Home
        USER`S MANUAL
         Contents
1.    P Nerchamack   Wih Universal ok A SR 7000    Model No  NTEL00907 0    Serial No  USER S MANUAL    Write the serial number in the  space above for reference     CH    Serial Number  Decal       QUESTIONS     As a manufacturer  we are commit   ted to providing complete customer  satisfaction  If you have questions   or if parts are damaged or missing   PLEASE DO NOT CONTACT THE  STORE  please contact  Customer Care     IMPORTANT  You must note the  product model number and serial  number  see the drawing above   before contacting us     CALL TOLL FREE     1 888 825 2588    Mon  Fri  6 a m    6 p m  MST  Sat  8 a m  4 p m  MST    ON THE WEB   www nordictrackservice com    44 CAUTION        Visit our website at    O  www nordictrack com    Read all precautions and instruc   tions in this manual before using  this equipment  Keep this manu     al for future reference  new products  prizes     iPod    fitness tips  and much more        TABLE OF CONTENTS    WARNING DECAL PLACEMENT    2  IMPORTANT PRECAUTIONS spesie 004  4 uesed eee teak a EEO Yea Ede EERE 3  BEFORE YOU BEGIN  spora a daar te bee dee eee ea wa Rata dela awe a eed 4  ASSEMBLY gic oven Boe RE ede Cee See eed A 5  HOW TO USE THE ELLIPTICAL EXERCISER           0 00 0 13  MAINTENANCE AND TROUBLESHOOTING i    25  EXERCISE    GUIDELINES  ss 00 gna aot a I ARE va eae I ARES He Ae Ra 26  PART LIST sui e a A teres iden ete RAR dee EWG dee bea 28  EXPLODED DRAWING seno ceca rare daa Rede eae Rega ee Enel aa cede eed A a wae 
2.   While a second person tips the Frame  1  for   ward  attach the Rear Stabilizer  2  with four  M10 x 58mm Bolts  84  and four M10 Hex Nylon  Locknuts  103   Tip  To prevent squeaking  do  not overtighten the Bolts     Cut and remove the wire tie that holds the Link  Tube  30  inside the left Link Arm  25   Leave  the Link Tube inside the left Link Arm and then  position the Left Pedal Leg  24  and the left Link  Arm as shown     Apply a small amount of the included grease to  a Barrel Nut  76   Insert the Barrel Nut through  the indicated holes in the Left Pedal Leg  24   and the left Link Arm  25   Then  insert the  Barrel Nut through the Link Tube  30  inside the  left Link Arm     Tighten an M6 x 14mm Flat Head Screw  75   into the Barrel Nut  76            9     10     Insert the axle of the Roller  27  through the  right Link Arm  25   make sure that the Roller  is on the inner side of the Link Arm  Attach  the Roller with an M10 x 15mm Patch Screw   77  and an M10 x 22mm x 1 5mm Washer   100   Tip  Use a wrench to hold the axle of  the Roller firmly in place while you tighten  the Patch Screw into the axle     Repeat this step to attach the other Roller   not shown  to the left Link Arm  25      Orient a Pedal  26  as shown  Attach the Pedal  to the bracket on the Left Pedal Leg  24  with  two M8 x 55mm Patch Screws  115  and two  M8 Hex Nylon Locknuts  80      Repeat this step to attach the other Pedal   26         10    11  Orient the Ramp Cover  7  as shown  Insert
3.  See step 4 on page 16    Measure your heart rate if desired     See step 5 on page 17     When you are finished exercising  the console  will turn off automatically     See step 6 on page 17     HOW TO USE A CLASSIC WORKOUT    1     Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Select a classic workout     To select one of the  twenty classic  workouts  press the  Classic Workouts  button repeatedly  until the name of  the desired workout  appears in the dis   play  The workout time and a profile of the resis   tance levels for the workout will also appear in the  display     Profile       Begin pedaling to start the workout     Each workout is divided into 20  30  or 45 one   minute segments  One resistance level and one  target rpm  pace  setting are programmed for each  segment  Note  The same resistance and or target  rpm setting may be programmed for consecutive  segments     The resistance level and the target rpm for the first  segment will appear in the center of the display for  a few seconds  During the workout  the workout  profile will show your progress  see the drawing  above   The flashing segment of the profile repre   sents the current segment of the workout  The  height of the flashing segment indicates the resis   tance level for the current segment  At the end of  each segment of the workout  a series of tones will  sound and the next segme
4.  the  front edge of the Ramp Cover under the edge  of the Front Ramp Cover  66  and then press  the Ramp Cover onto the Ramp  55   Attach the  Ramp Cover with six  8 x  50  Screws  92      12  Remove the shipping bracket  not shown   inserted into the underside of the Frame  1    Discard the shipping bracket     While a second person tips the Frame  1  for   ward  tighten a Leveling Foot  9  into the under   side of the Frame        11    13  While a second person tips the elliptical exercis   er forward  attach the Rear Stabilizer Cover  17   to the Rear Stabilizer  2  with four  8 x 2   Screws  74         14  Make sure that all parts of the elliptical exerciser are properly tightened  Note  Some hardware may be  left over after assembly is completed  To protect the floor or carpet from damage  place a mat under the  elliptical exerciser     Plug the power cord into the power socket at the front of the elliptical exerciser  see HOW TO PLUG IN THE  POWER CORD on page 13   IMPORTANT  If the elliptical exerciser has been exposed to cold tempera   tures  allow it to warm to room temperature before plugging in the power cord  If you do not do this   the console displays or other electronic components may become damaged     12    HOW TO USE THE ELLIPTICAL EXERCISER    HOW TO PLUG IN THE POWER CORD    This product must be grounded  If it should mal   function or break down  grounding provides a path of  least resistance for electric current to reduce the risk  of electric shock  Th
5.  the age of 35 or  persons with pre existing health problems     It is the responsibility of the owner to ensure  that all users of the elliptical exerciser are  adequately informed of all precautions     Your elliptical exerciser is intended for home  use only  Do not use your elliptical exerciser  in a commercial  rental  or institutional set   ting     Keep your elliptical exerciser indoors  away  from moisture and dust  Place your elliptical  exerciser on a level surface  with a mat  beneath it to protect the floor or carpet   Make sure that there is enough clearance  around your elliptical exerciser to mount   dismount  and use it     Inspect and properly tighten all parts regu   larly  Replace any worn parts immediately     Keep children under age 12 and pets away  from your elliptical exerciser at all times     Your elliptical exerciser should not be used  by persons weighing more than 300 Ibs    136 kg      10     11     12     13     14     Wear appropriate exercise clothes when  exercising  do not wear loose clothes that  could become caught on your elliptical exer   ciser  Always wear athletic shoes for foot  protection     Hold the handgrip pulse sensor or the han   dlebars when mounting  dismounting  or  using your elliptical exerciser     Keep your back straight while using your  elliptical exerciser  do not arch your back     The pulse sensor is not a medical device   Various factors  including the user   s move   ment  may affect the accuracy of heart rate  re
