Home

VGN-P series - Sony Europe

1. 2009 Sony Corporation All rights reserved This manual and the software described herein in whole or in part may not be reproduced translated or reduced to any machine readable form without prior written approval Sony Corporation provides no warranty with regard to this manual the software or other information contained herein and hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual the software or such other information In no event shall Sony Corporation be liable for any incidental consequential or special damages whether based on tort contract or otherwise arising out of or in connection with this manual the software or other information contained herein or the use thereof In the manual the or marks are not specified Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice The software described herein is governed by the terms of a separate user license agreement Sony Corporation is not liable and will not compensate for any lost recordings made to your computer external recording media or recording devices or any relevant losses including when recordings are not made due to reasons including your computer failure or when the contents of a recording are lost or damaged as a result of your computer failure or repair undertaken to your computer Sony
2. Certain rechargeable batteries do not meet Sony quality and safety standards For safety reasons this computer only functions with genuine Sony battery packs designed for this model If an unauthorized battery pack is installed the battery will not be charged and the computer will not function 19 Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery To charge the battery pack 1 Install the battery pack 2 Connect the computer to a power source with the AC adapter The charge indicator light turns on while the battery pack is charging When the battery pack charges close to the maximum charge level you selected with the battery charge functions the charge indicator turns off To select your desired maximum charge level see Using the Battery Charge Functions page 21 Charge indicator status Meaning Lit in orange The battery pack is charging Blinks along with the green power The battery pack is running out of power Normal indicator mode Blinks along with the orange power The battery pack is running out of power Sleep mode indicator Blinks fast in orange A battery error has occurred due to a failed battery pack or an unlocked battery pack Charge the battery pack as described in this manual from your first battery charge 20 Z Keep the battery pack in your computer while it is directly connected to AC power The battery pack
3. Click OK At the confirmation prompt click Yes 82 You can also change one of the S button assignments to activate the Multiple Monitors function with the corresponding S button To change the S button assignments press and hold either S button to display the window for changing the assignment Additionally you can set the display colors and resolution for each display and customize the Multiple Monitors function 83 Connecting a USB Device You can connect a Universal Serial Bus USB device to your computer such as a mouse floppy disk drive speaker and printer To connect a USB device 1 Choose the USB port 1 you prefer to use 2 Plug the USB device cable 2 into the USB port Yeo i 84 Notes on connecting a USB device m You may need to install the driver software supplied with your USB device before use See the manual that came with the USB device for more information Be sure to use a USB printer compatible with your version of Windows to print documents For information on how to remove a USB device see the manual that came with the device To protect your computer and or USB devices from damage observe the following Q When moving the computer with USB devices connected avoid exposing the USB ports to shock or impact Q Do not put the computer into a bag or carrying case when it has USB devices connected 85 Customizing Your VAIO Computer This s
4. See the specifications to find out about the configuration of your computer Locating Ports on the Display LAN Adapter Monitor port page 76 Network Ethernet port page 44 Socket for attaching to the AC adapter page 117 gt N E 71 72 Connecting the Display LAN adapter to Your Computer To connect the display LAN adapter to your computer Do not move your computer while the display LAN adapter is connected as it may disconnect the display LAN adapter and cause damage to both units 1 Slide out the I O plug 1 in the direction of the arrow and route the I O plug cable 2 to the right of the tab 3 73 Connecting an Optical Disc Drive To use optical CDs and DVDs with your computer connect an external optical disc drive not supplied to your computer Connecting an Optical Disc Drive Be sure to connect an external optical disc drive before you launch any preinstalled disc operation program To connect an optical disc drive 1 Plug the power cord if any of your external optical disc drive not supplied 1 into an AC outlet Choose the USB port 2 Y you prefer to use Plug one end of a USB cable not supplied 3 into the USB port and the other end to the optical disc drive See the manual that came with your external optical disc drive for the detailed instructions on connecting the USB cable to the drive You t OL 74
5. Taking this into consideration the IEEE 802 119 products are designed to reduce the communication speed to ensure communications with IEEE 802 11b products When the communication speed is not as fast as expected changing the wireless channel on the access point may increase the communication speed 48 Communicating without an Access Point Ad hoc An ad hoc network is a network in which a LAN is created only by wireless devices themselves with no other central controller or access point Each device communicates directly with other devices in the network You can set up an ad hoc network dM 49 To communicate without an access point ad hoc The IEEE 802 11a standard using the 5 GHz band and the IEEE 802 11n draft standard using the 2 4 GHz or 5 GHz band are not available on ad hoc networks Turn on the WIRELESS switch 2 Click the button next to or above your desired wireless option s in the VAIO Smart Network window Make sure the WIRELESS indicator light turns on 3 Click Start and Control Panel Click View network status and tasks under Network and Internet 5 Click Set up a connection or network in the left pane The Set up a connection or network window appears 6 Select an option to specify the ad hoc network settings and click Next 7 Follow the on screen instructions 50 Communicating with an Access Point Infrastructure An infrastructure network is a network that extends an existing wired local netw
6. such as your current location or nearby area information This feature is integrated into the Internet Explorer and appears as one of its toolbars as shown below when you launch the Internet Explorer To view your current location click the search button Google Maps in the following example For detailed information on the VAIO Location Search click Settings Help on the toolbar to see the help file E Current Location N Ee X C Googte Maps M 2 Shown above is the English toolbar as an example Customizing the VAIO Location Search You can change settings such as location log file settings and security settings to customize the VAIO Location Search To customize the VAIO Location Search 1 Click Start All Programs and VAIO Control Center 2 Click Location Info GPS and then VAIO Location Search Settings 3 Select the desired tab in the right pane and change the settings 4 Once finished click OK Alternatively you can click the Settings Help icon on the VAIO Location Search toolbar to access the setup window Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer Using the Noise Canceling Headphones page 65 Connecting a Display LAN Adapter page 71 Connecting an Optical Disc Drive page 73 Connecting External Speakers or Headphones page 75 Connecting an External Display page 76 Selecting Display Modes page 78 Using the Mu
7. Disconnecting an Optical Disc Drive You can disconnect an optical disc drive when your computer is on or off Disconnecting the drive when the computer is in a power saving mode Sleep or Hibernate may cause the computer to malfunction To disconnect an optical disc drive To disconnect an optical disc drive when your computer is off skip steps 1 to 5 Close all software applications accessing the optical disc drive Double click the Safely Remove Hardware icon on the taskbar Select the optical disc drive you want to disconnect Click Stop Follow the on screen instructions to disconnect the optical disc drive oar WN Disconnect the optical disc drive from the computer 75 Connecting External Speakers or Headphones You can connect external sound output devices not supplied such as speakers or headphones to your computer To connect external speakers a Make sure your speakers are designed for computer use Turn down the volume of the speakers before you turn them on The noise canceling function does not work on sound output through external speakers Connect external speakers 1 to the headphones jack 2 Q with a speaker cable 3 not supplied Q l2 76 Connecting an External Display You can connect an external display not supplied to your computer For example you can use the computer with a computer display or a projector A Connect the power cord of your external display
8. Fi Alliance both WPA2 and WPA are specifications of standards based on interoperable security enhancements that increase the level of data protection and access control for existing Wi Fi networks WPA is designed to be forward compatible with the IEEE 802 11i specification It utilizes the enhanced data encryption Temporal Key Integrity Protocol TKIP in addition to user authentication using 802 1X and Extensible Authentication Protocol EAP Data encryption protects the vulnerable wireless link between clients and access points Besides that there are other typical LAN security mechanisms to ensure privacy such as password protection end to end encryption virtual private networks and authentication WPA2 the second generation of WPA provides stronger data protection and network access control and is also designed to secure all versions of 802 11 devices including 802 11b 802 11a 802 119 and 802 11n draft standard multi band and multi mode In addition based on the ratified IEEE 802 11i standard WPA2 provides government grade security by implementing the National Institute of Standards and Technology NIST FIPS 140 2 compliant AES encryption algorithm and 802 1X based authentication WPA2 is backward compatible with WPA See the specifications to find out about the configuration of your computer The IEEE 802 11b g standard is a wireless LAN standard using the 2 4 GHz band The IEEE 802 119 standard provides higher speed communications t
9. activate Hibernate mode Press the Fn F12 keys The computer enters Hibernate mode Alternatively you can click Start the arrow next to the Lock button and Hibernate to place the computer into Hibernate mode A Hibernate mode requires more time than Sleep mode to be activated Hibernate mode uses less power than Sleep mode Do not move your computer before its power indicator light turns off 101 To return to Normal mode Slide the power switch in the direction of gt on the switch The computer returns to its normal state If you slide in the direction of gt on the switch and hold the power switch for more than four seconds your computer will turn off automatically A It takes more time to return to Normal mode from Hibernate mode than from Sleep mode You can use the VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid This power resuming preference will be lost if you remove both the AC adapter and the battery pack See Using the VAIO Control Center page 96 102 Using the VAIO Power Management Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption The VAIO Power Management is a software application developed exclusively for VAIO computers With this software application you can enhance the Windows power management functions to ensure better operation of your computer and longer
10. and simultaneous output to both Fn Q Q F9 F10 zoom Changes the size of an image or a document displayed on some software To make the view look smaller and further away zoom out press the Fn F9 keys To make the view look bigger and closer zoom in press the Fn F10 keys See the help file included with the VAIO Control Center for more information 28 Combinations Feature Functions Fn F12 hibernate Provides the lowest level of power consumption When you execute this command the states of the system and the connected peripheral devices are saved to the built in storage device and the system power is turned off To return the system to its original state use the power switch to turn on the power For details on power management see Using the Power Saving Modes page 97 29 Using the Pointing Device The keyboard contains a cursor pointing device the pointing stick 1 You can point to select drag and scroll objects on the screen using the pointing stick in combination with the buttons located below the space bar The pointer 2 moves in the direction that you push the pointing stick The stronger you push the pointing stick the faster moves the pointer 30 Action Description Point Push the pointing stick to place the pointer on an item or object Click Press the left button 3 or tap
11. file used with the Internet Explorer to the bookmark files of the browser used with the Instant Mode To share bookmarks 1 Click Start All Programs and VAIO Control Center 2 Click Instant Mode and then Bookmark Settings 3 Follow the on screen instructions 33 Using the Built in Camera Your computer is equipped with a built in MOTION EYE camera With the preinstalled image capture software you can perform the following operations QO Capturing still images and movies QO Sensing and capturing object movements for monitoring purposes Editing captured data Turning on the computer activates the built in camera Video conference is possible with the appropriate software Launching or exiting your instant messaging or video editing software does not activate or deactivate the built in camera Do not place your computer into Sleep or Hibernate mode while you are using the built in camera You cannot operate the built in camera with the Microsoft Windows Movie Maker software To use the preinstalled image capture software 1 Click Start All Programs ArcSoft WebCam Companion 2 and WebCam Companion 2 2 Click the desired icon in the main window For detailed information on how to use the software see the help file included with the software When capturing an image or a movie in a dark place click the Capture icon or the Record icon in the main window and then click the WebCam Settings icon and select the low light or l
12. follow these steps Be sure to use the device that is designed to format the media and supports the Memory Stick when formatting the media Formatting the Memory Stick erases the entire data on the media Before formatting the media make sure that it does not contain your valuable data Do not remove the Memory Stick from the slot while formatting This could cause a malfunction Carefully slide the Memory Stick into the slot until it clicks into place Click Start and Computer to open the Computer window Right click the Memory Stick icon and select Format Click Restore device defaults km OD a The size of the allocation unit and file system may change Do not select NTFS from the File system drop down list as it may cause a malfunction 4 The formatting process will be completed more quickly if you select Quick Format in Format options 5 Click Start Follow the on screen instructions It may take time to format the Memory Stick depending on the media type 38 Notes on Using the Memory Stick Q Your computer has been tested and found compatible with Sony branded Memory Stick with capacity of up to 16 GB that are available as of January 2009 However not all the Memory Stick that meet the same specifications as the compatible media are guaranteed of compatibility Q Inserting a Memory Stick with multiple conversion adaptors is not guaranteed of compatibility Q MagicGate is the general name of the copyright pr
