Abridged user`s manual (Canada version)
Contents
1. Microphone 9 14 e Press to make or answer a call e During a call press to switch between the handset speakerphone and the handset earpiece 10 Tone e Press to switch to tone dialing during a call if you have pulse service 1 21 e While reviewing a caller ID log entry press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory e Press and hold to set or dial your voicemail number 12 e Press to make or answer a call e During a call press to answer an incoming call when you receive a call waiting alert 13 REDIAL PAUSE e Review the redial list e Press and hold to insert a dialing pause while dialing or entering numbers 14 CHARGE light e On when the handset is charging in the handset charger Charger overview 1 Charging pole Display icons overview Handset display icons The battery icon flashes when the battery is low and needs charging The battery icon animates when the battery is charging The battery icon becomes solid when the battery is fully charged The handset ringer is off There are new voicemail received from your telephone service provider The answering system is turned on The ECO mode activates automatically to reduce power consumption when the handset is within range from the telephone base The entry you are reviewing is new in the caller ID log The number of current playing message2. identifier must be provided to your telephone service provider upon request The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA Acompliant telephone cord and modular plug is provided with this product It is designed to be connected to a compatible modular jack that is also compliant An RJ11 jack should normally be used for connecting to a single line and an Deda ds for two lines See the installation instructions in he user s manual The Ringer Equivalence Number REN is used to determine how many devices you may connect to your telephone line and still have them ring when you are called The REN for this product is encoded as the 6th and 7th characters following the US in the product identifier e g if is 03 the REN is 0 3 In most but not all areas the sum of all RENs should be five 5 0 or less For more information please contact your telephone service provider This equipment may not be used with Party Lines If you have specially wired alarm dialing equipment connected to your telephone line ensure the connection of this equipment does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone service provider or a qualified installer If this equipment is malfunctioning it must be unplugged from the modular jack u
3. Method to retrieve When you received new messages the handset and the telephone base both display XX new messages and the gt E PLAY STOP light on the telephone base flashes When you receive new messages the handset and the telephone base display taf and New voicemail messages To retrieve messages you need an access number and or a password provided by your telephone service provider To retrieve messages usually there are two ways e Press gt MV PLAY STOP on the telephone base or Access remotely with an access code Set your built in answering system The answering system can record and store up to 99 messages Each message can be up to three minutes in length The total storage capacity for the announcement messages and memos is approximately 11 minutes The actual recording time depends on individual message characteristics Your answering system allows you to set your announcement to save and delete messages activate call screening to set number of rings before pick up to access remotely and to control the recording time Turn the answering system on or off The answering system must be turned on to answer and record messages e Press O ANS ON OFF to turn the built in answering system on or off OR 1 Press MENU when the handset telephone base is not in use 2 Press V or Ato scroll to Answering sys then press SELECT 3 Press V or Ato scroll to Answer on o
4. other electrical devices Protect your phone from moisture dust corrosive liquids and fumes 7 Slots and openings in the back or bottom of the telepnone base and handset are provided for ventilation To protect them from overheating these openings must not be blocked by placing the product on a Soft surface such as a bed sofa or rug This product should never be placed near or over a radiator or heat register This product should not be placed in any area where proper ventilation is not provided 8 This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply in your home or office consult your dealer or local power company 9 Do not allow anything to rest on the power cord Do not install this product where the cord may be walked on 10 Never pe objects of any kind into this product through the slots in the telephone base or handset because mey may touch dangerous voltage points or create a short circuit Never spill liquid of any kind on the product 11 To reduce the risk of electric shock do not disassemble this product but take ittoan authorized service facility Opening or removing pals of the telephone base or handset other han specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the product is subsequently used 12 Do not overload wall outlets and e
5. you can switch from pulse to touch tone dialing temporarily during a call 1 During a call press TONE 2 Use the dialing keys to enter the number you wish to dial The telephone sends touch tone signals It automatically returns to pulse dialing mode after you end the call Telephone operations Make a call Press x or on the handset and then dial the number OR e Lift the corded handset or press SPEAKER on the telehpone base then dial the number Answer a Call Press Ss or any of the dialing keys on the handset OR Lift the corded handset or press SPEAKER or any of the dialing keys on the telephone base End a call e Press OFF on the handset or place the handset in the handset charger OR 1 When you are using the corded handset place it on the telephone base 2 When you are using the base speakerphone press SPEAKER Speakerphone e When the cordless handset is on a call press to switch between the handset speakerphone and the handset earpiece OR e When the corded handset is on a call press 1 SPEAKER on the telephone base to switch between the telephone base speakerphone and the corded handset Volume e During a call press A VOLUME or V VOLUME on the handset or press Y VOL or VOL A on the telephone base to adjust the listening volume Mute The mute function allows you to hear the other party but the other party cannot hear you 1 Du
