does not guarantee the successful operation of the software unless it is used with any of Panasonic projectors e Article 8 Export Control Licensee agrees not to export or re export the Software to any county other than the country of purchase of the projector in any form without the appropriate export licenses under the regulations of the countr
11. ckground because the priority is given to the new setting 3 Click OK e The screen location is switched e Please note that the screen location that has been occupied by the other computer will be forcibly switched E The connected projector under web control You can change or adjust the settings of the target projector 1 Click the icon T of the target projector in the Device management list e The web connection screen Network Display System screen of the projector is displayed e Please refer to The connected projector under web control i page 21 Network Display System 24 Disconnecting projector connection You can disconnect the projector or terminate the software E Disconnecting single connection 1 Click the projector management button amp e The information about all accessible projectors is displayed gt PT LWIS62 ge PT LB412 yr 17228120 2 Click the icon 3 of the relevant projector that you want to disconnect in the list e The confirmation screen of the connected termination is displayed 3 Click OK button e Disconnect the selected projector connection E Disconnecting all connections 1 Click the connection terminating button in the main menu e The confirmation screen of the connected termination is displayed 2 Click OK button e Disconnect all connections E Disconnecting all connections and terminating the software 1 Click the icon X
12. e new setting e When the computer is connected to multiple projectors if one of the projectors is disconnected with external factors e g disconnecting the LAN cable removing the wireless module all of the other connections will be canceled 15 Connecting after searching projectors and start projection Search for the projector which you want to connect by using the search function E Search all the projectors that can be connected 1 When the search field is blank click Search button Presenter Light e The timer gauge is displayed during searching procedure and then the model No and icon of the projector that can be connected are displayed in the Search result field e The projectors which are in the same domain as the computer can be searched Presenter Light O ary PT LiW 362 PT LE4 12 E Search the projector that can be connected by using the keyword 1 Enter the keyword in the search field e The searching function can be achieved by using a keyword that is partially correspond with the character string e You can enter the part of the IP address or the projector model No as a keyword e Since there are uppercase and lowercase letters distinction please enter uppercase letters when entering the model no of the projector Presenter Light 2 Click Search button 16 Connecting after searching projectors and start projection cont e The timer gauge is displayed during searching procedu
13. ectors which can be connected by IP address or model No select the target projector enter the login password on the confirmation screen to connect to the projector and then start projection e The computer screen will be projected from the projector gt Connecting after searching projectors and start projection page 16 Memo amp e This software and the USB Display function cannot be used at the same time Before using this software disconnect the USB cable to terminate the USB Display function Using the Software cont E Possible with this product lt Multi style gt The screen location can be switched among seven modes Screen location full screen left side right side upper left up per right lower left lower right It is also possible to display up to four computer presentations simultaneously ial s GROUP A NETWORK BOAR rowr o lt WEB control gt It is possible to control the projector using the computer s web browser Check your computer E Necessary environment for computers to be connected e First check your computer to see whether or not it has a wired LAN or a built in wireless LAN function e Before connecting the projector to the computer be sure to check the following settings e Operation is not guaranteed for all wireless LAN adapters and built in wireless LAN adapters E Wireless LAN Check 1 Wireless LAN settings e Is your wireless LAN adapter properly
14. ed screen location is displayed in blue color in the selection filed e The gray part of the icons means the background area Change Screen Location Selected screen location e The icons in the selection field are as followings The full screen changes to the background B Background Background the computer image will not be displayed It will display the image that is projected before using this software The computer screen is projected while preserving original One screen ratio using all of either horizontal or vertical panel pixels with audio the factory default Projects the computer image that is displayed on the left side 2 split screen or the right side while preserving original ratio using all of either horizontal or vertical panel pixels of the area Projects the computer image that is displayed on upper left l upper right lower left or lower right while preserving original SPUL SCIREN FH H EH Hi HH HH HH HH ratio using all of either horizontal or vertical panel pixels of the area 2 Select the screen location e The icon that is on the right side of Change Screen Location is switched The icon is displayed in blue e When multiple computers are connected and some screen locations are already occupied by the other computers if you select the same area or select a different category between the 2 split screen display and the 4 split screen display the already occupied screen location will be changed to the ba
