USER MANUAL - Argos Support
Contents
1. HOOVER USER MANUAL A INSTRUCTIONS FOR SAFE USE This appliance should only be used for domestic cleaning as described in this user guide Please ensure that this guide is fully understood before operating the appliance Do not leave the appliance plugged in Always switch off and remove the plug from the socket after use or before cleaning the appliance or any maintenance task This appliance can be used by persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Keep the appliance out of reach of children when it is energized or cooling down The appliance is not to be used if it has been dropped if there are visible signs of damage or if it is leaking If the power cord is damaged stop using the appliance immediately To avoid a safety hazard an authorised Hoover service engineer must replace the power cord This appliance must be earthed The appliance shall not be left unattended while it is connected to the supply mains Do not use your appliance out of doors Use only attachments consumables or spares recommended or supplied by Hoover Do not use the appliance to clean or direct steam towards animals people or plants Liquid or steam must not be directed towards eq2. intensity setting depends on the current steaming task Rotate the Steam Control Dial for desired steam intensity 5 After a few seconds Power Light stops blinking indicating the cleaner is ready for use 6 To produce steam press Steam Trigger Button Handheld NOTE In order to significantly reduce mineral build up and prolong the life of your steam mop the use of distilled or de mineralized water in the unit is highly recommended IMPORTANT Always unplug the cleaner when removing the Floor Head or handle Always ensure the cleaner has fully cooled down before removing the Floor Head ACCESSORIES Without hose 1 After removing the Floor Head Attach Conic Tool to Steam nozzle of main body 2 Fit other small accessories to Conic Tool and secure With hose 1 Fitthe Hose to Steam nozzle of main body 2 Attach Conic Tool to the nozzle on the hose 3 Fit other small accessories to Conic Tool Window Squeegee and Utility Head 12 The Window squeegee is to be installed on the Utility Head before installing on the Steam nozzle of main body and is used for cleaning windows mirrors and other smooth glass surfaces Fit Small Cloth on Utility Head before putting Window Squeegee on The Utility Head with Small Cloth is to be used for removing wrinkles from different fabrics Choose the steam intensity setting appropriate for the fabric you are steaming Comb Brush Ideal for cleaning all grout lines sanded or not sanded Conic Tool Use
3. on heavily soiled areas such as showers kitchens Round Brush Use on stubborn grease and grime Metal Brush For oven grills and racks CLEANER MAINTENANCE IMPORTANT ALWAYS ENSURE THE CLEANER HAS FULLY COOLED DOWN BEFORE PERFORMING ANY MAINTENANCE TASKS Empty the Water Tank 1 Unplug the cleaner from the mains power and ensure the unit has cooled 2 Remove the water tank cap pull off directly 3 Empty any excess water from the tank Replace the water tank cap Removing and cleaning the Textile Pad 1 Unplug the cleaner from the mains power and ensure the unit has cooled 2 If necessary remove the Carpet Glider then peel the Textile Pad from the Floor Base 3 Wash the Textile Pad in a washing machine with a mild detergent at max temperature 40 C IMPORTANT Do not use bleach or fabric softener when washing the Textile Pad Cleaning the blockage Unplug the cleaner from the mains power and ensure the unit has cooled Ensure the water tank is empty Detach floor nozzle from cleaner body Insert supplied de scaling tool into steam outlet to clear any blockages Re assemble floor nozzle to the appliance body TROUBLE SHOOTING Should you have a problem with the product complete this simple user checklist before calling your local Hoover service PAN The steam stick will not switch on e Check the unit is plugged in e Check the power cord The steam stick is not producing steam There may be no water in th
4. e any loose dirt or debris IMPORTANT Do not use the cleaner without a Textile Pad attached to the Floor Head 1 Attach the Carpet Glider to the Floor Head 4 2 Plug the steam cleaner into the mains power Turn Steam Control Dial clockwise from OFF to MAX Power light will blink The desired steam intensity setting depends on the current steaming task Rotate the Steam Control Dial for desired steam intensity After a few seconds Power Light stops blinking indicating the cleaner is ready for use 4 Recline the cleaner by placing a foot on the Floor Head and lowering the main body towards the floor 8 5 Move the cleaner slowly backwards and forwards paying particular attention to high traffic areas wo METHODS OF USE FOR HANDHELD STEAM CLEANER 1 Make sure Steam Control Dial is set to OFF position 2 Rotate Water Tank Cap one quarter turn in Unlock direction anti clockwise indicated by illustration on Cap and remove 3 Carefully fill Water Cup with water and pour into Water Tank through the fill hole Do not add any chemicals detergents or perfumes to the clean Water Tank 6 NOTE In order to significantly reduce mineral build up and prolong the life of your steam mop the use of distilled or de mineralized water in the unit is highly recommended 4 Plug the steam cleaner into the mains power Turn Steam Control Dial clockwise from OFF to MAX Power light will blink The desired steam