6. dialing pause for entering numbers only e Press 0 to add a space for entering names only Review a directory entry Entries are sorted alphabetically 1 Press MA on the cordless handset when the phone is not in use or AM on the telephone base when the telephone base is not in use 2 Press V or A to browse through the directory or use the dialing keys to start a name search Dial a directory entry e When the desired entry appears Press Xx or 14 on the handset OR Lift the corded handset or press SPEAKER on the telephone base Edit a directory entry 1 When the desired entry displays press SELECT 2 Use the dialing keys to edit the number then press SELECT 3 Use the dialing keys to edit the name then press SELECT Delete a directory entry 1 When the desired entry appears press DELETE When the screen displays Delete contact press SELECT Speed dial You can copy up to nine directory entries into the speed dial locations 0 and 2 9 so that you can dial these numbers more quickly Assign a speed dial number 1 Press MENU when the phone is not in use 2 Press V or Ato scroll to Directory then press SELECT 3 Press V or A to scroll to Speed dial then press SELECT 4 Press V Aor a dialing key 0 or 2 9 to choose the desired speed dial location 5 Press SELECT The screen displays Copy from DIR 6 Press or Ato scroll to desired entry then press SELECT Dial a speed
7. up the corded handset to answer the call e To end the intercom call without answering or canceling the incoming call press SPEAKER or place the corded handset back to the base The telephone continues to ring Call transfer using intercom Use the intercom feature to transfer an outside call to another cordless handset or the telephone base To transfer a call with a cordless handset 1 During a call press INT 2 To answer the call on the destination handset press INT or any dialing key The outside call is still on hold You can now have a private intercom conversation OR To answer the call at the telephone base press INT SPEAKER any dialing key or lift the corded handset The outside call is still on hold You can now have a private intercom conversation To transfer a call at the telephone base 1 During a call press INT 2 To answer the call on the destination handset press t INT or any dialing key The outside call is still on hold You can now have a private intercom conversation Redial list Each handset and the telephone base store the last 10 telephone numbers dialed When there are already 10 entries the oldest entry is deleted to make room for the new entry Review and dial a redial list entry 1 Press REDIAL on the handset or the telephone base when the phone is not in use 2 Press V A or REDIAL repeatedly until the desired entry displays 3 When the
8. 1 Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty and 2 Include a valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other limitations This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this Product The warranty exclusively describes all of VTech s responsibilities regarding the Product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification State Provincial Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the Product is fit for ordinary use are limited to one year from the date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall VTech be liable for any indirect specia
9. 2 Scroll to Settings and then press SELECT 3 Scroll to choose Key tone then press SELECT 4 Press V or A to choose Key tone On or Key tone Off then press SELECT to save Ringer tone You can choose from different ringer tones for each handset and the telephone base 1 Press MENU when the handset telephone base is not in use 2 Scroll to Ringers and then press SELECT 3 Scroll to choose Ringer tone then press SELECT 4 Press V or A to sample each ringer tone then press SELECT to save Q NOTE If you turn off the ringer volume on a cordless handset you will not hear ringer tone samples Telephone base ringer volume Press V VOL or A VOL on the telephone base to adjust the ringer volume when the telephone base is not in use When you set the ringer volume to zero the base ringer is off The telephone base announces Base ringer is off and displays Ringer off and Handset ringer volume You can adjust the handset ringer volume level or turn the ringer off 1 Press MENU when the handset telephone base is not in use 2 Scroll to Ringers and then press SELECT twice 3 Press V or A to sample each volume level then press SELECT to save S9 NOTE When the ringer volume is set to off the handset still rings when you press FIND HANDSET at the telephone base Temporary ringer silencing When the telephone is ringing you can temporarily silence the ringer without disconnecting the call T
10. D HANDSET e Press to page all handsets when the phone is not in use 4 gt m PLAY STOP e Press to start or stop message playback e Flashes when there are new messages or memos in the answering system X DELETE e Press to delete the playing message or playing announcement e While reviewing the redial list directory or caller ID log press to delete an individual entry e While entering names or numbers press to delete a character or digit REPEAT e Press once to repeat the playing message e Press twice to play the previous message gt SKIP e Press to skip to the next message 5 MUTE e Mute the microphone during a call e Silence the base ringer temporarily while the phone is ringing VVOLA e Adjust the listening volume e Adjust the telephone base ringer volume ANS ON OFF e Press to turn the built in answering system on or off REDIAL PAUSE e Review the redial list e Press repeatedly to view the last 10 numbers dialed e Press and hold to insert a dialing pause while dialing or entering numbers SPEAKER e Press to make answer or end a call e During a call press to switch between the corded handset and the base speakerphone 6 erf e Press and hold to set and turn on the quiet mode or turn it off e Press repeatedly to display other dialing options when reviewing a caller ID log entry T oren e Press to enter space during text editing 8 Toney e Switch to tone dialing t
11. Go to www vtechcanada com for Support and the latest VTech product news 595 95 1 FLASH CANCEL Yc AQI MENU SELECT INT CS6648 2 CS6648 3 CS6649 CS6649 2 CS6649 3 DECT 6 0 cordless telephone IN USE FIND HANDSET Iie Abridged user s manual Canada version Congratulations on purchasing your new VTech product Before using this telephone please read Important safety instructions This abridged user s manual provides you with basic installation and use instructions A limited set of features are described in abbreviated form Please refer to the online User s manual for a full set of installation and operation instructions at www vtechcanada com Telephones identified with this logo have reduced noise and interference when used with most T coil equipped hearing aids and cochlear implants The TIA 1083 Compliant Logo is a trademark of the Telecommunications Industry Association Used under license Compatible with Hearing Aid T Coil TIA 1083 What s in the box Your telephone package contains the following items Save your sales receipt and original packaging in the event warranty service is necessary Cars one vo a fese r D e w0 om SEER ANS ON OFF PAUSE 1 set for CS6649 2 sets for CS6648 2 CS6649 2 3 sets for CS6648 3 CS6649 3 1 set for CS6648 2 CS6649 2 2 sets f
