Océ User manual - Océ
Contents
1. Unit mm A 205 4 E d A 393 Y A 1619 1021 B y Y as y 410 760 718 49g 100 P lt 656 gt lt 2419 gt Main body DF 609 LU 202 FS 520 PI 502 A 19 Y 950 le 2142 gt Main body DF 609 LU 202 FS 520 PI 502 side view FS 520 Precautions for installation and use S Reminder Be sure to allow a clearance of 200 mm or more at the back of this machine for the ventilation duct FS 520 2 Precautions for installation and use 2 3 Finisher FS 520 2 6 FS 520 Precautions for installation and use External view No Name Description 1 Finisher door Opens to the internal finisher to allow clearing mishan dled paper replenishing staples and emptying waste basket of punch kit 2 Primary Main tray Holds sets output in Non sort mode Collate mode off set or Staple mode 3 Secondary Sub tray Holds sets output in Non sort mode Internal view No Name Description 1 Secondary Sub tray convey Opens rightward to remove mishandled paper ance lever 2 Paper inserter conveyance Opens leftward to remove mishandled paper lever 3 Punch kit PK 512 PK 513 Punches file holes in the output copies option 4 Entrance lever Opens downward to remove mishandled paper 5 Stacke2. FS 520 2 15 2 Precautions for installation and use 2 8 Specifications Finisher FS 520 Item Description Name FS 520 Finisher type Offset catch tray Output tray Primary main and secondary sub trays Function Straight delivery collated uncollated Offset delivery collate and offset uncollate and offset Staple delivery corner staple 2 staples Paper Types See page 2 14 for details Paper Sizes See page 2 14 for details Paper tray capacity See page 2 14 for details Maximum power consumption 80 W or less Dimensions 424 674 5 when primary main tray is attached 790 5 when the tray is pulled out W x 656 D x 990 H mm Weight Approx 60 kg FS 520 3 Copying operations Copying operations 3 3 Copying operations 3 1 Using Finisher FS 520 The Finisher FS 520 has a primary main tray and a secondary sub tray each of which has the following output modes Output to the primary main tray Mode Description Non sort Non sort mode simply means that the offset stacker finisher modes are not se lected Copies will be stacked upon exit without being offset by sorted sets Collate Collate mode outputs multiple copies of the original set having each sorted set offset by 30mm upon exit Uncollate Uncollate mode groups together multiple copies of each original and offsets the sets by 30mm upon exit
3. LA 1 oblique staple 2 parallel staples Punch v Paper should be placed only in the lower tray of the paper inserter Upper tray cannot be used v Staple 1 staple 2 staples and Punch can be used in combination FS 520 3 17 3 Copying operations 1 Place a set of paper in the lower tray of the paper inserter Staple 1 staple 2 staples Place paper face UP Punch Place paper face UP Lower tray Align the guide plate with the paper 2 Press Staple mode selection button and Punch button to select the desired mode Start Stop button Staple mode selection button Lo 6 Punch button To select Staple 1 staple 2 staples press Staple mode selection button to turn on the desired mode lamp To select Punch press Punch button to turn on the lamp To use Staple in combination turn on the desired Staple mode lamp To select only the Punch mode turn off all the other mode lamps 3 Press Start Stop button 2 Do you want to stop the output operation 3 Press Start Stop button on the operation panel of paper inserter 3 18 FS 520 l Finisher adjustment FS 520 outlines Finisher adjustment FS 520 outlines 4 4 Finisher adjustment FS 520 outlines Use this function to make the following the fine adjustments on Finisher FS 520 For details see CS650 User manual Q Detail T