5. e clean water tank You may not wait for enough time when switch on You may not turn Steam Control Dial from OFF to a desired steam rate position Steam output is weak or intermittent e Steam Control Dial is set too LOW Turn Steam Control Dial to a desired steam rate position e Mineral build up in unit Refer to Cleaning the blockage section The Textile Pad won t pick up dirt e The cleaning pad may already be saturated with dirt and needs to be washed Refer to the Maintenance section CLEANING FAQS When is Steamjet ready In approximately 30 seconds Can I use Steamjet on all floor surfaces On all hard floors like marble ceramic stone linoleum sealed hardwood floors and parquet Does Steamjet emit steam automatically Yes for stick No for handheld to produce steam you should press Steam Trigger Button under the handle Can I put detergents or other chemicals inside the tank No you would damage the product What if in the city where live the water is very hard You can use filtered water or you will have to change the filter cassette more often If you find very weak steam check steam orifice you can descale it by inserting small tools into steam orifice if necessary How long will one tank of water last before needing to be refilled Approximately 12 minutes if you press continuously the trigger Is the mop washable Yes it can be washed by hand or in the washing machine with a mild detergent at max te
6. emove Carefully fill Water Cup with water and pour into Water Tank through the fill hole Do not add any chemicals detergents or perfumes to the clean Water Tank 6 NOTE In order to significantly reduce mineral build up and prolong the life of your steam mop the use of distilled or de mineralized water in the unit is highly recommended 5 Attach a Textile Pad to the base of the Floor Head 3 IMPORTANT Always unplug the cleaner when adding waiter or changing a Textile Pad NOTE Wash the Textile Pad prior to use to remove any lint STEAM CLEANING HARD FLOORS NOTE Always sweep or vacuum the floor prior to use to remove any loose dirt or debris IMPORTANT Do not use the cleaner without a Textile Pad attached to the Floor Head NOTE Do not use the Carpet Glider when cleaning hard floors 1 Plug the steam cleaner into the mains power Turn Steam Control Dial clockwise from OFF to MAX Power light will blink The desired steam intensity setting depends on the current steaming task Rotate the Steam Control Dial for desired steam intensity 2 After a few seconds Power Light stops blinking indicating the cleaner is ready for use 3 Recline the cleaner by placing a foot on the Floor Head and lowering the main body towards the floor 8 4 Move the cleaner slowly backwards and forwards paying particular attention to high traffic areas REFRESHING CARPETS NOTE Always sweep or vacuum the floor prior to use to remov
7. mperature 40 C Do not use bleach or fabric softener How often should I replace the mop It depends on different factors above all how hard the floor is The best way to understand when to change the mop is when the mop is still dirty after having washed it or if you notice that it doesn t perform like before IMPORTANT INFORMATION Hoover spares and Consumables Always replace parts with genuine Hoover spares These are available from your local Hoover dealer or direct from Hoover When ordering parts always quote your model number Consumables Textile Mop Pads x2 AC33 35601658 Flexible Hose D151 35601656 Textile Small Cloths x3 AC27 35601392 Hoover Customer Helpline Service Should any faults occur with your cleaner during the first 12 months contact the Hoover Customer Helpline on the number below Tel 08444 995 599 Email customer services hoovercandy com Quality Hoover s factories have been independently assessed for quality Our products are made using a quality system which meets the requirements of ISO 9001 Your Guarantee The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee Subject to change without notice
8. t be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this appliance please contact your local city office your household and waste disposal service or the shop where you purchased the appliance This appliance complies with the European Directives 2006 95 EC 2004 108 EC and C 2011 65 EU HOOVER Limited Pentrebach Merthyr Tydfil Mid Glamorgan CF48 4TU UK GETTING TO KNOW YOUR CLEANER SE CAPIODOZ EF APIO Handle Cord Hook Power Cord Handle Release Button Handheld Carry Handle Steam Trigger Button Water Tank Floor Head Water Tank Cap Steam Control Dial Power Light Utility Head Small Cloth Window Squeegee Conic Tool Hose Round Brush Metal Brush Comb Brush De scaling Tool Water Cup Carpet Glider Textile Pad ASSEMBLING YOUR CLEANER Remove all components from the packaging 1 2 Insert the handle into the cleaner main body until it locks into position 1 Assemble the main body of the cleaner to the Floor Head 2 USING YOUR CLEANER BEFORE YOU BEGIN CLEANING 1 2 w gt Make sure Steam Control Dial is set to OFF position Rotate Water Tank Cap one quarter turn in Unlock direction anti clockwise indicated by illustration on Cap and r
9. uipment containing electrical components such as the interior of ovens Unplug the cleaner and switch off before filling the water container Do not fill over the MAX mark The filling aperture must not be opened during use es Danger of Scalding Surfaces are liable to get very hot during use Avoid contact with steam Do not stand on or wrap the cord around arms or legs when using your appliance Do not position the appliance above you when cleaning the stairs When using the cleaning tools ensure to always steady the appliance with your other hand This will ensure that the appliance does not fall while in use Do not handle the plug or appliance with wet hands Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord Do not continue to use your appliance if it appears faulty Hoover service To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer Do not immerse the appliance in water or other liquids Do not use detergents or liquids other than water inside the appliance For UK and Ireland only This appliance has a 13 Amp mains plug If you need to change the fuse in the mains plug use a 13Amp ASTA BS1362 fuse The Environment The symbol on this appliance indicates that this appliance may not be treated as household waste Instead it mus
Download Pdf Manuals
Related Search