6.  the workout  a series of tones will  sound and the next segment of the profile will  begin to flash  If a different resistance level and or  target rpm is programmed for the next segment   the resistance level and or the target rpm will flash  in the display for a few seconds to alert you  The  resistance of the pedals will then change        18    4     6     As you exercise   you will be prompt   ed to keep your  pedaling pace near  the target rpm set   ting for the current  segment  When an  upward pointing arrow appears in the display   increase your pace  When a downward pointing  arrow appears in the display  decrease your pace   When no arrows appear  maintain your current  pace     RPM       IMPORTANT  The target rpm settings are  intended only to provide motivation  Your actu   al pace may be slower than the target rpm set   tings  Make sure to pedal at a pace that is com   fortable for you     If the resistance level for the current segment is  too high or too low  you can manually override the  setting by pressing the Resistance buttons   IMPORTANT  When the current segment of the  workout ends  the pedals will automatically  adjust to the resistance level programmed for  the next segment     The workout will continue in this way until the last  segment ends  To stop the workout at any time   stop pedaling  A tone will sound and the time will  begin to flash in the display  To restart the workout   simply resume pedaling    Follow your progress with the display   
7. 30  ORDERING REPLACEMENT PARTS    Back Cover  LIMITED WARRANTY    Back Cover    WARNING DECAL PLACEMENT    The warning decals shown here have    been applied in the locations shown  If a AWARNING    decal is missing or illegible  call the    Misuse of this machine  telephone number on the front cover may result in serious    of this manual and request a free nye x     Read user s manual    replacement decal  Apply the decal in prior to use and follow       all warnings and  the location shown  Note  The decal instructions   may not be shown at actual size    Do not allow children     Pedals continue to  spin when you stop  pedaling     Spinning pedals can  cause injury     Reduce pedal speed  in a controlled manner     User weight must not  exceed 300 pounds     Replace label if  damaged  illegible  or    removed  RA    Keep hands and  fingers clear of  this area        NordicTrack is a registered trademark of ICON IP  Inc   iPod is a trademark of Apple Computer  Inc   registered in the U S  and other countries     2    IMPORTANT PRECAUTIONS    AWARNING  To reduce the risk of serious injury  read all important precautions and   instructions in this manual and all warnings on your elliptical exerciser before using your elliptical  exerciser  ICON assumes no responsibility for personal injury or property damage sustained by or  through the use of this product     1     Before beginning any exercise program   consult your physician  This is especially  important for persons over
8. Count the point total of your cards and tap the  screen to select a game option  You can choose to  HIT  STAND  or DOUBLE  Repeat this action as  necessary until the hand ends     When the hand ends  the result and the point  totals for you and the dealer will appear in a box  on the right side of the display  To continue the  game  tap the center of the screen     The game will continue in this way indefinitely or  until you have no credits available to bet  If you  have no credits to bet  the words GAME OVER  and the game time will appear in the display  To  play Blackjack again  tap the prompt box on the  screen  To exit the game at any time  press the  Black Jack button     Follow your progress with the display    While you pedal and play the Blackjack game  the  upper left corner of the display will show the  elapsed time  To view additional exercise informa   tion  press the Display Mode button repeatedly     When you are finished exercising  the console  will turn off automatically     See step 6 on page 17     HOW TO PLAY THE TEXAS HOLD    EM GAME    Texas Hold    Em is a popular poker game in which you  compete against other players to win credits  Your  objective is to form the best five card poker hand from  your two hole cards and the five community cards  shared by all the players  You will use the interactive  touch screen on the display to play the game  Follow  the steps below to play Texas Hold    Em    Note  For detailed instructions on how to play  Texas Ho
9. Each workout automatically changes the resistance of  the pedals and prompts you to vary your pedaling  pace as it guides you through an effective workout     The console also features four motivational interactive  games  Using the dual game controllers  play the chal   lenging Fat Blocker    game or the fast paced Calorie  Destroyer    game during your workouts    the harder  you exercise  the greater your advantage  Or  use your  wits and the interactive touch screen to win credits  while playing the classic card game of Blackjack or  Texas Hold    Em     15    The console also features the new iFIT Interactive  Workout System  The iFIT Interactive Workout System  is compatible with iFIT cards containing workouts  designed to help you achieve specific fitness goals   iFIT workouts control the resistance of the pedals while  the voice of a personal trainer coaches you and moti   vates you through your workout  One demo iF IT card is  included  Additional iFIT cards are available separately   To purchase   FIT cards  go to www iFIT com or call  the telephone number on the front cover of this  manual  iFIT cards are also available at select  stores     You can even listen to your favorite music or audio  books with the console   s stereo sound system while  you exercise  This product has been designed specifi   cally to work with iPod   and has been certified by the  developer to meet Apple performance standards     To use the manual mode of the console  follow the  steps beg
10. When you start the Calorie Destroyer game  a  game arena will appear in the display  Three rows  of drones will begin to move across the top of the  arena  periodically firing their lasers downward   Each time the drones reach the left or right side of  the arena  they will reverse direction and move  downward                             At the bottom of the arena is a laser blaster  You  can fire the laser blaster at the drones by pressing  the up button on either controller  In addition  while  you are pedaling  you can move the laser blaster  to the left or right using the left and right buttons  on either controller  The faster you pedal  the  faster the laser blaster will move        Between the drones and the laser blaster are five  shields  You can hide the laser blaster below a  shield if desired  However  each time a shield is hit  by a laser  a piece will be vaporized     Your goal is to keep the laser blaster from being  hit and to keep any drone from reaching the bot   tom of the arena  If the laser blaster is hit  it will be  disabled and another laser blaster will appear in its  place  there are a total of four laser blasters  If you  vaporize the entire squadron of drones  a new  squadron will appear     As you play  the drones will move faster and  faster  The game will continue until all four laser  blasters are disabled or a drone reaches the bot   tom of the arena     When the game ends  the display will show the  level of play that you reached and your fin