12. V interference Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs To minimize or prevent such interference do not place the telephone base of the cordless telephone near or on top of a TV or VCR If interference is experienced moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference e Rechargeable batteries Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings bracelets and keys The battery or conductor ma overheat and cause harm Observe proper polarity between the battery and the battery charger e Nickel metal hydride rechargeable batteries Dispose of these batteries in a safe manner Do not burn or puncture the battery Like other batteries of this type if burned or punctured they could release caustic material which could cause injury The RBRC seal The RBRC seal on the nickel metal hydride battery indicates that VTech Communications Inc is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives when taken out of service within the United States and Canada The RBRC program provides a convenient alternative to placing used nickel metal hydride batteries into the trash or municipal waste which may be illegal in your area VTech s participation in RBRC makes it easy for you to drop
13. and the total number of messages recorded The total number of messages recorded when the telephone base is not in use The number of the playing message You can choose to connect the telephone base for desktop usage or wall mounting f9 NOTES Use only the adapters provided e Make sure the electrical outlets are not controlled by wall switches e The adapters are intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling under the table or cabinet outlet Qr e f you subscribe to digital subscriber line DSL high speed Internet service through your telephone line make sure you install a DSL filter not included between the telephone line cord and telephone wall jack Contact your DSL service provider for more information Before use After you install your telephone or power returns following a power outage the handset will prompt you to set the date and time Set date and time Install and charge the battery Install the battery Install the battery as shown below f9 NOTES Use only supplied battery e Charge the battery provided with this product only in accordance with the instructions and limitations specified in this manual e If the handset wi
14. code Contact your telephone service provider for instructions on how to configure the voicemail settings and listen to messages 9 NOTE After you have listened to all new voicemail messages the indicators on the handset and the telephone base turn off automatically Turn off the new voicemail indicator If you have retrieved your voicemail while away from home and the telephone still displays the new voicemail indicators use this feature to turn off the indicators f9 NOTE This feature turns off the indicators only it does not delete your voicemail messages 1 Press MENU when the handset telephone base is not in use 2 Scroll to Settings then press SELECT 3 Scroll to Cir voicemail then press SELECT 4 Press SELECT again to confirm Expand your telephone system You can add new handsets CS6609 purchased separately to your telephone system Your telephone base supports a maximum of five handsets For more details refer to the user s manual that comes with your CS6609 new handset General product care Taking care of your telephone Your cordless telephone contains sophisticated electronic parts so it must be treated with care Avoid rough treatment Place the handset down gently Save the original packing materials to protect your telephone if you ever need to ship it Avoid water Your telephone can be damaged if it gets wet Do not use the handset outdoors in the rain or handle it w
15. desired entry displays press x or t on the handset to dial OR Lift the corded handset or press SPEAKER on the telephone base to dial Delete a redial list entry e While the screen displays the desired number press DELETE on the handset or press X DELETE on the telephone base The directory can store up to 50 entries which are shared by all handsets and the telephone base Each entry may consist of a telephone number with up to 30 digits and a name with up to 15 characters Add a directory entry 1 Enter the number when the phone is not in use Press MENU then go to Step 3 OR e Press MENU on the handset or on the telephone base when the phone is not in use then press Y or A to scroll to Directory then press SELECT e Press or Ato scroll to Add contact then press SELECT 2 Use the dialing keys to enter the number OR Copy a number from the redial list by pressing REDIAL and then press V A or REDIAL repeatedly to find the desired number Press SELECT to copy the number Press SELECT to move on to enter the name Use the dialing keys to enter the name Additional key presses show other characters of that particular key 5 Press SELECT to save While entering names and numbers you can e Press DELETE to backspace and erase a digit or character e Press and hold DELETE to erase the entire entry A O e Press V or Ato move the cursor to the left or right e Press and hold PAUSE to insert a
16. dial number e When the phone is not in use press and hold a dialing key 0 or 2 9 to dial the number stored in the corresponding speed dial location Delete a speed dial number 1 Press MENU when the phone is not in use 2 Press V or Ato scroll to Directory then press SELECT 3 Press V or Ato scroll to Speed dial then press SELECT 4 Press V Aor a dialing key 0 or 2 9 to choose the desired speed dial location then press SELECT to show the speed dial entry 5 Press SELECT again Then press V or Ato scroll to Clear SD and then press SELECT The screen shows Clear SD X OR Press DELETE The screen shows Clear SD X 6 Press SELECT to confirm Caller ID If you subscribe to caller ID service information about each caller will appear after the first or second ring If you answer a call before the callers information appear on the screen it will not be saved in the caller ID log The caller ID log stores up to 50 entries Each entry has up to 24 digits for the phone number and 15 characters for the name If the phone number has more than 15 digits only the last 15 digits appear If the name has more than 15 characters only the first 15 characters are shown and saved in the caller ID log Review a caller ID log entry 1 Press CID on the cordless handset or the telephone base when the phone is not in use 2 Press V or A to browse through the caller ID log Missed call indicator When there are calls t
17. e limited warranty period The limited warranty period for the Product extends for ONE 1 YEAR from the date of purchase If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty this limited warranty also applies to the repaired or replacement Product for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer What is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or 2 Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of VTech 3 Product to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems 4 Product to the extent that the problem is caused by use with non VTech accessories 5 Product whose warranty quality stickers product serial number plates or electronic serial numbers have been removed altered or rendered illegible 6 Product purchased used serviced or shipped for repair from outside the United States of America or Canada or used for commercial or institutional pu
