Owner`s Manual Home Theater Audio System
Contents
1. AC power supply cord connection Connect only after all other connections are completed Toan AC outlet 9 AC power supply cord O4 e This system consumes a small amount of AC power p 21 even when it is turned off In the interest of power conservation if you will not be using this system for a long time unplug it from the AC outlet 8 VQT5J41 D Bluetooth connection By using the Bluetooth connection you can listen to the sound from your Bluetooth audio device to this system wirelessly Refer to the operating instructions of the Bluetooth device for further instruction on how to connect a Bluetooth device Preparation eTurn on the Bluetooth feature of your device and place your device near the main unit Bluetooth pairing amp K Press to select Q e Ifthe Q indicator flashes quickly go to step 3 Press and hold Q until the indicator flashes quickly e Ifthe Q indicator flashes slowly repeat step 2 Select SC HTB8 from the Bluetooth menu of your device f prompted for the passkey on the Bluetooth device enter 0000 Once the Bluetooth device is connected the Q indicator stops flashing and lights up Lo You can register 8 or more Bluetooth devices to this unit However when this unit is turned off it can store only up to 8 registered devices If you register 9 or more2. Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel To prevent injury this apparatus must be securely attached to the wall in accordance with the installation instructions AC power supply cord The power plug is the disconnecting device Install this unit so that the power plug can be unplugged from the socket outlet immediately Button type battery Lithium battery Risk of fire explosion and burns Do not disassemble heat above 60 C 140 F or incinerate DO NOT INGEST BATTERY CHEMICAL BURN HAZARD This product contains a coin button cell battery If the coin button cell battery is swallowed it can cause severe internal burns in just 2 hours and can lead to death Keep new and used batteries away from children If the battery compartment does not close securely stop using the product and keep it away from children If you think batteries might have been swallowed or placed inside any part of the body seek immediate medical attention If any electrolyte should come into contact with your hands or clothes wash it off thoroughly with water If any electrolyte should come into contact with your eyes never rub the eyes Rinse eyes thoroughly with water and then consult a doctor For USA California only This product contains a CR Co
3. Panasonic Owner s Manual Home Theater Audio System Model No SC HTB8 Q Bluetooth Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use If you have any questions visit U S A www panasonic com support Register online at www panasonic com register U S customers only Included Installation Instructions The installation work should be done by a qualified installation specialist gt p 10 to 14 Before commencing work carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly Please keep these instructions You may need them when maintaining or moving this unit VQT5J41 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit Follow the safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat
4. 1eem hern Ren 15 Advanced operations cccecceseeeeeeeeeee eee eeee eee eeeeeeeeeeaneaneeseeeeeeeeeeseneeeesneaneeeees 16 Reference Troubleshooting ecenn irren Anaa nee ek nen etre ENAKE KOATA NASEN AA RANEREN ENNA 17 f Xero t Mz 1I I rore re 19 Unit care cen Leere e tec tete Lr ener A 19 IBID e 19 Indicator illuminatlonh cere dez rrr notre ene dene nien end 20 Specifications uendere itecto etna 21 Limited Warranty ONLY FOR U S A eadein dere aneian n araa ee serena 22 4 VQT5J41 The illustrations shown may differ from your unit Operations in this Owner s Manual are described mainly with the remote control but you can perform the operations on the main unit if the controls are the same Supplied items Ll This system 1 Main unit Speaker SC HTB8 a Accessory Check the supplied accessory before using this system 1 Remote control with a battery N2QAYCO000102 L Product numbers are correct as of March 2014 These may be subject to change To order accessories refer to Accessory Purchases United States on page 22 VQT5J41 5 Control reference guide This system Front TERA o I vo INPUT OO TV BDDVD OQ QEARVOKE SURROUND O 6 ie D 5 PAIRING 3 4 5 6 1 Standby on switch 0 1 5 Input selector indicators Press to swi
5. 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart PA IC apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NOOR WN 2 VQT5J41 WARNING Unit To reduce the risk of fire electric shock or product damage Do not expose this unit to rain moisture dripping or splashing
