User Manual ser Manual ser Manual
Contents
1. equipped with a DATA PORT jack for guests to connect an auxiliary phone device such as a computer modem or a fax machine Normally connect to LINE2 7wo Line models only 18 FCC APPROVAL The Regal star telephone Series complies with Part 68 of the FCC rules On the bottom of this telephone is a label that contains among other information the FCC registration number and the ringer equivalence number REN for this telephone If requested you must provide this information to the Telephone Company 19 CE APPROVAL The Regal star series phone complies with CE approval 20 JACKS The Regal star series phone uses RJ11C USOC standard modular jacks 21 The Ringer Equivalence Number REN The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 22 Hearing Aid Compatibility The Regal star Series is hearing aid compatible 23 WARRANTY This product is warranted for a period of 12 month from the date of purchase against faulty materials or workmanship If during this period a defect arises we may repair or replace the product at Bittel s discretion provided that 23 1 The product has not been used for any purpose other than2. features 4 15 Vol Key 4 16 Vol Key 4 17 Flash Key Enters a 600ms hook switch flash for accessing special telephone system features 4 18 SPKR Key Activates speakerphone function 4 19 CONF key Makes three way conference call using both line 1 and line 2 4 20 Line2 key Selects line 2 and activates speakerphone 4 21 Message Waiting Light Ringer and new message indicator also as a programmable memory key 4 22 Line1 key Selects line 1 and activates speakerphone 4 23 Hold Key Places calling on the currently line on hold 5 Note Location and controls refer to model HA9886 48 7 SD C4 T of Pic 7 Page 3 of 10 7 8 9 10 RINGER1 RINGER2 DATA TOTEL LO HI LO HI J 1 f N 11 IN J 42 Sea Crt GD 13 ooooo Ma c 2 OOS lb 2 pu CD 16 Coens 2 CD 17 DOWO 4 G9 1 f i E 23 22 21 20 19 Pic 1 Page 4 of 10 6 SPEICAL FEATURES 6 1 Handset and Base double dialing phone set 6 2 Busy tone disconnect automatically 6 3 Memory keys programming with Hand Held memory cloner or R P master cloner 6 4 Redialed number disappear with
3. normal use 23 2 Unauthorized product repair or modifications have not been attempted 23 3 The product has never been used in a harsh or corrosive environment 23 4 No damage in transit THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM JURISDICTION TO JURISDICTION This warranty is only valid for merchandise purchased directly from Bittel or from dealers or distributors Bittel Co authorized Page 8 of 10 24 FCC WARRNING This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CONTACTING BITTEL Telephone 86 633 22121 77 2212103 2212160 Internet www bittelgroup com Email info bittelgroup com Address Shandong Bittel Electronics Co Ltd No 1 Rizhao North Road Rizhao Shandong 276800 China Copyright 2013 Bittel Inc All rights reserved V2 0 Page 9 of 10
4. G LIGHT 11 4 2 Press the appropriate LINE key for the new incoming call 11 4 3 After completing the new call press the LINE key of the call on hold to resume the call It is compatible high voltage neon 90V systems If there s message waiting just press MWL key to play messages MWL functions also as ringing indicator Note Only in 12 ADJUSTING HANDSET AND SPEAKER On hook mode press MWL to turn on the phone press the MWL again can keep the phone resume to on hook VOLUME E During calling mode press VOL key to adjust the volume for handset and speaker With each press it cycled as Low medium 16 MESSAGE PROGRAMMING WITH high total three level CLONER After on hook the handset volume resume to the low level Em s For initiative programming the one touch memory keys Speaker YOHIDS KSP Me GUTEN ever and MWL key with R P cloner need do following to set the programming switch oe hee ihi duin E wm of the telephone labeled OUI Bess c d aene ee Oe th h t t th ial t ti d RINGER and RINGERS wih LOWIHI Slide the switen 46 ihe 102 ree Id tone conenua i Mute LED indicator flashing three times means this desired LOW or HI ring volume for each line 7wo Line models device enter into programming mode if the phone set only For single line model only one RIDNGER switch Adjustment as One maio press key and last 5 seconds wo ine mode the phone set send out three dial t