18. e next message during playback 8 Endthe cal a o0 Turn the answering system on or off 4 Hang up or press 8 to end the call Using the built in answering system and voicemail service You can use your answering system and voicemail service together by setting your answering system to answer before voicemail service answers as described below To learn how to program your voicemail settings contact your telephone service provider If you are on a call or if the answering system is busy recording a message and you receive another call the second caller can leave a voicemail message Set your answering system to answer calls at least two rings earlier than your voicemail is set to answer For example if your voicemail answers after six rings set your answering system to answer after four rings Some voicemail providers may program the delay before answering calls in seconds instead of rings In this case allow six seconds per ring when determining the appropriate setting Retrieve voicemail from telephone service Voicemail is a feature available from most telephone service providers It may be included with your telephone service or may be optional Fees may apply Retrieve voicemail When you received a voicemail the handset and the telephone base display 84 and New voicemail To retrieve you typically dial an access number provided by your telephone service provider and then enter a security
19. e of Humans to RF Fields Limited warranty What does this limited warranty cover The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase Consumer or you that the Product and all accessories provided in the sales package Product are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the Product operating instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period Materially Defective Product During the limited warranty period VTech s authorized service representative will repair or replace at VTech s option without charge a Materially Defective Product If we repair the Product we may use new or refurbished replacement parts If we choose to replace the Product we may replace it with a new or refurbished Product of the same or similar design We will retain defective parts modules or equipment Repair or replacement of the Product at VTech s option is your exclusive remedy VTech will return the repaired or replacement Products to you in working condition You should expect the repair or replacement to take approximately 30 days How long is th
20. emporarily during a call 9 MIC e Microphone 10 1 e While reviewing a caller ID log entry press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory e Press and hold to set or dial your voicemail number 11 Speakerphone 12 Corded handset Handset overview vtech fl i j Nie 8 A ELECT VOLUME eA 2 F LAS Q 1 Handset earpiece 2 LCD display 3 MENU SELECT e Show the menu e While in a menu press to select an item or save an entry or setting 4 OFF CANCEL e Hang up a call e Return to the previous menu or idle mode without making changes e Delete digits while predialing e Silence the handset ringer temporarily while the phone is ringing e Press and hold to erase the missed call indicator when the phone is not in use 5 quer tf e Press and hold to set and turn on the quiet mode or turn it off e Press repeatedly to display other dialing options when reviewing a caller ID log entry 6 INT e Press to initiate or answer an intercom call or to transfer a call 7 MUTE DELETE e Mute the microphone during a call e Silence the handset ringer temporarily while the phone is ringing e Delete the displayed entry while reviewing the directory caller ID log or redial list e Delete digits or characters when entering numbers or names e Delete the playing message or playing announcement 8
21. ff then press SELECT 4 Press V or Ato scroll to Answer On or Answer Off then press SELECT Voice language You can select a language English or French to be used for the voice prompts in the answering system 1 Press MENU when the handset telephone base is not in use 2 Press V or Ato scroll to Answering sys then press SELECT 3 Press V or Ato scroll to Ans sys setup then press SELECT 4 Scroll to Voice language then press SELECT 5 Press V or A to select English or Fran ais then press SELECT e The screen displays Set English when you choose English e The screen displays Set Francais when you choose Frangais 6 Press SELECT to save Default announcement The telephone is preset with a greeting that answers Calls with Hello Please leave a message after the tone You can use this preset announcement or replace it with your own Record your own announcement The announcement can be up to 90 seconds in length 1 2 3 4 9 Press MENU when the phone is not in use Press or Ato scroll to Answering sys then press SELECT twice The system announces To play press 2 To record press 7 Press 7 to record The system announces Record after the tone Press 5 when you are done After the tone speak towards the microphone Press 5 when done Play your announcement Ne 2 3 Press MENU when the phone is not in use Press or Ato scroll to Answering sys
22. hat have not been reviewed in the caller ID log the screens display XX missed calls Each time you review a caller ID log entry marked NEW on the handset or MAM on the telephone base the number of missed calls decreases by one When you have reviewed all the missed calls the missed call indicator no longer displays If you do not want to review the missed calls one by one press and hold CANCEL when not in use to clear the missed call indicator All the entries are then considered old Dial a caller ID log entry When the desired entry displays press s or 4 on the handset to dial OR When the desired entry displays press 1 SPEAKER or lift the corded handset to dial Save a caller ID log entry to the directory 1 When the desired caller ID log entry displays press SELECT 2 Use the dialing keys to modify the number if necessary Then press SELECT 3 Use the dialing keys to modify the name if necessary Then press SELECT Delete caller ID log entries e When the desired caller ID log entry displays press DELETE To delete all caller ID log entries 1 Press MENU on the handset or on the telephone base when the phone is not in use 2 Scroll to Caller ID log and then press SELECT 3 Scroll to Del all calls then press SELECT twice Sound settings Key tone You can turn the key tone on or off for each handset and the telephone base 1 Press MENU when the handset telephone base is not in use