6. Check the audio output settings on the connected device The volume is lowered when the main unit is turned on If the main unit is turned off with the volume setting in the greater half above 50 the main unit will automatically lower the volume to the middle 50 when the main unit is turned on gt p 16 The dialog is too persistent or the dialog does not sound natural This system has a function to make the dialog stand out when the volume is low 2 p 15 There is no audio The power of the main unit turns off automatically When the main unit detects a problem a safety measure is activated and the main unit automatically switches to standby mode There is a problem with the amplifier Is the volume extremely high If so lower the volume Is this system placed in an extremely hot place If so move this system to a cooler place and wait a few moments and then try to turn it on again If the problem persists check if the TV indicator and the BD DVD indicator are blinking first After checking the indicators turn off this system unplug the AC power supply cord and consult your dealer Make sure to remember which indicators were blinking and inform the dealer of them 1 8 VQT5J41 About Bluetooth Panasonic bears no responsibility for data and or information that is compromised during a wireless transmission W Frequency band used This system uses the 2 4 GHz frequency band Wi C
7. a paired Bluetooth device when the main unit is in standby mode E While pressing and holding SURROUND on the remote control press and hold Q on the main unit for more than 4 sec to display the current mode BD DVD as GEAR VOIE riy BD DVD indicator blinks Bluetooth Stand by is on CLEAR VOICE indicator blinks Bluetooth Stand by is off While the mode is displayed press SURROUND to select the mode The setting changes each time SURROUND is pressed The indicator for the selected setting blinks for 20 sec and then exits the setting mode The setting is maintained until it is changed again Default setting of this function is off 1 6 VQT5J41 Dimmer mode You can turn off dimmer mode and keep the LED indicators bright While pressing and holding INPUT on the remote control press and hold VOL on the main unit for more than 4 sec to turn off Dimmer mode The indicator for the current condition will turn brighter The setting is maintained until it is changed again Default setting of this function is on L To turn on dimmer mode repeat the operation above After performing the operation the indicator for the current condition will be dim Others W Remote control code When other Panasonic devices respond to this system s remote control change the remote control code on this system and the remote control Preparation Turn off all other Pa
8. adequately insured and packed well in a carton box When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is required under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference MODEL NUMBER SERIAL NUMBER SC HTB8 ma
9. devices devices with the oldest connection history will be deleted Connecting a paired Bluetooth device Em Press to select Q e Ifthe 9 indicator lights a Bluetooth device is already connected with this system Disconnect it c below Select SC HTB8 from the Bluetooth menu of your device 3 s E 7 D 7 0 W Disconnecting a Bluetooth device Press and hold Q until the Q3 indicator flashes slowly Lo e When e is selected as the source this system will automatically try and connect to the last connected Bluetooth device If the connection attempt fails try to establish a connection again The Bluetooth device will be disconnected if a different audio source e g TV is selected This system can only be connected to one device at a time VQT5J41 9 Step 2 Placement D Safety Precautions Professional installation is required The installation should never be done by any other than a qualified installation specialist PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND OR SERIOUS INJURY INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING Be sure to install the main unit as indicated within this Owner s Manual Attach using techniques suited to the structure and materials of the installation location Caution This system is to be used only as indicated in these instructions Failure to do so may lead to damage to the amplifier and or the
10. 80 Passive Radiator Unit s 8 cm x2 3 1 2 Bluetooth SECTION Bluetooth system specification Bluetooth Version 3 0 Wireless equipment classification Class 2 2 5 mW Supported profiles A2DP with SCMS T Supported codec SBC Frequency band 2 4 GHz band FH SS Operating distance approx 10 m 33 ft Line of sight Power supply For table top layout Dimensions WxHxD TERMINALS SECTION Digital Audio Input TV Optical digital input Optical terminal Sampling Frequency 32 kHz 44 1 kHz 48 kHz 88 2 kHz 96 kHz Audio Format LPCM Analog Audio Input BD DVD Audio input Pin jack GENERAL Power consumption 16 W Power consumption in standby mode Approx 0 5 W AC 120 V 60 Hz 750 X65 5 X118 mm 29 17 32 2 19 32 4 21 32 For wall mounting layout Dimensions WxHxD 750 x115 x65 mm 29 a2 X4 7 2 x 2 9 16 Mass Weight Approx 2 3 kg 5 07 Ibs Operating temperature range 0 C to 40 C 32 F to 104 F Operating humidity range 20 to 80 RH no condensation Specifications are subject to change without notice Mass and dimensions are approximate Total harmonic distortion is measured by a digital spectrum analyzer o o S 2 E a VQT5J41 2 1 Limited Warranty ONLY FOR U S A Panasonic Products Limited Warranty Limited Warranty Coverage For USA Only If your product does not work properly because of a defect in materials or workmanshi