13. in Storage Device page 116 Handling the Display LAN Adapter page 117 Ooovoovovoodoesdsno 106 Handling the LCD Screen m m Q Do not leave the LCD screen facing the sun This could damage the LCD screen Be careful when using your computer near a window Do not scratch the surface of the LCD screen or exert pressure on it This could cause a malfunction Using your computer in low temperature conditions may produce a residual image on the LCD screen This is not a malfunction When the computer returns to normal temperature the screen returns to normal A residual image may appear on the LCD screen if the same image is displayed for a long period of time The residual image disappears after a while You can use a screen saver to prevent residual images The LCD screen becomes warm during operation This is normal and does not indicate a malfunction The LCD screen is manufactured using high precision technology You may however see tiny black points and or bright points red blue or green that continuously appear on the LCD screen This is a normal result of the manufacturing process and does not indicate a malfunction Avoid rubbing the LCD screen This could damage the screen Use a soft dry cloth to wipe the surface of the LCD screen Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options available for selection as this may make your computer u
14. large sizes supplied with the headphones PE 67 The noise canceling function is to reduce low frequency noise in the ambient environment but not high frequency noise Nor is it to implement a 100 noise free audio environment When the noise canceling function does not seem to be working unplug the supplied noise canceling headphones completely and then plug them back again Keep the built in microphone 1 of the noise canceling headphones unblocked to ensure that the noise canceling function can be fully in effect You may hear a soft hissing noise while the noise canceling function is enabled This is just operational noise that the function generates and does not indicate a malfunction You may feel that the noise canceling function has little effect or ambient noise seems even louder depending on the type of noise or the degree of quietness in your environment In such a case disable the noise canceling function Use of a mobile phone may cause radio interference with the noise canceling headphones When using the headphones keep mobile phones away from the headphones Plugging or unplugging the noise canceling headphones generates noise This is normal and does not indicate a malfunction Be sure to take off the headphones from your ears before plugging or unplugging the headphones Enabling disabling the noise canceling function or enabling disabling sound with the Windows volume controls generates noise This is caused by swi
15. password leave the Enter New Password and Confirm New Password fields blank and press the Enter key Press the lt or gt key to select Exit select Exit Setup and then press the Enter key At the confirmation prompt press the Enter key 91 To change or remove the power on password user password 1 Turn on the computer 2 Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears 3 Enter the user password and press the Enter key Press the lt or gt key to select Security to display the Security tab select Set User Password and then press the Enter key 5 Onthe password entry screen enter the current password once and a new password twice and then press the Enter key To remove the password leave the Enter New Password and Confirm New Password fields blank and press the Enter key 6 Press the or gt key to select Exit select Exit Setup and then press the Enter key At the confirmation prompt press the Enter key 92 Adding the Hard Disk Password The hard disk password provides additional security for the data stored on your built in storage device If you enable the hard disk password this adds an extra level of security When adding the hard disk password you must set both the master and user passwords The master password is provided for users with administrative rights on the computer to reset th
16. reset it A reset fee will be charged How can change the boot device order You can use one of the BIOS functions to change the boot device order Follow these steps 1 2 oa kf Ww Turn on your computer Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears Press the lt or gt key to select Boot Press the or key to select the drive whose boot device order you want to change Press the F5 or F6 key to change the boot device order Press the lt or gt key to select Exit select Exit Setup and then press the Enter key At the confirmation prompt press the Enter key 126 Why doesn t my screen turn off after the automatic turn off time has passed The VAIO original screen saver disables the timer setting which you can select using the Windows power options for your screen to turn off Select a screen saver other than the VAIO original screen saver What should do if cannot boot my computer from the external device connected to the computer To boot your computer from the external device for example the USB floppy disk drive and the USB optical disc drive you need to change the boot device Turn on your computer and press the F11 key when the VAIO logo appears 127 How do reduce the volume of the recovery partition Your built in storage device contains the recovery partition whe
17. the Enter key 89 To add the power on password user password Make sure you set the machine password before setting the user password Turn on the computer 2 Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears 3 Enter the machine password and press the Enter key Press the lt or gt key to select Security to display the Security tab select Set User Password and then press the Enter key 5 On the password entry screen enter the password twice and press the Enter key The password can be up to 32 alphanumeric characters including spaces long 6 Press the lt or gt key to select Exit select Exit Setup and then press the Enter key At the confirmation prompt press the Enter key 90 Changing Removing the Power on Password To change or remove the power on password machine password 1 2 Turn on the computer Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears Enter the machine password and press the Enter key Press the lt or gt key to select Security to display the Security tab select Set Machine Password and then press the Enter key On the password entry screen enter the current password once and a new password twice and then press the Enter key To remove the
18. the VAIO Link web site at http www vaio link com Finding More about Your VAIO Computer This section provides support information about your VAIO computer Onm Oooo gt Printed Documentation Quick Start Guide An overview of components connection set up information etc Troubleshooting and Recovery Guide Regulations Guarantee EULA and Service Support On screen Documentation User Guide This manual Features of your computer and information about solving common problems To view this on screen guide 1 Double click the VAIO User Guide icon on the desktop 2 Open the folder for your language 3 Select the guide you want to read You can manually browse to the user guides by going to Computer gt VAIO C your C drive gt Documentation gt Documentation and opening the folder for your language Windows Help and Support A comprehensive resource for practical advice tutorials and demonstrations to help you learn to use your computer To access Windows Help and Support click Start and Help and Support or press and hold the Microsoft Windows key and press the F1 key 3 Support Web Sites If you have any problem with the computer you can visit the VAIO Link web site at http www vaio link com for troubleshooting Before contacting VAIO Link by telephone try to solve the problem by reading the supplied documentation and visiting other Sony web sites Q For more about VAIO and becom
19. those illustrated below in some countries or areas 1 Fit the socket on the display LAN adapter onto the attachment projection on the side of the AC adapter with the cable J 118 Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer Many problems have simple solutions Try these suggestions before contacting VAIO Link Features and options in this section may not be available on your computer Computer page 120 System Security page 129 Battery page 130 Instant Mode page 132 Built in Camera page 134 Networking page 136 Bluetooth Technology page 141 GPS page 145 Display page 146 Printing page 149 Microphone page 150 Speakers page 151 Pointing Device page 152 Keyboard page 153 Floppy Disks page 154 CUUOOKDDODODODOOOODODOD Q Audio Video page 155 Q Memory Cards page 157 Q Peripherals page 158 119 120 Computer What should do if my computer does not start m Q m Q OU Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit Make sure the battery pack is installed properly and charged Disconnect all connected USB devices if any If your computer is plugged into a power strip or an uninterruptible power supply UPS make sure the power strip or UPS is plugged into a power source and turned on If you are using an extern
20. unsaved data Going back to the previous work state is impossible To avoid loss of data you should save your data frequently To return to Normal mode Press any key Q Slide the power switch in the direction of gt on the switch If you slide in the direction of gt on the switch and hold the power switch for more than four seconds your computer will turn off automatically You will lose all unsaved data You can use the VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid This power resuming preference will be lost if you remove both the AC adapter and the battery pack See Using the VAIO Control Center page 96 99 If the computer is not used for a certain period of time it will enter Sleep mode To modify this you can change the Sleep mode settings To change the Sleep mode settings 1 Right click the power status icon on the taskbar and select Power Options 2 Click Change plan settings under the current power plan 3 Change the time to place the computer into Sleep mode and click Save Changes 100 Using Hibernate Mode In Hibernate mode the state of the system is saved on the built in storage device s and power is turned off Even when the battery runs out of power no data will be lost The power indicator light is unlit in this mode A If you do not intend to use your computer for a long period of time place the computer into Hibernate mode To
21. you reformat a Memory Stick back up important data and confirm that the Memory Stick does not contain files you want to keep 1 Copy the data from the Memory Stick onto your built in storage device to save data or images 2 Format the Memory Stick by following the steps in Formatting a Memory Stick page 37 Can copy images from a digital camera using a Memory Stick Yes and you can view video clips that you have recorded with Memory Stick compatible digital cameras Why can t write data to a Memory Stick Some versions of the Memory Stick are equipped with an erasure prevention switch to protect data from accidental erasure or overwriting Make sure the erasure prevention switch is off 158 Peripherals What should do if cannot connect a USB device Q If applicable check the USB device is turned on and using its own power supply For example if you are using a digital camera check if the battery is charged If you are using a printer check if the power cable is connected properly to the AC outlet Q Try using another USB port on your computer The driver software could be installed to the specific port you used the first time you connected the device Q See the manual that came with your USB device for more information You may need to install software before you connect the device Q Try connecting a simple low powered device such as a mouse to test if the port is working at all Q USB hubs may prevent a devi
22. 6 for more information When you connect your computer to the Internet be sure to take appropriate security measures to protect the computer against online threats Depending on the service contract with your ISP you may need to connect an external modem device for example a USB telephone modem a DSL modem or a cable modem to your computer to connect to the Internet For the detailed instructions on connection setups and modem configuration see the manual that came with your modem 44 Using the Network LAN You need the display LAN adapter to connect your computer to 1000BASE T 100BASE TX 10BASE T type networks with an Ethernet network cable Connect one end of a network cable not supplied to the network Ethernet port on the display LAN adapter and the other end to your network For detailed settings and devices needed to connect to the network ask your network administrator You cannot configure your network before connecting the display LAN adapter to your computer See Connecting a Display LAN Adapter page 71 for more information on the display LAN adapter A Your computer can be connected to the network with the default settings Do not plug a telephone cable into the network Ethernet port on the display LAN adapter If the network Ethernet port is connected to one of the telephone lines mentioned below high electric current to the port may cause damage overheating or fire Home intercom speakerph
23. Corporation will not restore recover or replicate the recorded contents made to your computer external recording media or recording devices under any circumstances
24. Memory Stick icon OFF o WIRELESS ON gt lt hGDuo 36 l Be sure to hold the Memory Stick with the arrow pointing in the correct direction as you insert it into the slot To avoid damaging your computer or the media do not force the Memory Stick into the slot if you cannot insert it smoothly Before using a Memory Stick Micro M2 be sure to insert it into an M2 Duo adaptor If you insert the media directly into the Memory Stick slot without the adaptor you may not be able to remove it from the slot To remove a Memory Stick Do not remove the Memory Stick while the Media Access indicator light is lit If you do you may lose data Large volumes of data may take time to load so make sure the indicator is unlit before removing the Memory Stick Insert the Memory Stick slot protector to block any particles from entering the slot when not using the Memory Stick Before moving your computer be sure to insert the Memory Stick slot protector into the slot 1 Check that the Media Access indicator light is unlit 2 Push inthe Memory Stick toward the computer and release The Memory Stick ejects 3 Pull the Memory Stick out of the slot Always remove the Memory Stick gently or it may pop out unexpectedly 37 Formatting a Memory Stick To format a Memory Stick The Memory Stick has been formatted in the factory default setting and is ready for use If you want to reformat the media with your computer
25. SONY User Guide Personal Computer VGN P series Contents Betore US6 ernennt e heed eee eels 4 Finding More about Your VAIO Computer 0 5 5 Ergonomic Considerations cccccceeeeeeeneeteeeees 7 Getting Started eccceceeeeeneeeeeeeeeseneeeeeeeeeeeeeeeseneeeetenees 9 Locating Controls and Ports 10 About the Indicator Lights 0 00 0 eeeeeeeeeeeteeeeeeeeee 15 Connecting a Power Source ccccceeseeeseteeteteeeeees 16 Using the Battery Pack eeeeeeeeeeeeeeeeneeeeeeeneeees 17 Shutting Down Your Computer Safely eeee 24 Updating Your Computer cceceeseeeeeeeeeeeeeteeeeees 25 Using Your VAIO Computel cccceceeeeeseeeeeeeeeeeeeeees 26 Using the Keyboard ccccesescceeeeseseceeeeeseeceeeeeneeees 27 Using the Pointing Device eerren 29 Using Special function Buttons c eee 31 Using the Instant Mode n e 32 Using the Built in Camera ccccceeeeeeeeeeeeeeeeeeeeeaes 33 Using the Memory Stick cccceccceeseseeeeeteeeeseeeeeees 34 Using Other Modules Memory Cards 0e 39 Using the Internet ec eaa a a 43 Using the Network LAN seses 44 Using the Wireless LAN seese 46 Using the Wireless WAN ecceeeeeeeeeeeeeeeeeeneeeeeeeeeaes 53 Using the Bluetooth Function ecceeeeeeeeeeeeeneee 57 Using the GPS Function ccccceeceeeeeeeeeeeeeteeteeeees 62 Using Peripheral Device
26. acing upward and pointing toward the slot Carefully slide the SD memory card into the slot until it clicks into place Do not force the card into the slot OFF o WIRELESS 0 ON gt sD lt HGDuo CO eae eae If the SD memory card does not go into the slot easily remove it gently and verify you are inserting it in the proper direction To remove an SD memory card Insert the SD memory card slot protector to block any particles from entering the slot when not using the SD memory card Before moving your computer be sure to insert the SD memory card slot protector into the slot Check that the Media Access indicator light is unlit 2 Pushin the SD memory card toward the computer and release The SD memory card ejects 3 Pull the SD memory card out of the slot 41 42 Notes on Using Memory Cards General notes on using the memory card Q Q Q Q Q Be sure to use memory cards that are compliant with the standards supported by your computer Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot To avoid damaging your computer or the media do not force the memory card into the slot if you cannot insert it smoothly Use care when inserting or removing the memory card from the slot Do not force it in or out of the slot Do not remove the memory card while the media access indicator light is lit If you do you may lose data Do not att