11. adings  The pulse sensor is intended only  as an exercise aid in determining heart rate  trends in general     When you stop exercising  allow the pedals  to slowly come to a stop     If you feel pain or dizziness while exercising   stop immediately and cool down     Use your elliptical exerciser only as  described in this manual     BEFORE YOU BEGIN    Thank you for selecting the revolutionary NordicTrack    ASR 1000 elliptical exerciser with Universal Dock for  iPod    The ASR 1000 elliptical exerciser provides a  wide array of features designed to make your work   outs at home more effective and enjoyable     For your benefit  read this manual carefully before  you use the elliptical exerciser  If you have ques   tions after reading this manual  please see the front    cover of this manual  To help us assist you  note the  product model number and serial number before con   tacting us  The model number and the location of the  serial number decal are shown on the front cover of  this manual     Before reading further  please familiarize yourself with  the parts that are labeled in the drawing below     Game Controller       Console       Handgrip Pulse Sensor       Integrated Universal  Dock for iPod    Handlebar          Water Bottle Holder     Power Cord    Wheel     No water bottle is included       ASSEMBLY    Assembly requires two persons  Place all parts of the elliptical exerciser in a cleared area and remove the  packing materials  Do not dispose of the packing mat
12. al score   The display will then show the four highest scores  recorded since the scores were reset  If desired   press and hold down the right button on either  controller to reset the scores     If your score is one of the four highest  the display  will prompt you to enter a name consisting of three  letters or digits  While the line below the first letter  is flashing  press the up and down buttons on  either controller to select the desired letter or digit   Next  press the right button on either controller  and select another letter or digit  Repeat this  process to select a third letter or digit  Then  press  the right button on either controller again  The dis   play will then show the four highest scores record   ed since the scores were reset  Note  You can  also use the increase  decrease  and Enter but   tons on the console to enter a high score name     Follow your progress with the display     While you exercise and play the Calorie Destroyer  game  the upper left corner of the display will show  the elapsed time  In addition  the display will show  the game level that you have reached and your  current score     To pause the game  press the Display Mode but   ton  To resume the game  press the Display Mode  button repeatedly until the word DESTROYER  appears at the top of the display  and then begin  pedaling     When you are finished exercising  the console  will turn off automatically     See step 6 on page 17     HOW TO PLAY THE BLACKJACK GAME    Blackjack i
13. ard  the shipping bracket  Do not discard the two  M10 x 120mm Patch Screws     Orient the Front Stabilizer  49  with the Wheels   8  in the position shown  While a second per   son tips the Frame  1  backward  attach the  Front Stabilizer to the Frame with the two M10 x  120mm Patch Screws  78      Identify the Right Handlebar  36   which is  marked with an    R    sticker  While a second per   son holds the Right Handlebar near the Frame   1   connect the Right Handlebar Wire  88  to  the Right Extension Wire  111   Insert the excess  wire into the Right Handlebar     Attach the Right Handlebar  36  to the Frame  1   with the Upper Body Endcap  34  and three  M6 x 18mm Patch Screws  108      Repeat this step for the other side of the  elliptical exerciser        3     Identify the Upright  3  and orient it as shown   Then  pull the Pulse Wire  64  out of the top of  the Upright     While a second person holds the Upright  3   near the top of the Frame  1   slide the Upright  Cover  6  upward onto the Upright  Have the  second person hold the Upright Cover  around the Upright until step 5     Note  For clarity  the Upright Cover  6  is not  shown in the drawing  Have the second per   son hold the Upright  3  and the Upright Cover  near the top of the Frame  1   Locate the wire  tie  see the inset drawing  in the Upright  Tie the  lower end of the wire tie to the Wire Harness   46  and the Left and Right Extension Wires   110  111   Next  pull the upper end of the wire  tie u
14. decision  Note  In some circum   stances  you can choose to CHECK instead of  CALL     If you decide to RAISE  tap the upward and down   ward arrow boxes to select the desired number of  credits  and then tap the OK box     After you make your betting decision  play will con   tinue with the other players  Continue to make bet   ting decisions throughout the betting rounds and  the deals  When the flop is dealt  three cards will  appear in the upper left area of the display   Additional cards will appear in this area when the  turn and river are dealt  Assess these cards and  make betting decisions as before  During the  game  the other players may fold  bust  or contin   ue to a showdown     The player with the best five card hand in any  combination of hole and community cards will win  the showdown     After the showdown  the word WINS  will appear in  the center of the display  The number of credits  won by each player will be shown along the right  side of the display  To view the cards held by the  other players  tap the number of credits won by  each player     The game will continue in this way until you win all  the other players    credits or until you have no cred   its available to bet  To exit the game at any time   press the Texas Hold   em button     Follow your progress with the display     While you pedal and play the Texas Hold    Em  game  the upper left corner of the display will  show the elapsed time  To view additional exercise  information  press the D