15. eeeeeeneseneseneseneseneseneceneeenesenesenseaaes 19 Setting th Options ninanais ee eee eee 20 Managing the projector which is connecting sssssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 21 Disconnecting projector cConnection sssssssssesssnnsnnnnnrnnnnnnnnnnnnnnnnnnnnnnnnn nnne 25 Appendices NetWork ol 7 a cnan a E E aa e tere eee 26 Frequently Asked Questions cccccsccceseeeeeeeeeeeeeeeeeeeaeseeseaeeeseneseaneesenaesaenees 27 Tadema S aaa EAEE tie E AE 30 introduction Software Licensing Agreement Use of this Software is governed by the terms defined in this Software Licensing Agreement e Article 1 License The users obtain the license of the software i e the information recorded or contained in CD ROM operating instructions or others but the copyright or intellectual property right of the software does not transfer to the users e Article 2 Use by a Third Party Licensee may not transfer or allow any third party to use or copy the Software whether free of charge or not e Article 3 Restrictions on Copying the Software Licensee may make a single copy of the Software in whole or in part solely for backup purposes e Article 4 Computer Licensee may install and use the Software on more than one computer owned or managed by Licensee e Article 5 Reverse Engineering Decompiling or Disassembly Licensee may not reverse engineer decompile or disassemble the Software Panasonic shall not be
16. eless LAN is that information can be exchanged between a computer or other such equipment and an access point using radio waves as long as you are within range for radio transmissions On the other hand because the radio waves can travel through obstacles such as walls and are available everywhere within a given range problems of the type listed below may occur if security related settings are not made e Intercept communication content A malicious third party may intentionally intercept and monitor transmitted data personal information such as your ID password and or credit card numbers content of e mail e Improper invasion A malicious third party may access your personal or corporate network without authorization and engage in the follow ing types of behavior Retrieve personal and or secret information information leak Spread false information by impersonating a particular person spoofing Overwrite intercepted communications and issue false data tampering Spread harmful software such as a computer virus and crash your data and or system system crash Since most wireless LAN adapters or access points are equipped with security features to take care of these problems you can reduce the possibility of these problems occurring when using this product by making the appropriate security settings for the wireless LAN device Some wireless LAN devices may not be set for security immediately after purchase To decrease the possi
17. environments the connection may be established via IEEE802 11b depending on the location radio signal conditions distance or other factors E The status of the target projector is indicated with 2 icon in the Projector management list and the computer image cannot be projected e This software has been licensed by Windows firewall Take the following steps that correspond to the operating system used Windows Vista Is this software registered on the Exceptions tab of Allow a program through Windows Firewall Register this software in the Exceptions to Application List of the firewall lt How to register gt Click Start Control Panel Click the Security tab when the lt Control Panel gt window opens Click Allow a program through Windows Firewall Click Continue in User Account Control Click the Exceptions tab and then Add program when the lt Windows Firewall Settings gt window opens Click Browse when the lt Add program gt window opens Select Presenter Light exe that has been saved and click OK Confirm that this software has been added in the Program or port field Double click Presenter Light exe and open the lt Edit a Program gt window Click the Change scope button at the lower left of the window 0 When the lt Change scope gt window opens select the desired network as described below Select Any computer including those on the In
