Home

User Manual for Windows OS

1. min 0l max O mm if 0 gt disable Click Point Correction Radius mm 0 E Use Mouse Over Delay C Drawing Speed Up Ambient Skip Default Setting Calibration Touch Area Setting inh Drawing Test To configure a touch screen device first locate the device on device listing table at the top of the screen If more than one touch screen is connected all PulselR devices will be listed here Click on a device icon to view the current settings for that device Touch On Off This function enables and disables the touch detection for special testing and set up needs Touch Mode Mode Purpose Auto Automatic OS Detection for OS running Windows Linux Mac Stylus Supports stylus operation in Android OS and Multi touch capability in Linux OS with Kernel 3 5 or higher version Mouse Single Point Mouse mode When Switching Operating Systems The configuration settings are preserved by the on board controller of the touch screen When changing the Touch Mode open the PulselR Controller application Click on Apply button then wait while the warning not to unplug the USB connector is shown When ready the touch screen will function normally in the new environment Mouse R Click Apply only in Mouse Mode Setting Effect Long Down extended touch triggers the Mouse R Click Disable do not support Mouse R Click event Touch Action Apply only in Mouse Mode Setting Effect Drawing Touch and Drawi
2. User Manual for Windows OS Quick Start User Manual for Windows OS Installation Default Operation PulselR Touch system is a plug and play HID USB Device which automatically manages device drivers eliminating any manual installation or upgrading of the drivers If you have Norton Antivirus program running this may prevent proper installation drivers If you encounter problems please disable Norton Antivirus temporarily while PulselR device is being connected Connecting the PuselR unit to a USB connector will automatically display the following message on the bottom taskbar i Found New Hardware PULSEIR touch UT 46inch In Windows OS PulselR touch screen is detected as an standard HID pointing device as shown below bX 4 Devices 5 Microsoft Microsoft PULSEIR touch RAY HUB VX2235wm Wireless Nano CM 24inch Transceiver Transceiver v1 0 Upon connection to a USB port PulselR touch system initializes DO NOT touch the screen while the new device found message box displays for approximately 3 seconds Installing and Using PulselR Controller Utility Programs Download PulselR Touch Utility package for Windows OS Extract the files and launch PulselRController exe application RA PulselRController e Resolution Origin Oxo 0 0 Parameter 5etting Touch ON OFF On Touch Mode Auto Stylus Mouse R Click Long Down Disable Touch Action Drawing Touch Only Touch Object Size
3. ility program must be previously downloaded 2 Click on Edit button of Multi Display Support Setting below the device information window See Figure A 3 Then the TUIO support window Display Setting for multi touch application opens 4 Inthe TUIO support window Display Setting please set parameters as follows Mouse emulation Off TUIO Support On 5 Then click Setting at the bottom of the window to finish the TUIO support See Figure A Multi Display Support Setting Display Setting Parameter Setting ci Touch ON OFF On a Touch Mode Auto sf Mouse R Click Long Down F Di Touch Action Drawing 6 Tal Rotation 0 ar Calibration Touch Area Setting foun Drawing Test lt Figure A gt 6 In PulselR utility folder installed please run PulselRService exe to run TUIO server See Figure B ReadMe PulselRController PulseIR amp IRVisualScope 2 gt IRVisualScope amp FirmwareUpgrade lt Figure B gt 7 Test it with TUIO client program to see if TUIO works
4. ll be ignored Default Setting Button Resets the touch screen to default mode according to the OS But the calibration is not reset even if executing Default Setting Reset Button Initialize Calibration and Touch Area setting Apply Button Programs the touch screen controller with newly selected settings amp Warning Message When applying changes the following message box appears and the USB port automatically resets It is important that you do not unplug the USB connector Wait until this message box disappears before using the touch screen Please wak while LSE connection resets DO NOT unplug the USE unti this message disappears Using PulselR TUIO Interface Tool for Multi touch Capability In Window 7 8 the touch screen will automatically operate as a Multi Touch input device as auto mode In Windows Vista and XP however the OS does not have built in multi touch support Hence TUIO industry standard protocol for multi touch devices must be used to demonstrate multi touch capability TUIO Tool is provided for this purpose Assumption e We assume that the user already has a basic understanding of TUIO protocol and functionality e We can support TUIO protocol interface by using PulselR Controller tool described above TUIO Set Up Instructions for the Multi touch Capability 1 Launch PulselR Controller utility program PulselRController exe in the PulselR utility folder Note PulselRController ut
5. mended for touch screens with the 55 or less size and 0 mm for touchscreens over 55 Use Mouse Over Delay This function is supported in only Mouse touch mode Check this to apply Time Delay when touching down a menu button Drawing Speed Up Ambient Skip This function increases the drawing speed by 1 1 5 times more than the normal speed This function is recommended to use under the environment of no or weak ambient light Calibration Touch Area Setting Functions All PulselR touchscreens are custom fit to the frame and require no calibration as long as the touch and display areas are matched For special situations Calibration Touch Area and Reset buttons enable custom touch point alignment and area adjustments Function Button Description Touch Coordinate Calibration Corrects touch coordinate misalignment Touch Area Adjustment Touch Area Use to limit touch detection to a sub section only Reset to Default Reset Resets coordinate and area adjustments Calibration Setting Calibration button launches a program for manual calibration when an offset is required To compensate for misalignment between the touch screen and the display launch this program and touch the 4 points as they are presented Touch Area Setting Below is Touch Area Setting screen Drag a rectangular area from top to bottom diagonally Touch detection will be active only within this area Touch points outside of this rectangle wi
6. ng support Touch Only For simple touch detection only No continuous tracing for drawing and scripting Touch Rotation For special mounting configuration relative to display orientation If the touch screen is attached to the display in normal orientation the rotation of the display is controlled by Windows Display Setting dialog box Select a desired Orientation for display placement and the touch screen will automatically adjust Display Resolution 1920 x 1080 recommended v Advanced settings Make text and other items larger or smaller What display settings should I choose OK Cancel Apply However if the installation requires mounting the touchscreen in different orientation relative to the display then this Rotation setting can be used changed to suit the need Please click the link httos www hightail com download UIRSdOVOWkJwI VhvS3NUQw for Rotation setting instructions Touch Object Size This function controls the size of object to have the touch detected The only object the size is between Min and Max is able to be detected If both of Min and Max are set to 0 this feature is disabled The 80 or more value is recommended for the Max setting value Click Point Correction R This function compensates the human touch error which may be happened by inaccurate touch The radius of touch point should be set to activate this feature The 3 mm is recom

User Manual for Windows OS

Contents

Download Pdf Manuals

Related Search

Related Contents