Home
PRODUCT SPECIFICATION
Contents
1. Item Condition Note Specification Nominal 1500 mAh Crom 2 1 Capacity Std charge discharge Minimum 1400 mAh Coun 2 2 Nominal Voltage Average for Std discharge 3 65V 2 3 Energy Density Std charge discharge 320 Wh L 2 4 1 Standard Charge Constant current 750mA Refer to 4 1 1 Constant voltage 4 2V End condition Cut off 50mA 2 4 2 Fast charge Constant current 4000mA Refer to 4 1 3 Constant voltage 4 2V End condition Cut off 100mA 2 5 Max Charge Voltage 4 2V 2 6 Max Charge Current 4000mA 2 7 1 Standard Discharge Constant current 300mA Refer to 4 1 2 End voltage Cut off 2 0V 2 7 2 Fast Discharge Constant current 10000mA 20000mA Refer to 4 1 3 End voltage Cut off 2 0V 2 8 Max Discharge Current For continuous discharge 30000mA 2 9 Weight Max 48 0 g 2 10 Operating Temperature Charge 0 50 C Cell Surface Temperature Discharge 20 75 C 2 11 Storage Temperature 1 month 20 60 C for shipping state 3 month 20 45 C 1 year 20 20 C 4 9 Reference 4 1V with 90 capacity PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev5 2012 06 14 5 3 Appearance and Dimension 3 1 Appearance There shall be no such defects as deep scratch crack rust discoloration or leakage which may adversely affect the commercial value of the cell 3 2 Dimension Diameter 18 3 0 1 0 3 mm Max 18 4 mm
2. 4 5 Safety Specification Item Condition Specification Cells are discharged per 4 1 2 then charged at constant 4 5 1 current of 3 times the max charge condition and Overcharge Test constant voltage of 4 2V while tapering the charge current Charging is continued for 7 hours Per UL1642 No explode No fire 4 5 2 Cells are charged per 4 1 1 and the positive and External Short negative terminal is connected by a 100m Q wire for 1 No explode No fire Circuiting Test hour Per UL1642 4 5 3 Cells are discharged at constant current of 0 2C to Overdischarge No explode No fire Tes 250 of the minimum capacity es 7 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev5 Cells are charged per 4 1 1 and heated in a circulating 4 5 4 air oven at a rate of 5 C per minute to 130 C At 130 C Heating Test oven is to remain for 10 minutes before test is discontinued Per UL 1642 Date 2012 06 14 5 Ed lt No explode No fire Cells charged per 4 1 1 are impacted with their crushing apparatus Per UL1642 4 5 5 longitudinal axis parallel to the flat surface and No explode No fire Impact Test perpendicular to the longitudinal axis of the 15 8mm diameter bar Per UL1642 m Cells charged per 4 1 1 are crushed with their a longitudinal axis parallel to the flat surface of the No explode No fire Cru
3. Ed lt Contents RG NU MS Me e ea a E E ea cnc 1 General Information e n 1 1 Scope 1 2 Application 1 3 Product Classification 1 4 Model Name 2 Nominal Specification EE 2 1 Capacity 2 2 Nominal Voltage 2 3 Energy Density 2 4 1 Standard Charge 2 4 2 Fast Charge 2 5 Max Charge Voltage 2 6 Max Charge Current 2 7 1 Standard Discharge 2 7 2 Fast Discharge 2 8 Max Discharge Current 2 9 Weight 2 10 Operating Temperature 2 11 Storage Temperature for shipping state 3 Appearance and Dimension nnn 5 3 1 Appearance 3 2 Dimension 4 Performance Specification ssssessessssssssssssssseseeeeeeeeeennnnnnenn nnn 4 1 Standard Test Condition 4 2 Electrical Specification 4 3 Environmental Specification 4 4 Mechanical Specification 4 5 Safety Specification 5 Cautions and Prohibitions in Handling seeeeeeeeeeeeeeeeeees 8 3 9 LG Chem Description Lithium Ion ICR18650 HB2 1500mAh 1 General Information 1 1 Scope PRODUCT SPECIFICATION CONFIDENTIAL Document No BCY PS HB2 Rev5 Date 2012 06 14 5 Ed lt This product specification defines the requirements of the rechargeable lithium ion battery to be supplied to the Customer by LG Chem 1 2 Application 1 3 Product classification 1 4 Model name 2 Nominal Specification Power Tools Cylindrical rechargeable lithium ion battery ICR18650HB2