11. e the MULTI ANGLE switch to WALL MOUNT 3 Hs E 7 D 7 0 9 Cord x If the cord cannot be threaded through the holes try bending the cord in 2 locations about 5 mm 16 apart from the tip at an angle of 45 as illustrated above VQT5J41 1 3 B Drive a screw into the wall Use the measurements indicated below to identify the screwing positions on the wall Leave at least 20 mm 5 s2 of space above of the main unit to allow enough space for fitting the main unit Leave at least 10 mm 19 32 of space on both sides of the main unit Without sufficient space it is not possible to mount the main unit successfully Be sure to use a level to insure that both mounting holes are level to each other Atleast 30 mm 1 2 16 Q 24 0 mm 5 z 7 5 mm to 29 4 mm 9 z2 to 3 e Q Wall or pillar 7 5mm to 8 5 mm 7 32 to 11 32 Q 320 mm 12 19 32 215mm 8 15 2 215mm 8 15 2 15mm s2 115 mm 4 iz Wall mounting hole a Fit the main unit securely onto the screw s DO DO NOT Move the speaker so In this position the that the screw is in this eS e speaker will likely fall if position moved to the left or right B Secure the cord to the wall Make sure that the slack of the cord is minimal 9 Screw eye Cord 1 4 VQT5J41 Using this system Preparation Turn on the TV and or connect
12. eception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible Party Panasonic Corporation of North America Two Riverfront Plaza Newark NJ 07102 5490 Support Contact http www panasonic com contactinfo S Ks EJ E bd 9 x Qn This transmitter must not be co located or operated in conjunction with any other antenna or transmitter This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF Exposure Guidelines This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation MPE But it is desirable tha
13. ed device 9 Press to turn on the main unit Select the source Press To select TV gt BD DVD INPUTS 1 Q Bluetooth Q Q Bluetooth This remote control cannot be used to control the operations of the connected devices W When Q is selected as the source On the Bluetooth device Select this system as the output source of the connected Bluetooth device and start the playback W When BD DVD is selected as the source On the TV and the connected device Select the TV s input for this system and start the playback on the connected device W To adjust the volume of this system Press VOL e Volume range 0 to 100 E To set the surround mode You can enable disable the surround effect Press SURROUND To cancel press the button again E To set the clear voice mode With the clear voice mode you can hear dialogs clearer Press CLEAR VOICE To cancel press the button again W To mute the sound Press MUTE While muting all the indicators blink simultaneously To cancel press the button again or adjust the volume Muting is canceled if the main unit is turned off CJ If this system does not operate as expected or sound is unusual returning the settings to the factory preset may solve the problem gt p 17 x BD DVD indicator Bluetooth indicator and sound
14. ertification of this device This system conforms to frequency restrictions and has received certification based on frequency laws Thus a wireless permit is not necessary e The action below are punishable by law in some countries Taking apart or modifying the unit Removing specification indications W Restrictions of use Wireless transmission and or usage with all Bluetooth equipped devices is not guaranteed All devices must conform to standards set by Bluetooth SIG Inc Depending on the specifications and settings of a device it can fail to connect or some operations can be different This system supports Bluetooth security features But depending on the operating environment and or settings this security is possibly not sufficient Transmit data wirelessly to this system with caution e This system cannot transmit data to a Bluetooth device W Range of use Use this device at a maximum range of 10 m 33 ft The range can decrease depending on the environment obstacles or interference W Interference from other devices This system may not function properly and troubles Such as noise and sound jumps may arise due to radio wave interference if the main unit is located too close to other Bluetooth devices or the devices that use the 2 4 GHz band This system may not function properly if radio waves from a nearby broadcasting station etc are too strong W intended usage This system i