18. et mask Wireless LAN This is a network which uses signals to communicate wirelessly It obviates the need for a LAN cable connection since the data is sent and received using a common wireless frequency SSID or WEP can be used to ensure that the transfer of information remains secure WPA PSK This is a standard covering encryption methods used in wireless LAN WPA2 PSK It provides greater security than WEP Wired Equivalent Privacy and has functions such as a user authentication function and also TKIP encryption protocol which automatically changes the encryption key at fixed intervals And this authentication requires no authentication server 26 Frequently Asked Questions e Has the software been started up This software must be started in the computer in order to enable wireless transmissions of images to the projector e Have the correct network settings been established Check whether the correct network settings have been established for the projector and for the computer e Have the projector been powered on When the projector is in standby status the wireless module is not supplied the power and the wireless connection is disabled e Have the wireless module been attached to the projector E When the Cannot find LAN adapter error is displayed e Is the wireless LAN adapter effective If the wireless LAN adapter is disabled enable it For some PCs with an internal wireless LAN the hardware switch o
19. g DNS server addresses Preferred DNS server Alternate DNS server Validate settings upon exit amp Memo amp e Before setting the computer s network settings check them with the network administrator 11 Obtaining the software This software is provided in the firmware of some projectors of Panasonic You can obtain it from web by accessing to the corresponding projector or from Panasonic website directly E Obtaining from web by accessing to the corresponding projector e Firstly power on the projector and check the IP address and then connect the computer to the projector via the wired LAN or the wireless LAN 1 Activate the Web browser in the personal computer 2 Enter the IP address set by the projector into the URL input field of the web browser e The Network Display System screen is displayed Network Display System 3 Click Download e The download screen of Presenter Light is displayed Network Display System gt Download 4 Click Download e The download confirmation screen of the executable file Presenter Light exe is displayed 5 Save Presenter Light exe on the computer desktop e This software is used as the executable file format You cannot install it in the computer e Execute this file when using the software Please save this software in the convenient place or make a shortcut for convenient use e The following icon
20. gin password of the target projector set the screen location and then click OK button e Connect the selected projector e When the connection is normally established the arrow or antenna of the projector icon will be changed from gray color to red color E Connect all of projectors in the searching list 1 Puta check in Select all e All the projectors are selected when put a check in Select all 2 Click Connect directly button e The connection confirmation screen is displayed on which is displayed the IP address of every projector 3 Enter the login password of the target projector set the screen location and then click OK button e Connect the selected projector the next connection confirmation screen of the projector will be displayed 4 Return the step 3 e Up to 16 projectors can be connected with a computer in total with the wired LAN and the wireless LAN If the num ber of the target projectors exceeds 16 the Max Session Number is exceeded will be displayed e When the connection is normally established the arrow or antenna of the projector icon will be changed from gray color to red color e When selecting the screen position of the second and subsequent if the different screen position category full screen 2 split screen 4 split screen is selected Display mode is conflicted with others will be displayed and the connection will fail Memo amp e When newly connecting your computer to the pro
21. gt window Click the Change settings to change to the allow registration mode Click the Allow another app select Presenter Light exe and click the Add Confirm that this software has been added to the Allowed programs and features list Confirm that the Private and Public checkboxes are checked 7 Click the OK button in the lt Allowed apps gt window This software is registered as an application on the Windows firewall exception list Ook WN E Image display is slow or animation is not displayed smoothly e Is the computer CPU speed slow Displaying images and playing animations depend to a large extent on the performance of the computer s CPU e Adverse effects may be exerted if there is any wireless communication in the vicinity e The speed may be slower when any other applications are running concurrently 28 Frequently Asked Questions cont E There is a time lag between operations at the computer and results in the projected image e This software reads the screen compresses the data and transmits it to the projector In the projector the received data are extracted and then projected Some delays occur in this system due to the processing time and factors in the wire less environment Different computers may also produce varying lag times E No sound of the computer is heard from the projector during projection e The sound of the computer can be output when the setting of the screen