27. after connecting all other cables Features and options in this section may not be available on your computer Connecting a Computer Display You need a display LAN adapter to connect a computer display to your computer To connect a computer display 1 If necessary plug one end of the display s power cord 1 into your display and the other end into an AC outlet 2 Plug the display cable 2 into the monitor port 3 on the display LAN adapter 77 Connecting a Projector You can connect a projector for example the Sony LCD projector to your computer You need a display LAN adapter to connect a projector for example the Sony LCD projector to your computer To connect a projector 1 2 3 4 Connect the power cord 1 of your projector into an AC outlet Plug a display cable 2 into the monitor port 3 on the display LAN adapter Plug an audio cable 4 into the headphones jack 5 Q on the computer Plug the display cable and the audio cable into the port and jack on the projector 6 78 Selecting Display Modes When an external display is connected you can select either your computer screen or the connected display to use as the primary monitor If you want to work on your computer screen and the external display at the same time see Using the Multiple Monitors Functi
28. al display make sure it is plugged into a power source and turned on Make sure the brightness and contrast controls are adjusted correctly See the manual that came with your display for more information Unplug the AC adapter and remove the battery pack Wait three to five minutes Reinstall the battery pack plug the AC adapter and then slide the power switch in the direction of gt on the switch to turn on your computer Condensation may cause your computer to malfunction If this occurs do not use the computer for at least one hour Check that you are using the supplied Sony AC adapter For your safety use only the genuine Sony rechargeable battery pack and AC adapter which are supplied by Sony for your VAIO computer 121 What should do if the green power indicator light turns on but my screen remains blank Q Press the Alt F4 keys several times to close the application window An application error may have occurred Q Press the Ctrl Alt Delete keys and click the arrow g next to the Shut down button and Restart Q Slide in the direction of gt on the switch and hold the power switch for more than four seconds to shut down your computer Unplug the AC adapter and leave the computer for about five minutes Then plug the AC adapter and turn on the computer again Turning off your computer with the power switch or the Ctrl Alt Delete keys may cause loss of unsaved data 122 What should do if my computer or software
29. and click the arrow next to the Shut down button and Restart If this procedure does not work slide in the direction of gt on the switch and hold the power switch until the computer turns off Turning off your computer with the power switch may cause loss of unsaved data What should do if the charge indicator light is blinking fast and my computer does not start Q This problem could be due to the battery pack not being installed properly To resolve this problem turn off your computer and remove the battery pack Then reinstall the battery pack to the computer again For details see Installing the Battery Pack page 17 If the problem persists after performing the above it means the installed battery pack is not compatible Remove the battery pack and contact VAIO Link 124 What should do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode Q This problem could be due to the battery pack not being installed properly To resolve this problem turn off your computer and remove the battery pack Then reinstall the battery pack to the computer again For details see Installing the Battery Pack page 17 Q If the problem persists after performing the above it means the installed battery pack is not compatible Remove the battery pack and contact VAIO Link Why does the System Properties window display a slower CPU speed t
30. ate with another Bluetooth device To communicate with another Bluetooth device you first need to set up the Bluetooth function For setting up and using the Bluetooth function search for Bluetooth information using Windows Help and Support 1 Turnonthe WIRELESS switch 2 Click the button next to or above the Bluetooth icon in the VAIO Smart Network window Make sure the WIRELESS indicator light turns on Stopping Bluetooth Communications To stop Bluetooth communications 1 Turn off the Bluetooth device that is communicating with your computer 2 Click the button next to or above the Bluetooth icon in the VAIO Smart Network window 61 62 Using the GPS Function You can view location information in the Internet Explorer window with the VAIO Location Search feature that uses the Global Positioning System GPS Features and options in this section may not be available on your computer See the specifications to find out about the configuration of your computer To use the GPS function 1 Turnonthe WIRELESS switch 2 Click the button next to or above the GPS icon in the VAIO Smart Network window Make sure the WIRELESS indicator light turns on ay Driver software will be installed when you first activate the GPS function on the VAIO Smart Network 63 Using the VAIO Location Search The VAIO Location Search feature takes advantage of GPS functions on a Wide Area Network WAN module to obtain and provide location information
31. attery packs do not meet Sony quality and safety standards For safety reasons this computer only functions with genuine Sony battery packs designed for this model If an unauthorized battery pack is installed the battery pack will not be charged and the computer will not function While the battery pack is in use or being charged heat builds up in the battery pack This is normal and is not cause for concern Keep the battery pack away from all sources of heat Keep the battery pack dry Do not open or try to disassemble the battery pack Do not expose the battery pack to any mechanical shock such as dropping it on a hard surface If you are not using your computer for a long period of time remove the battery pack from the computer to prevent damage to the battery pack If you have not used the battery pack for a considerable amount of time the remaining battery life may become short However this is normal and does not indicate a malfunction because the battery pack will gradually discharge over time even when not in use Connect the AC adapter to your computer and recharge the battery pack before using the computer again You do not need to discharge the battery pack before recharging If the battery pack quickly runs out of power after fully charged it may be reaching the end of its life and should be replaced 114 Using Headphones O Road safety Do not use headphones while driving cycling or operating any motorized vehi
32. battery life See the help file included with the software for more information Selecting a Power Plan When you start the computer a power status icon appears on the taskbar This icon indicates what kind of power source you are using at that time for example AC power Click this icon to display the window that shows your power status The VAIO Power Management function is added to the Windows Power Options To select a power plan 1 Right click the power status icon on the taskbar and select Power Options 2 Select your desired power plan To change the power plan settings 1 Click Change plan settings under your desired power plan in the Power Options window Change the Sleep mode and display settings as needed 2 If you need to change the advanced settings click Change advanced power settings and go to step 3 Otherwise click Save changes 3 Click the VAIO Power Management tab Change the settings for each item 4 Click OK 103 VAIO Power Management Viewer You can view performance with the power plan that was modified with the VAIO Power Management To start the VAIO Power Management Viewer 1 Click Start All Programs and VAIO Control Center 2 Click Power Management and VAIO Power Management Viewer 104 Protecting the Hard Disk If your computer is equipped with a built in hard disk drive then it has the VAIO HDD Protection utility preinstalled for customizing your settings for protecting your hard disk drive again
33. battery pack 1 Turn off the computer and close the LCD screen lid 2 Slide the battery LOCK switch 1 inward 3 Slide and hold the battery RELEASE latch 2 inward and slightly slide the battery pack toward the back of the computer 4 0000 D J opoo 9 LOCK oO 24 Shutting Down Your Computer Safely To avoid losing unsaved data be sure to shut down your computer properly as described below To shut down your computer 1 Turn off any peripherals connected to the computer 2 Click Start the arrow next to the Lock button and then Shut Down 3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically The power indicator light turns off 25 Updating Your Computer Be sure to install the latest updates on your computer with the following software applications so that the computer can run more efficiently QO Windows Update Click Start All Programs and Windows Update and then follow the on screen instructions Q VAIO Update 4 Click Start All Programs VAIO Update 4 and VAIO Update Options and then follow the on screen instructions Your computer must be connected to the Internet to download the updates Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer OvoOKOCUOOUHOOCOUHOOCRD Using the Keyboard page 27 Using the Pointing Device pag
34. cause radio interference and result in reduced communication speeds and distances than the standard values Read the Bluetooth regulations guide before using the Bluetooth function The Bluetooth function may not work with other devices depending on the manufacturer or the software version employed by the manufacturer Connecting multiple Bluetooth devices to your computer may cause channel congestion resulting in poor performance of the devices This is normal with Bluetooth technology and is not a malfunction 59 Bluetooth Security The Bluetooth wireless technology has an authentication function which allows you to determine with whom you choose to communicate With the authentication function you can prevent any anonymous Bluetooth devices from accessing your computer The first time two Bluetooth devices communicate a common passkey a password required for authentication should be determined for both devices to be registered Once a device is registered there is no need to re enter the passkey The passkey can be different each time but must be the same at both ends For certain devices such as a mouse no passkey can be entered 60 Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer a mobile phone a PDA a headset a mouse or a digital camera without the use of any cables A amp A A N MN ce an Kat y Z To communic
35. ccess points Other factors include device configurations radio conditions and software compatibility To maximize the data transfer speed move your computer away from obstacles or closer to any access point you may be using If you are using a wireless LAN access point the device may be temporarily overloaded depending on how many other devices are communicating via the access point If your access point interferes with other access points change the access point channel See the manual that came with your access point for more information Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window Selecting any other option may result in a communication failure Follow the steps in What should I do if my computer cannot connect to a wireless LAN access point page 136 to change the settings 139 How do avoid data transfer interruptions Q Oooo When your computer is connected to an access point data transfer interruptions may occur if a large file is exchanged or the computer is placed in close proximity to microwaves and cordless telephones Move your computer closer to the access point Make sure the access point connection is intact Change the access point channel See the manual that came with your access point for more information Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window Selecting any other option may result in a commu
36. ce from working because of a power distribution failure We recommend you connect the device directly to your computer without a hub 159 Trademarks Sony VAIO the VAIO logo VAIO Control Center VAIO Power Management VAIO Power Management Viewer VAIO Update and BRAVIA are trademarks or registered trademarks of Sony Corporation sT and Memory Stick Memory Stick Duo MagicGate OpenMG MagicGate Memory Stick Memory Stick PRO Memory Stick PRO HG Memory Stick Micro M2 and the Memory Stick logo are trademarks or registered trademarks of Sony Corporation Walkman is a registered trademark of Sony Corporation Blu ray Disc and the Blu ray Disc logo are trademarks of the Blu ray Disc Association Intel Pentium Intel SpeedStep and Atom are trademarks or registered trademarks of Intel Corporation Microsoft Windows Vista the Windows logo and BitLocker are trademarks or registered trademarks of Microsoft Corporation in the U S and other countries i LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection Roxio Easy Media Creator is a trademark of Sonic Solutions WinDVD for VAIO and WinDVD BD for VAIO are trademarks of InterVideo Inc ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft Inc ArcSoft WebCam Companion is a trademark of ArcSoft Inc ATI and ATI Catalyst are trademarks of Advanced Micro Devices Inc The Bluetooth word mark and
37. cimal string of 64 characters Stopping Wireless LAN Communications To stop wireless LAN communications Click the button next to or above the WLAN icon in the VAIO Smart Network window Turning off the wireless LAN function while accessing remote documents files or resources may result in data loss 52 53 Using the Wireless WAN Using the wireless WAN WWAN allows you to extend your network and communicate with each other in a wide range of areas The WWAN may not be available in some countries or areas See Wireless WAN Regulations Guide in Regulations Guarantee EULA and Service Support to find out in which countries or areas the WWAN is available 54 Inserting a SIM Card To use the wireless WAN function you first need to insert a SIM card into the SIM card slot on your computer Your SIM card is contained within a base plate about the size of a credit card a Depending on your country and model you might receive an offer from the VAIO selected telecom operator In that case the SIM card is either in the operator SIM pack inside the carton box or already inserted in the SIM card slot If the SIM card is not provided with your computer you can purchase one from your preferred telecom operator To insert a SIM card 1 Turn off your computer 2 Remove the battery pack from the computer 3 Remove the SIM card 1 by pushing it out from the base plate En 4 Insert the SIM card into the SIM card slot w
38. cle It may create a traffic hazard and is illegal in some areas It can also be potentially dangerous to play loud music while walking especially at pedestrian crossings Q Preventing hearing damage Avoid using headphones at high volume Hearing experts advise against continuous loud and extended play If you experience a ringing in your ears reduce the volume or discontinue use 115 Handling the Memory Stick Do not touch the Memory Stick connector with your finger or metallic objects Use only the adhesive label supplied with the Memory Stick as a label Do not bend drop or expose the Memory Stick Do not disassemble or modify the Memory Stick Do not let the Memory Stick get wet COOCOO DD Do not use or store the Memory Stick in a location subject to Static electricity Electrical noise Extremely high temperatures such as in a car parked in the sun Direct sunlight High humidity Corrosive substances Oovoovw wv Use the storage case supplied with the Memory Stick Be sure to make a backup copy of your valuable data Keep the Memory Stick and the Memory Stick adaptors out of reach of children There is a risk of swallowing them Oovodo When using the Memory Stick Duo do not use a fine tipped pen to write on the label adhered to the Memory Stick Duo Exerting pressure on the media may damage internal components 116 Handling the Built in Storage Device The built in storage device hard disk driv