15. gle of 45 as illustrated above re Place the main unit in the desired position and attach the cord onto the rack or table Make sure that the slack of the cord is minimal Do not lean the main unit against the TV or wall Do not place the main unit over the AC power supply cord Ensure that the main unit is stable Q Screw eye e Attach at a position capable of supporting over 10 kg 22 Ibs eDepending on the placement of the main unit the screwing position of the screw eye may differ 1 2 VQT5J41 i When attaching the main unit to a wall Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg 73 Ibs The screws and other items are not supplied as the type and size will vary with each installation e Refer to step 3 for details about the required screws e Be sure to attach the fall prevention cord as a secondary safety measure Additionally required accessories commercially available Screws for wall rmourtirg occae eee eene D rece Da ra Spe RR EET XCeR a eae SERE Ede aA x2 S Fall prevention COP cccccscsscsccsscsecsecscsscsecsscsssecsecsavsessessesscsecsecaecaesassacsacsecsessesaesacsecarcatsatsuseaeats x1 e Screw eye to attach the fall prevention cord essere nennen x1 S o Dus a CJ Use a cord that is capable of supporting over 10 kg 22 Ibs with a diameter of about 2 mm s2 Em Slid
16. in Cell Lithium Battery which contains Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate CAUTION Unit Do not place sources of naked flames such as lighted candles on this unit Product Identification Marking is located on the bottom of the unit Placement To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items Button type battery Lithium battery Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer Keep out of reach of children Insert with poles aligned Mishandling of batteries can cause electrolyte leakage and may cause a fire Remove the battery if you do not intend to use the remote control for a long period of time Store in a cool dark place Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed Do not touch the terminals and with metal objects Do not recharge disassemble remodel heat or throw into fire When disposing of the batteries please contact your local authorities or dealer a
17. intenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or other memory or recorded content The items listed are not exclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to the warrantor s Consumer Affairs Departmen
18. iscard this product please contact your local authorities or dealer and ask for the correct method of disposal Panasonic Corporation of North America Em Two Riverfront Plaza Newark NJ 07102 5490 http www panasonic com O Panasonic Corporation 2014 nc A MU OTIT VOT5J41 F03 YOM2001630001 0314KE0
19. mode indicators blink from left to right or from right to left while adjusting The indicators will not blink when it has reached the maximum or minimum e f there is sound coming out of the TV s speakers reduce the volume of the TV to its minimum e If the main unit is turned off with the volume setting in the greater half above 50 the main unit will automatically lower the volume to the middle 50 when the main unit is turned on Volume limitation To turn this function off refer to page 16 VQT5J41 1 5 Precautions Getting started o c a 9 Advanced operations Auto Power Down The main unit is automatically turned off if there is no audio input and when you do not use it for approx 2 hours E While pressing and holding CLEAR VOICE on the remote control press and hold INPUT on the main unit for more than 4 sec to display the current setting BD DVD indicator blinks Auto Power Down is on BD DVD as CLEAR VOICE P While the setting is displayed press CLEAR VOICE to select the setting The setting changes each time CLEAR VOICE is pressed The indicator for the selected setting blinks for 20 sec and then exits the setting mode The setting is maintained until it is changed again Default setting of this function is off CLEAR VOICE indicator blinks Auto Power Down is off Bluetooth Stand by This function allows you to connect
