Headset Functions 1. Charging Your Headset : To
Contents
1. noisehush on A innovation you can hear Instruction Manual Headset Functions 1 Charging Your Headset To prolong the battery life it is recommended to fully charge your headset The red LED indicator will light up showing that the unit is being charged When charging is complete the red LED will turn off When the battery is running low the LED will flash red N Pairing Your Headset 1 First turn the phone OFF and then back ON again to refresh its memory 2 Bring the phone to about 30cm from NoiseHush N550 headset 3 Find the Bluetooth menu in your phone Turn Bluetooth ON See your phone s user guide 4 With the NoiseHush headset OFF press and hold the Function button for about 8 seconds until the LED flashes blue to red 5 Your headset is now ready to be discovered by your Bluetooth phone 6 Perform a Bluetooth device discovery on your phone to add a new device It takes a few seconds to discover other Bluetooth devices around you 7 When Bluetooth devices are found the phone will display NoiseHush N550 Scroll to it and press OK to confirm that you want to pair with it 8 Enter the Passkey 0000 when your phone prompts you The phone will now pair with the headset 9 If your Bluetooth phone menu supports it set as authorized or add to trusted devices 10 Again select the NoiseHush N550 or press the Function button to connect with the phone 11 If the pairing is no2. t successful the Headset will return to the standby mode after awhile please repeat the pairing process to try the pairing again 12 Refer to your phone s user manual for any additional steps Blue LED indicator blinks once every 4 seconds when it s paired with your phone and once every 8 seconds when it is not paired Note To conserve battery NoiseHush N550 will automatically turn off if it s not paired with your phone Contact Us For additional help or to purchase accessories such as AC DC please visit us at www noisehush com 1 Microphone 6 Volume Down 2 Function Button 7 Forward 3 Volume Up 8 Charging Port 4 LED Indicator 9 Strap Holder Strap not included 5 Play Back A 10 3 5mm Audio Output 3 Power ON your Headset Press and hold the Function button for 4 seconds until you hear a short beep and the indicator light flashes blue 3 times Now the headset will enter into STANDBY MODE If no paired phone is in range or no phone has been paired the N550 will enter Standby mode 4 Power OFF your Headset Press and hold the Function button 4 seconds until you hear a short beep and the indicator light flashes red 3 times 5 Answering Ending a Call Press the Function button once when there is an incoming call to Answer Press the Function button once again to end the call 6 To Activate Voice Dialing Rapidly press the Function button twice then
3. you will hear two beeps Say the voice tag as soon as you hear the beep Make sure your phone supports the voice dialing function and you have prerecorded the voice tag into your phone See your phone s user guide 7 Redialing Last Number Press and hold Function button for 2 seconds until you hear the beep then release immediately 8 To Adjust the Volume Click the Volume Up or Volume Down button during a call Adjust to the desired level The volume level you set will be remembered by the NoiseHush N550 and used on the next call To use these functions your phone device must support the Bluetooth Handsfree Profile 9 Music Features 1 Play Pause Function Once the music is selected from your phone See your phone s user guide press the Function button once for music to pause and press again to play 2 To Forward gt gt arrow down Press the Function button to skip and play the next song 3 To Play Back lt lt arrow up Press the Function button to return to the last song Note Make sure your phone supports AVRCP Bluetooth Profile for remote control functions and A2DP for Music capability 10 Disconnecting Please turn off paired N550 headset or disconnect the headset from the Bluetooth menu of your phone www noisehush com
Download Pdf Manuals
Related Search