39. connected and the volume is turned up loud enough to hear sound Make sure your speakers are designed for computer use If your speakers have a muting button set the button to off If your speakers require external power make sure the speakers are connected to a power source See the manual that came with your speakers for more information 152 Pointing Device What should do if my pointing device does not work Q Oooo You may have disabled the pointing device before connecting a mouse to your computer See Using the Pointing Device page 29 Make sure that a mouse is not connected to your computer If the pointer does not move while a software application is running press the Alt F4 keys to close the application window If the Alt F4 keys do not work click Start the arrow next to the Lock button and Restart to restart your computer If your computer does not restart press the Ctrl Alt Delete keys and click the arrow next to the Shut down button and Restart If the Windows Security window appears click Restart If this procedure does not work slide in the direction of gt on the switch and hold the power switch until the computer turns off Turning off your computer with the power switch may cause loss of unsaved data 153 Keyboard What should do if the keyboard configuration is wrong The language layout of your computer s keyboard is labeled on the packaging box If you choose a different regional
40. continues to charge while you are using the computer If the battery charge level falls below 10 you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack Your computer is supplied with a lithium ion battery pack and can be recharged any time Charging a partially discharged battery pack does not affect the life of battery While some software applications or peripheral devices are in use your computer may not enter Hibernate mode even when the remaining battery life is short To avoid loss of data when using battery power you should save your data frequently and manually activate a power management mode such as Sleep or Hibernate If the battery pack wears out when the computer enters Sleep mode you will lose all unsaved data Going back to the previous work state is impossible To avoid loss of data you should save your data frequently When your computer is directly connected to AC power and has a battery pack installed it uses power from the AC outlet 21 Using the Battery Charge Functions You can customize the current battery charging method using the Battery Charge Functions the battery care function and the quick charge function The battery care function makes the life of battery longer and the quick charge function allows you to charge your battery pack quickly A The quick charge function is intended to speed up battery charging while your c
41. cryption key is correct 137 Q Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window Selecting any other option may result in a communication failure To change the settings follow these steps Right click the power status icon on the taskbar and select Power Options Click Change plan settings under the current power plan Click Change advanced power settings Select the Advanced settings tab Double click Wireless Adapter Settings and Power Saving Mode Select Maximum Performance from the drop down list both for On battery and Plugged in oa fF WO ND 138 What should do if cannot access the Internet Q Ooveoo Check the access point settings See the manual that came with your access point for more information Make sure your computer and the access point are connected to one another Move your computer away from obstacles or closer to any access point you may be using Make sure your computer is properly configured for Internet access Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window Selecting any other option may result in a communication failure Follow the steps in What should do if my computer cannot connect to a wireless LAN access point page 136 to change the settings Why is the data transfer speed slow Q The wireless LAN data transfer speed is affected by distance and obstructions between devices and a
42. d 16 Connecting a Power Source You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer Using the AC Adapter a Use only the supplied AC adapter for your computer To use the AC adapter 1 2 3 Plug one end of the power cord 1 into the AC adapter 3 Plug the other end of the power cord into an AC outlet 2 Plug the cable connected to the AC adapter 3 into the DC IN port 4 on the computer im 1 2 To disconnect your computer completely from AC power unplug the AC adapter Make sure that the AC outlet is easily accessible If you do not intend to use your computer for a long period of time place the computer into Hibernate mode See Using Hibernate Mode page 100 Using the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery Installing the Battery Pack To install the battery pack 1 Turn off the computer and close the LCD screen lid 2 Slide the battery LOCK switch 1 inward 17 18 3 Fit the battery pack into the battery compartment The battery pack should be level with the bottom of the computer 5 Slide the battery LOCK switch outward to secure the battery pack on the computer Bo When your computer is directly connected to AC power and has a battery pack installed it uses power from the AC outlet
43. e 29 Using Special function Buttons page 31 Using the Instant Mode page 32 Using the Built in Camera page 33 Using the Memory Stick page 34 Using Other Modules Memory Cards page 39 Using the Internet page 43 Using the Network LAN page 44 Using the Wireless LAN page 46 Using the Wireless WAN page 53 Using the Bluetooth Function page 57 Using the GPS Function page 62 26 Using the Keyboard 27 Your keyboard has additional keys that perform model specific tasks Combinations and Functions with the Fn Key Some keyboard functions can be used only after the operating system is finished launching Combinations Feature Functions Fn 2 F2 speaker switch Turns on and off the built in speakers and the headphones Fn a F3 F4 volume Changes the volume level To increase the volume keep pressing the Fn F4 keys or press the Fn F4 keys and then the t or key To decrease the volume keep pressing the Fn F3 keys or press the Fn F3 keys and then the or amp key Fn F5 F6 brightness control Changes the LCD brightness of your computer screen To increase lighting intensity keep pressing the Fn F6 keys or press the Fn F6 keys and then the or gt key To decrease lighting intensity keep pressing the Fn F5 keys or press the Fn F5 keys and then the or amp key Fn L amp F7 display output Toggles among your computer screen an external display
44. e or solid state drive has a high storage density and reads or writes data in a short time However it can be easily damaged if improperly used If the built in storage device is damaged the data cannot be restored To prevent losing data you should be careful when handling your computer Features and options in this section may not be available on your computer See the specifications to find out about the configuration of your computer To avoid damaging your hard disk drive Do not subject your computer to sudden movements Keep your computer away from magnets Do not place your computer in a location subject to mechanical vibration or in an unstable position Do not move your computer while the power is on Do not turn off the power or restart your computer while reading or writing data to the hard disk drive Do not use your computer in a place subject to extreme changes in temperature OooOcovoOCcRdR Do not remove the hard disk drive from your computer To avoid damaging your solid state drive Q Do not turn off the power or restart your computer while reading or writing data to the solid state drive OY Do not remove the solid state drive from your computer 117 Handling the Display LAN Adapter To help you keep the display LAN adapter at hand the display LAN adapter is designed to be attached to the AC adapter To attach the display LAN adapter to the AC adapter The appearance of your AC adapter may be different from
45. e user password in the BIOS setup screen The user password is provided to lock your built in storage device Once you set the user password you will have to enter the password along with the power on password if set after the VAIO logo appears l You cannot start your computer with the master password If you forget the master password or the keyboard fails which is critical to password entry no bypass is possible and the data stored on the built in storage device will not be accessible There is NO RESET of this password You will have to replace the built in storage device at your own expense and lose all the data originally stored on the device Be sure to write down the master password and keep it safe and private from other people 93 To add the hard disk password 1 2 Turn on the computer Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears ay If you have set the power on password enter your power on password Press the lt or gt key to select Security to display the Security tab select Hard Disk Password and then press the Enter key The Hard Disk Password entry screen appears Select Enter Master and User Passwords and press the Enter key Select Continue on the warning screen and press the Enter key Enter the master password twice and press the Enter key The password should be up to 32 alpha
46. ection briefly describes how to change the main settings of your VAIO computer Among other things you will learn how to use and customize the look of your Sony software and utilities Setting the Password page 86 Using the VAIO Control Center page 96 Using the Power Saving Modes page 97 Using the VAIO Power Management page 102 Protecting the Hard Disk page 104 DOODO 86 Setting the Password In addition to the Windows password you can use BIOS functions to set two types of passwords to protect your computer the power on password and the hard disk password Once you have set the power on password you will be prompted to enter the password after the VAIO logo appears to start your computer The power on password allows you to protect your computer from unauthorized access The hard disk password provides additional security for the data stored on your built in storage device If you set the hard disk password other users will not be able to access the data without knowing the password even if the password protected built in storage device is removed from your computer and is installed in another computer 87 Adding the Power on Password The power on password is provided to protect your computer from unauthorized access There are two types of the power on passwords the machine password and the user password The machine password is provided for users with administrative rights on the computer to change all the setup o
47. empt to insert an memory card or memory card adaptor of a different type into the memory card slot An incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage to your computer Notes on using the SD memory card Q Your computer has been tested and found compatible only with major memory cards available as of January 2009 However not all memory cards that meet the same specifications as the compatible media are guaranteed of compatibility SD memory cards with capacity of up to 2 GB and SDHC memory cards with capacity of up to 32 GB have been tested and found compatible with your computer The SD memory card slot on your computer does not support the high speed data transfer feature of the SD memory card and the SDHC memory card 43 Using the Internet Before using the Internet you need to sign up with an Internet Service Provider ISP and set up devices required for connecting your computer to the Internet The following types of Internet connection services may be available from your ISP Oooeceoo Fiber to the Home FTTH Digital Subscriber Line DSL Cable modem Satellite Dial up For detailed information on devices required for the Internet and how to connect your computer to the Internet ask your ISP Z To connect your computer to the Internet using the wireless LAN function you need to set up the wireless LAN network See Using the Wireless LAN page 4
48. erformance of your computer will not be guaranteed if you enable the features 149 Printing What should do if cannot print a document Q Q Q Make sure your printer is on and the printer cable is securely connected to the ports on the printer and your computer Make sure your printer is compatible with the Windows operating system installed on your computer You may need to install the printer driver software before you use your printer See the manual that came with your printer for more information If your printer is not functioning after your computer resumes from a power saving mode Sleep or Hibernate then restart the computer If the bidirectional communication functions are provided with your printer disabling the functions on your computer may enable printing Follow these steps Click Start and Control Panel Click Printer under Hardware and Sound Right click the printer icon and select Properties Click the Ports tab Click to cancel the Enable bidirectional support check box Click OK This disables the bidirectional communication functions of the printer such as data transfer status monitoring and remote panel oar ON 150 Microphone What should do if my microphone does not work Q Your computer is not equipped with the microphone jack You cannot use an external microphone Q Your sound input device may have been incorrectly configured To configure the sound input device follow th
49. ese steps 1 Close all open programs Click Start and Control Panel Click Hardware and Sound Click Manage audio devices under Sound a Ff O N On the Recording tab select the desired device for sound input and click Set Default How can prevent microphone feedback Microphone feedback occurs when the microphone receives the sound from a sound output device such as a speaker To prevent this problem Q Keep the microphone away from a sound output device Turn down the volume of the speakers and the microphone 151 Speakers What should do if do not hear sound from the built in speakers Q Q Q Q Q If you are using a program that has its own volume control make sure the volume control is properly set See the program s help file for more information The volume may have been turned off by the Fn F2 keys Press them once again The volume may have been minimized by the Fn F3 keys Keep pressing the Fn F4 keys to turn up the volume loud enough to hear sound Check the Windows volume controls by clicking the volume icon on the taskbar Your sound output device may have been incorrectly configured To change the sound output device see How do change the sound output device page 155 What should I do if my external speakers do not work m ODODO Check the suggestions in What should I do if do not hear sound from the built in speakers page 151 Make sure your speakers are properly
50. han the maximum This is normal Because your computer s CPU utilizes a type of CPU speed controlling technology for power conservation purposes System Properties may display the current CPU speed instead of the maximum speed What should do if Windows does not accept my password and returns a message Enter Onetime Password If you enter a wrong power on password three times consecutively the Enter Onetime Password message appears and Windows will not start Slide in the direction of gt on the switch and hold the power switch for more than four seconds to check that the power indicator light turns off Wait for 10 or 15 seconds then restart your computer and enter the correct password When entering the password check that the Num lock and Caps lock indicators are unlit If both or either of the lights is lit press and hold the Fn key and press the Num Lk key or simply press the Caps Lock key to turn off the indicator before entering the password 125 What should do if my game software does not work or it keeps crashing O Check the web site of the game if there are any patches or updates to download Q Make sure you have installed the latest video driver software OQ On some VAIO models the graphics memory is shared with the system The optimal graphic performance in this case is not guaranteed What should do if cannot remember the power on password If you have forgotten the power on password contact VAIO Link to
51. han the IEEE 802 11b standard 47 The IEEE 802 114 standard is a wireless LAN standard using the 5 GHz band The IEEE 802 11n draft standard is a wireless LAN standard using the 2 4 GHz or 5 GHz band Wireless LAN devices using the 2 4 GHz band cannot communicate with devices using the 5 GHz band because the frequencies are different The 2 4 GHz band used by wireless LAN compatible devices is also used by other various devices Although technologies to minimize interference from other devices that use the same band are employed on wireless LAN compatible devices such interference may cause lower communication speed narrower communication range or broken wireless connections The communication speed varies depending on the distance between communication devices existence of obstacles between such devices the device configuration the radio conditions and the software in use In addition communications may be cut off depending on the radio conditions The communication range varies depending on the actual distance between communication devices existence of obstacles between such devices the radio conditions the ambient environment that includes existence of walls and materials of such walls and the software in use Actual communication speed may not be as fast as the one displayed on your computer Deploying IEEE 802 11b and IEEE 802 119 products on the same wireless network may reduce the communication speed due to radio interference
