Wind `N Go® Vers-A-Light #7820
Contents
1. H POWER DURATION 3 Red LED OPERATING INSTRUCTIONS Low High steady SOS After winding for 2 3 40 minutes 15 minutes 30 minutes 60 minutes minutes a oe ee ee Using either the USB 12V or 10 hours 2 Y hours 12 hours 18 hours 120V power adapter to fully charge approx 5 hours After winding for 3 minutes CELL PHONE CHARGING J Up to 5 minutes of emergency talk time Longer talk times may be achieved with additional winding PEGASUS ATHENA BRANDS LIGHTING An Aervoe Industries Inc Company Distributed by www PegasusLighting com 800 392 4818 7820inst cs9 092. the DC IN OUT port of the unit and the other end into your cell phone This tip fits most Nokia phones If this tip does not match your cell phone Cell Phone Adapter Kit 7995 is available from Athena Brands and includes additional adapter tips to match your specific phone Go to www athenabrands com for a list of phones supported by this kit 2 Rotate the HAND CRANK as described in Dynamo Charging above to generate power to your cell phone Longer talk time may be achieved with additional winding HANGING 1 The handle folds out from the body of the light and may be used to grip it like a flashlight 2 The handle may also be detached so that it may be hung on large diameter pole or tree branch Pull outward at the swivel point to detach it from the body of the light 3 A hook folds out from the handle to hang from a string line or other small diameter object MAGNETS There are three magnets on the back of the light that may be used to attach it to a car or other metal object for hands free illumination TECHNICAL INFORMATION SPECIFICATIONS INTERNAL RECHARGEABLE BATTERY Ni Mh 3 6V 800 mAh USB INPUT 5V DC DC OUTPUT 5 6V DC AUXILIARY CHARGING METHOD 120V AC Power Adapter ap not included Input 120V AC 50 60 Hz Vers ys ZL g he Output 6V DC 300 mA Power Adapter Kit 7991 available at 12V DC Power Adapter www athenabrands com Input 12V DC Output 6V DC 300 mA Center positive polarity WEG fee DIMENSIONS 3 9 Lx 1 6
3. Wind N Go Vers A Light 7820 IMPORTANT SAFEGUARDS Read all instructions before operating Do not look directly at the light may cause injury to your eyes Do not use in flammable or explosive environments Do not operate at temperatures above 120 F or below 32 F To reduce the risk of electric shock do not submerge the unit or its accessories in any liquid Unit is water resistant but not waterproof This unit is not intended for use in explosive atmospheres or locations Turn off all lights before charging Store in a clean dry place when not in use Do not use alcohol flammable or other solvents on or near this unit Only clean with warm water and soft cloth Protect LED lens from damage and scratching Administer close supervision when using around children PARTS IDENTIFICATION Fan Battery Compartment Charging Indicator n 4 On Off Button DC In Out Port Ha A Hanging Hook Removeable Handle f Distributed by PEGASUS LIGHTING www PegasusLighting com 800 392 4818 CHARGING THE UNIT Before charging turn off the light The battery is rechargeable but may be replaced if needed Use a small Phillips head screwdriver to remove the single screw securing the BATTERY COMPARTMENT Replace the battery with an identical 3 6V 800 mA Ni Mh battery Dynamo Charging 1 Open the HAND CRANK and rotate clockwise at a
4. pproximately 120 cycles minute for a minimum of one minute Winding for a longer period of time will yield longer power durations 2 The charging indicator on the light will illuminate red during charging and turn green once charging is complete 3 Close the HAND CRANK USB Charging 1 Using the included USB charging cable plug the USB end into a computer or other USB charging device and the male end into the DC IN OUT PORT of the light 2 The Red charging indicator on the light will illuminate during charging and change to green once charging is complete 120V OR 12V Charging adapter not included 1 A Power Adapter Kit 7991 is available from Athena Brands and includes a 120V wall charger and a 12V car charger Refer to the information under Technical Information for specifications 2 Plug the DC output plug from either adapter into the DC IN OUT PORT of the unit and then plug the 120V AC or the 12V DC adapter into the appropriate electrical socket depending on which charger is being used 3 The charging indicator on the light will illuminate red during charging and change to green once charging is complete Allow 5 hours to achieve a full charge LIGHT OPERATION Press the ON OFF button 1 time for low level light 2 times for high level light 3 times for 3 red LEDs in a steady light 4 times for 3 red LEDs blinking an S 0 S message 5 times for off CELL PHONE CHARGING 1 Plug one end of the adapter cable into
Download Pdf Manuals
Related Search