15. e    On     option keeps the backlight on while the console is  on  The    Off    option turns the backlight off  To  select a backlight option  first press and hold down  the Display Mode button for several seconds   Next  press the increase button located next to the  Enter button to select the desired backlight option   Then  press the Display Mode button to save your  selection     5  Measure your heart rate if desired     If there are sheets  of clear plastic on  the metal con   tacts on the hand   grip pulse sensor   remove the plas   tic  To measure  your heart rate   hold the handgrip  pulse sensor with  your palms resting  against the metal  contacts  Avoid moving your hands or gripping  the contacts too tightly     When your pulse is detected  one  two  or three  dashes will appear in the display  and then your  heart rate will appear  For the most accurate heart  rate reading  hold the contacts for at least 15 sec        17    onds  Note  If you continue to hold the handgrip  pulse sensor  the display will show your heart rate  for up to 30 seconds     If the display does not show your heart rate  make  sure that your hands are positioned as described   Be careful not to move your hands excessively or  to squeeze the metal contacts too tightly  For opti   mal performance  clean the metal contacts using a  soft cloth  never use alcohol  abrasives  or  chemicals to clean the contacts     When you are finished exercising  the console  will turn off automatically     I
16. e a  moment for the ramp to reach the selected incline  level     4  Follow your progress with the display     The upper left corner of the display will show  the elapsed time  Note  When a workout is select   ed  the display will show the time remaining in the  workout instead of the elapsed time     16       x       CALORIES          DISTANCE                   The lower left corner of the display will show  the distance  in total revolutions  you have ped   aled     The upper right corner of the display will show  the approximate number of calories you have  burned  The upper right corner of the display will  also show your heart rate when you use the hand   grip pulse sensor  see step 5 on page 17      The lower right corner of the display will show  your pedaling pace in revolutions per minute   rpm      The center of the display will show the resis   tance level of the pedals for a few seconds each  time the resistance level changes  This display will  also show the ramp incline level for a few seconds  each time the ramp incline level changes     You can also view selected information at a larger  size  Press the Display Mode button repeatedly to  view time and distance information  time and calo   rie information  or time and pace information   Press the Display Mode button again to view all  information     To adjust the volume level of the console  press  the increase and decrease buttons located next to  the Enter button     The console has two backlight options  Th
17. erials until assembly is completed           Assembly requires the included hex keys and your own Phillips screwdriver  3   adjustable    wrench     AR    and rubber mallet          As you assemble the elliptical exerciser  use the drawings below to identify small parts  The number in parentheses  below each drawing is the key number of the part  from the PART LIST near the end of this manual  The number  following the parentheses is the quantity needed for assembly  Note  Some small parts may have been pre   assembled  If a part is not in the hardware kit  check to see if it has been preassembled                    TO                                                                                                     8 x  50  M4 x 16mm  8 x 1 75   8 x 2   Screw  92  6 Screw  90  4 Screw  95  1 Screw  74  4    L    i II    M6 x 14mm M6 x 18mm Patch M8 x 19mm Patch M10 x 15mm Patch    sorew  78  Screw  108  6 Screw  85  4 Screw  77  2                                        Q                   M8 Hex Nylon M10 Hex Nylon  M10 x 22mm x Locknut  80  4 Locknut  103  4 Barrel Nut  76    1    A             Ea O II          i             M8 x 55mm Patch Screw  115  4    Li    M10 x 58mm Bolt  84  4             M10 x 120mm Patch Screw  78  2       To make assembly easier  read the  information on page 5 before you begin  assembling the elliptical exerciser     Remove the two M10 x 120mm Patch Screws   78  and the shipping bracket  not shown   attached to the front of the Frame  1   Disc
18. f the pedals do not move for several seconds  a  tone will sound and the console will pause  If the  pedals do not move for several minutes and the  buttons are not pressed  the console will turn off  and the display will be reset     HOW TO USE A WEIGHT LOSS WORKOUT    1     Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Select a weight loss workout     To select one of the  four weight loss  workouts  press the  Weight Loss  Workouts button  repeatedly until the  name of the  desired workout  appears in the display  The workout time and a  profile of the resistance levels for the workout will  also appear in the display        Begin pedaling or press the Start button to  start the workout     Each workout is divided into several one minute  segments  One resistance level and one target  rpm  pace  setting are programmed for each seg   ment  Note  The same resistance and or target rom  setting may be programmed for consecutive seg   ments     The resistance level and the target rpm for the first  segment will appear in the center of the display for  a few seconds  During the workout  the workout  profile will show your progress  see the drawing  above   The flashing segment of the profile repre   sents the current segment of the workout  The  height of the flashing segment indicates the resis   tance level for the current segment  At the end of  each segment of
19. ge 17     When you are finished exercising  the console  will turn off automatically     See step 6 on page 17     HOW TO PLAY THE FAT BLOCKER GAME    The Fat Blocker game requires quick thinking and fast  reflexes  In addition to the console buttons  you will  use the four button game controllers on the handle   bars to play the game  Follow the steps below to play  the Fat Blocker game     1     Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Select the Fat Blocker game    To select the Fat Blocker game  press the Fat  Blockers button  The words FAT BLOCKER will  appear at the top of the display     Pedal to start the game     When you start the Fat Blocker game  a game  arena will appear in the center of the display           TIME CALORIES  SONNO NNO ANNA NONNI ONTANI ARNO NONNO OREO BREN EEA TRE  Nun pun          RPM                   A block composed of four or five black squares will  slowly move downward until it reaches the bottom  of the arena  Another block will then move down   ward  There are blocks of eight different shapes   As each block falls  you can move it to the left or  right using the left and right buttons on the left  controller  In addition  you can rotate the block  counterclockwise or clockwise using the left and  right buttons on the right controller  Once you have  positioned and oriented a block  you can speed its  motion to the bott