52. harge q_ Illuminates while the battery pack is charging See Charging the Battery Pack page 19 for more information Built in MOTION EYE camera Illuminates while the built in camera is in use Media Access Illuminates while data is being read from or written to a memory card such as the Memory Stick and the SD memory card Do not place the computer into Sleep mode or turn it off when this indicator is lit When the indicator is unlit the memory card is not in use Disc drive 6 Illuminates while the built in storage device is running to read or write data Do not place the computer into Sleep mode or turn it off when this indicator is lit Num lock Press the Fn Num Lk keys to activate the numeric keypad Press it a second time to deactivate the numeric keypad The numeric keypad is not active when the indicator is unlit Caps lock Press the Caps Lock key to type letters in uppercase Letters appear in lowercase if you press the Shift key while the indicator is lit Press the key a second time to turn off the indicator Normal typing resumes when the Caps lock indicator is unlit Scroll lock Press the Fn Ser Lk keys to change how you scroll the display Normal scrolling resumes when the Scroll lock indicator is unlit The Ser Lk key functions differently depending on the program you are using and does not work with all programs WIRELESS llluminates when one or more wireless options are enable
53. he VAIO Smart Network window QO To successfully obtain location information your current location must be free of obstacles Move around to find an optimum location for receiving GPS information 146 Display Why did my screen go blank Q Your computer screen may go blank if the computer loses power or enters a power saving mode Sleep or Hibernate If the computer is in LCD Video Sleep mode press any key to bring the computer back into Normal mode See Using the Power Saving Modes page 97 for more information Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit If your computer is using battery power make sure the battery pack is installed properly and is charged See Using the Battery Pack page 17 for more information If the display output is directed to the external display press the Fn F7 keys See Combinations and Functions with the Fn Key page 27 for more information What should do if do not see proper images or videos Q m Be sure to select Highest 32 bit for the display colors before using video image software or starting DVD playback Selecting any other option may prevent such software from displaying images successfully To change the display colors follow these steps 1 Right click on the desktop and select Personalize 2 Click Display Settings 3 Select Highest 32 bit under Colors Do not change the display resoluti
54. her devices Bluetooth devices incorporate technology that minimizes interference from other devices using the same wavelength however communication speed and connection range may be reduced Interference from other devices may also stop communications altogether Connection capability is affected by distance and obstructions You may need to move your computer away from obstacles or closer to the device to which it is connected Identify and remove obstacles between your computer and the device to which it is connected Why can t use the services supported by the connected Bluetooth device Connection is only possible for services also supported by the computer with the Bluetooth function For more details search for Bluetooth information using Windows Help and Support 143 Can use a device with Bluetooth technology on airplanes With Bluetooth technology your computer transmits a radio frequency of 2 4 GHz Sensitive locations such as hospitals and airplanes may have restrictions on use of Bluetooth devices to avoid radio interference Check with facility staff to see if use of the Bluetooth function on the computer is permitted Why can t use the Bluetooth function when log onto my computer as a user with a standard user account The Bluetooth function may not be available to a user with a standard user account on your computer Log onto the computer as a user with administrative rights Why can t use the Bluetooth dev
55. ices when switch users If you switch users without logging off your system the Bluetooth devices will not work Be sure to log off before switching users To log off your system click Start the arrow next to the Lock button and Log Off Why can t exchange business card data with a mobile phone The business card exchange function is not supported 144 What should do if do not hear sound from my headphones or audio video controller Check the SCMS T settings If your headphones or audio video controller does not support SCMS T content protection you need to connect the device using the Advanced Audio Distribution Profile A2DP Follow these steps 1 Click Start Control Panel Hardware and Sound and Bluetooth Devices 2 Right click the icon for the device that you want to connect using the A2DP and select Control 3 Click to cancel the Connect to a device only if it supports SCMS T content protection check box under SCMS T Settings 145 GPS What should do if cannot use the GPS function Q Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer Q Make sure the GPS icon is selected in the VAIO Smart Network window What should do if cannot obtain location information or if the current location obtained is incorrect Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer Q Make sure the GPS icon or the WLAN icon is selected in t
56. ing part of the growing VAIO community visit the web site at http www club vaio com Q For online purchases visit the web site at http Awww sonystyle europe com Q For other Sony products visit the web site at http Awww sony net When you contact VAIO Link by telephone have the serial number of your VAIO computer ready at hand The serial number is located on the bottom the back panel or inside the battery compartment of your VAIO computer Ergonomic Considerations You will be using your computer as a portable device in a variety of environments Whenever possible you should attempt to take account of the following ergonomic considerations for both stationary and portable environments Position of your computer Place the computer directly in front of you 1 Keep your forearms horizontal 2 with your wrists in a neutral comfortable position 3 while using the keyboard or the pointing device Let your upper arms hang naturally at your sides Take frequent breaks while using your computer Excessive use of the computer may strain eyes muscles or tendons Furniture and posture Sit in a chair with good back support Adjust the level of the chair so your feet are flat on the floor A footrest may make you more comfortable Sit in a relaxed upright posture and avoid slouching forward or leaning far backwards Viewing angle of the computer s display Use the display s tilti
57. ith its printed circuit side down Do not touch the printed circuit on the SIM card Be sure to hold your computer firmly before inserting or removing the card Do not damage the SIM card in any way either by bending or exerting pressure on the card Reinstall the battery pack Make sure the battery pack is installed properly 55 56 Starting the Wireless WAN Communications To start the wireless WAN communications 1 2 4 5 Turn on the WIRELESS switch Click the button next to or above the WWAN icon in the VAIO Smart Network window Make sure the WIRELESS indicator light turns on Launch the GlobeTrotter Connect 3G Connection Manager or specified software by telecom operator depending on your model country or area Enter your PIN code when prompted Click Connect For more information on how to use the wireless WAN function see the help file included with the VAIO Smart Network software or your telecom operator s documentation For further information on the wireless WAN function visit the VAIO support web site at http www vaio link com troubleshoot wwan regularly 57 Using the Bluetooth Function You can establish wireless communications between your computer and other Bluetooth devices such as another computer ora mobile phone You can transfer data between these devices without cables at a range of up to 10 meters in an open area Notes on using the Bluetooth function Q The data tra
58. itor port your computer screen and the external display can function as a single desktop The procedure for using the Multiple Monitors function depends on the video controller used in the computer See the specifications to find out about the configuration of your computer You can move the cursor from one display to the other This allows you to drag objects such as an open application window or a toolbar from one display to the other 81 To use the Multiple Monitors function Your external display may not support the Multiple Monitors function Certain software applications may not be compatible with Multiple Monitors settings Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function Otherwise the computer may not return to Normal mode If you set different colors on each display do not expand a single window across two displays Otherwise your software may not work properly Set fewer colors or a lower resolution for each display Q On models with the Intel Graphics Media Accelerator 1 Right click on the desktop and select Personalize 2 Click Display Settings 3 Follow the on screen instructions to change the settings Q On models with the NVIDIA or ATI video controller 1 Click Start and Control Panel 2 Click Adjust screen resolution under Appearance and Personalization 3 Right click the number 2 monitor and select Attached 4
59. keyboard when you complete the Windows setup the key configuration will be mismatched To change the keyboard configuration follow these steps 1 Click Start and Control Panel 2 Click Clock Language and Region and click Regional and Language Options 3 Change the settings as desired What should do if cannot enter certain characters with the keyboard If you cannot enter U I O P J K L M and so on the Num Lk key may be activated Check that the Num lock indicator light is unlit If the Num lock indicator is lit press the Num Lk key to turn it off before entering these characters 154 Floppy Disks Why doesn t the Safely Remove Hardware icon appear on the taskbar when the drive is connected Your computer does not recognize the floppy disk drive First make sure the USB cable is properly connected to the USB port If you need to secure the connection wait a few moments for the computer to recognize the drive If the icon still does not appear follow these steps 1 a fF ON Close all programs that are accessing the floppy disk drive Wait until the indicator light on the floppy disk drive turns off Push the eject button to remove the disk and disconnect the USB floppy disk drive from your computer Reconnect the floppy disk drive by plugging the USB cable into the USB port Restart the computer by clicking Start the arrow next to the Lock button and Restart What should do if cannot write data to a flop
60. le distance away from the set Use only specified peripheral equipment and interface cables Otherwise problems may occur Do not use cut or damaged connection cables If your computer is brought directly from a cold location to a warm one moisture may condense inside the computer In this case allow at least one hour before turning on the computer If any problems occur unplug the computer and contact VAIO Link Make sure you disconnect the AC adapter and remove the battery pack before cleaning your computer To avoid losing data when your computer is damaged back up your data regularly 110 Donot exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer The LCD screen may be sensitive to pressure or added stress and exerting pressure may damage the screen or cause it to malfunction Q To open the computer grasp the LCD screen lid on the center with one hand and gently lift the lid O Usea carrying case specially designed to carry your computer 111 Handling the Built in Camera Q Do not touch the lens protection cover of the built in camera as it may cause scratches on the cover and such scratches will appear on the captured images QO Do not let the direct sunlight get into the lens of the built in camera regardless of your computer s power state as it may cause the camera to malfunction QO Clean the lens protection cover of the built in camera with a blower brush or a s
61. lize and click Display Settings Advanced Settings and the Adaptor tab The displayed value may be different from the actual amount of memory on your computer What should I do if my screen is dark Press the Fn F6 keys to brighten your computer screen 148 What should do if the LCD brightness of my screen changes The LCD brightness setting adjusted with the Fn F5 F6 keys is temporary and may be restored to the original setting when your computer returns to Normal mode from Sleep or Hibernate mode To save your preference for the brightness follow these steps 1 Right click the power status icon on the taskbar and select Power Options Click Change plan settings under the current power plan Click Change advanced power settings Select the Advanced settings tab Double click Display oa Ff WO ND Adjust the LCD brightness setting in the item for brightness adjustment What should do if the external display remains blank If you cannot change the display output with the Fn F7 keys you need to change the settings for the external display with the VAIO Control Center To change the settings launch the VAIO Control Center select the control item for the external display and then click to select the check box for changing the options to detect the external display Then use the Fn F7 keys to change the display output Why isn t Windows Aero running The Windows Aero features are disabled by default on your computer P
62. lloon do not appear page 70 to change the settings 2 Drag the Noise Canceling Control slider toward Mic or Mic to select your desired noise canceling level A The slider should be at the center of the range to yield the optimum level Dragging the slider all the way to Mic does not bring the noise canceling function fully into effect 3 Click Apply Confirm that the noise canceling effect is satisfactory and then click OK 70 What to do if the icon and the balloon do not appear When the noise canceling function icon W CO is not on the taskbar and the balloon message does not pop up from the icon change the noise canceling function settings To display the balloon message and the icon Click Start and Control Panel Click Hardware and Sound Click Manage audio devices under Sound On the Playback tab double click the speakers or headphones icon Click the Enhancements tab Click to select the Noise Canceling Function check box and click Modify Settings oa fF wWN If the Disable all enhancements check box is selected click to cancel the check box 7 Click to select the Display an icon for the noise canceling headphones in the task tray or Display a message when noise canceling headphones are connected check box 8 Click OK Connecting a Display LAN Adapter A display LAN adapter may be supplied with your computer to expand connectivity Features and options in this section may not be available on your computer
63. logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Sony Corporation is under license Other trademarks and trade names are those of their respective owners 160 The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license Other trademarks and trade names are those of their respective owners SD Logo is a trademark SP SDHC Logo is a trademark 2A CompactFlash is a trademark of SanDisk Corporation MultiMediaCard is a trademark of MultiMediaCard Association HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC PlaceEngine is a registered trademark of Koozyt Inc PlaceEngine was developed by Sony Computer Science Laboratories Inc and is licensed by Koozyt Inc e XMB and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc AVCHD is a trademark of Panasonic Corporation and Sony Corporation All other names of systems products and services are trademarks of their respective owners In the manual the or marks are not specified Specifications are subject to change without notice All other trademarks are trademarks of their respective owners Not all the software listed above may be delivered with your model See the online specifications to find out what software is available for your model 161 Notice