23. he next call rings normally at the preset volume To silence the handset ringer e Press MUTE or CANCEL on the handset and it displays Ringer muted and Ak To silence the telephone base ringer e Press MUTE or CANCEL on the telephone base and it displays Quiet mode You can turn on quiet mode for a period of time 1 12 hours During this period all tones except paging tone and call screening are muted To set and turn the quiet mode on 1 Press and hold QUIET when the handset telephone base is not in use 2 Use the dialing keys to enter the desired duration 1 12 then press SELECT To turn the quiet mode off e While the quiet mode is on press and hold QUIETH About the built in answering system and voicemail service For message recording your telephone has a built in answering system and it also supports voicemail service offered by your telephone service provider subscription is required and fee may apply The main differences between them are Built in answering system Voicemail from Category telephone service Storage Messages are stored in the telephone base Messages are stored in a server or system provided by your telephone service provider You messages will not be deleted automatically You have to delete your message manually Your messages may be automatically deleted after a period of time Contact your telephone service provider for more details
24. hone base e Place the corded handset back to the telephone base or press SPEAKER on the telephone base to exit the call The call continues until both devices hang up Call waiting If you subscribe to call waiting service from your telephone service provider you hear an alert tone when there is an incoming call while you are already on a call e Press FLASH to put your current call on hold and take the new call e Press FLASH to switch back and forth between Calls Find handset Use this feature helps you find misplaced handsets To start paging e Press FIND HANDSET on the telephone base and its screen displays Paging All idle handsets ring and display Paging To stop paging Press Sx OFF or any of the dialing keys on the cordless handset OR e Place the cordless handset to the handset charger OR e Press FIND HANDSET on the telephone base 9 NOTE Do not press and hold FIND HANDSET for more than four seconds It may lead to handset deregistration Use the intercom feature for conversations between the telephone base and a cordless handset or two cordless handsets e Press 7 for the telephone base or 1 5 for HANDSET 1 to HANDSET 5 To initiate an intercom call with a cordless handset 1 Press INT on the cordless handset when the phone is not in use 2 To answer the intercom call on the destination handset press Xx INT or any dialing key OR To answer
25. ion spark in such an environment could create a fire or explosion Such environments might include medical use of oxygen without adequate ventilation industrial gases cleaning solvents gasoline vapors etc a leak of natural gas etc 16 Only put the handset of your telephone next to your ear when it is in normal talk mode 17 The power adapter is intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place If itis puggen into a ceiling under the table or cabinet outlet SAVE THESE INSTRUCTIONS Battery e Use only the battery provided or equivalent To order a replacement visit our website at www vtechcanada com or call 1 800 267 7377 e Do not dispose of the battery in a fire Check with local waste management codes for special disposal instructions e Do not open or mutilate the battery Released electrolyte is corrosive and may cause burns or injury to the eyes or skin The electrolyte may be toxic if swallowed e Exercise care in handling batteries in order not to create a short circuit with conductive materials e Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual Precautions for users of implanted cardiac pacemakers Cardiac pacemakers applies only to digital cordless telephones Wireless Technology Research LLC WTR an independe
26. ith wet hands Do not install the telephone base near a sink bathtub or shower Electrical storms Electrical storms can sometimes cause power surges harmful to electronic equipment For your own safety take caution when using electrical appliances during storms Cleaning your telephone Your telephone has a durable plastic casing that should retain its luster for many years Clean it only with a dry non abrasive cloth Do not use dampened cloth or cleaning solvents of any kind Frequently asked questions Below are the questions most frequently asked about the cordless telephone If you cannot find the answer to your question visit our website at www vtechcanada com or call 1 800 267 7377 for customer service My telephone does not work at all Make sure the telephone base is installed properly and battery is installed and charged correctly For optimum daily performance return the handset to the telephone base after use The display shows No line cannot hear the dial tone Disconnect the telephone line cord from your telephone and connect it to another telephone If there is no dial tone on that other telephone either then the telephone line cord may be defective Try installing a new telephone line cord If changing the telephone line cord does not help the wall jack or the wiring to this wall jack may be defective Contact your telephone service provider You may be using a new cable o
27. l incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the Product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this Product Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Please retain your original sales receipt as proof of purchase Technical specifications Frequency Crystal controlled PLL synthesizer control Transmit Handset frequency 1921 536 1928 448 MHz Telephone base 1921 536 1928 448 MHz Channels 5 Nominal Maximum power allowed by FCC and effective IC Actual operating range may vary range according to environmental conditions at the time of use Power Handset requirement 2 4V Ni MH battery Telephone base 6V DC 400mA Charger 6V AC 300mA Memory Directory 50 memory locations up to 30 digits and 15 characters Caller ID log 50 memory locations up to 24 digits and 15 characters Specifications are subject to change without notice 2014 for VTech Technologies Canada Ltd All rights reserved 12 14 CS6649 X_CA_ACIB_V4 0 Document order number 91 006908 050 100
28. ll not be used for a long time disconnect and remove the battery to prevent possible leakage Connect the charger and charge the battery Place the handset in the telephone base or handset charger to charge a a Once you have installed the battery the handset LCD display indicates the battery status see the table on next page f9 NOTES e For best performance keep the handset in the telephone base or charger when not in use e The battery is fully charged after 11 hours of continuous charging e Ifyou place the handset in the telephone base or the charger without plugging in the battery the screen displays NO BATTERY Battery Paade Battery status The screen is blank or displays Put in charger and flashes The battery has no or very little charge The handset cannot be used Charge without interruption about 30 minutes The screen The battery has enough charge to be used for a short time Charge without interruption about 30 minutes displays Low battery and f flashes The screen displays HANDSET X The battery is charged To keep the battery charged place it in the handset charger when not in use S9 NOTE Make sure you set the date and time including the year correctly otherwise the answering system does not announce the correct day of the week for your recorded messages time stamp 1 Use the dialing keys 0 9 to ente
