Quick Start Guide
Contents
1. down button until LED turns off LED Battery Charge Level Above 75 Between 20 and 75 Below 20 Battery is dead During Operation LED Blinking Mode No Light 2Sec Blinking Green to Yellow 1Sec Blinking Green to Yellow 0 Rapid Blinking Green to Yellow Rapid Blinking Green Rapid Blinking Yellow Rapid Blinking Red Action The device should be capable to perform as desired The device will work but for a reduced period Charge if longer recording is desired Charge the device before operation or storage Charge the device before operation or storage Status Device is off or sleeping Device is waiting for a time based trigger Device is waiting for a pressure or temperature trigger Device is waiting for an acceleration trigger Device is recording Battery level is above 75 Device is recording Battery level is below 75 Device is recording Battery level is below 20 Action Mount the device and press the button or store the device Allow it to wait for trigger or hold down button to skip to next trigger or recording Allow it to wait for trigger or hold down button to skip to next trigger or recording Allow it to wait for trigger or hold down button to skip to recording Allow it to continue recording or press X Button to end recording Allow it to continue recording or press button to end reco2. Quick Start Guide SLAM STICK X Mid recommends reading the User Manual prior to using the Slam Stick X This Quick Start Guide may be used as an overview and reference document on the proper use of the device 1 Plug in to charge a Connect the Slam Stick X to a computer via the USB cable provided b Charge your device refer to Charging Instructions in the User Manual 2 Copy files to Computer Copy Documentation and Software folders to a directory on your computer The Documentation folder contains the User Manual Data Sheet and Quick Start Guide 3 Open software Open Slam Stick Lab exe file from the Software folder on your computer 4 Setrates amp triggers a Refer to the section entitled Configuration in the User Manual for a detailed parameters explanation b Refer to Configure Device in the User Manual for instructions and screen views 5 Mount to surface Prior to mounting the device ensure that the intended environment is suitable by referring to the section entitled Operational Environment in the User Manual The section entitled Mounting Instructions in the User Manual provides detailed mounting instructions a The most common form of mounting the device is with the Mid recommended double sided tape provided with your kit Due to the low mass of the product and the strength of the tape this mounting method is sufficient for most applications b Three mounting holes of t
3. he Slam Stick X allow it to be mounted with 4 40 bolts included with your kit allowing the user to better align the device in a desired orientation 6 Press X button Press the X button to begin recording If you have configured the device to wait for a trigger the device will begin waiting after the button is pressed Refer to the LED Status section in the User Manual 7 Plug in to view data Following completion the data recorded by Slam Stick X can be downloaded and viewed using Mid s Slam Stick Lab software Details of the operation of this software are provided in the section entitled Slam Stick Lab Overview in the User Manual The Stick Lab software also enables the user to export the data to a CSV file if desired CE www mide com SLAM STICKX Quick Start Guide 1 LED Status Indication The LED indicator designates battery life specifies operating modes and indicates potential errors When Connected to Power LED Battery Status Fully charged Charging Battery cannot be charged due to extreme temperature Device not operating properly or not connected correctly Action Disconnect from power and use the device for data logging Continue charging Allow the device to reach the allowed charging temperature range 0 C to 45 C If LED indication persists contact Mid for assistance Check connection if problem persists contact Mid for assistance During Battery Check Hold
4. rding Allow it to continue recording or press button to end recording If you experience any issues please refer to the Troubleshooting section in the User Manual MIDE www mide com SLAM STICK X Quick Start Guide
Download Pdf Manuals
Related Search