64. ltiple Monitors Function page 80 CuoUoOvovoCODODSO Connecting a USB Device page 83 64 Using the Noise Canceling Headphones A pair of noise canceling headphones may be supplied with your computer Features and options in this section may not be available on your computer See the specifications to find out about the configuration of your computer The noise canceling headphones are equipped with a built in microphone that catches ambient noise and outputs an antiphase sound to reduce the noise 65 66 Before You Use the Noise Canceling Headphones Q a You can enable the noise canceling function only when the supplied noise canceling headphones are connected to the headphones jack that supports this function The noise canceling function does not work on sound output with the following devices Q External speakers Q Headphones without the noise canceling function Q Sound output devices connected to your computer via a Bluetooth connection The noise canceling function cannot be fully in effect unless you properly wear the headphones Be sure to fit earpieces of the headphones tightly into your ears If you feel that the noise canceling function has little effect adjust the earbud position in the earpieces of the noise canceling headphones or replace the earbuds with a pair in another size A pair of medium size earbuds is attached to the earpieces by default and there should be an extra pair in each small and
65. luetooth function of the device you want to communicate with is on See the other device s manual for more information If the device you want to communicate with is already communicating with another Bluetooth device it may not be found or it may not be able to communicate with your computer To allow other Bluetooth devices to communicate with your computer follow these steps 1 Click Start Control Panel Hardware and Sound Bluetooth Devices and Bluetooth Settings 2 Click the Options tab and select the Allow Bluetooth devices to find this computer check box 142 What should do if other Bluetooth devices cannot connect to my computer Q Q Q Check the suggestions in What should I do if I cannot find the Bluetooth device I want to communicate with page 141 Make sure the other devices are authenticated The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices on radio wave quality and on the operating system or the software in use Move your computer and Bluetooth devices closer to each other Why is my Bluetooth connection slow a Q Q The data transfer speed depends on the obstructions and or the distance between the two devices on the radio wave quality and on the operating system or the software in use Move your computer and Bluetooth devices closer to each other The 2 4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by ot
66. mputer Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears ay If you have set the power on password enter your power on password Press the lt or gt key to select Security to display the Security tab select Hard Disk Password and then press the Enter key The Hard Disk Password entry screen appears Select Enter Master and User Passwords and press the Enter key Enter the current password for Enter Current Hard Disk Master Password and press the Enter key Press the Enter key without entering any letter for the remaining fields Press the Enter key when the success message appears Press the Esc key and then the lt or gt key to select the Exit tab Press the or key to select Exit Setup and press the Enter key At the confirmation prompt press the Enter key 96 Using the VAIO Control Center The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior To use the VAIO Control Center 1 Click Start All Programs and VAIO Control Center 2 Select the desired control item and change the settings 3 Once finished click OK The setting of the desired item has been changed For more information about each option see the help file included with the VAIO Control Center Some of the control items will not be visible if you open the VAIO Cont
67. nction What should do if my computer becomes unstable when it enters a power saving mode while the built in camera is in use If your computer automatically enters Sleep or Hibernate mode change the corresponding power saving mode setting To change the setting see Using the Power Saving Modes page 97 136 Networking What should do if my computer cannot connect to a wireless LAN access point Q Q O You need to connect the display LAN adapter supplied to your computer before configuring or accessing your network Connection capability is affected by distance and obstructions You may need to move your computer away from obstructions or closer to any access point you may be using Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer Make sure power to the access point is on If you want to connect your computer to a wireless LAN access point using the 5 GHz band make sure the option to use the 5 GHz band or both the 2 4 GHz and 5 GHz bands is selected on the WLAN tab in the VAIO Smart Network settings window Wireless LAN communication IEEE 802 11a standard using only the 5 GHz band available on selected models only is disabled by default Follow these steps to check the settings 1 Click Start and Control Panel 2 Click View network status and tasks under Network and Internet 3 Click Connect to a network to confirm that your access point is selected Make sure the en
68. nfirmation window for attribute changes click to select the Apply changes to this folder only check box and click OK 133 10 Once again click Advanced on the General tab 11 Click to cancel the Compress contents to save disk space check box under Compress or Encrypt attributes and click OK 12 Click OK in the window for changing properties 13 Click OK in the confirmation window for attribute changes Running the Disk Cleanup with the Compress old files option selected may compress the files required for the Instant Mode If the files are compressed after running the Disk Cleanup follow the above procedure to restore the files What should I do if my computer screen LCD goes blank The screen saver has been enabled and is now activated Press any key on the keyboard to resume the Instant Mode 134 Built in Camera Why does the viewfinder show no images or poor quality images Q The built in camera cannot be shared by more than one software application Exit the current application before launching another O The viewfinder may show some noise for example horizontal streaks if you view a rapid moving object This is normal and does not indicate a malfunction Q If the problem persists restart your computer Why are captured images poor in quality Q The images captured under the fluorescent light may show reflections of light QO A dark portion in captured images may appear as a noise Q If the lens protection co
69. ng feature to find the best position You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position Adjust the brightness level of the display as well Lighting Choose a location where windows and lights do not cause glare and reflection on the display Use indirect lighting to avoid bright spots on the display Proper lighting adds to your comfort and work efficiency Positioning an external display When using an external display set the display at a comfortable viewing distance Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor Getting Started This section describes how to get started using your VAIO computer Locating Controls and Ports page 10 About the Indicator Lights page 15 Connecting a Power Source page 16 Using the Battery Pack page 17 Shutting Down Your Computer Safely page 24 Updating Your Computer page 25 DOODO COD 10 Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages Front WIRELESS switch page 46 page 53 page 57 2 WIRELESS indicator page 15 OFF 7oWRLESS ONS SS 3 SD memory card slot page 39 5 MacicGare 4 Media Access indicator page 15 i 5 Memory Stick slot page 34 6 Built in MOTION EYE camera indicator page 15 Built in MOTION EYE camera page 33 LCD screen page 106 9 Built in microph
70. nication failure Follow the steps in What should I do if my computer cannot connect to a wireless LAN access point page 136 to change the settings What are channels Q a Wireless LAN communication uses divided frequency bands known as channels Third party wireless LAN access point channels may be preset to different channels from Sony devices If you are using a wireless LAN access point see connectivity information contained in the manual that came with your access point Why does the network connection stop when change the encryption key Two computers with the wireless LAN function may lose a peer to peer network connection if the encryption key is changed You can either change the encryption key back to the original profile or re enter the key on both computers so the key matches 140 How do display the VAIO Smart Network window To display the VAIO Smart Network window on the desktop follow these steps 1 2 3 Click Start All Programs and VAIO Control Center Click Network Connections and VAIO Smart Network Click Advanced in the right pane A For information on the VAIO Smart Network software see the help file included with the software What should do if my computer cannot connect to the wireless WAN Q Q Q Make sure the battery pack is installed properly and charged Make sure the SIM card is 3G data enabled and activated by your telecom operator When inserting the SIM card be sure t
71. nough When the temperature is below approximately 15 C the battery pack VGP BPS15 or VGP BPL15 is designed to charge to approximately 80 capacity In this case the charge indicator light remains on while the computer is connected to the AC adapter However this is normal and does not indicate a malfunction 132 Instant Mode What should do if the Instant Mode does not start O To start the Instant Mode turn off the computer or place it into Hibernate mode and then press the XMB button When your computer is on pressing the XMB button starts the VAIO Media plus software by default Q If the files required for the Instant Mode which are stored with the hidden attribute in the C drive s InstantON folder are compressed the Instant Mode would not start To uncompress the files follow the steps below Click Start All Programs Accessories and Run Enter C InstantON for Open and click OK Click Folders on the toolbar Right click InstantON in the folder list in the left pane and click Properties Click Advanced on the General tab of the window for changing properties oar won Click to cancel the Compress contents to save disk space check box under Compress or Encrypt attributes click OK and then go to step 12 If this check box is not selected proceed to step 7 J Click to select the Compress contents to save disk space check box and click OK 8 Click Apply in the window for changing properties 9 Inthe co
72. nsfer rate varies depending on the following conditions m Obstacles such as walls located between devices Distance between devices Material used in walls Proximity to microwaves and cordless telephones Radio frequency interference and other environmental conditions Device configuration Type of software application Type of operating system Use of both wireless LAN and Bluetooth functions at the same time on your computer COOCOO OOOD DOD Size of file being exchanged Large files may occasionally be corrupted during continuous transfer due to limitations of the Bluetooth standard and electromagnetic interference in the environment Q All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained Even if standards are met individual device performance specifications and operation procedures can vary Data exchange may not be possible in all situations 58 Video and audio may not be synchronized if you play videos on your computer with audio output from a connected Bluetooth device This is a frequent occurrence with Bluetooth technology and is not a malfunction The 2 4 GHz band with which Bluetooth devices or wireless LAN devices work is used by various devices Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length Simultaneous use of the Bluetooth function and wireless communication devices however may
73. nstable Sony assumes no liability for any malfunctions arising from changes to the settings Do not exert pressure on the LCD screen lid with the lid closed as it may scratch the LCD screen or soil it 107 Using the Power Source See the specifications to find out about the configuration of your computer Q Do not share the AC outlet with other power consuming equipment such as a photocopier or a shredder You can purchase a power strip with a surge protector This device helps prevent damage to your computer caused by sudden power surges in an electrical storm for example Q Do not place heavy objects on the power cord Q To disconnect the cord pull it out by holding the plug Never pull the cord itself Q Unplug your computer from the AC outlet if you are not planning to use the computer for a long period of time O Make sure that the AC outlet is easily accessible Q When the AC adapter is not used unplug it from the AC outlet Q Use the AC adapter supplied with your computer or genuine Sony products Do not use any other AC adapter as it may cause a malfunction 108 Handling Your Computer Q Clean the cabinet and the LCD panel with a soft cloth which is dry or lightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine as these may damage the finish of your computer If you drop a solid object or any liquid onto your com
74. numeric characters including spaces long Enter the user password twice and press the Enter key The password should be up to 32 alphanumeric characters including spaces long At the confirmation prompt press the Enter key Press the Esc key and then the lt or key to select the Exit tab Press the or key to select Exit Setup and press the Enter key At the confirmation prompt press the Enter key 94 Changing Removing the Hard Disk Password To change the hard disk password 1 2 OoOo NOOA Ff Turn on the computer Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears ay If you have set the power on password enter your power on password Press the lt or gt key to select Security to display the Security tab select Hard Disk Password and then press the Enter key The Hard Disk Password entry screen appears Select Change Master Password or Change User Password and press the Enter key Enter the current password once and then a new password twice Press the Enter key Press the Enter key when the success message appears Press the Esc key and then the lt or gt key to select the Exit tab Press the or key to select Exit Setup and press the Enter key At the confirmation prompt press the Enter key 95 To remove the hard disk password 1 2 oO AN DO R Turn on the co
75. o follow the procedure in Inserting a SIM Card page 54 Your mobile phone network needs to cover your area Contact your network provider for information on the network coverage Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer Make sure the WWAN icon is selected in the VAIO Smart Network window You may need to manually enter Access Point Name APN information in your connection manager software In such a case make sure you have correct APN information from your telecom operator See the help file included with the connection manager software for more information Check that your connection manager software has detected your computer successfully It may take some time for the software to detect the computer 141 Bluetooth Technology What should do if other Bluetooth devices cannot find my computer m Q m m Make sure both devices have the Bluetooth function enabled Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer You cannot use the Bluetooth function when your computer is in a power saving mode Bring the computer back to Normal mode then turn on the WIRELESS switch Your computer and the device may be too far apart Wireless Bluetooth technology works best when the devices are within 10 meters of each other What should do if cannot find the Bluetooth device want to communicate with m m Check that the B