29. me You can set the recording time allowed for each incoming message 1 Press MENU when the phone is not in use 2 Press V or Ato scroll to Answering sys then press SELECT 3 Press F or Ato scroll to Ans sys setup then press SELECT 4 Scroll to Recording time then press SELECT 5 Press V or A to select 3 minutes 42 minutes or 1 minute and then press SELECT Using your built in answering system New message indication When there are new answering system messages the handset and the telephone base display XX new messages and the gt m PLAY STOP light on the telephone base flashes If the message alert tone is turned on the telephone base beeps every 10 seconds when there are messages that have not been reviewed Message playback To play messages at the telephone base Press gt E PLAY when the phone is not in use OR 1 Press MENU when the phone is not in use 2 Press SELECT to select Play messages Options during playback e Press V VOL or VOL A to adjust the message playback volume e Press BP SKIP to skip to the next message e Press 4 REPEAT to repeat the message Press REPEAT twice to hear the previous message e Press X DELETE to delete the playing message The system advances to the next message e Press STOP or 5 to stop the playback To play messages with a cordless handset 1 Press MENU when the phone is not in use 2 Press SELECT to select Play messages O
30. nce exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Privacy of communications may not be ensured when using this telephone The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met The Ringer Equivalence Number REN for this terminal equipment is 0 1 The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five This product meets the applicable Industry Canada technical specifications RF radiation exposure statement The handset complies with FCC RF radiation exposure limits set forth for an uncontrolled environment The handset should be installed and operated with a minimum distance of 8 in 20 cm between the handset and all persons body Use of other accessories may not ensure compliance with FCC RF exposure guidelines This transmitter must not be co located or operaning in conjunction with any other antenna or transmitter This equipment complies also with pausi Canada RSS 102 with respect to Canada s Health Code 6 for Exposur
31. nnect the equipment into an outletona circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications to this equipment not expressly approved by the party responsible for the user s compliance could voi authority to operate the equipment This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause unde sired operation To ensure safety of users the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product This roduct has been tested and found to comply with the CC criteria The handset shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in 20 cm or more This Class B digital apparatus complies with Canadian requirement CAN ICES 3 B NMB 3 B FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council tor Terminal Attachments ACTA The label on the back or bottom of this equipment contains among other Inings a product identifier in the format US AAAEQ T XX This
32. nt research entity led a aE aly evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers Sanya by the U S Food and Drug Sakan R recommends to physicians at Pacemaker patients e Should keep wireless telephones at least six inches from the pacemaker e Should NOT place wireless telephones directly over the pacemaker such as in a breast pocket when it is turned ON e Should use the wireless telephone at the ear opposite the pacemaker WTR s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones About cordless telephones e Privacy The same features that make a cordless telephone convenient create some limitations Telephone calls are transmitted between the telephone base and the cordless handset by radio waves so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset For this reason you should not think of cordless telephone conversations as being as private as those on corded telephones e Electrical power The telephone base of this cordless telephone must be connected to a working electrical outlet The electrical outlet should not be controlled by a wall switch Calls cannot be made from the cordless handset if the telephone base is unplugged switched off or if the electrical power is interrupted e Potential T
33. ntil the problem has been corrected Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents For repair procedures follow the instructions outlined under the Limited warranty If this equipment is causing harm to the telephone network the telephone service provider may temporarily discontinue your telephone service The telephone service provider is required to notify you before interrupting service If advance notice is not practical you will be notified as soon as possible You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC Your ee service provider may make changes in its facilities equipment operation or procedures that could affect the proper functioning of this product The telephone service provider is required to notify you if such changes are planned If this product is equipped with a corded or cordless handset it is hearing aid compatible If this product has memory dialing locations you may choose to store emergency telephone numbers e g police fire medical in these locations If you do store or test emergency numbers please Remain on the line and briefly explain the reason for the call before hanging up Perform such activities in off peak hours such as early morning or late evening Industry Canada This device complies with Industry Canada lice
34. off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers Please call 1 800 8 BATTERY for information on Ni MH battery recycling and disposal bans restrictions in your area VTech s involvement in this program is part of its commitment to protecting our environment and conserving natural resources RBRC and 1 800 8 BATTERY are registered trademarks of the Rechargeable Battery Recycling Corporation FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a ae installation If this equipment does cause armful interference to radio or television reception which can be determined by tuming the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Co
