User Manual
Contents
1. A warning will display asking Are You Sure for the reasons listed Clear Check Engine Codes Are You Sure Yes This will happen Trouble codes are erased Stored Freeze Frame Data is erased All Oxygen Sensor Test Data is erased The Check Engine Light is turned Off All Internal Calibration Data returns to Default values Afterwards The vehicle may run different while it OBDII Adapter Reset Cancel All rights reserved Copyright 2011 Richard Strickland Every effort is made to verify the accuracy of information provided in the document but no representation or warranty can be given and no liability assumed by Richard Strickland with respect to the accuracy and or use of any products or information described in this document Richard Strickland reserves the right to make changes to the software and or hardware described in this document in order to improve reliability function or design Android is a trademark of Google Corporation2. on by the On Board Computer in your vehicle Click Menu More and Click Search for Trouble Codes You can also see if there are any pending Diagnostic Trouble Codes that would not turn on the Check Engine Light y LR 100 a Trouble Codes P0100 Mass or Volume Air Show Parameters Flow Circuit P0200 Injector Circuit Open Search for Trouble Codes j Trouble Codes Cleared P0300 Random Multiple Cylinder Misfire Detected Select Car Adapter Reset Car Adapter Clear Check Engine Light Reset Elm327 Adapter If you have trouble linking to another vehicle after using the application and adapter on a different vehicle then sometimes it s helpful to issue a reset command to the Elm327 adapter Just Click on Menu More then Click on Reset Car Adapter to issue the command If there are no Trouble Codes Then the message No Trouble Codes Found will be displayed Clear Trouble Codes To clear Trouble Codes and turn Off the Check Engine Light Click Menu More and Click Clear Check Engine Light Show Par ter Reset Car Bluetooth o arameters Adapter Search for Trouble Codes Are you sure Cancel Show Parameters Select Car Adapter Search for Trouble Codes Reset Car Adapter Select Car Adapter Clear Check Engine Light Reset Car Adapter If you are sure then Click Yes and a message will be displayed once confirmation Clear Check Engine Light has been received
3. DRIVE Transmission Temperature Gauge An Android Smart Phone Application By Richard Strickland Transmission Temperature Gauge For Android Smart Phones By Richard Strickland USER MANUAL Version 1 1 www drive02 com For use with 1996 to Current Year Vehicles Ford Lincoln Mercury GM Chevrolet Chrysler Dodge Jeep 2007 to Current Year Toyota Trucks 2009 to Current Year Android Smart Phones Version 2 1 or newer Made in the USA WARNING Vehicle operator should focus primary attention to the road while using DRIVE The information provided by this device should be observed as part of a normal sequence of observations performed in the operation of the vehicle as with any gauge or other instrumentation DRIVE settings should be changed only during conditions when it is safe to do SO Focusing on the road should be the primary concern of the driver Richard Strickland shall not be held liable in any way for any incidental or consequential damages to the vehicle driver passengers and or other involved parties or property occurring while using DRIVE Richard Strickland shall not be liable for technical or editorial errors or omissions made herein nor for incidental or consequential damages resulting from the furnishing or use of this manual Richard Strickland reserves the right to make changes to this document and the product described without notice Copyright 2011 Richard Strickland All rights res
4. E Chrysler Dodge Jeep V6 V8 IL est 2007 Close Link More View Parameters Saved Menu Parameters can be view by the Menu More Show Parameters a Parameters E Parameters Cool_Air false Digital_Color 3355444 Alert_Set 295 Search for Trouble Codes Bluetooth CHX Transmission Chrysler Dodge Jeep V6 V8 2007 Version 1 00 Select Car Adapter Reset Car Adapter Clear Check Engine Light Parameter Definitions Cool_Air If the Coolant amp Intake Air temperature is displayed Digital Color The RGB color code for the Digital Display Alert_Set The set point temperature for Overheat Alert Bluetooth The Elm327 Bluetooth adapter name Transmission The transmission selected Version The version of DRIVE installed Running the DRIVE application Once you have gone thru all the previous settings the application is now ready to Link connect and run From the main gauge screen you should see a Link button To begin reading the transmission temperature follow these steps e Plug Adapter into vehicle OBD I plug e Switch On Ignition or Start vehicle either one will work e Click Link button on DRIVE application Click Start the adapter will analyze the type of communication the vehicle uses so it may take a few seconds to initially connect and read the transmission data Note Some Chrysler Dodge Jeep vehicles use the radiator coolant sensor instead of the transmission sensor whil
5. default settings screen of the device You are being redirected to Settings lt Instructions gt 1 Click Bluetooth v to Enable To exit Settings Click hardware key lt Bluetooth Device name Discoverable Scan for devices Bluetooth devices Check Bluetooth to Enable Then press the Hardware Back key lt to return to DRIVE You are being redirected to Settings lt Instructions gt Plug Adapter Into Car 1 Click on Scan For Devices 2 After Device Found Click on it to Pair Setup 3 The PIN usually is 0000 or 6789 or check adapter info 4 Paired but not connected Setup Complete To exit Settings Click hardware key lt pes 3 Bluetooth settings Bluetooth Device name Discoverable Click Scan for Devices 1 will 3 02 PM Bluetooth settings Bluetooth Device name Discoverable Scan for devices Bluetooth devices CHX After found Click Pair with this Device Bluetooth pairing request Type PIN to pair with CHX Try 0000 or 1234 Click on empty box to bring up the Keyboard A E Bluetooth pairing request IYPE FLIN W pail WIU CAA Try 0000 or 1234 Enter number then Click OK Please follow the instructions Bluetooth Settings Continued You should now see Paired but not Connected R 8 3 03 PM Bluetooth settings Bluetooth Device name Discoverable Make dev