20. ghtly on your floor  during use  see HOW TO LEVEL THE ELLIPTICAL  EXERCISER on page 13     EXERCISE GUIDELINES    A WARNING  Betore beginning    this or any exercise program  consult your  physician  This is especially important for  persons over the age of 35 or persons with  pre existing health problems     The pulse sensor is not a medical device   Various factors may affect the accuracy of  heart rate readings  The pulse sensor is  intended only as an exercise aid in determin   ing heart rate trends in general     These guidelines will help you to plan your exercise  program  For detailed exercise information  obtain a  reputable book or consult your physician  Remember   proper nutrition and adequate rest are essential for  successful results     EXERCISE INTENSITY    Whether your goal is to burn fat or to strengthen your  cardiovascular system  exercising at the proper inten   sity is the key to achieving results  You can use your   heart rate as a guide to find the proper intensity level   The chart below shows recommended heart rates for  fat burning and aerobic exercise        To find the proper intensity level  find your age at the  bottom of the chart  ages are rounded off to the near   est ten years   The three numbers listed above your  age define your    training zone     The lowest number is  the heart rate for fat burning  the middle number is the  heart rate for maximum fat burning  and the highest  number is the heart rate for aerobic exercise     26    Burn
21. ing Fat    To burn fat effectively  you must exer   cise at a low intensity level for a sustained period of  time  During the first few minutes of exercise  your  body uses carbohydrate calories for energy  Only after  the first few minutes of exercise does your body begin  to use stored fat calories for energy  If your goal is to  burn fat  adjust the intensity of your exercise until your  heart rate is near the lowest number in your training  zone  For maximum fat burning  exercise with your  heart rate near the middle number in your training  zone     Aerobic Exercise    If your goal is to strengthen your  cardiovascular system  you must perform aerobic  exercise  which is activity that requires large amounts  of oxygen for prolonged periods of time  For aerobic  exercise  adjust the intensity of your exercise until  your heart rate is near the highest number in your  training zone     WORKOUT GUIDELINES    Warming up    Start with 5 to 10 minutes of stretching  and light exercise  A warm up increases your body  temperature  heart rate  and circulation in preparation  for exercise     Training Zone Exercise     Exercise for 20 to 30 min   utes with your heart rate in your training zone   During  the first few weeks of your exercise program  do not  keep your heart rate in your training zone for longer  than 20 minutes   Breathe regularly and deeply as you  exercise   never hold your breath     Cooling down   Finish with 5 to 10 minutes of  stretching  Stretching increases 
22. inning on page 16  To use a weight loss  workout  see page 18  To use a classic workout   see page 19  To play the Fat Blocker game  see  page 20  To play the Calorie Destroyer game  see  page 21  To play the Blackjack game  see page 22   To play the Texas Hold    Em game  see page 23  To  use an iFIT workout  see page 24  To use the stereo  sound system  see page 24     HOW TO USE THE MANUAL MODE    Note  If there is a sheet of clear plastic on the face  of the console  remove the plastic     1     Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Select the manual mode     Each time you turn  on the console  the  manual mode will  be selected  If you  have selected a  workout  reselect  the manual mode  by pressing either of the Workouts buttons repeat   edly until the word MANUAL appears in the lower  left corner of the display           Begin pedaling and change the resistance of  the pedals and the incline of the ramp as  desired     As you pedal   change the resis  a   tance of the ped   als by pressing  the Resistance  increase and  decrease buttons   Note  After you press the buttons  it will take a  moment for the pedals to reach the selected  resistance level        To vary the motion of the pedals  you can change  the incline of the ramp  To change the incline   press the Ramp increase and decrease buttons   Note  After you press the buttons  it will tak
23. is product is equipped with a cord  having an equipment grounding conductor and a  grounding plug  Plug the power cord into an appro   priate outlet that is properly installed and ground   ed in accordance with all local codes and ordi   nances  This product is for use on a nominal 120   volt circuit  IMPORTANT  The elliptical exerciser is  not compatible with GFCl equipped outlets     A DANG ER  Improper connection of    the equipment grounding conductor can  result in an increased risk of electric shock   Check with a qualified electrician or service   man if you are in doubt as to whether the  product is properly grounded  Do not modify  the plug provided with the product    if it will  not fit the outlet  have a proper outlet  installed by a qualified electrician     A temporary adapter may be used to connect the  power cord to a 2 pole receptacle as shown at the  right if a properly grounded outlet is not available  The  temporary adapter should be used only until a proper   ly grounded outlet can be installed by a qualified elec   trician     The green   colored rigid  ear  lug  or  the like  extending  from the  adapter must  be connected  to a perma   nent ground    QI  such as a    properly    grounded outlet box cover  Whenever the adapter is  used  it must be held in place by a metal screw  Some  2 pole receptacle outlet box covers are not  grounded  Contact a qualified electrician to deter   mine if the outlet box cover is grounded before  using an adapter     Gro
24. isplay Mode button repeat   edly     When you are finished exercising  the console  will turn off automatically     See step 6 on page 17     HOW TO USE AN IFIT WORKOUT  1  Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Insert an iFIT card and select a workout     To use an iFIT workout  insert an iFIT card into the  iFIT slot  make sure that the iFIT card is oriented  so the metal contacts are face down and are fac   ing the slot  When the iFIT card is properly insert   ed  the indicator next to the slot will light and  words will appear in the display                  loft V   A     iFIT Slot    Hit       FIT Card    DEMO    www ifit com    Next  select the desired workout on the iFIT card  by pressing the increase and decrease buttons  next to the iFIT slot     A moment after you select a workout  the voice of  a personal trainer will begin guiding you through  your workout  iFIT workouts function in the same  way as classic workouts  To use the workout  see  steps 3 to 6 on page 19     When you are finished exercising  remove the  iFIT card     Remove the iFIT card when you are finished exer   cising  Store the iFIT card in a secure place        24    HOW TO USE THE STEREO SOUND SYSTEM    To play music or audio books through the console   s  stereo sound system while you exercise  you must  connect your iPod    CD player  or personal audio play   er through 