76. oft brush If the cover is extremely dirty wipe it off with a soft dry cloth Do not rub the cover as it is sensitive to pressure 112 Handling Discs Q Fingerprints and dust on the surface of a disc may cause read errors Always hold the disc by its edges and central hole as shown below Proper care of the disc is essential to its continuous reliability Do not use solvents Such as benzine thinner alcohol commercially available cleaners or anti static spray which may cause damage to the disc For normal cleaning hold the disc by its edges and use a soft cloth to wipe the surface from the center out If the disc is badly soiled moisten a soft cloth with water wring it out well and use it to wipe the surface of the disc from the center out Wipe off any remaining moisture with a dry soft cloth Never affix an adhesive label to a disc This will affect the use of the disc and may result in irreparable damage 113 Using the Battery Pack m m Oooo Oooveoo m Do not leave battery packs in temperatures above 60 C such as in a car parked in the sun or under direct sunlight Battery life is shorter in a cold environment This is due to decreased battery efficiency at low temperatures Charge battery packs at temperatures between 15 C to 30 C Lower temperatures require longer charging time For safety reasons battery charging may be suspended at higher or lower temperatures Certain rechargeable b
77. omputer is in Sleep or Hibernate mode or off It does not reduce the battery charge time while the computer is in Normal mode To enable the battery care function and the quick charge function Click Start All Programs and VAIO Control Center Click Power Management and then Battery Charge Functions Click to select the Enable Quick Charge Function check box in the right pane and click Apply Click Advanced Click to select the Enable Battery Care Function check box Select the desired maximum charge level Click OK To check the battery charge capacity Follow steps 1 and 2 in To enable the battery care function and the quick charge function above click Advanced and check detailed information If the battery charge capacity is low replace the battery pack with a new genuine Sony battery pack NO oO Ff WD Using the Battery Life Conserving Wallpaper You can conserve your battery life just by setting the specific wallpaper as your desktop background To set the battery life conserving wallpaper 1 Click Start All Programs and VAIO Control Center 2 Click Display and then Long Battery Life Wallpaper Setting 3 Click Set Long Battery Life Wallpaper At the confirmation prompt click OK 22 Removing the Battery Pack 23 You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack while the computer is in Sleep mode To remove the
78. on page 80 for more information The procedure for selecting a display depends on the video controller used in the computer See the specifications to find out about the configuration of your computer 79 To select a display You may not be able to display the same contents on your computer screen and the external display or projector at the same time depending on the type of your external display or projector Turn on the external display before turning on your computer Q On models with the Intel Graphics Media Accelerator 1 Right click on the desktop and select Personalize 2 Click Display Settings 3 Follow the on screen instructions to change the settings Q On models with the NVIDIA video controller 1 Click Start and Control Panel 2 Click Additional Options 3 Click NVIDIA Control Panel 4 Select the display setup option under Display 5 Follow the on screen instructions to change the settings Q On models with the ATI video controller When the computer has an external display connected you can change the Main Clone setting as follows 1 Click Start All Programs and Catalyst Control Center 2 Click CCC 3 Follow the on screen instructions to change the settings See the help file for more information 80 Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays For example if you have an external display connected to the mon
79. on or colors while using video image software or playing DVDs as it may cause unsuccessful playback display or unstable system operations Additionally it is recommended you disable your screen saver before starting DVD playback If the screen saver is enabled it may be activated during DVD playback and prevent it from running successfully Some screen savers have been found to even change the display resolution and colors 147 Why doesn t my screen display a video Q If the display output is directed to the external display and the external display is disconnected you cannot display a video on your computer screen Stop video playback change the display output to the computer screen and then restart video playback See Selecting Display Modes page 78 for changing the display output Alternatively you can press the Fn F7 keys to change the display output See Combinations and Functions with the Fn Key page 27 for more information The video memory of your computer may be insufficient for displaying high resolution videos In this case lower the resolution of the LCD screen To change the screen resolution follow these steps 1 Right click on the desktop and select Personalize 2 Click Display Settings 3 Move the slider under Resolution to the left to reduce or to the right to increase the screen resolution A You can check the total amount of the graphics and video memory available Right click on the desktop select Persona
80. on the pointing stick once Double click Press the left button or tap on the pointing stick twice in a row Right click Press the right button 5 once In many applications this action displays a shortcut menu Drag Push the pointing stick in your desired direction while pressing the left button Alternatively you can tap on the pointing stick twice in a row and without taking your finger off the pointing stick on the second tap push it in your desired direction To drop the dragging object take your finger off the pointing stick Scroll Push the pointing stick up and down or sideways while pressing the center button 4 The scroll function is available only with applications that support a pointing stick scroll feature Ao The pointer may move on its own on rare occasions which does not indicate a malfunction Leave the pointing stick untouched for a while The pointer will behave normally The tip on the pointing stick is a consumable You can replace it with one of the supplied spare caps when necessary You can disable enable the pointing stick while a mouse is connected to your computer To change the pointing stick settings use the VAIO Control Center Be sure to connect a mouse before disabling the pointing stick If you disable the pointing stick before connecting a mouse you will be able to use only the keyboard for pointer operations 31 Using Special function Buttons Your computer is equipped with special butt
81. one monaural Keyboard page 27 Power switch Power indicator page 15 3 Charge indicator page 15 114 Disc drive indicator page 15 Your computer supports only the Duo size Memory Stick 11 1 Built in speakers stereo 2 Pointing stick page 29 3 Left button page 29 4 Center button page 29 5 Right button page 29 6 Window arrangement button S2 button page 31 XMB Xross Media Bar button S1 button page 31 Num lock indicator page 15 9 Caps lock indicator page 15 Scroll lock indicator page 15 SIM card slot page 53 2 Battery connector page 17 12 Right 1 Hi Speed USB USB 2 0 port page 83 2 1 0 port page 72 Supports high full low speeds 13 Left 14 1 DC IN port page 16 2 Hi Speed USB USB 2 0 port page 83 3 Headphones jack page 65 page 75 Supports high full low speeds 15 About the Indicator Lights Your computer is equipped with the following indicator lights Indicator Functions Power Illuminates in green when the computer is on blinks slowly in orange while the computer is in Sleep mode and turns off when the computer is off or in Hibernate mode C
82. one or business use telephone lines multi line business telephone Public telephone subscriber line Private branch exchange PBX 45 46 Using the Wireless LAN Using the Wireless LAN WLAN all your digital devices with the built in WLAN function communicate freely with each other through a network A WLAN is a network in which a user can connect to a Local Area Network LAN through a wireless radio connection The WLAN supports all normal Ethernet connectivity but with the added benefits of mobility and roaming You can still access information Internet intranet and network resources even in the middle of a meeting or as you move from one place to another You can communicate without an access point which means that you can communicate with a limited number of computers ad hoc Or you can communicate through an access point which allows you to create a full infrastructure network a In some countries using WLAN products may be restricted by the local regulations e g limited number of channels Therefore before activating the WLAN function read the wireless LAN regulations guide carefully WLAN uses the IEEE 802 11a b g standard or the IEEE 802 11n draft standard which specifies the type of technology used The standard includes the encryption methods Wired Equivalent Privacy WEP which is a security protocol Wi Fi Protected Access 2 WPA2 and Wi Fi Protected Access WPA Proposed jointly by the IEEE and Wi
83. ons to help you use specific functions of the computer Special function button Functions XMB Xross Media Bar button S1 button While the computer is off or in Hibernate mode the XMB button starts the Instant Mode See Using the Instant Mode page 32 for more information on the Instant Mode While the computer is in Normal mode this S1 button executes the default task You can change the default assignment with the VAIO Control Center Window arrangement button S2 button By default the window arrangement button S2 button shows all open windows by resizing the windows so that they all fit on the desktop To resume the previous window state press this button once again 32 Using the Instant Mode The Instant Mode enables you immediately to play music and videos or access the Internet without launching the Windows operating system For detailed information on operating instructions see the help file included with the Instant Mode Starting the Instant Mode To start the Instant Mode your computer must be off or in Hibernate mode To start the Instant Mode 1 Press the XMB button on the computer The Main Menu of the Instant Mode appears on the screen 2 Select your desired operation from the menu Exiting the Instant Mode Select Power Off from the Main Menu to exit the Instant Mode Sharing Bookmarks between the Instant Mode and the Internet Explorer You can export import your Favorites
84. or the battery charging status See Charging the Battery Pack page 19 for more information When is my computer using AC power When your computer is directly connected to the AC adapter it uses AC power even if the battery pack is installed When should recharge the battery pack Q When the battery charge level falls below 10 Q When both the charge and power indicator lights blink Q When you have not used the battery pack for a long period of time When should replace the battery pack If the battery pack quickly runs out of power after fully charged it may be reaching the end of its life and should be replaced To check the battery charge capacity see To check the battery charge capacity page 21 131 Should be concerned that the installed battery pack is warm No it is normal for the battery pack to be warm when it is powering your computer Can my computer enter Hibernate mode while using battery power Your computer can enter Hibernate mode while using battery power but some software programs and peripheral devices prevent the system from entering Hibernate mode If you are using a program that prevents the system from entering Hibernate mode save your data frequently to avoid losing data See Using Hibernate Mode page 100 for information on how you can manually activate Hibernate mode Why doesn t the charge indicator light go out when it seems the computer and the AC adapter have been connected for long e
85. ork to wireless devices by providing an access point not supplied The access point bridges the wireless and wired LAN and acts as a central controller for the wireless LAN network The access point coordinates transmission and reception from multiple wireless devices within a specific range The access point will select which channel to use on an infrastructure network For details on how to select the channel that will be used by the access point see the manual that came with your access point Wy 51 To connect to a wireless network 1 Make sure an access point is set up See the manual that came with your access point for more information Turn on the WIRELESS switch Click the button next to or above your desired wireless option s in the VAIO Smart Network window Make sure the WIRELESS indicator light turns on Wireless LAN communication IEEE 802 114 standard using only the 5 GHz band available on selected models only is disabled by default To enable 5 GHz band communication you need to select the option to use the 5 GHz band or both the 2 4 GHz and 5 GHz bands on the WLAN tab in the VAIO Smart Network settings window Right click J or J on the taskbar and select Connect to a network Select the desired access point and click Connect Z For WPA PSK or WPA2 PSK authentication you must enter a passphrase The passphrase is case sensitive and must be a text string between 8 and 63 characters in length or a hexade
86. ot hear the sound from the sound output device connected to the HDMI output port optical output port or headphones jack You need to change the sound output device if you want to hear sound from the device connected to a port such as the HDMI output port optical output port or headphones jack For the detailed procedure see How do change the sound output device page 155 Why do sound interruptions and or dropped frames occur when play high definition videos such as those recorded with the AVCHD digital video camcorder Playing high definition videos requires substantial hardware resources such as CPU GPU or system memory performance on your computer During the video playback some operations and or functions may become unavailable and sound interruptions dropped frames and playback failure may occur depending on the configuration of your computer 157 Memory Cards What should do if cannot find any memory card icons in the Computer window The Memory Stick Duo icon and the SD MMC icon do not appear in the Computer window before you insert either of the media Insert a Memory Stick or a memory card It may take some time but both icons eventually appear in the Computer window What should do if cannot use a Memory Stick that was formatted on a VAIO computer on other devices You may need to reformat your Memory Stick Formatting a Memory Stick erases all data including music data previously saved on it Before
87. otection technology developed by Sony Use a Memory Stick with the MagicGate logo to use this feature Q Except for your personal use it is against the copyright law to use any audio and or image data you recorded without prior consent from the respective copyright holders Accordingly the Memory Stick with such copyrighted data can be used only within the law Donotinsert more than one Memory Stick into the slot Improper insertion of the media may damage both your computer and the media 39 Using Other Modules Memory Cards Using the SD Memory Card Your computer is equipped with an SD memory card slot You can use this slot to transfer data among digital cameras camcorders music players and other audio video devices Before you use the SD memory card The SD memory card slot on your computer supports the following memory cards Q SD memory card Q SDHC memory card Q MultiMediaCard MMC For the latest information on compatible memory cards see Finding More about Your VAIO Computer page 5 to visit the appropriate support web site 40 To insert an SD memory card Your computer is supplied with a slot protector in the SD memory card slot Remove the slot protector before you use the slot Locate the SD memory card slot Push the SD memory card slot protector so that the protector pops out Gently take hold of the SD memory card slot protector and pull it out of the slot Hold the SD memory card with the arrow f
88. ow light compensation option in the properties window 34 Using the Memory Stick The Memory Stick is a compact portable and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products such as digital cameras mobile phones and other devices Because it is removable it can be used for external data storage Before You Use the Memory Stick The Memory Stick slot on your computer can accommodate Duo size media and supports Memory Stick PRO Duo and Memory Stick PRO HG Duo with high speed data transfer and large data capacity capabilities For the latest information about the Memory Stick visit the Memory Stick web site at http www memorystick com en 35 Inserting and Removing a Memory Stick To insert a Memory Stick Your computer is supplied with a slot protector in the Memory Stick slot Remove the slot protector before you use the slot Locate the Memory Stick slot Push the Memory Stick slot protector so that the protector pops out Gently take hold of the Memory Stick slot protector and pull it out of the slot Hold the Memory Stick with the arrow facing upward and pointing toward the slot a fF Q N a Carefully slide the Memory Stick into the slot until it clicks into place The Memory Stick is automatically detected by your system and the contents on the Memory Stick are displayed If nothing appears on the desktop click Start Computer and double click the
