MX-G10 MKII - marrex technology co.,ltd
Contents
1. 15 seconds if you just shut it down then restart and 1 second to wake it up For successful positioning you must be outdoors with good weather and a sky unobstructed by tall buildings Mount the MX G10 MKII to the camera s hot shoe or secure it to your camera s neck strap or neck strap lug with the supplied strap and clip leaving the shoe free for use with a flash or other device Connect the GPS unit to DSLR camera with the supplied data cable When inserting the cable be sure that the end is oriented correctly and do not use force Turn on your camera View geotag information on camera A Select GPS device settings B Select GPS information display OOOO ee HE eE GPS device settings Auto power off Disable LCD brightness 3 HH eS Date Time Zone 14 06 17 22 39 Auto time setting Auto update Position update timing Digital compass Enable GPS information displa Calibrate digital compass Language 2 English GPS device settings MENU ip C The detailed GPS information is displayed GPS information display Latitude N22 37 38 4 Longitude E114 03 51 6 Elevation 96m Direction N 0 UTC 2014 06 19 07 59 21 Satellite reception Sul 3D MENU Jaa 7 With the MX G10 MKII turned on once you begin shooting the geotag information of each photo will be displayed on the camera s LCD Geotag information can be viewed on a computer when images are uploaded to phot2. your computer as a removable drive Copy the update file upd to the MX G10 MKII it will be upgraded automatically and the LED will blink yellow When the upgrade is successful the LED turns to solid yellow If fails the LED turns to blink red then please unplug the USB cable and try again Note When the GPS receiver is upgrading please keep powered on and DO NOT unplug the USB cable If powered off during upgrading the GPS receiver will be seriously damaged the costs of returns to the factory repair will be paid by you Warranty Marrex Technology Co provides a one year warranty under normal use and lifelong paid maintenance from the date you purchase this product Marrex Technology will repair or replace the product under warranty for free during the one year valid period but customers should pay for shipping and insurance charges for returning the product to Marrex Technology This warranty only applies where a defect has arisen wholly or substantially as a result of faulty manufacture parts or workmanship during the warranty period This warranty does not cover e Any damage caused by human factors including using the products in abnormal conditions and operating the device in ways not in accordance with the user manual e Any damage caused by incorrect use or poor maintenance or when persons not authorized by Marrex Technology have carried out alterations or repairs e Force majeure events such as f
3. User Manual MX G10 MKII GPS Receiver For Canon www marrex cn Statement Please read this manual carefully before using and strictly operate and store in accordance with the instructions Please save it for your future reference If the user manual cannot help you to solve certain problems please ask your retailer for help or email us info marrex cn Cautions e Do not use the unit under water and don t expose it to rain Please store it in a cool dry place e Please charge the unit strictly according to related rules Otherwise damage might be caused to the battery e Please do not move it from overheated to supercooled conditions frequently as well as keep away from heat sources such as heater and oven e Please be careful to install the MX G10M MKII gently to avoid damage to the device or camera e Please turn off the power when left unused PRODUCT INTRODUCTION General Introductions The Marrex MX G10 MKII is a new version of GPS receiver specially designed for Canon DSLR cameras It is very useful for photographers to organize stock photos With the MX G10 MKII figuring out when where and why a certain photo was taken is not a problem anymore When connected to the camera and positioned successfully the GPS information longitude latitude elevation and Coordinated Universal Time will be recorded as EXIF data With the log function travel routes will be recorded into internal storage The MX G10 MKII is eq
4. e G Charge Interface Data Interface connect to camera Power Button LED Operation Charge Connect the MX G10 MKII with the provided USB cable to a travel adapter a computer slower charging speed or any other USB port which provides standard 5 volts It will automatically start charging and the LED will blink red When the GPS unit has been fully charged the LED turns to solid green Tips Since the MX G10 MKII can t charge from the camera please fully charge the unit usually takes 4 hours before use For long time shooting please take a power bank with the supplied USB cable with you 1 2 Power On and Off Press the power button for more than 3 seconds to turn the MX G10 MKII on Press the power button for more than 3 seconds to turn the MX G10 MKII off LED Status Blinking Green Acquiring satellites Solid Green Satellite connection successful Fully charged under charging mode Blinking Red Charging Upgrade failed Solid Red Low battery Blinking Yellow Upgrading Firmware Solid Yellow Upgrade successfully Setup Guide Turn the camera Off Press the power button for more than 3 seconds to turn on the GPS receiver The LED on the GPS receiver will blink green indicating that it is searching for satellites When a steady satellite signal is captured the LED will stop blinking It takes about 60 seconds to start the receiver up when cold