25. ld    Em  consult a card game rule book or  other card game resource     1     Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Select the Texas Hold    Em game     To select the Texas Hold    Em game  press the  Texas Hold   em button  The words TEXAS HOLD     EM will appear at the top of the display     Tap the screen to start the game     As you pedal  tap the screen to begin the Texas  Hold    Em game  After you start the game  a repre   sentation of a game table will appear in the dis   play  Your hole cards will be shown in the lower  left corner of the display  The number of credits in  the pot will be shown in the black box in the center  of the display  The amount bet by each player will  be shown along the right side of the display  A  game option box will be shown below the pot                                During the game  player information will appear  along the right side of the display  Your player  information is located in the lower right corner of  the display  The black X in the display indicates  the location of the dealer button  The black arrow  indicates which player   s turn it is     23    When it is your turn  assess your cards and tap  the C R F game option box to make a betting deci   sion  you can choose to CALL  RAISE  or FOLD   You can also tap the CARDS box to view your  cards and any community cards on the table  before making a 
26. lon Locknut   8 x  313  Screw   M8 Hex Nylon Locknut Cls10 9  M8 x 78mm Patch Screw  Pedal Insert   M6 x 18mm Patch Screw  M6 Nylon Locknut   Left Extension Wire  Right Extension Wire  Ground Wire   Lift Motor Wire   Power Cord   M8 x 55mm Patch Screw  Hex Key   Grease Packet   User   s Manual    Note  Specifications are subject to change without notice  See the back cover of this manual for information about    ordering replacement parts   These parts are not illustrated     29    EXPLODED DRAWING A    Model No  NTEL00907 0 R1007B       30    R1007B    EXPLODED DRAWING B    Model No  NTEL00907 0          31    ORDERING REPLACEMENT PARTS    To order replacement parts  please see the front cover of this manual  To help us assist you  be prepared to  provide the following information when contacting us       the model number and serial number of the product  see the front cover of this manual     the name of the product  see the front cover of this manual       the key number and description of the replacement part s   see the PART LIST and the EXPLODED  DRAWING near the end of this manual        LIMITED WARRANTY          ICON Health  amp  Fitness  Inc   ICON  warrants this product to be free from defects in workmanship and  material  under normal use and service conditions  for a period of one  1  year from the date of purchase   There is a twelve  12  year warranty on the resistance mechanism  There is a lifetime warranty on the  frame  This warranty extends only to the origi
27. nal purchaser  ICON s obligation under this warranty is lim   ited to replacing or repairing  at ICON s option  the product through one of its authorized service centers   All repairs for which warranty claims are made must be pre authorized by ICON  If the product is shipped  to a service center  freight charges to and from the service center will be the customer   s responsibility  For  in home service  the customer will be responsible for a minimal trip charge  This warranty does not extend  to any product or damage to a product caused by or attributable to freight damage  abuse  misuse   improper or abnormal usage or repairs not provided by an ICON authorized service center  products used  for commercial or rental purposes  or products used as store display models  No other warranty beyond  that specifically set forth above is authorized by ICON     ICON is not responsible or liable for indirect  special or consequential damages arising out of or in con   nection with the use or performance of the product or damages with respect to any economic loss  loss  of property  loss of revenues or profits  loss of enjoyment or use  costs of removal or installation or other  consequential damages of whatsoever nature  Some states do not allow the exclusion or limitation of inci   dental or consequential damages  Accordingly  the above limitation may not apply to you     The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  merchan
28. nt of the profile will  begin to flash  If a different resistance level and or  target rpm is programmed for the next segment   the resistance level and or target rpm will flash in  the display for a few seconds to alert you  The  resistance of the pedals will then change        19    6     As you exercise   you will be prompt   ed to keep your  pedaling pace near  the target rpm set   ting for the current  segment  When an  upward pointing arrow appears in the display   increase your pace  When a downward pointing  arrow appears in the display  decrease your pace   When no arrows appear  maintain your current  pace     RPM       IMPORTANT  The target rpm settings are  intended only to provide motivation  Your actu   al pace may be slower than the target rpm set   tings  Make sure to pedal at a pace that is com   fortable for you     If the resistance level for the current segment is  too high or too low  you can manually override the  setting by pressing the Resistance buttons   IMPORTANT  When the current segment of the  workout ends  the pedals will automatically  adjust to the resistance level for the next seg   ment     The workout will continue in this way until the last  segment ends  To stop the workout at any time   stop pedaling  A tone will sound and the time will  begin to flash in the display  To restart the workout   simply resume pedaling    Follow your progress with the display    See step 4 on page 16    Measure your heart rate if desired     See step 5 on pa
29. o cause further stretching of the achilles  tendons  bend your back leg as well  Stretches  Calves  achilles  tendons and ankles     4  Quadriceps Stretch    With one hand against a wall for balance  reach back and grasp  one foot with your other hand  Bring your heel as close to your  buttocks as possible  Hold for 15 counts  then relax  Repeat 3  times for each leg  Stretches  Quadriceps and hip muscles     5  Inner Thigh Stretch    Sit with the soles of your feet together and your knees outward   Pull your feet toward your groin area as far as possible  Hold for  15 counts  then relax  Repeat 3 times  Stretches  Quadriceps and  hip muscles     27       PART LIST     Model No  NTEL00907 0    Key No  Qty     OONDARWNDN      NA OeHHNH AN AH AH AA A HS                    dA S  Ss Ss ss as POSH NDNNNRA DDN    Description Key No  Qty   Frame 43 1  Rear Stabilizer 44 2  Upright 45 2  Console 46 1  Shield Cover 47 1  Upright Cover 48 1  Ramp Cover 49 1  Wheel 50 2  Leveling Foot 51 1  Eddy Mechanism 52 1  Pedal Leg Tube 53 1  Idler 54 1  Pulley 55 1  Crank 56 1  Crank Bearing 57 1  Resistance Motor 58 1  Rear Stabilizer Cover 59 1  Magnet 60 1  Pivot Bushing 61 1  Clamp 62 2  Reed Switch Wire 63 1  Left Handlebar 64 2  Left Upper Body Arm 65 2  Left Pedal Leg 66 1  Link Arm 67 1  Pedal 68 1  Roller 69 5  Weld Spacer 70 4  Roller Axle 71 2  Link Tube 72 2  Crank Arm 73 2  Key 74 4  Left Side Shield 75 2  Upper Body Endcap 76 2  Rear Handle Cover 77 2  Right Handlebar 78 2  Right Up