22. he projector when using the wireless LAN e For more information about the projector which is compatible with the wireless module please visit the following web site http panasonic net avc projector products optional_ accessories 3 Press the lt MEMORY VIEWER USB DISPLAY NETWORK gt button on the remote control to switch to network input e Press the lt INPUT ENTER gt button on the control panel and the input source screen is displayed then press Aw to select Network 4 Check the login password and IP address of the projector which are displayed in the idle screen t Checking the projector page 9 5 Check the SSID in the Expand Network screen when using the wireless LAN i Using the projectors with a wireless LAN connection page 10 6 Select the same SSID with the projector on the computer network connection screen and connect to the wireless LAN when using the wireless LAN i Using the projectors with a wireless LAN connection page 10 Access the compatible projector by the web browser download the software and then save it on the computer i Obtaining the software page 12 E Starting the Software 8 Start the software i Starting the software page 13 E Projection O Enter the IP address and the login password on the confirmation screen to connect to the projector and then start projection rt Connecting projector directly and starting projection page 14 OR Search the proj
23. he speed at which the projected images are displayed may be slower since priority is given to the picture quality 20 Managing the projector which is connecting You can get more information of the screen location from the searching list and adjust or change the settings of the projector E Check the screen location of the projector in the searching list 1 Click the connected projector icon e The IP address and the screen location icon of the computer are displayed in the field Status on gt gt gt gt gt amp 2k The projector IP address is displayed e The Access via webpage button is available at the same time Presenter Light x IP address of the projector OTS ome y m amp E The connected projector under web control 1 Click the connected projector icon e The icon of the screen location in Status on gt gt column and the IP address of the computer are displayed _ a m ditwr As E i E i L Lo a lt T PT LE412 Access via webpage ee rc ce a TM 21 Managing the projector which is connecting cont 2 Click Access via webpage e The web connection screen Network Display System screen of the projector is displayed Network Display System 3 Click Login and enter the password in the Password column e The factory default setting of the user name is admin fixed and the password is admin
24. ht to revise this product software specifications and manual contents without notice Panasonic Corporation Web Site http panasonic net avc projector Panasonic Corporation 2015 W0715HZO ST
25. jector that is already connected to the other computer press the lt MEMORY VIEWER USB DISPLAY NETWORK button on the remote control to display the network idle screen and find out the login password In addition press the lt MENU gt button twice to cancel the network idle screen 17 Stopping projection Restarting projection You can stop or restart the projection with this menu operation The main menu at projecting eq Presenter Light 7 soa ial Qi Om Fs 2 E Stopping the projection 1 Click Stop button on the main menu e The projection screen will change to blue back the sound will disappear and the button Stop button will change to the Start button E Restarting the projection 1 Click Start button on the main menu e The button Start button will change to the Stop button and the image and sound are transferred in real time Memo amp e At the time that the computer screen is projected the resolution of the computer may be forcibly changed depending on the combination of computer and projector e The sound can be output from the projector that the full screen display is selected with setting the screen location e The image is converted to JPEG format during transferring The image quality of JPEG can be changed in Setting Jpeg image setting 18 Setting the capture size The content that you want to pay attention to can be enlarged to display during projection by
26. less module Model No ET WML100 into the lt USB A VIEWER WIRELESS gt terminal of the projector when connecting via wireless LAN e Please use the projector which is compatible with the wireless module e For more information about those projectors which are compatible with this product please visit the following web site http panasonic net avc projector products optional_ accessories E Setting the input 1 Press the lt MEMORY VIEWER USB DISPLAY NETWORK gt button on the remote control to switch to network input e The idle screen is displayed in the projected image of the projector e The login password a four digit number that is automatically generated projector name PROJECTOR fixed IP address Wireless LAN and IP address Wired LAN will be displayed in the idle screen e Press the lt INPUT ENTER gt button on the control panel and the input source screen is displayed then press Aw to select Network Network input idle screen e LOGIN PASSWORD e PROJECTOR NAME e IP ADDRESS WIRELESS LAN e IP ADDRESS WIRED LAN E Checking the projector Check the login password and IP address Wireless LAN Wired LAN of the projector E Checking the network information The network setting information can be checked in the projector menu e Press the lt MENU gt button of the projector and check the network information from the Expand menu gt Network Network information e SSID and Wireless IP
