product manuals
Contents
1. LENO X TT 500 TURNTABLE CASSETTE PLAYER WITH PC LINK FUNCTION FOR RECORDING INSTRUCTION MANUAL READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE 500 TURNTABLE CASSETTE PLAYER WITH PC LINK FUNCTION FOR RECORDING 1 Intended use This product is designed for the playback of records and audio cassettes The tracks played back can be transferred via USB to a computer and edited using the attached software Moreover the product also features two integrated loudspeakers The product be connected to a mixer or amplifier using the cinch connector Power is supplied by a standard mains socket The product is only to be used indoors in dry conditions For safety and approval purposes CE you must not rebuild and or modify this product If you use the product for purposes other than those described above the product be damaged In addition improper use can cause hazards such as short circuiting fire electric shock etc Read the instructions carefully and keep them Make this product available to third parties only together with its operating instructions 2 Delivery content USB cassette record player USB cable e Software CD Operating instructions 3 Equipment e playback speeds for records 33 1 3 45 and 78 rpm Auto stop function 45RPMe adaptor e Belt drive Ceramic pick up with protective cap e Dust cover 4 Safety instructions Read the operating instructions ca2. au www lenoxx com au
3. back the turntable will automatically stop turning Position OFF At the end of the playback the turntable will continue to turn 6 Loosen the rest clip 7 Lift the pick up arm by using the pick up lift lever and move the pick up toward the record The turntable will begin to rotate 8 Lower the pick up arm onto the record by using the pick up lift lever The playback of the record will begin 9 Now set the volume with the volume control 10 At the end of the playback lift the pick up arm by using the pick up lift lever and move the pick up arm back to the pick up support 11 Lower the pick up arm by using the pick up lift lever and secure the pick up with the rest clip 12 Switch off the product by turning the volume control in an anticlockwise direction Playing back cassettes 1 Switch the device on by turning the volume control in an clockwise direction 2 Insert an audio cassette into the cassette deck The side with the tape has to face to the right side The playback starts automatically 3 Now set the volume with the volume control 4 To fast forward the cassette carefully press the eject button until you hear a click sound The button is now 5 half recessed the housing and the cassette is being fast forwarded 5 The playback or the fast forwarding will stopped automatically when the end of the current cassette side is reached 6 To remove the cassette press the eject button which will then be completely r
4. ecessed in the housing 7 Switch off the product by turning the volume control in an anticlockwise direction 8 Digitalising 1 Connect the product to a computer via the USB cable 2 Insert the software CD and follow the on screen instructions The CD include Audacity 2 0 which can be supported by Window 2000 XP Vista 7 Window version and Mac OS X 10 4 or later MAC version 3 You can find further information on the software functions in the help menu and in the operating instructions of the software These are available at the following links http audacity sourceforge net help documentation 9 Transport 1 Disconnect all lines from the device and disconnect it from the power supply 2 Secure the pick up arm with the rest clip 3 Put the protective plastic covering over the system needle 4 Pack the appliance back into its original packing 10 Cleaning device should only be cleaned with a soft dry cloth or brush from the outside Never use any aggressive cleaning agents or chemical solutions that may damage the surface of the housing e Make sure that the needle protection is in place while cleaning to avoid unnecessary damage to the pick up needle LENODX Lenoxx Electronics Aust Pty Ltd Importers and Wholesalers of Electronics amp Toys 6 Oban court Laverton North Victoria 3026 ABN 97 844 321 851 PH 03 9267 2100 FAX 03 9267 2199 For service call 1300 666 848 Email lenoxx lenoxx com
5. ngled in them Risk of injury e When selecting a place to set up the device avoid direct intense sunlight vibration dust heat cold and moisture e Make sure there no devices with strong electric or magnetic fields such as transformers motors cordless telephones or radio controlled devices in the vicinity of the device as they can cause interferences in the record player Never place the device on valuable or sensitive furniture surfaces without sufficient protection e When selecting the setup location please take into consideration the room layout such as the whereabouts of the nearest mains socket etc playing surface should be isolated from the floor surface 7 Operation Connection 1 Plug the mains plug into a wall mains socket 2 Connect the product to a mixer or amplifier if required Ensure that all devices are turned off Use a suitable cinch cable and connect it to the corresponding connector at the rear of the product as well as the mixer amplifier Playing back records 1 Switch the device on by turning the volume control in a clockwise direction 2 Remove the protective cap from the stylus 3 Put a record on the turntable Place a single adaptor puck on the turntable axis if needed to play single records 4 Set the playback speed 33 45 78 by using the speed control 5 Activate the auto stop function if required using the auto stop control Position ON At the end of the play
6. operation safety or connection of the device e Maintenance modifications and repairs are to be performed exclusively by an expert or at a qualified shop If you have questions which remain unanswered by these operating instructions contact our technical support service or other technical personnel 5 Operating elements im N i 6 Setup e Ensure proper ventilation when setting up the device e Never place the product on soft surfaces such as carpets beds etc e In addition air circulation must not be obstructed by any objects such as magazines tablecloths curtains etc This prevents heat removal from the product and can lead to overheating risk of fire e Make sure that the device is set up securely positioned on a steady surface 4 ih Single adaptor Pick up lift lever Auto stop control Speed regulator Pick up arm Dust cover Volume control Cassette player oO N O oa A W USB connection 10 Cinch connection 11 Power cord e Persons be injured if the device falls down e When setting up the device make sure that the connection cables not squeezed or damaged by sharp edges Always install the cables so that nobody can trip over them or become enta
7. refully and especially observe the safety information If you do not follow the safety instructions and information on proper handling in this manual we assume no liability for any resulting personal injury or damage to property Such cases will invalidate the warranty guarantee Persons Product The device is not a toy Keep it out of the reach of children and pets Do not leave packaging material lying around carelessly These may become dangerous playing material for children e Protect the product from extreme temperatures direct sunlight strong jolts high humidity moisture flammable gases vapors and solvents Do not place the product under any mechanical stress e If it is no longer possible to operate the product safely take it out of operation and protect it from any accidental use Safe operation can no longer be guaranteed if the product 3 is visibly damaged is no longer working properly has been stored for extended periods in poor ambient conditions or has been subjected to any serious transport related stresses Please handle the product carefully Jolts impacts or a fall even from a low height can damage the product Do not place open sources of fire such as burning candles or directly next to the device e Also observe the safety and operating instructions of any other devices which are connected to the product Miscellaneous Consult an expert when in doubt about
Download Pdf Manuals
Related Search