30. om of the arena  if desired  by  pressing the down button on either controller     20    4     Your goal is to  maneuver the  blocks so that they  form a complete  row of black  squares across the  entire arena  Each  time you complete a row of black squares  the row  will disappear  and all blocks above will move  downward one row     Complete Row       As you play  the blocks will fall faster and faster   however  your pedaling pace will affect the speed  of the blocks   the faster you pedal  the more  slowly the blocks will fall  giving you extra time to  position and orient the blocks  The game will con   tinue until any part of a stacked block reaches the  top of the arena     When the game ends  the display will show your  final score and the level of play that you reached   The display will then show the four highest scores  recorded since the scores were reset  If desired   press and hold down the right button on either  controller to reset the scores     If your score is one of the four highest  the display  will prompt you to enter a name consisting of three  letters or digits  While the line below the first letter  is flashing  press the up and down buttons on  either controller to select the desired letter or digit   Next  press the right button on either controller  and select another letter or digit  Repeat this  process to select a third letter or digit  Then  press  the right button on either controller again  The dis   play will then show the four highest sco
31. per Body Arm 79 1  Right Pedal Leg 80 5  Right Pedal Bracket 81 20  Right Side Shield 82 2  Pivot Axle 83 2  Crank Arm Spacer 84 4    28    R1007B  Description    Belt   Control Grip   Link Arm Endcap   Wire Harness   Power Harness   Left Pedal Bracket   Front Stabilizer   Stabilizer Endcap  Transformer   Control Board   Control Box   Control Box Cover   Ramp   Lift Bracket   Lift Motor   Tube Brace   Lift Axle   Pivot Pin   Hairpin   Roller Spacer   Ramp Axle   Pulse Grip Wire   Cover Plate   Front Ramp Cover   Rear Ramp Cover   Power Receptacle  Custom Clip   Hood Clip   M6 x 9mm Patch Screw  M8 x 50mm Hex Screw  Large Snap Ring    8 x 2  Screw   M6 x 14mm Flat Head Screw  Barrel Nut   M10 x 15mm Patch Screw  M10 x 120mm Patch Screw  M10 x 50mm Button Screw  M8 Hex Nylon Locknut  M6 x 12mm Patch Screw  M8 x 50mm Patch Screw  M8 x 16mm x 2mm Washer  M10 x 58mm Bolt    Key No  Qty          o       OAD  2       _  A    ONIADQUINH TWAWN    Description    M8 x 19mm Patch Screw    8 x  75  Screw   Left Handlebar Wire   Right Handlebar Wire   Game Controller   M4 x 16mm Screw   M4 x 10mm Screw    8 x  50  Screw   Small Snap Ring   M4 x 16mm T Screw    8 x 1 75  Screw   M8 Nylon Locknut    8 x  50  Cupped Screw  M10 x 29mm x 2mm Washer  Pedal Leg Bushing   M10 x 22mm x 1 5mm Washer  M10 x 20mm Patch Screw    Key No  Qty   102 2  103 7  104 2  105 2  106 1  107 2  108 6  109 4  110 1  111 1  112 2  113 1  114 1  115 4                   Description    M10 x 89mm Hex Screw  M10 Hex Ny
32. pward out of the top of the Upright  Then   untie and discard the wire tie  Tip  Do not allow  the ends of the wires to fall into the Upright   Use a piece of tape or an elastic band to  hold the wires in place until step 6     Slide the Upright  3  onto the Frame  1   Attach Avoid pinching  the Upright with four M8 x 19mm Patch Screws the wires during   85   Tip  Avoid pinching the Wire Harness this step   46  and the Extension Wires  110  111  dur   ing this step        5  Slide the Upright Cover  6  downward to the  bottom of the Upright  3   Reattach the Upright  Cover with a  8 x 1 75  Screw  95      6  While a second person holds the Console  4   near the Upright  3   connect the console wire to Avoid pinching the  the Wire Harness  46   Next  connect the con  ff wires during this step  sole pulse wire to the Pulse Wire  64   Then  y  connect the game wire marked with an    R    tag  to the Right Extension Wire  111   which is also  marked with an    R    tag  Connect the other game  wire to the Left Extension Wire  110   Insert the  excess wire downward into the Upright     Tip  Avoid pinching the wires during this  step  Attach the Console  4  to the Upright  3   with four M4 x 16mm Screws  90         7     Identify and orient the Rear Stabilizer  2  as  shown  Tip  Remove the Ramp Cover  not  shown  and set it aside until step 11     Lift the Ramp  55  and slide the Rear Stabilizer   2  onto the Frame  1   Make sure to place the  Ramp on the indicated Rollers  27    
33. res record   ed since the scores were reset  Note  You can  also use the increase  decrease  and Enter but   tons on the console to enter a high score name     Follow your progress with the display     While you exercise and play the Fat Blocker game   the corners of the display will show the elapsed  time  the approximate number of calories you have  burned  and your pedaling pace  In addition  the  display will show your current score and the game  level that you have reached     To pause the game  press the Display Mode but   ton  To resume the game  press the Display Mode  button repeatedly until the words FAT BLOCKER  appear at the top of the display  and then begin  pedaling     When you are finished exercising  the console  will turn off automatically     See step 6 on page 17     HOW TO PLAY THE CALORIE DESTROYER GAME    The Calorie Destroyer game is a fast paced game that  pits you against a squadron of laser firing drones  In  addition to the console buttons  you will use the four   button game controllers on the handlebars to play the  game  Follow the steps below to play the Calorie  Destroyer game     1     Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Select the Calorie Destroyer game    To select the Calorie Destroyer game  press the  Cal Destroyers button  The word DESTROYER  will appear at the top of the display     Pedal to start the game     
34. s a casino style card game in which you  compete against the dealer to win credits  Your goal  during each hand of the game is to have the highest  point total that does not exceed 21 points  You will use  the interactive touch screen on the display to play the  game  Follow the steps below to play Blackjack    Note  For detailed instructions on how to play  Blackjack  consult a card game rule book or other  card game resource     1     Begin pedaling or press any button on the con   sole to turn on the console     A moment after you begin pedaling or press a but   ton  the display will light     Select the Blackjack game     To select the Blackjack game  press the Black  Jack button  The word BLACKJACK will appear at  the top of the display     Tap the screen to start the game     As you pedal  tap the screen to begin the  Blackjack game  After a moment  the words  PLACE YOUR BET will appear in the display  Tap  the screen to select the amount you want to bet on  this hand  Note  You begin each game with 500  credits  As you win or lose credits during the  game  your current total will be shown in the upper  right corner of the display     After you place a bet  a representation of a game  table will appear in the display  The dealer   s cards  will appear in the upper left corner of the display   Your cards will appear in the lower left corner of  the display  The game options will appear in three  boxes on the right side of the display     22                               