27. nd Printer Sharing for Microsoft Networks et ered Dent mm Na Wafa a DADE Click the Networking tab In This connection uses the following items click Internet Protocol Version 4 TCP IPv4 and click Properties ad Intemet Protocol Version 4 TCP IPv4 ic 4 Link Layer Topology Discovery Responder Windows Vista Windows 7 l tra Uninstal Click Start Control Panel Network and Internet Network and Sharing Description ss Center Change adapter settings herp palsies ny Right click the connection to be changed and click Properties Et TRI Click the Networking tab In This connection uses the following items click Internet Protocol Version 4 xi TCP IPv4 and click Properties 3 Set the computer s network in line with the projector settings Click Use the following IP address and input the values in the IP address Subnet mask and Default gateway boxes e Before setting the computer s network settings check them with the network administrator When connecting to a projector whose network settings are the factory settings IP address 192 168 1 101 Default gateway 192 168 1 1 Obtain an IP address automatically 192 168 1 101 255 255 255 0 Default gateway 192 168 1 1 Obtain DNS server address automatically Use the followin
28. o the connected equipment Encryption This refers to converting data into a form which is not understandable to other people Decisions are made in advance on the rules algorithms and keys network keys for converting the data between the sender and receiver and the data converted encrypted by the sender is restored to its original form decrypted by the receiver Important exchanges can be made without their being read by other parties This is a security system designed to protect computers from unauthorized access via a network such as the internet Unauthorized access is prevented by restricting the data exchanged between the network and computer and allowing only authorized data to pass through to the computer This device brings together cables of the same type in order to relay information USB hubs and network hubs are examples Default Gateway IP address Internet Protocol IP is a protocol for distributing data and the address corresponding to the data distribution destination is called the IP address The same IP address cannot be used within the same LAN ee for Local Area Network This is a network with a relatively narrow range such as inside a Logoff This action clears the status logon in which it is possible to access a network or computer system It is also called logout Logon This action establishes the status in which a network or computer system can be accessed It is also called login
29. r or the IP address of the projector is displayed on the right of the projector icon The connection is established and the image sound can be transferred only display The connection is failed and the image sound cannot be transferred only display This software may be blocked with the Windows firewall FAQ i page 28 E The sound can be output from the projector when the selected screen location is i only display The sound cannot be output from the projector when the selected screen location is except for i only display The setting status of the screen location The icon varies according to the selected screen location Click this icon to change the settings Click this icon to cut off each connection Click this icon to control the projector via web Please refer to The connected projector under web control i page 21 23 Managing the projector which is connecting cont E Switching the screen location Click the screen location icon _ The icon varies depending on the selection status of the projector that you want to connect in the Projector Management list then select whether to display the computer screen in any screen location 1 Click the screen location icon La of the target projector in the Projector Management list e The Select Screen Location screen is displayed e The icon of the selected screen location of the using computer is displayed in yellow color and the unselect
30. r the software setting might have turned off the wire less LAN If it is turned OFF turn it ON before start this software In the case of a computer which also uses Bluetooth Bluetooth may take priority so switch the priority to wireless LAN Refer to the operation manual of your PC for information about switching on off e Is your wireless LAN adapter properly recognized on the network Sometimes wireless LAN adapters are not correctly recognized by the computer Check in Device Manager whether the adapter is recognized correctly If the Network Adapter is indicated with in Device Manager wireless LAN adapter installation is not complete See the User s Manual of your wireless LAN adapter and re install the driver lt To display Device Manager gt Windows Vista Click Start Control Panel System and Maintenance System This will bring up View basic information about your computer Click Device Manager Windows 7 Click Start Control Panel System and Security System This will bring up View basic information about your computer Click Device Manager Windows 8 Windows 8 1 Press X while holding down the Windows logo key on the keyboard and select Control Panel System and Security System This will bring up View basic information about your computer Click Device Manager E The wireless LAN connection is interrupted suddenly e The pictu
