Cineroid LED
Contents
1. i E Sen 2 Check to see of if the information on the LCD is displayed properly 3 E A Auto to VM Manual and the current fan speed wil 3 Move the power switch to OFF to turn off the LED light 3 Press the fan control button to adjust the speed of the fan The speed ranges from 1 5 with 1 being the slowest speed 4 The fan will not turn on if the speed is set to zero 5 Setting the fan speed to zero to turn off the fan will result in increasing the heat level of Ss the LED light This will cause the light to automatically turn fan on i 3 if The too high heat level will cause to shut off and a warning HO will appear on the LCD display Cineroid Mounting the Grid J o IEN EN Ae 1 Turn the brightness dial side to side to adjust the brightness 2 The brightness range is from O 30 and the current level is displayed on the LCD 3 Turning the dial to the right increases brightness 4 Turning the dial to the left decreases brightness 5 Adjusting the brightness to zero DOES NOT power off the LED light POWER ysi6uy Adjusting Brightness 1 Mounting the grid will prevent the light from spreading to the sides 2 Line up the magnets on the grid to the lamp to mount the grid 8 LED Light LED Light H2. Cineroid LED Liglit SECULINE Co Ltd SECULINE Co Ltd Cineroid LED Light O Product Specifications Light angle 135 degree Power DC 6 17V Weight 189g Size 75 X 93 X 43 mm O Optional Products Remarks power the light 2 12V 2A power is recommended for external power 3 Remove the battery mount plug from the body 4 Insert the power plug from the external power source DC plug with D tap for PAO1 ysi6uy DC plug only for PAO1 Warning Displays Power Adapter 1 The LCD will show a few warning displays 2 Ho Internal temperature is too hot 3 Low battery Hand Grip 10 LED Light LED Light 11 Cineroid LED Light We will strive to create the best products and provide superb service Customer Support Center
3. place 41 4 Screw mount 3 Attempting to mount the lamp incorrectly or in the opposite direction may result in a partially lit lamp or damage to the unit itself 4 To detach the lamp from the body simply lower the levers on both sides of the lamp together 5 If the lamp is not mounted properly a warning light will appear on the front top right corner of the LED light ysi6uy Installing the Battery 1 Attach the battery mount to the back of the body with the use of the two screws on the mount 2 Connect the cable on the battery mount to the body 3 Attach the battery to the battery mount 4 Be sure to fully charge the battery before installing 5 The warning light will come on when the battery is running out of power Battery 6 LED Light LED Light 7 Cineroid LED Ligmt SECULINE Co Ltd SECULINE Co Ltd Cineroid LED Light Adjusting Fan Speed 3 Al 5J 5 MEW MEW MEW MEW Cineroid Cineroid Cineroid 5 Cineroid D d lett Ou d DI He at m5 aa It ag P KORR s in Dull I EOL OFF JON H OFF JON oF oF POWER POWER POWER et ek SE SE 1 The Cineroid LED light has a built in fan to control the heat level 2 Adjust the speed of the fan to reduce noise in shooting situations 1 Move the power switch to ON to turn on the LED light
4. Cineroid LED Ligh USD Model L2C 5K Daylight L2C 3K Tungsten L2C 3K5K Tungsten Daylight Cineroid Cinema amp Broadcasting Equipment Cineroid LED Ligmt SECULINE Co Ltd SECULINE Co Ltd Cineroid LED Light Thank you for purchasing the Cineroid LED light Safety Precautions The Cineroid LED employs a very high color rendering index CRI Please observe the following safety precautions as they are meant for It displays a very stable color temperature and brightness so that the safe and proper use of the product to reduce the risk of accidents both motion pictures and still images can be taken in their most Upon reading the user manual keep it in a safe and available place natural color tones Please read this user manual thoroughly before using the Cineroid LED Do not use any batteries power cord or accessories that are not specified in this document Test Before Operating When using a power cord be sure to plug it in completely Do not handle power plugs It is recommended to test the Cineroid LED before use Make sure when your hands are wet When unplugging the power cord grasp the plug body the light comes on when powered and that the brightness control EE works properly Power cords that are scratched heavily bent or twisted can potentially be hazardous and a source of electric shock and or fire Copyrights and Prohibitions Do not insert foreign objects into the product s electric or
5. Light SECULINE Co Ltd Table of Contents Safety Precautions 3 Table of Contents ceccesssecessecccssecceceseececesseeesseceesseneeeeees 4 CONPIQUIATION ooo E EEEE EE E E EA E EEE 5 ee 6 Mounting Detaching the Lamp 7 Installing the Battery oo iccccessssccccssseccssseceessescessereeeesnseeees 7 Powering On Off cccssscsscssscsscssssescsececscsessccacscsesaccetaeseeacens 8 Adjusting Brightn Ss o ccssscsceccssccesssecessnccesseececessseeeessas 8 Adjusting Fan Gpeed o uu eeeeescesscceeseceeecceceeeeesceesceeseseeeneers 9 Mounting the Gd 9 Connecting External Power 10 Warning Displays eeeeeesecccececeecceecceceeceesecerseccesacesseseesees 10 Product Specifications o oo eeeececcessecceeeceeseceseeceeseeeseceeeees 11 LED Light SECULINE Co Ltd Cineroid LED Light Configuration e A N Y A So gt Ke inst es D Battery G Charger H Manual LED Light 5 Cineroid LED Ligmt SECULINE Co Ltd SECULINE Co Ltd Parts Mounting Detaching the Lamp Q Q Remote controller Socket o Dimmer OUR R R LE LOD Display FAN Mode mounting g G Power ON OFF the lamp L DC in 2 The lamp has a top and bottom Make sure the arrow on the front the lamp is pointing up when mounting Press the lamp firmly onto the body until you hear a clicking sound Fan speed control and it locks into
6. cable components The use of images of people property and places without Do not place the power cord near sources of heat as this may melt or cause damage to gt permission can be prohibited by law Please refer to your regions the cord potentially causing fire or electric shock z laws regarding copyrights and prohibitions Do not disassemble or modity the product This may damage the product and cause gt danger due to a malfunction Please keep the product out of reach of young children Injuries may occur due to damage to the product Canon and EOS are registered trademarks of Canon e When using the product in an airplane or hospital setting it is recommended to acquire O Nikon is a registered trademark of Nikon authorization first as signals or electro magnetic waves from the product may cause other O Sony is a registered trademark of Sony BEER Do not store the product in a dusty or humid environment as damage may occur When the product is mounted on a camera do not lift or move the camera by grabbing the product This may cause damage to the product or the camera mount Do not clean the product with paint thinner benzene or other volatile solvents This may cause damage to the product and become a fire hazard This product is not waterproof If the product is dropped in water contact the service center immediately 2 LED Light LED Light 3 Cineroid LED
Download Pdf Manuals
Related Search