20. nasonic products Turn on the main unit Change the remote control code to code 2 1 Aim the remote control at the main unit s remote control sensor 2 Press and hold MUTE and G on the remote control for more than 4 sec All the indicators will blink for 10 sec when the code of this system is changed TV BD DVD OQ CLEARVOICE SURROUND Io IS The setting is maintained until it is changed again L1 If the main unit does not operate after changing the code repeat steps 1 and 2 To change the remote control code to code 1 repeat the steps above but replace 61 with INPUT W To turn off the volume limitation If a state of the lowered volume disturbs you every time the main unit turns on for example it is possible to turn off this function as follows While pressing and holding MUTE on the remote control press and hold VOL on the main unit for more than 4 sec All the indicators will blink once when the volume limitation is turned off To reset the setting return to the factory preset gt p 17 Troubleshooting Before requesting service make the following checks If you are in doubt about some of the check points or if the solutions indicated in the following guide do not solve the problem refer to Customer Services Directory United States on page 22 To return to the factory defaults While the main unit is on press and hold I on the main
21. nd ask for the correct method of disposal The following mark and symbols are located on bottom of the unit CAUTION RISK OF ELECTRIC SHOCK zd DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance The exclamation point within an FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television r
22. p Panasonic Corporation of North America referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Home Theater Audio System 1 Year 1 Year All included Accessories 90 Days Not Except Non Rechargeable Batteries Y Applicable A Not Only Non Rechargeable Batteries 10 Days Applicable During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States This warranty is extended only to the original purchaser of a new product which was not sold as is Mail In Service Online Repair Request Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www panasonic com repair When shipping the unit carefully pack include all supplied accessories listed in the Owner s Manual and send it prepaid
23. s for normal general use only Do not use this system near equipment or in an environment that is sensitive to radio frequency interference example airports hospitals laboratories etc Unit care W Clean this system with a soft dry cloth When dirt is heavy wring a cloth moistened in water tightly to wipe the dirt and then wipe it with a dry cloth Never use alcohol paint thinner or benzine to clean this system Before using chemically treated cloth carefully read the instructions that came with the cloth W To dispose or transfer this system This system may keep the user settings information in the main unit If you discard the main unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings 2 p 17 To return to the factory defaults The operation history may be recorded in the memory of the main unit License The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Panasonic Corporation is under license Other trademarks and trade names are those of their respective owners VQT5J41 1 9 R E 2 E a Indicator illumination The indicators display the condition of this system by flashing The indicator patterns illustrated below are displayed during normal operational conditions They do not refer to the indications of a problem Indicator De
24. scription The indicator blinks for 20 sec BD DVD CLEARVOICE SURROUND When the setting is on as Auto Power Down and Bluetooth Stand by gt p 16 The indicator blinks for 20 sec TV BD DVD Q GEARVOICE SURROUND When the setting is off rah Auto Power Down and Bluetooth Stand by gt p 16 The indicators blink for 10 sec TV BD DVD When the remote control code is changed c p 16 FN FN r V The indicators blink once When changing the setting To turn off the volume limitation gt p 16 The indicators blink twice When the main unit is reset gt p 17 Bluetooth indicator blinks quickly CLEAR VOICE SURROUND When the main unit is ready for pairing p 9 Bluetooth indicator blinks slowly When the main unit is waiting to connect gt p 9 Bluetooth indicator turns on When the main unit is connected with a Bluetooth device gt p 9 TV BD OQ som I 2 0 VQT5J41 Specifications AMPLIFIER SECTION RMS output power Stereo mode Front ch non simultaneous drive 40 W per channel 1 kHz 10 THD 8 Q Total RMS Stereo mode power 80 W FTC output power Stereo mode Front ch both ch driven 200 Hz 20 kHz 25 W per channel 1 THD 8 Q Total FTC Stereo mode power 50 W SPEAKER SECTION FRONT SPEAKER L R Type 1 way 1 speaker system passive radiator type Unit s 8 cm x2 3 1 3 Cone type Impedance
