VT6912 MANUAL
Contents
1. 1 When using the power solely from the Connect to Monitor SEE Monitor only the Power on to unlock type 2 electronic lock can be supported The rt EN E E T rating of the lock must be less than 12V VT584 500mA 2 Connect the 2 Black wire to the 1 Red 434 Electronic lock wire from Monitor connect 1 Red wire to ceed ay eter Power on to open the lock connect 2 White wire from T greater than Tav 500mA ie Monitor to the lock Black Red sould 8 Specifications e Power Supply DC 10 12V Powered by Monitors e Consumption 150mA in working state latch not included e Video Output 750hm 1Vp p CCIR standard unless specified e Camera 76 degree CCD or CMOS camera with IR LED e Working temperature 10 40 degree VT ENG 584 V2 090S8172. VT 584 Outdoor Camera User Manual Precautions Do not install camera bell where there would be a bright light behind the visitor or where there would be a bright background or in a place where the camera lens would be directly exposed to sunlight or a bright light If light shines directly into the outdoor camera lens the image will be over exposed it will look white or silhouetted Take precautions against this Do not install the unit in places where is constant vibration extreme heat or unusual external interference 1 Product Features 4 wire Door Entry system compatible with VT6xx series Monitors Camera angle adjustable Connects up to 5 Monitors Suitable for flush mounting Can also be surface mounted by rain cover not included 2 Parts List VT584 Door bell camera 1 piece 4 Pin wire connector 1 piece to connect Indoor Monitor 3 Pin wire connector 1 piece to connect lock 3 Parts and Functions i lige al 20s 1 Microphone 6 2 Camera NO CGI 7 3 Night View LED 4 Call Button o9 b 8 5 Speaker E EEEE 5 6 Angle Adjust PEEEEEE EE Q 7 Monitor Port 8 Unlock Port LB 4 Mounting Instruction 1 Cut a hole in 75mm X 75mm X 35mm in the wall Insert the mounting bracket and fix with screws 2 Wire up the cables and test the system 3 Hang the door bell camera body on top of the mounting box
3. then tighten bottom 145 cm the screws firmly on the VT ENG 584 V2 090S817 5 Connect an electron lock power ON to open Connect to Monitor 1 When connecting an electric lock an 2 8 external power supply is needed not VT584 EE A EET ET included 5 2 The rating of the lock must be less than RANE DC 48V 1 5A Electronic lock Safety Type Power on to open 3 Connect the 2 Black wire to the power Adapter 5x The lock consumption must not connect 1 Red wire to lock and greater Han 49V TSA connect the power to the lock Black Red 6 Connect an electro magnetic lock power OFF to open Connect to Monitor 1 When connecting an electro magnetic p 3 lock an external power supply is needed not included with this product VT584 Keep the JS LK jumper on Monitor v 2 The rating of the lock must be less than 321 ec DC 48V 1 5A 2 Electron Magnetic lock Safety Type Power off to open E The lock consumption must not greater than DC 48V 1 5A Adaptor 3 Connect the 2 Black wire to the power connect 3 White wire to lock and il connect the power to the lock 7 Connect a lock using the Monitor power only
Download Pdf Manuals
Related Search