31. re and then the model No and the icon of the projector that can be connected are displayed in the Search result field e The projectors which are in the same domain as the computer can be searched e When the search result is one projector the connection confirmation screen is displayed Please click OK button to connect E Descriptions of the searching list The model No of the projector and the icon are displayed in the search result The different type of icons are as following Pp lon Description S This is the projector which can be accessed via wired LAN and it is not connected to any other computers gray arrow This is the projector which can be accessed via wired LAN and it is connected to your computer or other computers red arrow This is the projector which can be accessed via wireless LAN and it is not connected to any other computers gray antenna This is the projector which can be accessed via wireless LAN and it is connected to your computer or other computers red antenna E Select the projector which is to be accessed in the searching list and then connect it 1 Put a check in the target projector e The Connect directly button becomes available e f the projector that is already connected with the computer is unchecked the connection will be canceled 2 Click Connect directly button e The connection confirmation screen is displayed on which is displayed the IP address 3 Enter the lo
32. re may be disappeared or frozen by the radio wave environment In such cases please try the following mea sures Please make the wireless LAN connection device close to the projector that is attached to the wireless module Place away from the devices that can emit electromagnetic radiation such as microwave ovens game machines Do not use these devices if you are still unable to solve the problem If multiple wireless devices are connected with the same router the bandwidth will be insufficient Please cut off the power supply of the devices that are unused or do not use the other devices as much as possible Please prevent from using the projector in a location prone to static electricity such as on a carpet E The wireless LAN or the wired LAN connection is cut off If projection has been suspended or communication has been cut off select the projector again on the projector search ing list If it is still not possible to communicate with the projector turn off the power of the projector wait until the projec tor has cooled down and then disconnect the power cable Turn the power back on and then select the projector again from the software 2 Frequently Asked Questions cont E The connection cannot be established with IEEE802 11g IEEE802 11n e In environments with wireless LAN adapters that support both IEEE802 11b and IEEE802 11g the connection may be established via IEEE802 11b e In some operating
33. recognized e Is the wireless LAN adapter switched on e Install the wireless LAN adapter driver beforehand For details on how to install the driver refer to the instructions accompanying the wireless LAN adapter Check 2 Computer s settings e When security firewall software and utilities for wireless LAN adapter are installed these may prevent connection of the projector e Has the firewall for blocking unsolicited programs been turned off or shut down i Frequently Asked Questions page 28 E Wired LAN Check 1 For wired LAN e Is the cable properly connected e The specifications for cables vary depending on the system configurations Confirm the projector settings and the cable specification Check 2 Wired LAN settings e Is your wired LAN adapter properly recognized e Is your wired LAN adapter switched on e Install the wired LAN adapter driver beforehand For details on how to install the driver refer to the instructions accompanying the wired LAN adapter Check 3 Computer s settings e When security firewall software is installed it may prevent connection of the projector e Has the firewall for blocking unsolicited programs been turned off or shut down 1 Frequently Asked Questions page 28 Check your computer cont E Installing the software To use this software the computer must satisfy the following requirements OS Microsoft Windows Vista 32 bit Microsoft Windows 7 32 64 bit Microsoft Window