4. Staple Staple mode offsets and staples each sorted set Combined with the output modes above except staple mode you can also choose to output face up or face down and output front to back or back to front Example Make 3 copied sets from 4 original sheets 4 2 3 1 l I l Non sort Staple 4 Collated Uncollated 4 3 Lh 1 Y 3 4 xA 4 4 NOA 2 staples 2 ANO 1 4 4 1 1 oblique 3 Offset by 30mm BS Offset by 30mm NOA Ss NOA NNN FS 520 3 3 Copying operations Output to the secondary sub tray Mode Description Collate Collate mode outputs multiple copies of the original set No offset output is avail able Uncollate Uncollate mode groups together multiple copies of each original No offset out put is available Combined with the output modes above you can also choose to output face up or face down and output front to back or back to front Example Make 3 copied sets 2 3 1 Face down Face down Face up Face up collated uncollated collated uncollated 8 4 FS 520 Copying operations 3 3 1 1 Non sort collate uncollate output to the primary main tray A machine with Finisher FS 520 installed is set to collate output to the primary main tray by default regardless of whether or not to be equipped with other optional devices Please select
5. 520 Introduction FS 520 Precautions for installation and use Precautions for installation and use 2 DO O 2 Precautions for installation and use 2 1 Caution notations and labels Safety precaution notations and labels appear on this machine at the following positions Be very careful that an accident does not occur when operations such as removing paper misfeeds are performed Finisher FS 520 To avoid injury DO NOT put your hand on top of the printed sheets Be sure to hold both sides of the printed sheets when removing them and DO NOT leave your hand on the printed sheets while the primary main tray goes up S Reminder Do not remove caution labels or notations If any caution label or caution notation is soiled please clean to make legible f you cannot make them legible or if the caution label or notation is damaged please contact your service representative FS 520 2 3 Precautions for installation and use Space requirements To ensure that machine operation consumables replenishing part replacement and regular maintenance can easily be performed adhere to the recommended space requirements detailed below Be sure to choose a level and solid floor for the installation place Combination size the main body and options may be different for the installation environment
6. Paper Size Secondary Standard Size sub tray SRA3 Ga SRA4 Gay A3 Ga B4 Foolscap A4 ca g B5 cw g A5 Ga B6 A6 8K 16K cu g 13 x 19 cu 12 x 18 Ca 11 x 17 ca 8 5 x 14 Ca 8 5 x 11 Cu g 5 5 x 8 5 c u Custom Size Max 330 mm x 487 mm to Min 100 mm x 148 mm Tab Paper A4 8 5 x 11 Y Primary Standard Size main tray SRA3 ca SRA4 ca A3 Ca B4 Ca Foolscap A4 ca J B5 Normal A5 ca Q B6 ca 8K ca 16K wg 12 x 18 Ca 11 x 17 a 8 5 x 14 cu 8 5 x 11 2 4 5 5 x 8 5 1 9 1 5 5 x 8 5 ca SRAS ca A5 and B6 ca are available for straight output only Custom Size Max 314 mm x458 mm to Min 182 mm x 148 mm 2 Max 314 mm x 458 mm to Min 128 mm x 148 mm for straight output only Tab Paper A4 Qj 8 5 x 11 Y Primary Standard Size main tray SRA4 Ga A3 ca B4 ca Foolscap A4 ca g BS cu g A5 Wd 8K Ca Staple 16K c u 12 x 18 cu 11 x 17 cu 8 5 x 14 Ca 8 5 x 11 ca ug 5 5 x 8 5 y Custom Size Max 314 mm x458 mm to Min 182 mm x 148 mm Tab Paper A4 8 5 x 11 Y Stapling capacity Paper Paper type weight Normal paper High quality Colored paper Coated paper paper 64 to 80 g m 50 sheets 50 sheets 50 sheets 40 sheets 81 to 105 g m 40 sheets 30 sheets 30 sheets 25 sheets 106 to 135 g m 30 sheets 30 sheets 25 sheets 20 sheets 136 to 209 g m 20 sheets 20 sheets 15 sheets
