Getting Started with the Walk-and
Contents
1. it is aligned Select the Projection icon on the right side of your board This will bring up a series of boxes Touch the corners of each box to align your screen Then you are ready to go BOARD BASICS Touch the button on the left side of your board to open up a blank screen Use this screen to take notes during your interactive lesson You will return to this same page each time you hit this button Use the gt button after you have opened a blank screen to return to the original page you were working on Select the Show Board icon to toggle between a cursor and a pen Select your pen color or eraser using the buttons on the left Since you have configured your Save As option when you select Save an image of your screen will save in the file you designated For more information you will also find a user s manual in the PolyVision folder in your Programs file2. PolyVision Interactive Whiteboard Basics For more information and lesson plans please check out http polyvision wikispaces com CONNECTING YOUR BOARD 1 In order for your board to be interactive you will need to connect two cables to your laptop First attach the projection cable This is the large black cable with blue connection ends One end will plug into the wall port located near the desktop computer in your room The other will i connect to the left side of your laptop 2 Next attach the computer to the whiteboard using one of the USB ports on the laptop This is the cable that runs from your projector through the ceiling and dangles from the ceiling somewhere near the desktop computer in your room 3 Turn on projector using your remote You should see your computer screen come up on the interactive board If not you may need to hit Source Search on your white remote CONFIGURING THE WHITEBOARD 1 You can either use the buttons located on the left side of your board or an on screen remote to work your interactive board First you will need to make sure that you configure your board 2 Step 1 Make sure the PolyVision Walk and Talk software is on In the lower right corner of your screen you should see an icon that looks like a white screen You can configure this program by right clicking on the icon and selecting Configure Walk and Talk If the icon is not in your system tray in the lower right a l c
3. orner you can turn the application on by clicking on Start O E then Programs and selecting Polyvision from your list of Axed propector remember last signent programs ae Red meten roncue 3 By selecting Configure Walk and Talk a pop up menu will F panay arches appear Select Projection from the tabs at the top of the Desitep detvincow sce ana pop up menu 4 Change the Alignment Points to 16 points and check off the box for Fixed Projector Then select Apply at the bottom ees Bes of the menu You will need to align your board after you have finished configuring your options 5 Next select the Save button and click the pop up menu next to Save File As Select the file type you want for all screen shots that are saved by the board Ajpgisa good choice for most projects you might use the images for You will want to change where the image is saved to since the default is to save it to your desktop which we cannot do Click on the Browse button and change this option to your personal folder on the server You may want to create a new folder just for images you save from your PolyVision projects Savainapad i600 Saree bo dracio CiDocumencs and Seting e Browse D Sse POF files inlands Restore Defaults i Helo cea 6 To set your selections click OK Now you will need to configure your board in order to make sure
Download Pdf Manuals
Related Search