User manual for SC 03 and 04 controllers. Actec stand
Contents
1. Il Actec Ltd Access Control Solutions User manual for SC 03 and 04 controllers Actec stand alone controllers are simple and easy to use access control devices It suits best for single entrance protection It was designed for both indoor and outdoor use SC 03 and 04 are very convenient to install inside the company for single room access for apartment or a small office Though small in size and easy to install it will be a professional doorkeeper Q Only the 40 card tag holders will be allowed to enter Q It will let you know when the door is left open as the controller supports door contact Q You will be able to open the door from inside by pushing a button in the place that is convenient for you right near the door or at secretary s desk All controllers support Request To Exit button Q You can adjust the door open time that is convenient for your application a Astep by step learning program will make it easier for you to manage add or delete users the database and functions of the controllers Refer to the How to table The following is a step by step programming table of the controller Please have the master card ready to proceed Master card is the first card that was presented to controller after initial power up Please keep it in a safe place and note that master key is only used for programming and not for the entrance To program the controller simply present the master key to the controller the n2. the appropriate card was why it is necessary to keep deleted from the system records of all cards added to Then a red LED switches the controller Only one card on stand by mode can be deleted per session Program lock 1 Present master card three LED starts blinking alternately operating time times yellow green and red colors for how long 2 Present additional card not the lock will master to set the lock be open operating time Each next presentation will add Isec up to 31 Short beep and red LED 3 To finish programming present switches on controller in a master card stand by mode Program open 1 Present master card four times LED starts blinking alternately door time 2 Present additional card not green and red only available master to set the door open if door contact time First presentation is installed to increases the time to 5 sec let you know each next presentation will add when door is 5 sec up to 120 sec at 24 left open presentation 3 To finish programming present Short beep and red LED master card switches on controller in a stand by mode Addasecond 1 Present a master card six times 1 LED starts blinking master card alternately green and yellow 2 Present three times a card that 2 Each time you present a is not registered in the system and you want it to be a second master card card a short beep will sound After third presentation controller produce
3. s a long beep simultaneously with green LED for 0 5sec second master card has been added 3 Then controller switches to a stand by mode RED led is on
4. umber of times that is appropriate to your operation upon the How to table It is very important to keep records of the user cards in the database please fill in the table in the appendix 1 to the user manual The controller switches back to stand by mode if no actions were undertaken within 15 seconds so to finish programming simply wait 15 seconds Please note the following indications of the controller while in the program mode Indications Meaning A short single beep The card has been read A long single beep The process has been successful A short triple beep You have presented a wrong card A long triple beep Is a warning make sure you really want to proceed with this action How to table How to Operations Indication Add User 1 Present master card once 1 Short beep and a green several users LED starts blinking 2 Present a user card tag 2 0 5 sec long beep and green LED is on for the same time To add several cards simply card has been added present them one after another 3 To finish programming present 3 Short beep and red LED master card or wait 15 second switches on controller in a Please keep records of all cards stand by mode added Delete User 1 Present master card twice 1 Red LED starts blinking 2 Present a user card that was 0 5 sec long beep and green added before the card that you LED is on for the same time want to be deleted That is
Download Pdf Manuals
Related Search