5. User Manual Corded phones 48 Series Table of Contents 10 CONFERENCE 22 Hearing Aid Compatibility 11 USING THE HOLD KEY 12 ADJUSTING HANDSET AND SPEAKER VOLUME 23 WARRANTY 24 FCC WARRNING 1 NOTE 2 13 ADJUSTING RING VOLUME 7 2 UNPACKING YOUR PHONE 2 14 PROGRAMMING MEMORY KEYS MANUALLY 7 3 INSTALLATION 2 15 MESSAGE WAITING LIGHT 7 4 CONTROLS CONNECTIONS AND FUNCTION KEYS 2 16 MESSAGE PROGRAMMING WITH CLONER 7 5 Note 3 17 DATA PORT 8 6 SPEICAL FEATURES 5 18 FCC APPROVAL 8 7 PLACING A CALL 5 19 CE APPROVAL 8 8 RECEIVING A CALL 5 20 JACKS 8 9 SPEAKERPHONE TIPS 5 21 The Ringer Equivalence Number REN 8 6 8 6 8 7 9 1 NOTE 1 1 C series adopt membrane button just on handset and double dialing 1 2 B series no membrane button and no double dialing function 2 UNPACKING YOUR PHONE This package should contain the following 2 1 Regal star base unit 2 2 Faceplates 2 3 Handset 2 4 Coiled handset cord 2 5 Straight line cord 2 6 Movable special tray 2 7 Placard and placard stand 2 8 This manual 3 INSTALLATION The Regal star Series is designed for hotel applications and behind a registered PBX system in hotel Determine you have the correct modular jack for connecting the telephone If you do not have a modular jack one may be obtained at minimal cost at a local hardware store discount store or home center 3 1 Located on the left side of the Regal star phone is a modular jack In
6. he two parties In a three way phone conversation press LINE1 or LINE 2 to reserve a call on the corresponding line the not pressed line will be automatically disconnected 10 4 Change conference call from handset to speaker mode Press SPKR and put handset back to the cradle 10 5 To end the conference call Put handset to the cradle or press SPKR key 11 USING THE HOLD KEY 11 1 Place a call on hold Press HOLD key to place the caller on hold The indicator for the line on hold will get red 11 2 To remove a call from hold 11 2 1 On single line models S 79g e Line models only To release hold in handset mode press SPKR key or lif t handset again In speakerphone mode press SPKR key 11 2 2 On two line models 7wo Line models only To release hold press corresponding LINE key In case both two lines are in hold mode lifting handset or pressing SPKR will release LINE 1 priority 11 3 To change phones after placing a call on hold 11 3 1 Place the caller on hold by pressing HOLD key 11 3 2 Replace the handset in its cradle When using speakerphone just press HOLD to place the caller on hold 11 3 3 Pick up the call at another telephone The BITTEL phone will detect the current status and remove the hold condition at the original phone Page 6 of 10 11 4 Receiving a second call 7wo Line moders only 11 4 1 Press HOLD key the current call will be on hold 15 MESSAGE WAITIN
7. in 5 minutes after dialed 6 5 Placard and bracket 6 6 Movable special tray for handset cord 7 PLACING A CALL 7 1 Using the Handset 7 1 1 Lift the handset 7 1 2 The Regalstar telephone or press the ON OFF button on handset will select the appropriate idle line Two Line models only 7 1 3 Listen for dial tone Dial the desired number 7 1 4 To end the call hang up by replacing the handset or press ON OFF key 7 2 Using the Speakerphone Press the SPKR key and the phone will select a free line normal select LINE 1 OR With the handset in the cradle press the LINE1 or LINE2 keys The telephone will go off hook on the selected line with speakerphone active NOTE The red SPKR LED will indicate that the speakerphone is active Two Line models only 1 Wait for a dial tone 2 Dial a phone number 3 Press SPKR key when finished 8 RECEIVING A CALL 8 1 Using the Handset When the phone rings the corresponding line s indicator flashes rapidly 8 1 1 Pick up the handset The line is automatically selected Two Line models only 8 1 2 To end the call hang up by replacing the handset or press ON OFF key 8 2 Using the speaker phone When the phone rings the corresponding line s indicator flashes rapidly 1 Press the SPKR key 2 The speakerphone comes on automatically and selects a line Two Line models only 3 Press SPKR when finished 9 SPEAKERPHONE TIPS 9 1 To activate the ha