7. the print quantity otherwise unexpected trouble may be caused FS 520 Copying operations 3 3 1 2 Stapling output to the primary main tray Copies will be stapled in this mode Follow the procedure below to select the stapling position and number of staples Top Left Top Right Corner Staple Left Top Right 2 Position Staple Q Detail For detailed specifications see Paper information on page 2 14 and Specifications on page 2 16 1 Position the original 2 Touch Staple on the Copy Screen Stapled sheets will be delivered to the primary main tray The Output Application icon shows the stapling position currently selected orig Count Offre O Nierory 0 0003 Rotation Feybrun Devs 1 000 j Full Color x1 0 staple E Auto Paper Select If you want to change the stapling position proceed to the following steps 3 Touch Output Appli on the Copy Screen The Output Application Screen will be displayed FS 520 3 7 Copying operations 4 Touch Staple to select the stapling position Touch OKI to Touch Cancel I nm EE 5 The Staple Setting Screen will be displayed Touch the desired stapling position key to select it Touch OK To restore the previous setting touch Cancel To release the Staple function with the current stapling position setting remained
8. touch Function Off The Output Application Screen will be restored Touch OK on the Output Application Screen The specified output mode icon will be displayed on the Copy Screen 3 8 FS 520 Copying operations 3 S Reminder The primary main tray gradually goes down while printed materials are output DO NOT allow any object to interfere with the operation ofthe tray on the left side of the finisher as any interference may cause damage to the finisher Be careful not to exceed the finisher tray capacity when selecting the print quantity otherwise unexpected trouble may be caused FS 520 3 Copying operations 3 1 3 Collate uncollate output to the secondary sub tray A machine with Finisher FS 520 installed is set to Collate output to the primary main tray by default regardless of whether or not to be equipped with other optional devices Change the output tray and select the desired output mode by following the procedure below Q Detail For detailed specifications see Paper information on page 2 14 and Specifications on page 2 16 1 Position the original 2 Touch Output Appli on the Copy Screen The Output Application Screen will be displayed 3 Select the secondary sub tray as the output tray Touch Output Tray to display the Output Tray Selection Screen 3 10 FS 520 Copying operations 3 Touch the tray position key of the sec
9. Oc User manual Oc FS 520 User manual Oc Technologies B V Copyright 2007 Oc Technologies B V Venlo The Netherlands All rights reserved No part of this work may be reproduced copied adapted or transmitted in any form or by any means without written permission from Oc Oc Technologies B V makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose Further Oc Technologies B V reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revision or changes Edition 2007 08 Trademarks Trademarks Oc Oc FS 520 Oc Doc Exec Oc Image Logic Oc Scan Logic Oc Power Logic Oc Print Exec and Oc Remote Logic are registered trademarks of Oc Technologies B V Adobe and PostScript 3 are registered trademarks of Adobe Systems Incorporated Macintosh is a registered trademark of Apple Computer Inc Microsoft Windows Windows NT Windows 95 98 Windows 2000 Windows XP and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries AutoCAD is a registered trademark of Autodesk Inc Novell is a registered trademark of Novell Inc Netscape Navigator is a regi
10. an output mode by following the procedures below Q Detail You can change the initial output mode in the Utility setting For details see CS650 User manual For detailed specifications see Paper information on page 2 14 and Specifications on page 2 76 1 Position the original 2 Touch Output Appli on the Copy Screen The Output Application Screen will be displayed Output tray positions are indicated as square marks on the front image of the machine and the tray mark currently selected appears highlighted If the primary main tray is not selected touch Output Tray to select it 3 Select the desired output mode For Non sort output cancel both Collate and Uncollate For Collate output touch Collate to highlight it