35. or CS6648 3 CS66493 3 Abridged user s manual Telephone base overview 1 LCD display 2 IN USE light e On when the phone is in use or when the answering system is answering a call e On when a handset is being registered e Flashes when there is an incoming call e Flashes when handsets are being deregistered e Flashes when another telephone on the same line is in use 3 FLASH e Answer an incoming call when you receive a call waiting alert CANCEL e Return to the previous menu or idle mode without making changes e Press and hold to erase the missed call indicator when the phone is not in use e While the phone is ringing press to silence the base ringer temporarily vCID e Review the caller ID log when the telephone is not in use e Scroll down while in a menu or in the directory caller ID log or redial list e Move the cursor to the left when entering numbers or names e Decrease the listening volume during a call or message playback AW e Review the directory when the phone is not in use e Scroll up while in a menu or in the directory caller ID log or redial list e Move the cursor to the right when entering numbers or names e Increase the listening volume during a call or message playback MENU SELECT e Show a menu e While in a menu press to select an item or save an entry or setting INT e Press to initiate or answer an intercom call or to transfer a call FIN
36. p Make sure you have set the date and time See Configure your telephone section The messages on the answering system are incomplete lf a caller leaves a very long message part of it may be lost when the answering system disconnects the call after the preset recording time lf the memory on the answering system becomes full during a message the answering system stops recording and disconnects the call While the handset is not in use press MENU and then enter 364 to change the handset LCD language back to English accidentally set my LCD language to Spanish or French and don t know how to change it back to English Important safety instructions When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury including the following 1 Read and understand all instructions 2 Follow all warnings and instructions marked on the product 3 Unplug this product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a dry non abrasive cloth for cleaning 4 Do not use this product near water such as near a bath tub wash bowl kitchen sink laundry tub ee swimming pool or in a wet basement or shower 5 Do not place this product on an unstable table shelf stand or other unstable surfaces 6 Avoid placing the telephone system in places with extreme temperature direct sunlight or
37. ptions during playback e Press W VOLUME or A VOLUME to adjust the message playback volume e Press 6 to skip to the next message e Press 4 to repeat the message Press 4 twice to hear the previous message e Press 3 or DELETE to delete the playing message The system advances to the next message e Press OFF to stop the playback Delete all old messages You can only delete old reviewed messages You cannot delete new messages until you review them You cannot retrieve deleted messages To delete all messages with the telephone base 1 Press X DELETE twice when the phone is not in use To delete all old messages with a handset 1 Press MENU when the phone is not in use 2 Press or Ato scroll to Answering sys then press SELECT 3 Press V or Ato scroll to Delete all old and then press SELECT twice Remote access A two digit security code is required to access the answering system remotely from any touch tone telephone The preset code is 19 You can use this preset code or set your own 1 Dial your telephone number from any touch tone telephone 2 When the system plays your announcement enter the two digit security code 3 Enter one of the following remote commands pd Play all messages a Play only new messages Delete the current message during playback p88 Delete all old messages Repeat the current message during playback s fso OO Hear a list of remote commands Skip to th
38. r VolP service the existing telephone jacks in your home may no longer work Contact your service provider for solutions The display The handset is deregistered shows To from the telephone base To register HS and register it back See manual 1 Press and hold alternately The FIND HANDSET on the handset does not telephone base for about work at all four seconds until the IN USE light turns on and it shows Registering Press QUIET on the handset The handset shows Registering Both the telephone base and cordless handset show Registered and you hear a beep when the registration process completes This process takes about 60 seconds If registration fails the handset displays Failed Repeat steps 1 to 2 again The answering system does not record messages Make sure the answering system is on When the answering system is on ANS ON should display on the handset and the telephone base When the answering machine memory is full it does not record new messages until some old messages are deleted The answering system does not record messages If you subscribe to voicemail service change the number of rings so that your answering system answers before your voicemail service answers To determine how many rings activate your voicemail service contact your telephone service provider The answering system does not announce the correct day of the week for recorded messages time stam
39. r the month MM date DD and year YY Then press SELECT 2 Use the dialing keys 0 9 to enter the hour HH and minute MM Then press or A to choose AM or PM 3 Press SELECT to save Check for dial tone Press ya If you hear a dial tone the installation is successful If you do not hear a dial tone e Make sure the installation procedures described above are properly done e It may be a wiring problem If you have changed your telephone service to digital service from a cable company or a VoIP service provider the telephone line may need to be rewired to allow all existing telephone jacks to work Contact your cable VoIP service provider for more information Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission FCC Even so this handset and telephone base can communicate over only a certain distance which can vary with the locations of the telephone base and handset the weather and the layout of your home or office When the handset is out of range the handset displays Out of range or no pwr at base lf there is a call while the handset is out of range it may not ring or if it does ring the call may not connect well when you press x Move closer to the telephone base then press ss to answer the call If the handset moves out of range during a telephone conversation there may be interference To improve reception move clo