89. ptions in the BIOS setup screen as well as to start the computer The user password is provided for the standard users to allow for changing some of the BIOS setup options as well as starting the computer To set the user password you must first set the machine password Once you have set the power on password you cannot start your computer without entering the password Be sure not to forget the password Write down your password and keep it safe and private from other people If you forget the power on password and need assistance to reset it a password reset fee will be charged and your computer may need to be sent in for service to reset the password 88 To add the power on password machine password 1 2 Turn on the computer Press the F2 key when the VAIO logo appears The BIOS setup screen appears If not restart the computer and press the F2 key several times when the VAIO logo appears Press the lt or gt key to select Security to display the Security tab select Set Machine Password and then press the Enter key On the password entry screen enter the password twice and press the Enter key The password can be up to 32 alphanumeric characters including spaces long Select Password when Power On under Security and press the Enter key Change the setting from Disabled to Enabled Press the lt or gt key to select Exit select Exit Setup and then press the Enter key At the confirmation prompt press
90. puter shut down the computer unplug it and remove the battery pack You may want to have the computer checked by qualified personnel before operating it again Do not drop your computer or place any objects on top of the computer Do not place your computer in a location subject to Heat sources such as radiators or air ducts Direct sunlight Excessive dust Moisture or rain Mechanical vibration or shock Strong magnets or speakers that are not magnetically shielded Ambient temperature of more than 35 C or less than 5 C High humidity Do not place electronic equipment near your computer The electromagnetic field of the equipment may cause the computer to malfunction CuoOvovoUODOD Use your computer on a solid stable surface We advise not to use your computer while you are standing or walking as it may cause the computer to slip out of your hands resulting in damage 109 We advise not to use your computer directly on your lap The temperature of the bottom of the unit may rise during normal operation and after an extended period of time could cause discomfort or burns Provide adequate air circulation to prevent internal overheating Do not place your computer on porous surfaces such as rugs blankets couches or beds or near draperies that may block its air vents Your computer uses high frequency radio signals and may cause interference to radio or TV reception If this occurs relocate the computer a suitab
91. py disk Q Make sure the floppy disk is properly inserted in the drive Q If the disk is inserted properly and you are still unable to write data to it the disk may be full or write protected You can either use a floppy disk that is not write protected or disable the write protect feature 155 Audio Video How do turn off the Windows startup sound To turn off the Windows startup sound follow these steps 1 a fF WO N Click Start and Control Panel Click Hardware and Sound Click Manage audio devices under Sound On the Sounds tab click to cancel the Play Windows Startup sound check box Click OK How do change the sound output device If you do not hear sound from the device connected to a port such as the USB port HDMI output port optical output port or headphones jack you need to change the device for sound output 1 a Aa ON Close all open programs Click Start and Control Panel Click Hardware and Sound Click Manage audio devices under Sound On the Playback tab select the desired device for sound output and click Set Default What should I do if I find dropped frames during video playback If the video playback window is overlaid with another window you may encounter dropped frames or find playback performance degraded Move the video playback window to where it will be unlikely to be overlaid with another window or maximize the video playback window 156 What should I do if do n
92. re the data for the system recovery is stored If your computer includes a solid state drive you might want to reduce the volume of the recovery partition by following these steps 1 N Oo of ff WO Insert a recovery disc into an external optical disc drive not supplied while your computer is on turn off the computer and then turn it on once again Press the F11 key when the VAIO logo appears during the startup process s recovery disc s you created upon delivery of your computer Select your keyboard layout from the drop down list and click Next Select your operating system and click Next Click VAIO Recovery Center Click Restore Complete System and Start Select Skip and click Next You will be prompted to select whether or not to keep the VAIO Value added contents Select No and click Next Follow the on screen instructions The above procedure involves system recovery The applications and data you added on the storage drive before reducing the volume of the recovery partition will all be lost Once you have reduced the volume of the recovery partition you need the recovery disc s for later system recovery 128 How do check the volume of the recovery partition Your built in storage device contains the recovery partition where the data for the system recovery is stored To check the volume of the recovery partition follow these steps 1 Click Start right click Computer and select Manage 2 Click Di
93. rol Center as a standard user 97 Using the Power Saving Modes You can take advantage of the power management settings to conserve battery life In addition to the normal operating mode your computer has two distinct power saving modes Sleep and Hibernate When using battery power you should be aware that the computer will automatically enter Hibernate mode if the remaining battery life becomes short regardless of the power management setting you select If the battery charge level falls below 10 you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack Using Normal Mode This is the normal state of the computer when it is in use The green power indicator light is lit in this mode 98 Using Sleep Mode Sleep mode turns off the LCD screen and places the built in storage device s and the CPU into a low power consumption mode The orange power indicator light blinks slowly in this mode If you do not intend to use your computer for a long period of time while it is disconnected from AC power place the computer into Hibernate mode or turn it off To activate Sleep mode Click Start the arrow next to the Lock button and Sleep A Your computer comes out of Sleep mode quicker than out of Hibernate mode Sleep mode uses more power than Hibernate mode If the battery runs out of power while your computer is in Sleep mode you will lose all
94. s 00 0 0 ceeceeeeeeeesneeeeeeeneeeeeeees 64 Using the Noise Canceling Headphones 05 65 Connecting a Display LAN Adapter cccseeeeee 71 Connecting an Optical Disc Drive c eee 73 Connecting External Speakers or Headphones 75 Connecting an External Display cceeeeeeeees 76 Selecting Display Modes cccceeeeeteeeeetteeeseteeees 78 Using the Multiple Monitors Function seee 80 Connecting a USB Device eececeeeeeeeeteeeteteeeteneees 83 Customizing Your VAIO Computer 85 Setting the PASSWOI cccccceceeeeeeeeeeteeeeteteeeteeee 86 Using the VAIO Control Center sessen 96 Using the Power Saving Modes n se 97 Using the VAIO Power Managemert cee 102 Protecting the Hard Disk cccceeeeeeeeeeeseeneeeeeeeee 104 PrOCaUtiOns aicicuivetiaceeagicacattiptehschducibedaievulin attagtetaianeyeerts 105 Pointing D VICC ccceeeseceeeeeeeeeeeeeeeseeeeeeeeseneeereeee 152 Handling the LCD Screen seese 106 KEYDOAI eitea ee ttinids eiaei tanar aeiiae aA a 153 Using the Power Source eseese 107 Floppy DISKS usneseni nuni iaa A inaa E AREN Eana KANEN ANA 154 Handling Your Computel ccccccecceeeeeeeeeeseteeees 108 Audio Video nedre eaii iaeiiai ipie iiir eek 155 Handling the Built in Camera sseeseeeeeeeeeeeeeeen 111 Memory CardS seeseeeesieesieesrreerrerrerrrrsrrssrirerrreerns 157 Handling DISCS eria D 112 Peripherals ses
95. sk Management under Storage in the left pane The volume of the recovery partition and the total volume of the C drive are displayed in the Disk 0 row in the center pane 129 System Security How can protect my computer against security threats such as viruses The Microsoft Windows operating system is preinstalled on your computer The best way to protect your computer against security threats such as viruses is to download and install the latest Windows updates regularly You can get important Windows updates by doing the following Your computer must be connected to the Internet to download the updates Connect to the Internet Double click the Windows Security Alerts icon on the taskbar Follow the on screen instructions to set up automatic or scheduled updates How do keep my antivirus software updated You can keep the McAfee software program current with the latest updates from McAfee Inc To download and install the latest security updates follow these steps Your computer must be connected to the Internet to download the updates 1 Click Start All Programs McAfee and McAfee SecurityCenter 2 Click the button located at the upper left corner of the window to update the software 3 Follow the on screen instructions to download updates See the help file included with your software program for more information 130 Battery How do find the battery charging status You can check the charge indicator f
96. spirran ieena E E 158 Using the Battery Pack eee 113 Trademarks deed cach ecassrcatdt lected pdeap dace tesiauad erated aserderiaies 159 Using Headphones ieee IIE PRG eieess tect cts strata ctopet E cede tattnesetes 161 Handling the Memory Stick 0 cecceeeeeeeeeeeeeeseeeees 115 Handling the Built in Storage Device a an 116 Handling the Display LAN Adaptet ceceee 117 Troubleshooting areala a 118 COMPUTE aei eaen aaa Eee aa a a tated as 120 System Security ccceeeeeceeeeeeeeeeeeeeeeeeeeeeeeeeseaeeee 129 PANE ana E atte tetas 130 Instant Mode cen acnanicirnnii ioei a 132 Built in Camera n aeie eo thianais aa anelai ieni 134 Networking naen E R 136 Bluetooth Technology ssssesssssssssrrrssserrnresrrrnnnsernnna 141 E Ae EEEE E ea T 145 Display sioi Serdan Ale ee dae 146 PIRIOU e a T E NE A 149 Microphone seose E aa 150 Speakers i ioen ee ae isone uena naani niata 151 Before Use Congratulations on your purchase of this Sony VAIO computer and welcome to the on screen User Guide Sony has combined leading edge technology in audio video computing and communications to provide state of the art personal computing experience External views illustrated in this manual may look slightly different from those of your computer Ee How to find specifications Some features options and supplied items may not be available on your computer To find out about the configuration of your computer visit
97. st shock hazards You can select the sensitivity level of the built in shock sensor to set the appropriate protection level Be aware that the solid state drive is not included in the scope of the VAIO HDD Protection utility Activating VAIO HDD Protection To protect your hard disk drive against shock hazards you must first activate the VAIO HDD Protection To activate VAIO HDD Protection 1 a fF ON Click Start All Programs and VAIO Control Center Click Security and Hard Disk Drive Protection Settings Select the Activate hard disk drive protection check box Select one of the desired sensitivity level Click OK For more information see the help file included with the software The VAIO HDD Protection is designed to minimize possibilities of damage to hard disk drives and user data It does not ensure 100 data protection under any circumstances Hard disk drive protection is disabled before Windows launches and during a shift to Hibernate or Sleep mode system recovery and system shutdown 105 Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage Handling the LCD Screen page 106 Using the Power Source page 107 Handling Your Computer page 108 Handling the Built in Camera page 111 Handling Discs page 112 Using the Battery Pack page 113 Using Headphones page 114 Handling the Memory Stick page 115 Handling the Built
98. stops responding Q Q Q If your computer stops responding while a software application is running press the Alt F4 keys to close the application window If the Alt F4 keys do not work click Start the arrow next to the Lock button and Shut Down to turn off your computer If your computer does not turn off press the Ctrl Alt Delete keys and click the arrow next to the Shut down button and Shut Down If the Windows Security window appears click Shut Down If your computer still does not turn off slide in the direction of gt on the switch and hold the power switch until the computer turns off Turning off your computer with the Ctrl Alt Delete keys or the power switch may cause loss of unsaved data Unplug the AC adapter and remove the battery pack Wait three to five minutes Reinstall the battery pack plug the AC adapter and then slide the power switch in the direction of gt on the switch to turn on your computer Try reinstalling the software Contact the software publisher or designated provider for technical support 123 Why doesn t my computer enter Sleep or Hibernate mode Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or Hibernate mode To restore your computer to Normal mode 1 2 3 Close all open programs Click Start the arrow next to the Lock button and Restart If your computer does not restart press the Ctrl Alt Delete keys
99. tching the noise canceling circuit and does not indicate a malfunction Be sure to use the supplied noise canceling headphones You can plug the headphones supplied with a Walkman to your computer but the noise canceling function of the computer will not work well with such headphones 68 Connecting the Noise Canceling Headphones To connect the noise canceling headphones 1 Plug the headphones cable into the headphones jack Q The B icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message pops up from the icon o When the ive icon is on the taskbar the noise canceling function is disabled Right click the icon and select Enable Noise Canceling Function from the menu If no icon is on the taskbar see What to do if the icon and the balloon do not appear page 70 to change the settings 69 Adjusting the Effect of the Noise Canceling Function The noise canceling headphones supplied with your computer is configured to yield the optimum effect by default If you feel that the noise canceling function is not fully in effect you may be able to adjust the effect with the Noise Canceling Control slider on the Noise Canceling Headphones window To adjust the effect of the noise canceling function 1 Right click the icon on the taskbar and select Settings The Noise Canceling Headphones window appears o If no icon is on the taskbar see What to do if the icon and the ba
100. ver is dirty you cannot take a clear shot Clean the cover See Handling the Built in Camera page 111 What should do if captured images contain dropped frames and audio interruptions Q The effect settings on your software application may cause dropped frames See the help file included with your software application for more information Q There may be more software applications running than your computer can handle Exit the applications that you are not currently using Q The power management function of your computer may be active Check the CPU performance 135 What should I do if movie playback shows dropped frames when my computer is running on the battery The battery pack is running out of power Connect your computer to an AC power source What should do if captured images flicker This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output frequency and shutter speed To reduce flicker noise change the direction of the camera or the brightness of camera images In some software applications you can set an appropriate value to one of the camera properties e g light source flicker etc to eliminate flicker noise Why is the video input from the built in camera suspended for a few seconds The video input may be suspended for a few seconds if Q a shortcut key with the Fn key is used Q the CPU load increases This is normal and does not indicate a malfu

VGN-P series - Sony Europe

Contents

Download Pdf Manuals

Related Search

Related Contents