34. s 8 32 64 bit Microsoft Windows 8 1 32 64 bit WEB browser Internet Explorer 7 0 8 0 9 0 10 0 11 0 CPU Intel Core 2 Duo 2 0 GHz or higher processor or compatible processor installed Intel Core i5 or higher recommended for projection Memory 2 GB or more Hard disk At least 20 MB free space LAN environment For connection with a wired LAN LAN connector 10BASE T or 100BASE TX required For connection with a wireless LAN Wireless LAN adapter IEEE802 11b g n standard compliance required Desktop area 640 dots x 480 dots or more 1 600 dots x 1 200 dots or less Memo amp e Note that operation is not guaranteed when used with system environments other than the above or on homemade computers e t may not be possible to use some of the functions of a computer if it is using a wireless WAN wireless wide area network e When connecting under the IEEE802 11n standard the wireless LAN adapter projector and access point used must all support the 11n standard e f the computer has a switchable graphics function and the function is to be switched remember to stop projection before switching the function Operation is not guaranteed for all computers that meet the above conditions Checking the projector Memo amp e The illustrations and screens in this document may differ from the actual ones E Powering up the projector Turn on the power of the projector E Installing the wireless module Insert the wire
35. ternet 11 Click OK 12 Click OK in the lt Edit a Program gt window 13 Click OK in the lt Windows Firewall gt window This software is registered as an application on the Windows firewall exception list OoaR WN gt O N Windows 7 Is this software registered in Allow a program through Windows Firewall lt How to register gt Click Start Control Panel Click System and Security when the lt Control Panel gt window opens Click Allow a program through Windows Firewall in the lt System and Security gt window Click the Change settings to change to the allow registration mode Click the Allow another program select Presenter Light exe and click the Add Confirm that this software has been added to the Allowed programs and features list Confirm that the Home Work Private and Public checkboxes are checked 7 Click the OK button in the lt Allow programs to communicate through Windows Firewall gt window This software is registered as an application on the Windows firewall exception list OorWN Windows 8 Windows 8 1 Is this software registered in All an app through Windows Firewall lt How to register gt Press X while holding down the Windows logo key on the keyboard and click Control Panel Click System and Security when the lt Control Panel gt window opens Click All an app through Windows Firewall in the lt System and Security
36. that has been set in the projector e For detail about the setting change of SSID refer to Web control function in the operating instructions of the projector amp Memo amp e f the network cannot be found please check the Operating Instructions of the wireless LAN adapter 10 Using the projectors with a wired LAN connection Connect the projectors and computer using a wired LAN e Before proceeding turn on the projector and verify the IP address E Projector settings 1 Select the network settings of the projector On the menu screen select Expand Network Set the network Select the Network setting page from the web connection Project displ screen set LAN settings eh mdada ae A LAN Factory settings IP address 192 168 1 100 IP address 192 168 Subnet 265 255 255 0 Gateway 192 168 1 1 DNS 192 168 1 1 Default gateway 192 168 1 1 E Computer settings ENTER Next MENU Back 2 Change the TCP IP setting Windows 8 Windows 8 1 Networking Press X while holding down the Windows logo key on the keyboard and select Connect using Control Panel Network and Internet Network and Sharing Center Intel R 82579LM Gigabit Network Connection Change adapter settings Right click the connection to be changed and click Properties bananana v 0 Client for Microsoft Networks E QoS Packet Scheduler B File a
37. tion of the computer image area of the task bar with the icon EEP This button becomes to during projection If the icon on the notification area is double clicked the 3 Image size setting button main menu will be returned to the original position Set the computer image in full screen projection or 8 Exit button partially capture projection Exit this software 4 Setting button Execute the setting of each option 13 Connecting projector directly and starting projection You can select the projectors from the menu and then connect the computer to them e Firstly power on the projector The connection cannot be established when the projector is in standby status E Connect the projector directly through the designated IP address 1 Click the projector search button Q e Connect Search screen is displayed am 1 Connect button 2 Search button Click this button to connect the projector Click this button to search the projectors which can be accessed V page 16 2 Enter the IP address in the connection column a Presenter Light 3 Click Connect button e The connection confirmation screen is displayed e When the IP address is designated it is able to connect even though the projector and the computer are in different domain 1 Password 3 Background Enter the password that is displayed in the idle screen Check this item the computer screen is not displayed of the target projec