5. ettings as the following screen shows set GPS device to Enable and then select GPS device settings ALF r L Auto power off min LOD brightness Auto DatefTime Zone O1 11 12 13 30 Language English VF grid display Disable GPS device settings GPS device settings GPS device Enable GPS device settings e On the EOS 1DX and other models that display the above screen set GPS device to Enable and then select GPS device settings 2 Set Digital compass to Enable GPS device settings Digital compass Disable 18143 3 Select Calibrate digital compass GPS device settings Auto time setting Disable Position update timing Digital compass Enable GPS information display Calibrate digital compass _ 4 Press lt gt to prepare for calibration Move the camera as shown Calibrate digital compass i Cancel 5 Screen will display the following indicating the compass calibration is complete Calibrate digital compass Digital compass calibration complete GPS Firmware Upgrade In order to fix bugs and improved stability Marrex may release new versions of the firmware The new firmware will be released on our website You could update your MX G10 MKII by the following steps Download update file upd from www marrex cn to your computer Connect the GPS to your computer by the supplied USB cable The MX G10 MKII will show up on
6. ire flood lightning strike earthquake e Customers who cannot show a valid invoice Marrex Technology reserves all the rights for the ultimate interpretation Compatibility Canon 1DX 1DC 5DMark III 5DS 5DS R 6D 7D 70D 100D 650D 700D 750D 760D 1200D EOS M EOS M2 Packing List e MX G10 MKII main unit e USB cable e Data cable e A clip To attach the MX G10 e Hanging strap e User manual MKII to your camera strap e Warranty card COPYRIGHT 2011 2021 MARREX TECHNOLOGY A brand of DSQN Web www marrex cn Email info marrex cn
7. o sharing sites like Flickr or opened in imaging software such as Picasa ACDSee GeoSetter Opanda IExif Adobe Lightroom FSViewer Log Function The MX G10 MKII will record GPS information once every 5 seconds into log gpx and kml file which stored in the built in removable disk Connect the GPS receiver to a computer by the supplied USB cable and open the GPS folder There are three file forms kml gpx and log txt All have the same content but are suitable for different software kml is for Google Earth gpx and log file are for most other softwares Copy the suitable file to the suggested software All the GPS dots will connect together and show as a track The memory capacity of the built in disk is 4 35MB This allows you to record up to 85 376 positions The GPS receiver could continuously log for about 118 hours The subsequent positions cannot be recorded into the disk if it is filled Please export the log files and delete them regularly to maximize storage space Please note One log file is created every 24 hours according to Coordinated Universal Time UTC So depending on the time difference between your shooting local time and UTC two separate log files may be created even if logging is only active over one day Similarly only one log file may be created even if logging is active two days Compass calibration Please calibrate the compass via the camera setting Select GPS device s
8. uipped with a built in Li ion battery and LED indicator In addition the MX G10 MKII uses a highly sensitive antenna and upgraded GPS chipset to enhance the speed of positioning Highlights e GPS data hold If the GPS signal is lost the MX G10 MKII will automatically reuse the last valid GPS information for tagging the current photo Once the receiver is turned off the stored GPS data will lost e Built in Li ion battery A built in rechargeable battery can continuously run for up to 6 hours When connected to a camera the MX G10 MKII will not charge from the camera e Fast acquisition Highly sensitive antenna and upgraded GPS chipset accelerate the satellite searching speed In good weather and open sky the unit takes 60 seconds for a cold start 15 seconds for a warm start and 1 second for a hot start e Log function The MX G10 MKII will automatically record GPS information once every 5 seconds into the log gpx and kml files which are saved in built in storage e 3 axis electronic compass Provide accurate azimuth Range 0 359 Specifications Channels 66 capturing channels 22 tracking channels Tracking sensitivity 163dBm Capturing sensitivity 146dBm Positioning accuracy 3m CEP50 without SA 2 5m SBAS NMEA 0183 KML Logging mode One file per day based on UTC Battery 900mAh rechargeable Li ion battery Dimension LxWxH 73mm x 50mm x 31 5mm Weight Approx 68g 2 40z Product Structur
Download Pdf Manuals
Related Search