25. speaker and may result in the risk of fire Consult a qualified service person if damage has occurred or if you experience a sudden change in performance Do not attempt to attach the main unit to a wall using methods other than those described in this manual L Do not hold the main unit in one hand to avoid injury you may drop the main unit when carrying it To prevent damage or scratches lay down a soft cloth and perform the assembly on it Ll Wireless interference To avoid interference maintain the following distances between the main unit and other electronic devices that use the same radio frequency 2 4 GHz band Q9 Main unit Q Wireless router cordless phone and other electronic devices approx 2 m 6 2 ft 1 0 VQT5J41 Selecting the placement method Choose a placement method that suits you best When placing the main unit on a rack or on a table e Place the main unitonaflat eeee and horizontal surface e Place the main unit in front of the TV pedestal Page 12 Precautions When attaching the main unit to a wall e Place the main unit ona ecco flat and vertical surface Page 13 W When placing the main unit in front of the TV The main unit may block or interfere with the TV s various sensors C A T S Contrast Automatic Tracking System sensor remote control sensor etc and the 3D Eyewear transmitters on a 3D compatible TV e If interference occurs move
26. t at the addresses listed for the warrantor PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY istomer Services Directory United States Obtain Product Information and Operating Assistance locate your nearest Dealer or Service Center purchase Parts and Accessories or make Customer Service and Literature requests by visiting our Web Site at http www panasonic com support or contact us via the web at http www panasonic com contactinfo For hearing or speech impaired TTY users TTY 1 877 833 8855 ccessory Purchases United States Purchase Parts Accessories and Owner s Manual online for all Panasonic Products by visiting our Web Site at http www pstc panasonic com Or send your request by E mail to npcparts us panasonic com You may also contact us directly at 1 800 237 9080 Fax Only Monday Friday 9am 9pm EST Panasonic National Parts Center 20421 84th Avenue South Kent WA 98032 We accept Visa MasterCard Discover Card American Express For hearing or speech impaired TTY users TTY 1 866 605 1277 As of April 2014 User memo DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER 2 2 VQT5J41 TI YEN VQT5J41 2 3 If you see this symbol Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to d
27. t it should be installed and operated keeping the radiator at least 20 cm 7 7 4 or more away from person s body excluding extremities hands wrists feet and ankles FCC ID ACJ SC HTB8 VQT5J41 3 Table of contents IMPORTANT SAFETY INSTRUCTIONS esses 2 Before use Supplied items esee ert ee eR RR FEE et EM ERRER HEAR ERR Rt sn 5 This system ACCESSO 53i dada tagen oret D DRY pee dee se AA ed ERR ea Pe d MU DEO vob Ee cue c Eee aat Control reference guide eeseeeeseeseeeeeeneeeenenene enne nnne nnne nennen 6 This system Front iiec roc c aee cena a re Geena E che a D E Reda ee caus 6 This system Rear Remote coritrol ines EA e ET E et loro dea etu e pend dede Getting started Step 1 Connectlons eerie tetti temer enin eiie eere mte ce deviwvenandelet Connection with the TV ce tette e t he iP Ne E aa Att ege Connection with other devices AC power supply cord connection Bluetooth connection ettet teret tette rrenean enarrant Step 2 Placemienft 55 raara aa aaa aa eco ze che AAE aa a tuse Eee aai AARAA E DIEI poacb BR cR ad Safety Precautions ai M ugane a a a i t pod i dad eene dave tes Wireless interference Selecting the placement method When placing the main unit on a rack or on a table When attaching the main unit to a wall eene Operations Using this system
28. tch the unit from on to standby mode or 9 TV indicator vice versa In standby mode the unit is still Lights green when the TV is the audio source consuming a small amount of power BD DVD indicator 2 Adjust the volume of this system gt p 15 Lights amber when the device connected to the 3 Select the input source gt p 15 BD DVD terminal is the audio source TV BD DVD Q3 Bluetooth Bluetooth indicator T Lights amber when the Bluetooth device is the 4 Select the Bluetooth device as the source audio source p 15 6 Sound mode indicators B CLEAR VOICE indicator Lights amber when clear voice is the current sound mode SURROUND indicator Lights amber when surround is the current sound mode 7 Remote control signal sensor 2 p 7 i This system Rear 8 AC power supply cord gt p 8 11 AUDIO IN terminal gt p 8 9 Wall mounting hole 12 MULTI ANGLE switch e p 12 13 10 OPTICAL DIGITAL AUDIO IN terminal gt p 8 Switch the audio quality according to the placement method of the main unit x1 The indicators will also blink in various conditions p 20 x2 For service use only 6 VQT5J41 a Remote control WON E Before using for the first time Remove the insulation sheet SURROUND INPUT CQ Ae B To replace a button type battery Battery type CR2025 Lithium battery ov 2 z e tn Turn the main unit on or off 2 p 15 Turn the s