For Uncollate output touch Uncollate to highlight it Select output face Face Down Face Up and output order 1 to N N to 1 as needed Touch 0K to fix setting Touch Cancel to cancel setting FS 520 Copying operations 4 Touch OK on the Output Application Screen The specified output mode icon will be displayed on the Copy Screen S Reminder The primary main tray gradually goes down while printed materials are output DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher as any interference may cause damage to the finisher Be careful not to exceed the finisher tray capacity when selecting
11. ate uncollate output to the primary main tray 3 5 3 1 2 Stapling output to the primary main tray ssesssss 3 7 3 1 3 Collate uncollate output to the secondary Sub tray 3 10 3 1 4 Punching file holes in copies Punch 3 12 3 2 Cover sheet feeding paper inserter 3 15 3 3 Using Finisher FS 520 manually eese 3 17 FS 520 Contents 1 4 Finisher adjustment FS 520 outlines 03 Punch Adjustment 01 Vertical Position Adj 4 3 03 Punch Adjustment 02 Horizontal Position Adj 4 3 03 Punch Adjustment 03 Registration Adjustment 4 3 03 Punch Adjustment 04 Paper Edge Detect Sensor Adj 4 3 06 Paper Inserter Tray Size Adj uurssnnssnrnnnnnnnnnnnnnnnnnnnnnnnnnennn 4 3 07 Output Quantity Limit ss 4 3 08 Curl AdjUstMent ici 1n eee I aed 4 3 Contents 2 FS 520 Introduction Introduction 1 1 Introduction Finisher FS 520 is an optional device newly added to the configuration of CS650 options Please refer to this manual for the operation and safety information on the finisher and keep this manual inside the user manual of the main body readily available for reference Also be sure to read Chapter 1 Introduction Safety Information of the CS650 User manual Oc AG FS
12. ay The Output Application icon shows the number of punch holes and punch position currently selected Orig Count Ofreserye Job DfWewory 0 0003 Rotation Fryorun Deve 1 000 Bt Full Color xi Punch nm Auto Paper Select 3 4 If you want to change the number of punch holes and punch position proceed to the following steps Touch Output Appli on the Copy Screen The Output Application Screen will be displayed Touch Hole Punch fix setting to cancel setting The Hole Punch Screen will be displayed FS 520 3 13 Copying operations 7 S Touch the desired punch key to select it Touch OK Torestore the previous setting touch Cancel To release the Punch function with the current number of punch holes and punch position setting remained touch Function Off The Output Application Screen will be restored Touch OK on the Output Application Screen The specified output mode icon will be displayed on the Copy Screen Reminder Be careful not to exceed the finisher tray capacity when selecting the print quantity otherwise unexpected trouble may be caused FS 520 Copying operations 3 2 Cover sheet feeding paper inserter The Finisher FS 520 with Paper inserter PI 502 installed can attach cover sheets to output copies Using Insert Sheet function cover sheets loaded in the upper and lower tr
13. ays of the paper inserter will be attached as a front cover and or back cover or insertion sheet to output copies and also using Staple mode a covered and stapled book can be made LEE Cover sheet Jum Copied set with Copied set with cover attached in covers and insertions staple mode attached FS 520 3 15 Copying operations VY Upper Lower tray capacity 200 sheets paper or within 30 mm thick each v Use ADF v The cover paper size should be the same as copy paper size v Cover paper loaded in the paper inserter cannot be copied 1 Load cover paper into the upper and lower trays of the paper inserter Upper tray Lower tray c 2 Use Insert Sheet function to attach covers to the output copies FS 520 Copying operations 3 8 3 Using Finisher FS 520 manually The Finisher FS 520 with Paper inserter PI 502 installed can be operated manually using the operation panel provided on the paper inserter Place a set of paper into the lower tray Upper tray cannot be used Available finishing modes according to the optional configuration are described below e Finisher FS 520 Paper inserter PI 502 Staple 1 staple 2 staples e Finisher FS 520 Paper inserter PI 502 Punch kit PK 512 PK 513 Staple 1 staple 2 staples Punch Start Stop button _1 TE 2010 6