40. ring a call press MUTE on the handset The handset displays Muted until the mute function is turned off 2 Press MUTE on the handset again to resume the conversation The handset displays Microphone on briefly OR 1 During a call press MUTE on the telephone base The telephone base displays Muted and the MUTE light turns on until the mute function is turned off 2 Press MUTE on the telephone base again to resume the conversation The telephone base displays Microphone on briefly Transfer a call While on an outside call you can transfer the call from a cordless handset to another handset or the telephone base 1 During a call press MENU 2 Press V or A to scroll to Transfer then press SELECT 3 Your handset shows Transfer to Press 7 for the telephone base or 1 5 for HANDSET 1 to HANDSET 5 4 To answer the call on the destination handset press x or any dialing key on the handset or lift the corded handset or press SPEAKER or any dialing key on the telephone base Join a call in progress You can use the telephone base and a cordless handset or two cordless handsets at a time on an outside call e When a handset or the telephone base is already on a call press s or on another handset to join the call e Press OFF or place the handset in the handset charger to exit the call The call continues until both devices hang up OR e Lift the corded handset or press SPEAKER on the telep
41. rposes including but not limited to Products used for rental purposes 7 Product returned without a valid proof of purchase see item 2 below or 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in Canada please visit our website at www vtechcanada com or call 1 800 267 7377 NOTE Before calling for service please review the users manual a check of the Product s controls and features may save you a service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product s to the service location VTech will return repaired or replaced Product under this limited warranty Transportation delivery or handling charges are prepaid VTech assumes no risk for damage or loss of the Product in transit If the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty What must you return with the Product to get warranty service
42. ser to the telephone base Using the telephone base handset menu You can use the telephone base or a cordless handset to change your telephone settings 1 Press MENU when the phone is not in use 2 Press or A until the screen displays the desired feature menu 3 Press SELECT to enter that menu e To return to the previous menu press CANCEL e To return to idle mode press and hold CANCEL Configure your telephone Set language The LCD language is preset to English You can select English French or Spanish to be used in all screen displays 1 Press MENU when the handset telephone base is not in use 2 Press V or A to scroll to Settings then press SELECT 3 Press SELECT to select LCD language 4 Press or A to select English Fran ais or vEspanol then press SELECT Set date and time 9 NOTE Make sure you set the date and time including the year correctly otherwise the answering system does not announce the correct day of the week for your recorded messages time stamp 1 Press MENU when the handset telephone base is not in use 2 Press V or A to scroll to Set date time then press SELECT 3 Use the dialing keys 0 9 to enter the month MM date DD and year YY Then press SELECT 4 Use the dialing keys 0 9 to enter the hour HH and minute MM Then press V or A to choose AM or PM 5 Press SELECT Temporary tone dialing If you have pulse rotary service only
43. the intercom call at the telephone base press SPEAKER INT any dialing key or lift the corded handset 3 To end the intercom call on either handset one party presses OFF or places the handset back in the handset charger OR To end the intercom call at the telephone base press INT or SPEAKER when using the base speakerphone or place the corded handset back to the telephone base To initiate an intercom call at the telephone base 1 Press INT on the telephone base when the phone is not in use 2 To answer the intercom call on the destination handset press s INT or any dialing key 3 To end the intercom call at the telephone base press INT or SPEAKER when using the base speakerphone or place the corded handset back to the telephone base OR To end the intercom call on the destination handset press OFF or place the handset back in the handset charger Answer an incoming call during an intercom call If you receive an incoming outside call during an intercom call you will hear an alert tone To answer on a cordless handset To answer the call press The intercom call ends automatically e To end the intercom call without answering or canceling the incoming call press OFF The telephone continues to ring To answer at the telephone base Press SPEAKER or place the corded handset back to the base The intercom call ends automatically Then press SPEAKER or lift
44. then press SELECT twice The system announces To play press 2 To record press 7 Press 2 to play the current announcement Options during playback Press W VOLUME or A VOLUME on the cordless handset or V VOL or VOL A on the telephone base to adjust the listening volume Press 5 to stop playback Delete your announcement 1 2 3 Press MENU when the phone is not in use Press V or A to scroll to Answering sys then press SELECT twice The system announces To play press 2 To record press 7 Press 3 or DELETE to delete your recorded announcement 9 NOTE When your announcement is deleted calls are answered with the default announcement Set number of rings You can set the answering system to answer an incoming call after two three four five or six rings or toll saver If you choose toll saver the answering system answers a call after two rings if you have new messages or after four rings when there are no new messages This enables you to check for new messages and avoid paying unnecessary long distance charges when you are calling from outside your local area 1 2 3 iN Press MENU when the phone is not in use Press V or Ato scroll to Answering sys then press SELECT Press V or Ato scroll to Ans sys setup then press SELECT Scroll to of rings then press SELECT Press V or Ato select 2 43 4 95 96 or Toll saver and then press SELECT Set recording ti
45. xtension cords 13 Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions e When the power supply cord or plug is damaged or frayed If liquid has been spilled onto the product If ue product has been exposed to rain or water e If the product does not operate normally b following the operating instructions Adjus only those controls that are covered by the petal instructions Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation e Ifthe product has been dropped and the telephone base and or handset has been damaged e If the product exhibits a distinct change in performance 14 Avoid using a telephone other than cordless during an electrical storm There is a remote risk of electric shock from lightning 15 Do not use the telephone to report a gas leak in the vicinity of the leak Under certain circumstances a spark may be created when the adapter Aa ha into the wall outlet or when the handset is replaced in its cradle This is acommon event associated with the closing of a electrical circuit The user should not plug the phone into a wall outlet and should not put a charged handset into the cradle if the phone is located in an environment containin concentrations of flammable or flame supporting o unless there is adequate ventilat
Download Pdf Manuals
Related Search