35. t until the ped   als come to a complete stop  Note  The elliptical  exerciser does not have a free wheel  the pedals  will continue to move until the flywheel stops   When the pedals are stationary  step off the higher  pedal first  Then  step off the lower pedal     14    Crank Arm       o  98989898989899989898    99  269506960 o 96 969 S  00000009000 8 09050905     9           CONSOLE DIAGRAM          ze    TOUCH SCREEN  Game STr aim  FITNESS GAMES             BLACK JACK       W yh y y  mpm ipy py  dh  CAL DESTROYERS                                  NV VOLUME  N  gii Vv    gt     DISPLAY MODE       WEIGHT LOSS  WORKOUTS    Di    N       ENTER    CLASSIC  WORKOUTS    Oi                         SN    RESISTANCE    WY                   A       FEATURES OF THE CONSOLE    The revolutionary console offers an array of features  designed to make your workouts more effective and  enjoyable  When you use the manual mode of the  console  you can change the resistance of the pedals  and the incline of the ramp with the touch of a button   While you exercise  the console will display continu   ous exercise feedback  You can also measure your  heart rate using the handgrip pulse sensor     The console offers four weight loss workouts designed  to help you lose unwanted pounds  The weight loss  workouts automatically control the resistance of the  pedals and prompt you to vary your pace while count   ing the calories you burn     In addition  the console offers twenty classic workouts   
36. tability or fitness for a particular purpose is limited in its scope and duration to the terms set forth  herein  Some states do not allow limitations on how long an implied warranty lasts  Accordingly  the above  limitation may not apply to you     This warranty gives you specific legal rights  You may also have other rights which vary from state to state     ICON HEALTH  amp  FITNESS  INC   1500 S  1000 W   LOGAN  UT 84321 9813                Part No  258568 R1007B Printed in China    2007 ICON IP  Inc     
37. the audio jack or through the Integrated  Universal Dock for iPod       To use the audio jack  plug an audio cable  not includ   ed  into the jack on the console and into a jack on  your iPod  MP3 player  or CD player  Make sure that  the audio cable is fully plugged in     This product has been designed specifically to work  with iPod and has been certified by the developer to  meet Apple performance standards  To use the iFit    Universal iPod   Connector  plug one end into the  Integrated Universal Dock for iPod and plug the other  end into your iPod  Make sure that the iFit Universal  iPod Connector is fully plugged in     Next  press the play button on your iPod  MP3 player   or CD player  Adjust the volume on your iPod  MP3  player  or CD player or press the Volume increase and  decrease buttons on the console     MAINTENANCE AND TROUBLESHOOTING    Inspect and tighten all parts of the elliptical exerciser  regularly  Replace any worn parts immediately     To clean the elliptical exerciser  use a damp cloth and  a small amount of mild soap  IMPORTANT  To avoid  damage to the console  keep liquids away from  the console and keep the console out of direct  sunlight     HANDGRIP PULSE SENSOR TROUBLESHOOTING    If the console does not display your heart rate when  you hold the handgrip pulse sensor  or if the displayed  heart rate appears to be too high or too low  see step  5 on page 17     25    HOW TO LEVEL THE ELLIPTICAL EXERCISER    If the elliptical exerciser rocks sli
38. the flexibility of your  muscles and helps to prevent post exercise problems     EXERCISE FREQUENCY    To maintain or improve your condition  complete three  workouts each week  with at least one day of rest  between workouts  After a few months of regular exer   cise  you may complete up to five workouts each  week  if desired  Remember  the key to success is to  make exercise a regular and enjoyable part of your  everyday life     SUGGESTED STRETCHES    The correct form for several basic stretches is shown at the right   Move slowly as you stretch   never bounce     1  Toe Touch Stretch    Stand with your knees bent slightly and slowly bend forward from  your hips  Allow your back and shoulders to relax as you reach  down toward your toes as far as possible  Hold for 15 counts   then relax  Repeat 3 times  Stretches  Hamstrings  back of knees  and back     2  Hamstring Stretch    Sit with one leg extended  Bring the sole of the opposite foot  toward you and rest it against the inner thigh of your extended  leg  Reach toward your toes as far as possible  Hold for 15  counts  then relax  Repeat 3 times for each leg  Stretches   Hamstrings  lower back and groin     3  Calf Achilles Stretch    With one leg in front of the other  reach forward and place your  hands against a wall  Keep your back leg straight and your back  foot flat on the floor  Bend your front leg  lean forward and move  your hips toward the wall  Hold for 15 counts  then relax  Repeat  3 times for each leg  T
39. unded Outlet Box  Adapter     gt   ES  o  N     My    Lug        Metal Screw       13    HOW TO MOVE THE ELLIPTICAL EXERCISER    Due to the size and weight of the elliptical exercis   er  moving it requires two persons  Stand in front of  the elliptical exerciser  hold the upright  and place one  foot against one of the front wheels  Pull on the  upright and have a second person lift the rear of the  track until the elliptical exerciser will roll on the front  wheels  Carefully move the elliptical exerciser to the  desired location  and then lower it to the floor     your foot  here    lina           HOW TO LEVEL THE ELLIPTICAL EXERCISER    If the elliptical  exerciser rocks  slightly on your  floor during  use  turn one or  both of the lev   eling feet  beneath the  base or  beneath the  front stabilizer until the rocking motion is eliminated  If  the elliptical exerciser flexes during use  turn the level   ing foot beneath the center of the frame        HOW TO EXERCISE ON THE ELLIPTICAL  EXERCISER    To mount the elliptical exerciser  hold the handlebars  and step onto the pedal that is in the lower position   Then  step onto the other pedal  Push the pedals until  they begin to move with a continuous motion  Note   The crank arms can turn in either direction  It is  recommended that you turn the crank arms in the  direction shown by the arrow below  however  for  variety  you can turn the crank arms in the oppo   site direction     To dismount the elliptical exerciser  wai
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
  TC-P55VT30B TC-P65VT30B Manual de Instruções  Technical Manual and Replacement Parts List    Copyright © All rights reserved. 
   Failed to retrieve file