29. the main unit further away from the TV If the TV still does not function correctly try using it in a rack or in the wall mount position 3 s E 7 57 7 0 W Ifthe TV s remote control sensor is blocked by the main unit Try using the TV s remote control from a different angle LA Do not use the main unit in a metal cabinet e f irregular coloring occurs on your TV turn the TV off for about 30 minutes If it persists move the main unit further away from the TV Keep magnetized items away Magnetized cards watches etc can be damaged if placed too close to the main unit Keep the main unit approximately 150 mm 6 away from the TV VQT5J41 1 1 i When placing the main unit on a rack or on a table Additionally required accessories commercially available Fall prevention COND iier tet Ree Maven Fin de dee e pP RR RE DERE b dee usa ee PER uS x1 e Screw eye to attach the fall prevention cord sessssseeeeeneeennenneneen enne x1 Ll Use commercially available screws that are capable of supporting over 33 kg 73 Ibs Use a cord that is capable of supporting over 10 kg 22 Ibs with a diameter of about 2 mm 3 s2 m Slide the MULTI ANGLE switch to RACK TABLE TOP Press the AC power supply cord into the holder QO Cord x If the cord cannot be threaded through the holes try bending the cord in 2 locations about 5 mm 16 apart from the tip at an an
30. to turn this function off Bluetooth Pairing cannot be done Check the Bluetooth device condition The device cannot be connected The pairing of the device was unsuccessful or the registration has been replaced Try pairing the device again gt p 9 This system might be connected to a different device Disconnect the other device and try pairing the device again The device is connected but audio cannot be heard through this system For some built in Bluetooth devices you have to set the audio output to SC HTB8 manually Read the operating instructions for the device for details The sound is interrupted The device is out of the 10 m 33 ft communication range Bring the Bluetooth device closer to the main unit e Remove any obstacle between the main unit and the device Other devices that use the 2 4 GHz frequency band wireless router microwaves cordless phones etc are interfering Bring the Bluetooth device closer to the main unit and distance it from the other devices VQT5J41 1 7 o S S 9 Reference Sound No sound e Turn muting off gt p 15 Check the connections to the other device 9 p 8 Make sure that the received audio signal is compatible with this system gt p 21 Turn this system off and then on again e f the connections are correct there might be a problem with the cables Redo the connections with different cables
31. unit for more than 4 sec All the indicators will blink twice when this system is reset If this system does not operate as expected returning the settings to the factory defaults may solve the problem The remote control code will return to 1 when this system is returned to the factory preset To change the remote control code refer to page 16 General operation No power Insert the AC power supply cord securely 2 p 8 e f the indicators blink and the main unit turns off immediately after you have turned it on unplug the AC power supply cord and consult your dealer The remote control does not work properly The battery is depleted Replace it with a new one gt p 7 It is possible that the insulation sheet has not been removed Remove the insulation sheet gt p 7 t may be necessary to set the code of the remote control again after changing the battery of the remote control gt p 16 Use the remote control within the correct operation range p 7 The TV indicator blinks Unplug the AC power supply cord and consult your dealer If other indicators are also blinking be sure to inform your dealer of these indicators The main unit is automatically switched to standby mode Auto Power Down function is on The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx 2 hours Refer to page 16
32. urround effect on or off gt p 15 YQ OS Turn the clear voice effect on or off gt p 15 Select the input source p 15 Q_AE t TV BD DVD Q Bluetooth i Adjust the volume of this system gt p 15 Select the Bluetooth device as the source gt p 15 Mute the sound 2 p 15 e Set the button type battery with its mark facing upward E About remote control signal sensor The remote control signal sensor is located on the main unit e Use the remote control within the correct operation range Distance Within approx 7 m 23 ft directly in front Angle Approx 30 left and right Remote control signal sensor VQT5J41 7 Step 1 Connections e Turn off all equipment before connection and read the appropriate operating instructions Do not connect the AC power supply cord until all other connections are completed Connection with the TV e a G e e e D T DIGITAL M a D a p OPTICAL AUDIO IN OPTICAL OUT Q9 Optical digital audio cable When you use the optical digital audio cable insert the tip correctly into the terminal Do not bend the optical digital audio cable The optical input supports PCM only n Connection with other devices AUDIO OUT R L oc e g Blu ray Disc player H C m Q Audio cable BD DVD whit D gt
Download Pdf Manuals
Related Search