6. e in Park or Neutral When the transmission is shifted to Drive it will read the transmission sensor Turning Off the Ignition While running DRIVE if you turn off the ignition the program will go to standby and check every 30 secs for the ignition to come back on Once ignition is on the program will resume within the 30 sec window The Start button is available too If you are finished with DRIVE just go to the Menu and click Close Link to disconnect from the Bluetooth adapter Ignition Off Display Coolant and Air Intake Temperatures To enable disable the display of Coolant and Air Intake Temperatures Click Menu and then Click Coolant and Air On Off A colored tick will display on the gauge indicating the corresponding temperature as well as a digital readout A a Coolant amp Air On Off _ Set Alert Point ara r O F Select Transmission Set Digital Color Go see Close Link More Change Digital Color To change the color of the Transmission Digital Display Click Menu then Click Set Digital Color to pick the color you like Choose Digital Number 4 Color Coolant amp Air On Off Set Alert Point 4 r NS f Select Transmission Set Digital Color LE GA eee Close Link More Trouble Codes gt If you are sure then Click Yes and a message will be displayed once confirmation has been received To see why the Check Engine Light was turned
7. erved Application Description Drive is an Android application that allows users to read the Transmission Temperature in real time of their vehicle utilizing a wireless adapter It also displays coolant temp and intake air temperature as well as any Check Engine trouble codes with descriptions and the ability to erase those codes The application requires an adapter called the Elm327 OBDII Bluetooth adapter easily found on eBay and other sites for connecting to the vehicles OBDII diagnostic plug found inside the vehicle The OBDII plug in the vehicle will be within 3 feet of the steering wheel The application requires Android 2 1 or higher on the device in order to use the Bluetooth functionality Currently these vehicles are supported Ford Lincoln Mercury 1996 Current GM Chevrolet 1996 Current Chrysler Dodge Jeep 2007 Current Toyota Trucks 2009 Current more models in the future Diesel vehicles are not supported Diagram A NB Eee een PJEOQNS Ip LE OS Sse 4 M E 7 a NE AP S gt Fetes F _ ial Les AARRE FT e y The OBD Il Connector s shape is easy to identify OBD Il Connector Location Usually just below the dashboard DRIVE Application Connects to Adapter Elm327 Adapter plugs into the OBD II plug Features e Real time Transmission Temperature Meter e Additional Coolant and Intake Air Temperature shown on Screen e Alert set p
8. ice discoverable Scan for devices Bluetooth devices CHX Paired but not connected Then press the Hardware Back key lt to return to DRIVE Click Menu on the screen or MENU on the Android device then Click More to see the extended Menu and Click Select Car Adapter Show Parameters Choose Car Adapter Press lt to Cancel Search for Trouble Codes CHX Select Car Adapter Reset Car Adapter Clear Check Engine Light The selection will be saved Setting the Transmission Alert Point To set the temperature that will display an alert for overheat Click Menu then Click Set Alert Point en f oO Select Transmission Set Digital Color P eeg Close Link More The alert temperature will be saved When the transmission temperature is over the Alert set point then the Alert will display and flash red until the temperature drops below the set point gt Transmission Selection Click Menu on the screen or MENU on the Android device then Click Select Transmission Scroll the list to find your Transmission some will have ll as an alternate to use if the first does not work The selection will be saved Choose Transmission Ford All GM 2007 GM 2007 II GM up to 2006 FEPNA xL Coolant amp Air On Off Set Alert Point GM up to 2006 II al VAR P oe Jeep Wrangler 2007 Select Transmission Set Digital Color S
9. oint for Transmission Temperature Overheat e Analog and Digital readout for Transmission Temperature e Transmission Temperature Digital Color Selection e Check Engine code readout and description e Check Engine Trouble Code Erase e Use in Portrait or Landscape Orientation The application will then check to see if any Elm Bluetooth adapters have been setup if not you will be re directed to the Bluetooth settings screen Here is where the android device will find the Elm Bluetooth adapter and store the settings Setting up the DRIVE application Select o DRIVE from the program list on the Android device 3 5 al 3 22 PM All programs E Go B M v al P Gmail Go gieMap GN HTC Mobile I Guide Int e Ma p JAA M a 74 sf aps Phone To begin DRIVE you are presented with the Terms of Use agreement Terms of Use You assume all risk and liability of using DRIVE in your vehicle Please arrange all wireless devices and cables for use of DRIVE in a secure manner in your vehicle so that they will Not interfere with your driving Please use this product only when safe to do so AND only change data while your car is Parked By using DRIVE you agree To these Terms of Use Accept You can either Accept or Exit Upon accepting the Terms of Use the application will check the device to see if the Bluetooth setting is enabled If not you will be re directed to the
Download Pdf Manuals
Related Search