4. Diameter is defined as the largest data value measured on the A area of a cylindrical cell Height f 65 0 0 2mm Max 65 2 mm A Max 18 4mm 4 Performance Specification 4 1 Standard test condition 4 1 1 Standard Charge Unless otherwise specified Standard Charge shall consist of charging at constant current of 750mA The cell shall then be charged at constant voltage of 4 2V while tapering the charge current Charging shall be terminated when the charging current has tapered to 50mA For test purposes charging shall be performed at 23 C 2 C 4 1 2 Standard Discharge Standard Discharge shall consist of discharging at a constant current of 300mA to 2 0V Discharging is to be performed at 23 C 2 C unless otherwise noted such as capacity versus temperature 4 1 3 Fast Charge discharge condition Cells shall be charged at constant current of 4000mA to 4 2V with end current of 100mA Cells shall be discharged at constant current of 10000mA and 20000mA to 2 0V Cells are to rest 10 minutes after charge and 30 minutes after discharge 5 9 LG Chem Lithium Ion ICR18650 HB2 1500mAh Description 4 2 Electrical Specification CONFIDENTIAL Document No BCY PS HB2 Rev5 PRODUCT SPECIFICATION Date 2012 06 14 5 Ed lt Item Condition Specification 4 2 1 Initial AC Impedance Cell shall be measured at 1kHz after charge per 4 1 1 lt 20 mQ wit
5. NTIAL Description Document No Date Rev Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev5 2012 06 14 5 Prohibitions Donotuse different charger Do not use cigarette jacks in cars for charging e Do not charge with constant current more than maximum charge current e Do not disassemble or reconstruct the battery e Do not throw or cause impact e Do not pierce a hole in the battery with sharp things such as nail knife pencil drill e Do not use with other batteries or cells e Do not solder on battery directly e Donot press the battery with overload in manufacturing process especially ultrasonic welding e Do not use old and new cells together for packing e Do not expose the battery to high heat such as fire e Do not put the battery into a microwave or high pressure container e Do not use the battery reversed e Do not connect positive and negative with conductive materials such as metal wire e Do not allow the battery to be immerged in or wetted with water or sea water 9 9
6. PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Document No Date Rev Description 2012 06 14 5 Lithium lon ICR18650HB2 1500mAh BCY PS HB2 Rev5 PRODUCT SPECIFICATION Rechargeable Lithium lon Battery Model ICR18650HB2 1500mAh LG Chem 20 YOIDO DONG YOUNGDUNGPO GU SEOUL 150 721 KOREA TEL 82 2 3773 1114 FAX 82 2 3773 7005 http www lgchem com Description LG Chem Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev5 2012 06 14 Revision History PRODUCT SPECIFICATION CONFIDENTIAL Document No Date Rev 5 Revision Date Originator Description 0 2010 03 11 Oh Kyung Su Original Release Definitions of standard charge discharge and fast 1 2010 05 07 Oh Kyung Su charge discharge were corrected Measurement of recovery capacity was corrected Definition of fast charge discharge was corrected 2 2011 02 18 Kim Hyoung Kwon Condition of cycle life was corrected 3 2011 04 18 Kim Hyoung Kwon Operating Temperatures were changed Kim Sungjong Energy density was added 4 2012 03 19 Cell surface temperature was added 4 1V with 90 capacity was added 5 2012 06 14 Kim Sungjong High temperature and high humidity test were eliminated because of duplicate in 4 3 2 2 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev5 2012 06 14 5