8. ndset from speakerphone mode Lif t the handset 9 2 To activate the Speakerphone from handset mode 9 2 1 Press the SPKR key 9 2 2 Hang up the handset Page 5 of 10 10 CONFERENCE Two Line models only 10 1 Making a conference call The CONF key allows the user to originate or include two parties in a three way phone conversation Typical conference calls are User initiates two calls User initiates one call after receiving a call User includes two callings 10 1 1 User initiates two calls 10 1 1 1 Place a call to first party 10 1 1 2 Place the first party on hold 10 1 1 3 Place another call to a second party 10 1 1 4 Press the CONF key All callings will be connected 10 1 2 User initiates one call 10 1 2 1 Receive a call from first party 10 1 2 2 Place the calling on hold 10 1 2 3 Place a call to second party 10 1 2 4 Press the CONF key All callings will be connected 10 1 3 User includes two callings 10 1 3 1 Receive call from first party place on hold 10 1 3 2 Receive another call from second party 10 1 3 3 Press the CONF key All callings will be connected 10 2 Talking individually to one party without exiting conference mode 10 2 1 In a three way phone conversation press HOLD key to hold both lines 10 2 2 Press corresponding line key to talk to the party on the line 10 2 3 Press CONF key again to resume three way conference 10 3 To disconnect one of t
9. one continually and Mute LED indicator flashing three times means this 14 PROGRAMMING MEMORY KEYS MANUALLY device exit the programming mode if the phone set with To program the auto dial keys the telephone must be connected to mute key a telephone line 16 3 When this device succeeds in programming it will 14 1 Lift handset or press SPKR exit the programming mode automatically If the 14 2 Press STORE Dial the number desired including PAUSE programming fails and needs to quit the programming and FLASH key where necessary press STORE key again The mode Just do as above 16 2 step Programming again sequence can be up to 16 digits in length need to open the programming device 14 3 Press a Memory key including MWL to finish 16 4 Passive programming and program with Hand Held 14 4 Hang up the handset or press the SPKR key to disconnect cloner no need to set the programming switch Detail the telephone information for the cloner please view their user manual accordingly Page 7 of 10 Note 1 If used Hand Held cloner can not dial out and answer incoming calls during programming Press VOL key or On hook to stop programming 2 If using R P cloner can not dial out and answer incoming calls during programming If a phone call come in press VOL key to pick up the phone call and will PAUSE the programming after the phone call then to continue the programming again 17 DATA PORT This phone is
10. sert one end of the coiled handset cord into this jack you will hear the coil cord click when properly inserted 3 2 Insert the other end of the coiled handset cord into the modular jack on the handset 3 3 Turn the telephone so the back panel is facing you Insert either end of the line cord into the jack on the upper side of the telephone labeled TO TEL 3 4 Insert the other end of the line cord into a telephone wall jack 4 CONTROLS CONNECTIONS AND FUNCTION KEYS 4 1 Handset Jack Modular jack to connect coiled handset cord from handset to telephone 4 2 Flash Key on handset Enters a 600ms hook switch flash for accessing special telephone system features 4 3 Volume key Adjust phone volume with three level 4 4 Redial key Redials the last number dialed 4 5 On Off key Active phone on hook or off hook after pick up handset 4 6 Digital keys on handset Keypad for dialing numbers 4 7 Data port Provides access to telephone line for modem fax or answering machine 4 8 Telephone Jack Connect line cord from wall to telephone 4 9 Ringer Switch for Line 1 Adjusts LINE 1 ringer volume to LOW or HI 4 10 Ringer Switch for Line 2 Adjusts LINE 2 ringer volume to LOW or HI Page 2 of 10 4 11 Movable paper faceplate 4 12 Store Hidden button 4 13 Pause Hidden button 4 14 Memory Keys Programmable for one touch dialing of frequently used numbers or to add special
Download Pdf Manuals
Related Search