14. he target adjustment items vary depending upon the configuration of installed options 03 Punch Adjustment 01 Vertical Position Adj gt Perform this adjustment for the center position of punch holes operated by the Punch Kit PK 512 PK 513 03 Punch Adjustment 02 Horizontal Position Adj gt Perform this adjustment for the position of punch holes in the feeding direction operated by the Punch Kit PK 512 PK 513 03 Punch Adjustment 03 Registration Adjustment gt Perform this adjustment for the skew of the punch position made by the Punch Kit PK 512 PK 513 in duplex copying or cover sheet feeding using the paper inserter 03 Punch Adjustment 04 Paper Edge Detect Sensor Adj gt Perform this adjustment to detect the paper edge to be used as reference point of punching operation 06 Paper Inserter Tray Size Adj gt Perform the size adjustment for the Upper tray and Lower tray of the Paper Inserter PI 502 07 Output Quantity Limit gt Specify the output quantity limit of stapled sets 08 Curl Adjustment gt This adjustment can be used to adjust the compression fixing amount of paper exit decurler roller if any crease appears in printed sheets output from FS 520 FS 520 Finisher adjustment FS 520 outlines FS 520
15. ondary sub tray to highlight it then touch OK 4 Select the desired output mode For Collate output touch Collate to highlight it For Uncollate output touch Uncollate to highlight it Select output face Face Down Face Up and output order 1 to N N to 1 as needed 5 Touch OK on the Output Application Screen The specified output mode icon will be displayed on the Copy Screen S Reminder Be careful not to exceed the finisher tray capacity when selecting the print quantity otherwise unexpected trouble may be caused FS 520 3 11 3 Copying operations 3 1 4 Punching file holes in copies Punch The Finisher FS 520 with Punch kit PK 512 PK 513 installed can punch file holes in output copies S Reminder Do not punch special paper type such as labels trac ng paper etc Otherwise machine trouble may occur Be sure that the side guide plates of the paper tray are securely aligned to the paper otherwise the copies may not be punched in position Ml 21mm p2 o o 80 mm T 80mm F 70mm 9 o 21mm T 5 Q Detail For detailed specifications see Paper information on page 2 14 and Specifications on page 2 76 FS 520 Copying operations 1 2 Position the original Touch Punch on the Copy Screen Punched sheets will be delivered to the primary main tr
16. puts sorted grouped sets to the primary main tray having each set offset by approx 30 mm upon exit e Staple delivery Staples each set with one staple at the corner or two staples along the edge Punch mode is available using Finisher FS 520 with Punch kit PK 512 PK 513 installed Sheet insertion is available using Finisher FS 520 with Post inserter PI 502 installed Paper information Weight Primary main tray 60 to 300 g m Secondary sub tray 50 to 300 g m Staple 60 to 209 g m Capacity Secondary Max 100 sheets sub tray Primary 500 sheets 80 g m n Ca B6 ca 5 5 x 8 5 w main tray 3 000 bue 80 g m A4 2 4 BS W 16K cu u normal 8 5 x 11 a 7 25 x 10 5 ca u 1 500 sheets 80 g m SRA3ca SRA4ca A3 ca B4 ca Fools cap 8K cu 12 x 18 ca 11 x 17 Ca 8 5 x 14 ca Wide size max 320 mm x 450 mm Tray capacity varies depending on paper weight e 80 g m 1 500 sheets 81 135 g m 1 000 sheets 136 209 aim 700 sheets 210 300 g m 500 sheets Primary Max 50 sheets 80 g m per set main tray 2 9 sheets stapled 100 sets 150 417mm in length 50 sets Staple others 10 20 sheets stapled 50 sets 21 30 sheets stapled 30 sets 31 40 sheets stapled 25 sets 41 50 sheets stapled 20 sets Paper Insert Max 200 sheets 50 to 200 g m er PI 502 Upper Low er tray Punch Kit Unlimited PK 512 PK 513 2 14 FS 520 Precautions for installation and use 2 Paper information