7. g Capacity After storage cells shall be discharged with standard condition 4 1 2 to measure the remaining capacity Recovery Capacity After storage cells shall be discharged with standard discharge condition 4 1 2 and then cells shall be charged with standard charge condition 4 1 1 and then discharged with standard discharge condition 4 1 2 This charge discharge cycle shall be repeated three times to measure the recovery capacity 6 9 LG Chem Lithium Ion ICR18650 HB2 1500mAh Description CONFIDENTIAL Document No BCY PS HB2 Rev5 PRODUCT SPECIFICATION Date 2012 06 14 5 Ed lt 4 3 5 Cells shall be charged per 4 1 1 at 23 C 2 C Temperature and discharged per 4 1 2 at the following Dependency of temperatures Capacity Charge Discharge Capacity 10 60 of Cini 0c 80 of Cini 23 C 23 C 100 of Cini 60 C 95 of Cini 4 4 Mechanical Specification Item Condition Specification 4 4 1 Cells charged per 4 1 1 are dropped onto an oak board No leakage Drop Test from 1 meter height for 1 cycle 2 drops from each cell No temperature rising terminal and 1 drop from side of cell Total number of drops 3 4 4 2 Cells charged per 4 1 1 are vibrated for 90 minutes per No leakage Vibration Test each of the three mutually perpendicular axes x y Z with total excursion of 0 8mm frequency of 10Hz to 55Hz and sweep of 1Hz change per minute
8. hout PTC 4 2 2 Initial Capacity Cini Cells shall be charged per 4 1 1 and discharged per 4 1 2 within 1h after full charge Cini 1400 mAh Crin 4 2 3 Cycle Life Cells shall be charged and discharged per 4 1 3 400cycles 10A and 250 cycles 204 A cycle is defined as one charge and one discharge 401 10A and 251 20A discharge capacity shall be measured per 4 1 1 and 4 1 2 gt 60 of Cin in 2 1 4 3 Environmental specification Item Condition Specification 4 3 1 Storage Characteristics Cells shall be charged per 4 1 1 and stored in a temperature controlled environment at 23 C 2 C for 30 days After storage cells shall be discharged per 4 1 2 to obtain the remaining capacity Capacity remaining rate 90 Cini in 2 1 4 3 2 High Temperature Cells shall be charged per 4 1 1 and stored in a temperature controlled environment at 60 C for No leakage Capacity recovery rate Thermal Shock Test with cells charged per 4 1 1 After test cells are discharged per 4 1 2 and cycled per 4 1 1 and 4 1 2 for 3 cycles to obtain recovered capacity Storage Test 1 week After storage cells shall be discharged 80 of Cini per 4 1 2 and cycled per 4 1 1 and 4 1 2 for 3 cycles to obtain recovered capacity 4 3 4 65 C 8h 3hrs 20 C 8h for 8 cycles No leakage IV Capacity recovery rate 80 of Cini Remainin
9. sh Test 5 Caution and Prohibition in Handling Warning for using the lithium ion rechargeable battery Mishandling of the battery may cause heat fire and deterioration in performance Be sure to observe the following Caution e When using the application equipped with the battery refer to the user s manual before usage e Please read the specific charger manual before charging e Charge time should not be longer than specified in the manual e When the cell is not charged after long exposure to the charger discontinue charging e Battery must be charged at operating temperature range 0 50 C e Battery must be discharged at operating temperature cell surface temperature range 20 75 Please check the positive and negative direction before packing e When a lead plate or wire is connected to the cell for packing check out insulation not to short circuit e Battery must be stored separately e Battery must be stored in a dry area with low temperature for long term storage e Do not place the battery in direct sunlight or heat Donotuse the battery in high static energy environment where the protection device can be damaged e When rust or smell is detected on first use please return the product to the seller immediately e The battery must be away from children or pets e Whencell life span shortens after long usage please exchange to new cells 8 9 PRODUCT SPECIFICATION LG Chem CONFIDE
Download Pdf Manuals
Related Search
Related Contents
POLYTRON® System PT 2500 E Manuel d`utilisation English WEEE Warning Message FCC STATEMENT Home Owners Guide Table de cuisson Cooking hob Placa de cocción Placa de Formation mode d`emploi.pub - Aveyron bio, promotion de l Copyright © All rights reserved.
Failed to retrieve file