38. tor and the projector image will not be changed 2 Select Screen Location Without checking this item the computer screen will be Select the screen location among full screen display displayed according to the screen location setting All 2 split screen L R or 4 split screen 1 2 3 4 4 OK Cancel The selected screen location becomes green Select to confirm cancel the settings The yellow screen location is already assigned to other computers it also can be selected After selecting the origin computer screen is switched to the using computer screen 14 Connecting projector directly and starting projection cont 4 Enter the login password and set the screen location 5 Click OK button e After the connection is established the projection starts e The start button oO changes to the stop button 1 during projecting e f the screen location has not been set in step 4 it will be set to full screen All automatically a Presenter Light X amp Memo amp e The screen location can be switched in the projector management menu i page 24 e When multiple computers are connected and some screen locations are already occupied by the other comput ers if you select the same area or select a different category between the 2 split screen display and the 4 split screen display the already occupied screen location will be changed to the background because the priority is given to th
39. using the capture function E Setting the capture size 1 Click the screen size setting button 4 e The selection screen is displayed o FullScreen 10 21 80 125 Alterable Description Projects the entire computer image within the screen area of Screen location while preserving Original ratio using all of either horizontal or vertical panel pixels of Screen location Projects the partially captured image of the computer image within the screen area of Screen Alterable location while preserving original ratio using all of either horizontal or vertical panel pixels of Screen location E When setting Alterable 1 Select Alterable e The capture area is displayed in a frame on the computer screen LRABLALAARAEBLEABERRRLERREL ELE LE EBABRERERAEBEABREBEAZEEAS ESE sos vawwnnnnewannwennnnne ennnennnnn een a N N N 4 N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N A ROE WE EE EE SE EEE EE T L EE EE RE 2 Adjust the area that you want to display by using the mouse to drag eight blue dots that are displayed on the frame e Projects the captured area that is transferred to the projector within the screen area of Screen location while pre serving original ratio using all of either horizontal or vertical panel pixels of Screen location Memo amp e The minimum size that can be captured is 16 x 16 pixel 19 Setting the
40. will be displayed when using the wireless LAN and inserting the wireless module to the projector e When using the wireless LAN in addition to checking the above mentioned items in Checking the projector please check SSID in Network information Projector menu display Network information Color adjust MAC address 00 04 A3 97 68 A4 f IP address 192 168 1 100 Setting SSID NetworkDisplay Wireless IP 172 28 120 1 Gy ENTER Select MENU Back Using the projectors with a wireless LAN connection Connect the projectors and computer using a wireless LAN e Only one projector can be connected with a computer via the wireless LAN E Checking the setting information while attaching the wireless module 1 Insert the wireless module Model No ET WML100 into the projector 2 Check SSID in Expand Network when the menu screen is displayed 3 Switch the input to Network and check the login password and IP address in the idle screen e The settings of the wireless module are as follows Channel IP address 172 28 120 1 Gateway 0 0 0 0 E Computer settings 4 Set the computer s network settings to match with the settings of the projector e Before setting the computer s network settings check them with the network administrator 5 Connect to the network that has been set in the projector e Click on the task tray bottom right of the Windows screen then select the same name as SSID
41. y where Licensee resides or of any other country as may be required by such export or re export E Software information regarding this product This product incorporates the following software 1 The software which is developed independently by or for Panasonic Corporation 2 The software owned by third party and licensed to Panasonic Corporation 3 The software which is licensed under the GNU GENERAL PUBLIC LICENSE Version2 0 GPL V2 0 4 The software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version2 1 LGPL V2 1 5 Open source software which is not licensed under the GPL V2 0 and LGPL V2 1 The software categorized as 3 5 the license is available in accordance with gnu general public license and gnu lesser general public license respectively it is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose As for the terms and conditions please refer to the software license of the supplied CD ROM If you wish to ask any questions as to the software please contact Sav pj gpl pavc ml jp panasonic com by email Presenter Light uses the following software programs A portion of this software is based in part on the work of the Independent JPEG Group Please note the following e Panasonic Corporation hereby disclaims all liability for any damages or losses whether suffered directly or indirectly which h
Download Pdf Manuals
Related Search