17. r conveyance lever Opens lower leftward to remove mishandled paper 6 Staple cartridge Holds staple case to be replaced when supplying staples 7 Stacker unit handle Withdraws unit to allow removal of mishandled paper and replacement of staple cartridge FS 520 2 7 Precautions for installation and use Standard optional equipment DF 609 OC 506 O PK 512 key counter pe main body FS 520 L op ou _ PK 513 FS 520 Precautions for installation and use 2 2 5 Replenishing staples Inserting a new staple cartridge into Finisher FS 520 When the staple cartridge of the Finisher FS 520 becomes empty the Staple Cartridge indicator lights in red in the option status area of the Machine Status Screen Dig Count _ Ofreserye Je OfMenory 0 000 Rotation TEL Drun Dev idy 10 use scanner Em 1 Open the Finisher door 2 Pull out the stacker unit Pull out the stacker unit slowly by holding the stacker unit handle until it stops FS 520 2 9 2 Precautions for installation and use 3 Remove the staple cartridge v ya ST zm ir Hold the lever on the staple UF TS cartridge and then pull the Dace L cartridge down to remove it D Mee CLAN 4 Remove the empty staple case from the staple cartridge 5 Insert the new s
18. stered trademark of Netscape Corp Pentium is a registered trademark of Intel Corporation Energy STARS is a registered trademark of the U S Environmental Protection Agency EPA Products in this publication are referred to by their general trade names In most if not all cases these designations are claimed as trademarks or registered trademarks of their respective companies Trademarks ts Contents 1 Introduction 2 Precautions for installation and use 2 1 Caution notations and labels es 2 3 2 2 Space requirements nenneeneensenenennnenense 2 4 2 3 Finishet FS 520 sj ccccccsccsssssnsctsesctessccens E E 2 6 2 4 Standard optional equipment uuenssnnsnnnenennnnnnnnnnnnnnnnnnnnnnnnnnnnennnnn 2 8 2 5 Replenishing staples ns 2 9 Inserting a new staple cartridge into Finisher FS 520 2 9 2 6 DISPOSING punch waste 5 erinnern iacente uni 2 12 Emptying waste basket of Finisher FS 520 sssss 2 12 2 7 Paper information ironic eere iari en 2 14 2 8 Specifications eree roo toria rot rera a ne neta oo E PN Ese daiar ES ERAN SEE 2 16 FiniSherESD20 m 2 16 3 Copying operations 3 1 Using Finisher FS 520 eee ee tere ttc ratore eret 3 3 Output to the primary main tray eee eeee eee eeeeeeeeeteeeeeeeeteneeeee 3 3 Output to the secondary sub tray eeeceeeeeeeseeeeeeeeeeeteeteeeteeeeees 3 4 3 1 1 Non sort coll
19. taple case into the staple cartridge Do not remove the staples remaining inside the cartridge otherwise the first sheet output after the replenishment will not be stapled FS 520 Precautions for installation and use 2 6 Return the stacker unit to its original position 7 Close the Finisher door FS 520 2 11 2 Precautions for installation and use 2 6 Disposing punch waste Emptying waste basket of Finisher FS 520 When the waste basket of Punch kit PK 512 PK 513 installed in Finisher FS 520 becomes full the Punch Waste Basket indicator lights in red in the option status area of the Machine Status Screen 1 Open the Finisher door 2 Withdraw the waste basket 2 12 FS 520 Precautions for installation and use 2 3 Empty the waste basket 4 Return the waste basket to its original position then close the Finisher door securely FS 520 2 13 Precautions for installation and use 2 7 Paper information Finisher FS 520 provides the following functions e Straight delivery using primary main tray Outputs sorted grouped sets normally to the primary main tray e Straight delivery using secondary sub tray Outputs sorted grouped sets normally to the secondary sub tray e Offset delivery Out
Download Pdf Manuals
Related Search